Instantaneous Differentiation of Functional Isomers via Reactive Flowing Atmospheric Pressure Afterglow Mass Spectrometry

Quantitative analysis of biopolymers in lignocellulosic biomass feedstocks via laser-assisted micro-pyrolysis flowing atmospheric-pressure afterglow high-resolution ambient mass spectrometry

Herein, a diode laser-assisted micro-pyrolysis (LAMP) technique coupled with FAPA high resolution mass spectrometry (HRMS) is demonstrated for fast chemical characterization of lignocellulosic biomass feedstocks. The solid lignocellulosic biomass can be analyzed directly with minimal sample preparation. The mass spectra of the pyrolysis products are interpreted with the aid of data visualization tools such as Kendrick mass defect (KMD) plots and van Krevelen plots. Furthermore, quantitation of lignin/cellulose/hemicellulose, sugar contents of glucan/xylan/galactan/arabinan and lignin monomeric unit S/G is achieved with good accuracy and precision, through multivariate analysis methods, including partial least squares regression (PLSR) and support vector regression (SVR).

Studies of Dopamine Oxidation Process by Atmospheric Pressure Glow Discharge Mass Spectrometry

An atmospheric pressure glow discharge ionisation source was constructed and utilized to study the dopamine (DA) oxidation process coupling with mass spectrometry. During the DA oxidation process catalysed by polyphenol oxidase (PPO), six cationic intermediates were directly detected by the atmospheric pressure glow discharge mass spectrometry (APGD-MS). Combined with tandem mass spectrometry, the structures of the dopamine o-semiquinone radical (DASQ) and leukodopaminochrome radical (LDAC^●) intermediates and structures of the isomers of dopaminochrome (DAC) and 5,6-dihydroxyindole (DHI) were further characterised with the introduction of 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) and deuterium oxide (D₂O) to APGD-MS. Meanwhile, UV-Vis studies confirmed the important role of PPO in catalyzing the DA oxidation reaction. Based on APGD-MS studies, a possible mechanism could be proposed for DA oxidation catalysed by PPO. Furthermore, APGD-MS could provide possibilities for the effective detection and characterisation of short-lived intermediates, even in complicated systems.

Effect of Dopants and Gas-Phase Composition on Ionization Behavior and Efficiency in Dielectric Barrier Discharge Ionization

Cold plasma-based ionization techniques allow for soft ionization of a wide variety of chemical compounds. In this chemical ionization mechanism, the atmosphere plays a crucial role in ionization. Knowing its influence is critical for the optimization of analysis conditions and interpretation of resulting spectra. This study uses soft ionization by chemical reaction in transfer (SICRIT), a variant of dielectric barrier discharge ionization (DBDI), that allows for a controlled atmosphere to investigate atmosphere and dopant effects. The influence of eight makeup gas compositions (dry nitrogen, room air, and nitrogen-enriched with either water, HCl, MeOH, hexane, NH₃, and fluorobenzene) on the ionization with SICRIT was investigated. Fifteen compound classes, comprising alkanes, polyaromatic hydrocarbons (PAHs), terpenes, oxygen-containing terpenes, alkylphenols, chlorophenols, nitrophenols, trialkylamines, triazines, phthalates with or without ether groups, aldehydes, ketones, fatty acid methyl esters (FAMEs), and polyoxy-methylene ethers (OMEs) were measured via gas chromatography SICRIT high-resolution mass spectrometry (GC-SICRIT-HRMS). The different atmospheres were compared in terms of generated ions, ion intensities and fragmentation during ionization. Measurements of reactant ions were performed for a better understanding of the underlying mechanisms. All 15 compound classes were mostly softly ionized. For most compound classes and atmospheres, protonation is the dominant ionization mode. The highest number of compounds ionized via protonation was observed in dry nitrogen, followed by room air and humid nitrogen. The study should work as a guideline for the choice of atmosphere for specific compound classes and the interpretation of spectra generated under a specific atmosphere.

Characterization of ginsenoside structural isomers from mixtures using in situ methylation with direct analysis in real-time ionization tandem mass spectrometry

Characterization of structural isomers of bioactive molecules is important for recognizing their functions, but it has been challenging due to their highly similar structures. As the main bioactive constituents of Panax ginseng, ginsenosides have different structural isomers attributed to the aglycone structure and glycosylation sites as well as stereochemistry of sugar groups attached. This work demonstrated a simple and robust in situ methylation reaction with tetramethylammonium hydroxide (TMAH) using ambient ionization source of direct analysis in real time (DART) to characterize saponin structural isomers. The DART ion source provides favorable conditions to methylate hydroxyl groups of ginsenoside instantaneously with TMAH, and it can ionize the methylated products at the same time. Methylated ginsenoside stereoisomers even with subtle structure differences generated very different mass signals from full-scan MS and tandem MS. High-resolution mass spectrometry aided the assignment of molecular structures of the various precursor and fragment ions from different ginsenosides, which provided structural information for both the aglycone skeleton and the sugar moieties in ginsenosides. The presented method was successfully used for the identification of ginsenosides in Panax ginseng, and saponin isomers were characterized without the need for chromatographic separation and/or tedious offline sample pretreatment.

