Simple MoS2-Nanofiber Paper-Based Fluorescence Immunosensor for Point-of-Care Detection of Programmed Cell Death Protein 1

Highly fluorescent hybrid nanofibers as potential nanofibrous scaffolds for studying cell-fiber interactions

In this study, we report on the fabrication of hybrid nanofibers for labeling and bioimaging applications. Our approach is involved for developing highly fluorescent nanofibers using a blend of polylactic acid, polyethyleneglycol, and perylenediimide dyes, through the solution blow spinning technique. The nanofibers are exhibited diameters ranging from 330 nm to 420 nm. Nanofibers showed excellent red and near-infrared fluorescence emissive properties in fluorescent spectroscopy. Moreover, the strong two-photon absorption phenomenon was observed for nanofibers under confocal microscopy. To assess the applicability of these fluorescent nanofibers in bioimaging settings, we employ two types of mammalian cells B16F1 melanoma cells and J774.A1 macrophages. Both cell types exhibit negligible cytotoxicity after 24 h incubation with the nanofibers, indicating the suitability of nanofibers for cell-based experiments. We also observe strong interactions between the nanofibers and cells, as evidenced by two major events: a) the acquisition of an elongated cellular morphology with the major cellular axis parallel to the nanofibers and b) the accumulation of actin filaments along the points of contact of the cells with the fibers. Our findings demonstrate the suitability of these newly developed fluorescent nanofibers in cell-based applications for guiding cellular behavior. We expect that these fluorescent nanofibers have the potential to serve as scaffold materials for long-time tracking of cell-fiber interactions in fluorescence microscopy.

Dual-signal output biosensor for the detection of program death-ligand 1 and therapy progress monitoring of cancer

A disposable dual-output biosensor to detect program death-ligand 1 (PD-L1) was developed for immunotherapy progress monitoring and early cancer detection in a single experimental setup. The aptamer probe was assembled on rGO composited with carboxylated terthiophene polymer (rGO-pTBA) to specifically capture PD-L1 protein labeled with a new redox mediator, ortho-amino phenol para sulphonic acid, for amperometric detection. Each sensing layer was characterized through electrochemical and surface analysis experiments, then confirmed the sensing performance. The calibration plots for the standard PD-L1 protein detection revealed two dynamic ranges of 0.5-100.0 pM and 100.0-500.0 pM, where the detection limit was 0.20 ± 0.001 pM (RSD ≤5.2%) by amperometry. The sensor reliability was evaluated by detecting A549 lung cancer cell-secreted PD-L1 and clinically relevant serum levels of soluble PD-L1 (sPD-L1) using both detection methods. In addition, therapeutic trials were studied through the quantification of sPD-L1 levels for a small cohort of lung cancer patients. A significantly higher level of sPD-L1 was observed for patients (221.6-240.4 pM) compared to healthy individuals (16.2-19.6 pM). After immunotherapy, the patients' PD-L1 level decreased to the range of 126.7-141.2 pM. The results indicated that therapy monitoring was successfully done using both the proposed methods. Additionally, based on a comparative study on immune checkpoint-related proteins, PD-L1 is a more effective biomarker than granzyme B and interferon-gamma.

Highly Stable Fluorescent-Traffic-Light Sensor for Point-of-Care Detection of Tetracycline

Fluorescent point-of-care (POC) sensors have found great utility in fields like clinical diagnosis, food testing, and environmental monitoring. Herein, we developed a highly stable POC sensor that enabled the visual detection of tetracycline (TC) in a distinct fluorescent-traffic-light manner. In the sensor, a composite material of copper nanoclusters and metal-organic framework (CuNCs@MOF-5) prepared with a facile one-pot synthetic strategy was employed as the core element for target recognition and signal transduction. As evidenced by experiments, the as-prepared CuNCs@MOF-5 exhibited significantly improved fluorescence properties in terms of emission enhancement (about 28-fold) and stability improvement (over 110 days) compared to the CuNCs without confining and protection by MOF-5. More importantly, it was found that TC could uniquely interact with Zn(II) to trigger the disassembly of CuNCs@MOF-5, resulting in green fluorescence emission from the TC-Zn(II) complex and red fluorescence weakening of CuNCs. On the basis of this finding, a simple and stable sensor was proposed for POC detection of TC, which demonstrated high sensitivity, selectivity, and reproducibility. In addition to homogeneous visual detection in a 96-well plate, a CuNCs@MOF-5-contained agarose gel array was easily fabricated to achieve direct detection of TC in milk without any pretreatment, thanks to the size-sieving effect of the gel. Moreover, a test paper array was also put forward for low-cost TC detection, which indicates the extensibility and practicability of this sensing strategy.

