Fundamentals of Capillary Electrophoretic Migration and Separation of SDS Proteins in Borate Cross-Linked Dextran Gels

In Migratio Noncovalent Fluorophore Labeling of Proteins by Propidium Iodide in Sodium Dodecyl Sulfate Capillary Gel Electrophoresis

Sodium dodecyl sulfate capillary gel electrophoresis is one of the frequently used methods for size-based protein separation in molecular biology laboratories and the biopharmaceutical industry. To increase throughput, quite a few multicapillary electrophoresis systems have been recently developed, but most of them only support fluorescence detection, requiring fluorophore labeling of the sample proteins. To avoid the time-consuming derivatization reaction, we developed an on-column labeling approach utilizing propidium iodide for the first time in SDS-CGE of proteins, a dye only used before for nucleic acid analysis. As a key ingredient of the gel-buffer system, the oppositely migrating positively charged propidium ligand in migratio complexes with the SDS-proteins, therefore, supports in situ labeling during the electrophoretic separation process, not requiring any extra pre- or postcolumn derivatization step. A theoretical treatment is given to shed light on the basic principles of this novel online labeling process, also addressing the influence of propidium iodide on the electroosmotic flow, resulting in reduced retardation. The concept of propidium labeling in SDS-CGE was first demonstrated using a commercially available protein sizing ladder ranging from 6.5 to 200 kDa with different isoelectric points and post-translational modifications. Considering the increasing number of protein therapeutics on the market next, we focused on the labeling optimization of a therapeutic monoclonal antibody and its subunits, including the addition of the nonglycosylated heavy chain. Peak efficiency and resolution were compared between noncovalent and covalent labeling. The effect of ligand concentration on the effective and apparent electrophoretic mobility, the resulting peak area, and the resolution were all evaluated in view of the theoretical considerations. The best detection sensitivity for the intact monoclonal antibody was obtained by using 200 μg/mL propidium iodide in the separation medium (LOD 2 μg/mL, 1.35 × 10-8 M) with excellent detection linearity over 3 orders of magnitude. On the other hand, the resolution between the biopharmaceutical protein test mixture components containing the intact and subunit fragments of the therapeutic monoclonal antibody was very good in the ligand concentration range of 50-200 μg/mL, but using the local maximum at 100 μg/mL for the nonglycosylated/glycosylated heavy chain pair is recommended. The figures of merit, including precision, sensitivity, detection linear range, and resolution for a sample mixture in hand, can be optimized by varying the propidium iodide concentration in the gel-buffer system, as demonstrated in this paper.

Recent advances in microscale separation techniques for glycome analysis

The glycomic analysis holds significant appeal due to the diverse roles that glycans and glycoconjugates play, acting as modulators and mediators in cellular interactions, cell/organism structure, drugs, energy sources, glyconanomaterials, and more. The glycomic analysis relies on liquid-phase separation technologies for molecular purification, separation, and identification. As a miniaturized form of liquid-phase separation technology, microscale separation technologies offer various advantages such as environmental friendliness, high resolution, sensitivity, fast speed, and integration capabilities. For glycan analysis, microscale separation technologies are continuously evolving to address the increasing challenges in their unique manners. This review discusses the fundamentals and applications of microscale separation technologies for glycomic analysis. It covers liquid-phase separation technologies operating at scales generally less than 100 µm, including capillary electrophoresis, nanoflow liquid chromatography, and microchip electrophoresis. We will provide a brief overview of glycomic analysis and describe new strategies in microscale separation and their applications in glycan analysis from 2014 to 2023.