Glow flow ionization mass spectrometry of small molecules. A comparison of a glow flow ionization source ('GlowFlow') with electrospray ionization and atmospheric pressure chemical ionization

RATIONALE

Ionization by atmospheric pressure gas discharge has been employed for a long time in mass spectrometry. Inductively coupled plasma mass spectrometry is an exemplar, and widely used for elemental analysis. The technique has less uptake in organic mass spectrometry. We describe a simple source design that can be readily implemented in most atmospheric pressure ionization (API) systems and compare its performance with that of electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI).

METHODS

An in-house designed helium gas discharge source (referred to as 'GlowFlow') was used on a Xevo G2-S time-of-flight mass spectrometer. The GlowFlow source was transferred to a compatible Xevo TQ-S triple-quadrupole mass spectrometer using an ultrahigh-performance liquid chromatograph inlet. Its performance was compared to that of Waters ESI and APCI sources.

RESULTS

Preliminary results of GlowFlow on the Swansea instrument are presented to establish context and include analysis of low-molecular-mass polymers, benzoic acid and cinnamic acid. Comparison of performance on the Xevo TQ-S triple-quadrupole mass spectrometer involved three test mixtures. The method limits of detection (six-mix) for positive-ion GlowFlow source were between 0.03 and 10.00 pg with good linear response over two to four orders of magnitude and values of R²  > 0.98. The GlowFlow ionization source provided a signal intensity that was an order of magnitude greater than that of ESI for an atmospheric pressure gas chromatography standard mix and ionized several compounds that ESI could not.

CONCLUSIONS

The current GlowFlow design is relatively simple to retrofit to most API systems due to its small size. The sensitivity of the GlowFlow design is typically an order of magnitude less than that of ESI in positive-ion mode, but similar in sensitivity in negative-ion mode and comparable to that of APCI.

Quantitative Analysis of Exhaled Breath Collected on Filter Substrates via Low-Temperature Plasma Desorption/Ionization Mass Spectrometry

Breath analysis has attracted increasing attention in recent years due to its great potential for disease diagnostics at early stages and for clinical drug monitoring. There are several recent examples of successful development of real-time, in vivo quantitative analysis of exhaled breath metabolites via mass spectrometry. On the other hand, current mass spectrometer accessibility limitations restrict point-of-care applications. Here now, an offline method is developed for quantitative analysis of exhaled breath collected on inexpensive filter substrates for direct desorption and ionization by using low-temperature plasma-mass spectrometry (LTP-MS). In particular, different operating conditions of the ionization source were systematically studied to optimize desorption/ionization by using glycerol, a low volatility compound. Applications with respect to propofol, γ-valprolactone, and nicotine analysis in exhaled breath are demonstrated in this study. The effects of several filter substrate properties, including filter material and pore size, on the analyte signal were characterized. Cellulose filter papers performed best with the present analytes. In addition, filters with smaller pores enabled a more efficient sample collection. Furthermore, sample-collection flow rate was determined to have a very significant effect, with slower flow rates yielding the best results. It was also found that filters loaded with sample can be successfully stored in glass vials with no observable sample loss even after 3 days. Limits of detection under optimized conditions are shown to be competitive or significantly better compared with relevant techniques and with additional benefits of cost-efficiency and sample storage capabilities.

Three-Dimensional Mass Spectral Imaging of Polymers Via Laser-Assisted Micro-Pyrolysis Program with Flowing Atmospheric-Pressure Afterglow Ambient Mass Spectrometry

Herein, a novel diode laser-assisted micro-pyrolysis program (LAMP) technique is demonstrated and coupled with flowing atmospheric-pressure afterglow ambient mass spectrometry for instantaneously profiling polymers and polymer additives. Laser power modulation allows thermal separation of additives and different pyrolysis products, as shown through positive- and negative-mode high-resolution mass spectra and Kendrick mass defect plots of homopolymers, copolymers, polymer blends, and complex polymer samples. LAMP allows much faster temperature control through real-time duty cycle changes and gives significantly better spatial confinement compared to typical resistive heating pyrolysis approaches. Finally, MS imaging, with lateral and depth resolution, is demonstrated for a complex polymer pressure-sensitive adhesive tape sample.