Self-powered photoelectrochemical/visual sensing platform based on PEDOT/BiOBr0.8I0.2 organic-inorganic hybrid material and MWCNTs/SnS2 heterojunction for the ultrasensitive detection of programmed death ligand-1

Programmed death ligand-1 (PD-L1) can enhance the immune tolerance of tumor cells by suppressing the activity of T-cells, and is one of the culprits that lead to the immune escape of tumor cells. Thus, the sensitive and portable detection of PD-L1 levels is essential for many types of tumor prognosis. Herein, a novel dual-mode analytical device for the ultrasensitive detection of PD-L1 has been developed. In this configuration, an advanced organic-inorganic hybrid material of poly(3,4-ethylenedioxythiophene) -BiOBr0.8I0.2 is designed as photocathode to enhance the photogenerated electron migration efficiency of the MWCNTs/SnS2-photoanode by external circuit, amplifying cathodic photocurrent without extra energy supply. The PD-L1 aptamer is loaded on the photocathode surface to ensure selectivity. The obtained sensing platform can achieve highly sensitive and specific detection of PD-L1 in complex environment, with a low detection limit of 0.29 pg mL-1. On the other hand, electrochromic material Prussian blue (PB) and MWCNTs/SnS2 are integrated to fabricate a portable sensing chip for PD-L1. Under illumination, photogenerated electrons of MWCNTs/SnS2 are injected into Prussian blue, and the blue PB is reduced to white product, indicating the concentration of PD-L1, without need of other instrument. This self-powered photoelectrochemical and visual analysis system has good practicability and is a promising clinical diagnosis tool.

Molybdenum Disulfide as Tunable Electrochemical and Optical Biosensing Platforms for Cancer Biomarker Detection: A Review

Cancer is a common illness with a high mortality. Compared with traditional technologies, biomarker detection, with its low cost and simple operation, has a higher sensitivity and faster speed in the early screening and prognosis of cancer. Therefore, extensive research has focused on the development of biosensors and the construction of sensing interfaces. Molybdenum disulfide (MoS2) is a promising two-dimensional (2D) nanomaterial, whose unique adjustable bandgap shows excellent electronic and optical properties in the construction of biosensor interfaces. It not only has the advantages of a high catalytic activity and low manufacturing costs, but it can also further expand the application of hybrid structures through different functionalization, and it is widely used in various biosensors fields. Herein, we provide a detailed introduction to the structure and synthesis methods of MoS2, and explore the unique properties and advantages/disadvantages exhibited by different structures. Specifically, we focus on the excellent properties and application performance of MoS2 and its composite structures, and discuss the widespread application of MoS2 in cancer biomarkers detection from both electrochemical and optical dimensions. Additionally, with the cross development of emerging technologies, we have also expanded the application of other emerging sensors based on MoS2 for early cancer diagnosis. Finally, we summarized the challenges and prospects of MoS2 in the synthesis, functionalization of composite groups, and applications, and provided some insights into the potential applications of these emerging nanomaterials in a wider range of fields.

A Paper-Based Fluorescent Sensor for Rapid Early Screening of Oral Squamous Cell Carcinoma

Various types of sensors play an irreplaceable role in the detection of biomarkers, but their high cost and complicated operation make it difficult to benefit ordinary people. Herein, we develop a low-cost, double-layered, paper-based fluorescent sensor (CP/HQ) structurally consisting of the upper reaction layer loaded with two oxidases (lactate oxidase and choline oxidase) and the bottom fluorescent layer that physically associates with the porphine-grafted composite fluorescent polymer colloids (PF-PDMTP/HQ). Based on the dramatic and rapid fluorescence decrease of porphine induced by the oxidation between saliva and oxidases and subsequent fluorescence resonance energy transfer from oxidized hydroquinone, the resultant fluorescent paper sensor enables us to achieve visual detection of OSCC, which was further recognized by smartphone scanning as the grayscale variation. It was found that the linear sensing range of grayscale value are 10-200 μM for lactic acid and 10-100 μM for choline, with LODs of 5.7 and 8.9 μM, respectively. More importantly, the sensor can achieve a powerful detection capability comparable to that of high-performance liquid chromatography (HPLC) in clinical settings with simple operation, demonstrating its great application potential. Our proposed sensor not only improves the accuracy of OSCC diagnosis but also provides a valuable attempt for the device modification of polymer-sensing systems and the development of non-invasive and easy-to-operate disease screening methods.