Detection and quantification of single chain rFVII impurity in final drug products by SE-UPLC and CE-SDS as an alternative to SDS-PAGE

Recombinant factor VII, produced in recombinant BHK cell line, is secreted as a single chain zymogen form (rFVII, non-activated) in cell culture supernatant and subsequently converts to its active form during anion exchange chromatography step in the downstream purification process, with the aid of calcium ion. Single chain rFVII impurity (non-activated form) in final drug products should not exceed more than 3.0 % of total rFVIIa content. Therefore, one of the most essential quality control tests in pharmaceutical companies is to precisely quantify and report this impurity. SDS-PAGE, as a traditional method in quality control laboratories to quantify single chain rFVII, is a laborious, time-consuming, low output, and semi-quantitative method for quantification of non-activated form impurity which utilizes a densitometer to scan the gel and calculate the non-activated form band density. In this work, we developed two novel instrumental-based techniques (SE-UPLC and CE-SDS) with superior precision, accuracy, sensitivity, and efficiency that overcome SDS-PAGE shortcomings. The results of both methods were comparable to SDS-PAGE and showed an even higher correlation with expected values. Finally, we concluded that these two methods could be used as a high throughput routine method in quality control laboratories as an alternative choice to manual SDS-PAGE.

Size separation of sodium dodecyl sulfate-proteins by capillary electrophoresis in dilute and ultra-dilute dextran solutions

SDS capillary gel electrophoresis is a widely used in the biopharma and the biomedical fields for rapid size separation of proteins. However, very limited information is available on the use of dilute and ultra-dilute sieving matrices for SDS-protein analysis. Here, background electrolytes (BGEs) containing 1%-0% dextran were used in borate-based BGE to separate a protein sizing ladder (PSL) ≤225 kDa and the intact and subunit forms of a therapeutic monoclonal antibody (mAb). The separation performance for the PSL and mAb components differed significantly with decreasing dextran concentration. Ferguson and reptation plots were used to elucidate the separation mechanism. Highly diluted dextran solutions resulted in linear Ferguson plots for both solute types (cf. Ogston theory) in spite of this model assumes a rigid pore structure, thus cannot describe the separation mechanism in ultra-dilute polymer solutions with no reticulations. The saddle differences between the resolution of the PSL and the intact/subunit mAb forms in ultra-dilute dextran-borate matrices suggested the importance of shape selectivity, manifested by the adequate separation of the SDS covered intact as well as light and heavy chain subunits of the therapeutic mAb even at zero dextran concentration.

Strategies for capillary electrophoresis: Method development and validation for pharmaceutical and biological applications-Updated and completely revised edition

This review is in support of the development of selective, precise, fast, and validated capillary electrophoresis (CE) methods. It follows up a similar article from 1998, Wätzig H, Degenhardt M, Kunkel A. "Strategies for capillary electrophoresis: method development and validation for pharmaceutical and biological applications," pointing out which fundamentals are still valid and at the same time showing the enormous achievements in the last 25 years. The structures of both reviews are widely similar, in order to facilitate their simultaneous use. Focusing on pharmaceutical and biological applications, the successful use of CE is now demonstrated by more than 600 carefully selected references. Many of those are recent reviews; therefore, a significant overview about the field is provided. There are extra sections about sample pretreatment related to CE and microchip CE, and a completely revised section about method development for protein analytes and biomolecules in general. The general strategies for method development are summed up with regard to selectivity, efficiency, precision, analysis time, limit of detection, sample pretreatment requirements, and validation.

Etlingera hemisphaerica Alters One-Dimensional Profile of Serum Proteins Due to Mercury Chloride in Rats (Rattus norvegicus)

<b>Background and Objective:</b> Several previous studies have shown that leaf ethanolic extract of <i>Etlingera hemisphaerica</i> (LE3H) has the potential to reduce the toxicity and teratogenicity effects of mercury. This study aimed to describe the effects of LE3H on the protein profile of <i>Rattus norvegicus</i> serum due to treatment with HgCl₂. <b>Materials and Methods:</b> Four groups of male rats, K1 was injected intraperitoneally (IP) HgCl₂ (5 mg kg¹ b.wt.), K2 was injected IP HgCl₂ (5 mg kg¹ b.wt.) and after 24 hrs it was gavage LE3H (0.27 mg g¹ b.wt.) every day for seven days, K3 was injected IP HgCl₂ (5 mg kg¹ b.wt.), after 24 hrs was gavage LE3H (0.55 mg g¹ b.wt.) every day for seven days. The K0 as control, received double-distilled water. On the ninth day, the experimental animals were killed via CD and blood was drawn from the heart to obtain serum. Serum samples were measured for protein content using the Lowry and serum was separated using the One-Dimensional Sodium dodecyl Sulfate-Polyacrylamide gel Electrophoresis (1D SDS-PAGE) technique. <b>Results:</b> The electropherograms showed four bands, 264.77, 219.53, 98.57 and 37.29 kDa, whose intensity significantly increased due to HgCl₂ treatment and then decreased to close to the control condition with LE3H administration. The results also revealed four bands, 31.95, 28, 06, 26, 29 and 15.09 kDa, whose intensity decreased significantly due to HgCl₂ treatment and then increased to close to the control condition by LE3H administration. <b>Conclusion:</b> The LE3H change profile of the eight blood serum protein bands due to HgCl₂ approximates the control condition in <i>R. norvegicus</i>.

Gels in Microscale Electrophoresis

Gel matrices are fundamental to electrophoresis analyses of biopolymers in microscale channels. Both capillary gel and microchannel gel electrophoresis systems have produced fundamental advances in the scientific community. These analytical techniques remain as foundational tools in bioanalytical chemistry and are indispensable in the field of biotherapeutics. This review summarizes the current state of gels in microscale channels and provides a brief description of electrophoretic transport in gels. In addition to the discussion of traditional polymers, several nontraditional gels are introduced. Advances in gel matrices highlighted include selective polymers modified to contain added functionality as well as thermally responsive gels formed through self-assembly. This review discusses cutting-edge applications to challenging areas of discovery in DNA, RNA, protein, and glycan analyses. Finally, emerging techniques that result in multifunctional assays for real-time biochemical processing in capillary and three-dimensional channels are identified.

Characterization of bispecific antigen-binding biotherapeutic fragmentation sites using microfluidic capillary electrophoresis coupled to mass spectrometry (mCZE-MS)

Fragmentation of therapeutic proteins is a potential critical quality attribute (CQA) that can occur in vivo or during manufacturing or storage due to enzymatic and non-enzymatic degradation pathways, such as hydrolysis, peroxide mediation, and acid/metal catalysis. Characterization of the fragmentation pattern of a therapeutic protein is traditionally accomplished using capillary gel electrophoresis with UV detection under both non-reducing and reducing conditions (nrCGE and rCGE). However, such methods are incompatible with direct coupling to mass spectrometry (MS) due to the use of anionic surfactants, e.g., sodium dodecyl sulfate (SDS). Here, we present a novel method to characterize size-based fragmentation variants of a new biotherapeutic kind using microfluidic ZipChip® capillary zone electrophoresis (mCZE) system interfaced with mass spectrometry (MS) to determine the molecular masses of fragments. A new modality of immuno-oncology therapy, bispecific antigen-binding biotherapeutic, was chosen to investigate its fragmentation pattern using mCZE-MS for the first time, according to our knowledge. Bispecific antigen-binding biotherapeutic samples from different stages of downstream column purification and forced degradation conditions were analyzed. The results were cross-validated with denaturing size-exclusion chromatography-mass spectrometry and conventional rSDS-CGE. In this study, we demonstrated that mCZE-MS could separate and characterize 12-40 kDa bispecific antigen-binding biotherapeutic fragments rapidly (within ≤12 minutes), with higher resolution and better sensitivity than traditional LC-MS methods.