Fluorescent "turn-on" aptamer sensor for sensitive and reliable detection of Golgi glycoprotein 73 based on nitrogen-doped graphene quantum dots and molybdenum disulfide nanosheets

The sensitivity and specificity of Golgi glycoprotein 73 (GP73) are very important for early diagnosis of hepatocellular carcinoma. Herein, we constructed a new-fashioned fluorescent aptamer sensor for GP73 determination based on nitrogen-doped graphene quantum dots (N-GQD_S) and molybdenum disulfide (MoS₂) nanosheets. N-GQDs with high fluorescence intensity and good stability were screened out, and GP73 aptamer (GP73_Apt) is labeled with N-GQDs to form the N-GQDs-GP73_Apt fluorescence probe. MoS₂ nanosheets can quench the fluorescence of N-GQDs-GP73_Apt owing to fluorescence resonance energy transfer mechanisms. After introducing GP73 into the biosensing system, the N-GQDs-GP73_Apt specifically bound with GP73 to form the deployable structures, making N-GQDs-GP73_Apt far away from MoS₂, blocking the fluorescence energy transfer process, and restoring the fluorescence of N-GQDs-GP73_Apt. When the GP73 concentration was in the extent of 2.5 ng/mL∼100 ng/mL, the relative fluorescence recovery is linearly relevant to the concentration of GP73, and the limit of detection (LOD) was 1.29 ng/mL (S/N = 3). Moreover in the application of actual serum sample detection, the recovery was range 98.85∼100.55 %. The fluorescent aptamer sensor can rapidly detect and analyze the serum marker GP73 with the characteristics of low-cost, high sensitivity, good specificity and recovery.

Microfluidic biosensor for one-step detection of multiplex foodborne bacteria ssDNA simultaneously by smartphone

As a major threat to food safety due to their pathogenicity, foodborne bacteria have received much attention. In this paper, we present a one-step and wash-free microfluidic biosensor platform by smartphone for simultaneous multiple foodborne bacteria target single-stranded DNA (ssDNA) detection. This technology is based on the fluorescence resonance energy transfer (FRET) between the graphene oxide (GO) and fluorescence molecules modified capture ssDNA of the target bacteria ssDNA (ctDNA) which were coated on the microfluidic chips. The fluorescence recovery was recorded by a smartphone fluorescent detector. With an optimal analytical performance, the platform realized the detection of four kinds of bacteria ssDNA simultaneously within 5 min, with the limits of detection (LODs) of 0.17, 0.18, 0.27, and 0.17 nM, respectively. And the throughput analysis of trace amounts of foodborne bacteria ssDNA in milk and water samples were successfully detected. This one-step and wash-free microfluidic biosensor can be used as a tool for food safety analysis.

Fluorescence immunosensor based on functional nanomaterials and its application in tumor biomarker detection

An immunosensor is defined as an analytical device that detects the binding of an antigen to its specific antibody by coupling an immunochemical reaction to the surface of a device called a transducer. Fluorescence immunosensing is one of the most promising immunoassays at present, and has the advantages of simple operation, fast response and high stability. A traditional fluorescence immunosensor often uses an enzyme-labelled antibody as a recognition unit and an organic dye as a fluorescence probe, so it is easily affected by environmental factors with low sensitivity. Nanomaterials have unique photostability, catalytic properties and biocompatibility, which open up a new path for the construction of stable and sensitive fluorescence immunosensors. This paper briefly introduces different kinds of immunosensors and the role of nanomaterials in the construction of immunosensors. The significance of fluorescent immunosensors constructed from functional nanomaterials to detect tumor biomarkers was analyzed, and the strategies to further improve the performance of fluorescent immunosensors and their future development trend were summarized.