Capillary gel electrophoresis of very high molecular weight glycoproteins. Commercial and tailor-made gels for analysis of human monomeric and secretory immunoglobulin A

Capillary gel electrophoresis (CGE) has been widely used for analysis of proteins according to their size. However, to our knowledge, this technique has not been optimized to immunoglobulin A (IgA) analysis, a protein of current and emerging high interest in several fields. IgA is the first barrier of human body against pathogens. This protein in human milk and colostrum is essential for immune protection of newborns and treatment of milk for storage in Human Milk Banks may alter IgA. The emerging use of IgA as therapeutic treatment also encourages the development of analysis methods for this class of immunoglobulins. IgA is far more heterogeneously glycosylated and complex than the well-studied IgG molecules. IgA in serum is mainly monomeric (mIgA) with about 160 kDa, while in secretions such as saliva, milk, colostrum, etc, secretory immunoglobulin A (sIgA) is the predominant form. This is a dimer where both monomers are linked by the J-chain and the secretory component accounting all together for a MW higher than 400 kDa including the glycans. This size is far from the 225 kDa MW for which commercial CGE kits are intended. The general rules governing CGE behavior of analytes cannot be directly applied to every protein. Addressing studies directed specifically to target proteins is specially needed for the large size and highly complex target analytes of this study. In this work the effect of several factors on CGE analysis of human serum and colostrum IgA is studied. The feasibility of performing analysis of both IgA classes using a commercial CGE kit is shown. In addition, this work introduces another novelty by preparing tailor-made reproducible gel buffers and to characterize them in terms of dynamic viscosity, conductivity, and electroosmotic flow mobility in bare fused silica capillaries. The possibility of analyzing mIgA and sIgA in less than 10 min using these tailor-made gels is demonstrated. Inter-day variation (RSD) for the main peak of sIgA is 0.25% for migration time (tm) and 0.27% for percentage corrected peak area (Acorr).

Using Digestion by IdeS Protease to Improve Quantification of Degradants in Monoclonal Antibodies by Non-Reducing Capillary Gel Electrophoresis

Monoclonal antibodies (mAbs) have become predominant therapeutics by providing highly specific mechanisms of action enabling treatment of complex diseases. However, mAbs themselves are highly complex and require thorough testing and characterization to ensure efficacy and patient safety. In this regard, fragmentation is a degradation product of concern. The biotechnology industry uses capillary gel electrophoresis (CGE) to quantify fragmentation by electrophoretically resolving size variants, such as products resulting from partial reduction of interchain disulfides. However, standard CGE methods may not adequately separate less typical fragments, particularly when there is minimal size difference to the parent molecule. For mAb-1, a degradant only ∼11 kDa smaller than the intact mAb (∼149 kDa) was unable to be resolved under typical non-reducing conditions, preventing an accurate purity assessment and precluding tracking of product purity within stability studies. To address these deficiencies, a subunit-based non-reducing CGE method was developed to employ IdeS protease to produce F(ab')2 and Fc fragments, which resulted in baseline resolution of the clipped subunit species from its parent species. This enabled more accurate trending of purity throughout stability studies. Method characterization ensured that this subunit method monitored expected impurities observed by intact non-reducing CGE and thus could suitably replace non-reducing CGE in the release and stability testing panel. It also has the potential to replace reducing CGE based on its tracking of the deglycosylated Fc species. We believe this approach of utilizing proteases to develop subunit CGE methods for release and stability can be applied to other molecules when in need of resolving analogous fragments.

The Effect of Molecular Mass of Hydroxyethyl Cellulose on the Performance of Capillary Electrophoretic Separation of Proteins

Capillary electrophoresis (CE) is a versatile analytical separation method in the field of biochemistry. Although it has been proved that the relative molecular mass (Mr) of the polymers determines the threshold concentration of the entangled polymer solution, which will affect the separation performance of DNA molecules, there is still no report on the effect of Mr on the separation performance of proteins. Herein, we have thoroughly performed the CE of proteins ranged from 14.3 kDa to 116 kDa in a mixed hydroxyethyl cellulose (HEC) solution. The mixed solution was obtained with various Mr including 90,000, 250,000, 720,000, and 1,300,000. Then, we found that the mixed polymer provided a high resolution for small protein molecules while increasing the efficiency of large ones. Results demonstrated that the migration time decreased if HEC (1,300,000) was mixed with the lower Mr one, and the mixed solution (1,300,000/250,000) offered the highest resolution. The resolution was negatively correlated with the electric field strength. Finally, we have employed the optimal electrophoretic conditions to separate proteins in human tears, and it showed that lysozyme, lipocalin, and lactoferrin from human tears were successfully resolved in the mixed HEC. Such work indicates that CE has the potential to be developed as a tool for the diagnosis of xerophthalmia, meibomian gland dysfunction, or other eye diseases.