Preparation of a pH-responsive controlled-release electrochemical immunosensor based on polydopamine encapsulation for ultrasensitive detection of alpha-fetoprotein

To accomplish ultra-sensitive detection of alpha-fetoprotein(AFP), a novel electrochemical immunosensor using polydopamine-coated Fe₃O₄ nanoparticles (PDA@Fe₃O₄ NPs) as a smart label and polyaniline (PANI) and Au NPs as substrate materials has been created. The sensor has the following advantages over typical immunoassay technology: (1) The pH reaction causes PDA@Fe₃O₄ NPs to release Prussian blue (PB) prosoma while also destroying the secondary antibody label and immunological platform and lowering electrode impedance; (2) PB has a highly efficient catalytic effect on H₂O₂, allowing for the obvious amplification of electrical impulses; (3) PANI was electrodeposited on the electrode surface to avoid PB loss and signal leakage, which effectively absorbed and fixed PB while considerably increasing electron transmission efficiency. The sensor's detection limit was 0.254 pg·mL^-1 (S/N = 3), with a detection range of 1 pg·mL^-1 to 100 ng·mL^-1. The sensor has a high level of selectivity, repeatability, and stability, and it is predicted to be utilized to detect AFP in real-world samples.

Understanding the bidirectional interactions between two-dimensional materials, microorganisms, and the immune system

Two-dimensional (2D) materials such as the graphene-based materials, transition metal dichalcogenides, transition metal carbides and nitrides (MXenes), black phosphorus, hexagonal boron nitride, and others have attracted considerable attention due to their unique physicochemical properties. This is true not least in the field of medicine. Understanding the interactions between 2D materials and the immune system is therefore of paramount importance. Furthermore, emerging evidence suggests that 2D materials may interact with microorganisms - pathogens as well as commensal bacteria that dwell in and on our body. We discuss the interplay between 2D materials, the immune system, and the microbial world in order to bring a systems perspective to bear on the biological interactions of 2D materials. The use of 2D materials as vectors for drug delivery and as immune adjuvants in tumor vaccines, and 2D materials to counteract inflammation and promote tissue regeneration, are explored. The bio-corona formation on and biodegradation of 2D materials, and the reciprocal interactions between 2D materials and microorganisms, are also highlighted. Finally, we consider the future challenges pertaining to the biomedical applications of various classes of 2D materials.

Molybdenum Disulfide-Based Nanoprobes: Preparation and Sensing Application

The use of nanoprobes in sensors is a popular way to amplify their analytical performance. Coupled with two-dimensional nanomaterials, nanoprobes have been widely used to construct fluorescence, electrochemical, electrochemiluminescence (ECL), colorimetric, surface enhanced Raman scattering (SERS) and surface plasmon resonance (SPR) sensors for target molecules' detection due to their extraordinary signal amplification effect. The MoS₂ nanosheet is an emerging layered nanomaterial with excellent chemical and physical properties, which has been considered as an ideal supporting substrate to design nanoprobes for the construction of sensors. Herein, the development and application of molybdenum disulfide (MoS₂)-based nanoprobes is reviewed. First, the preparation principle of MoS₂-based nanoprobes was introduced. Second, the sensing application of MoS₂-based nanoprobes was summarized. Finally, the prospect and challenge of MoS₂-based nanoprobes in future were discussed.

Graphene oxide/perylene-aniline electrochemiluminescence platform for protein detection based on molecule recognition

Most biosensors for folate receptor (FR) detection based on folic acid (FA) recognition usually contain FA-linked single-strand DNA (FA-ssDNA) and nuclease to promote sensitivity, which increases expenses and involves complicated assay processes. A few electrochemiluminescence (ECL) sensors that do not use FA-ssDNA and nuclease directly graft FA onto an ECL nanomaterial through covalent bonding for FR detection. In this study, we used FA-ssDNA to non-covalently graft FA onto π-conjugated ECL nanomaterial graphene oxide (GO)/perylene-aniline for fabricating ultrasensitive FR sensors without nuclease. 3,4,9,10-Perylenetetracarboxylic dianhydride (PTCDA) and aniline (An) self-assembled into π-conjugated nanorods, which were then loaded onto GO. This material was reported to produce 673 nm-dominated ECL with the co-reactant K₂S₂O₈, and was used as an ECL platform. FA-modified Poly-dA-ssDNA (FA-Poly-dA-ssDNA) molecules, consisting of 20 bases, were attached to the surface of GO/PTCDA-An to capture FR. A significant decrease of ECL intensity was observed due to the steric hindrance of FR. The proposed sensors exhibited high detection sensitivity with a linear range from 1 fg mL^-1 to 1 ng mL^-1 and a detection limit of 0.636 fg mL^-1. The sensors also showed good potential in real sample detection. Without introducing nuclease and complicated chemical reactions, this work provides a new sensing strategy for protein detection based on molecular recognition, which is extremely important in clinical diagnosis.