Elimination of light chain tailing in reducing capillary electrophoresis with sodium dodecyl sulfate analysis of a monoclonal antibody

Capillary electrophoresis with sodium dodecyl sulfate (CE-SDS) is a common analytical technique for investigating the purity and molecular size heterogeneity of monoclonal antibody (mAb) drugs. In reducing CE-SDS analysis of mAb-A, the light chain (LC) peak exhibited severe tailing, seriously affecting the purity analysis. The purposes of this investigation are to clarify the source of tailing and develop a more appropriate CE-SDS method to eliminate LC tailing. The degree of LC tailing was closely related to the mAb concentration, SDS concentration, and injection amount, and more hydrophobic detergents, such as sodium hexadecyl sulfate (SHS) and sodium tetradecyl sulfate (STS), could be used instead of SDS to obtain better peak shapes. The results also indicated that the tailing was caused by the binding problem associated with SDS, and SHS/STS could provide a more stable and uniform complexation for the LC. In summary, the method we developed successfully eliminated the LC tailing and provided a robust characterization of mAb-A in reducing CE-SDS analysis.

Electromigration Dispersion in Sodium Dodecyl Sulfate Capillary Gel Electrophoresis of Proteins

The electromigration dispersion of the light- and heavy-chain subunit peaks of the therapeutic monoclonal antibody omalizumab was investigated in sodium dodecyl sulfate capillary gel electrophoresis (SDS-CGE) using borate cross-linked dextran sieving matrices. Increasing boric acid content (340-640 mM) caused electromigration dispersion shifts for both low (2%)- and high (10%)-dextran-concentration gels in all gel-buffer compositions. In case of the heavy-chain fragment, elevated borate concentrations resulted in decreasing tailing and increasing fronting with the use of higher- and lower-dextran-concentration gels, respectively. The light-chain fragment, on the other hand, exhibited increased fronting with increasing borate concentration for both dextran concentrations examined in this study. Increase of the glycerol ingredient level in the gel-buffer system caused the same effect as the increasing borate concentration in both dextran concentrations. The detected electromigration dispersion was considered as the result of the formation of monomeric and dimeric glycerol-borate complexes as co-ionic constituents, migrating slower than that of the unconjugated tetrahydroxyborate. In addition, complexation of the tetrahydroxyborate anion with the glucose building blocks of the dextran polymer decreased its mobility to practically zero, contributing to further decrease in the resultant effective mobility of the co-ionic species. We suggest that the observed fronting and/or tailing peak shapes of the monoclonal antibody fragments in SDS-CGE at increasing boric acid concentrations can be considered as the result of multiple effects including changes in pH, sieving matrix pore size, viscosity, and the mobility variation of the co-ionic borate adducts with the gel-buffer ingredients. While electromigration dispersion-mediated band broadening, in general, can be minimized via matching the effective mobility of the co-ionic species to the analyte molecules of interest, in case of borate cross-linked dextran gels, optimization of the boric acid concentration required special consideration of its gel cross-linking function. For the light- and heavy-chain fragments of the IgG analyte, best peak shapes were attained with the use of 10% dextran/340 mM boric acid and 10% dextran/640 mM boric acid-containing gel-buffer systems, respectively. Based on this observation, here we introduce the concept of borate-gradient-mediated transient mobility matching in SDS-CGE of proteins. This novel approach resulted in close to optimal peak shapes for the distantly migrating IgG subunits within a single run, as well as unraveled the long-sought possible solution to perform capillary pore-size-gradient gel electrophoresis.

Annual review of capillary electrophoresis technology in 2021

该文为2021年毛细管电泳(capillary electrophoresis, CE)技术年度回顾。归纳总结了以“capillary electrophoresis-mass spectrometry”或“capillary isoelectric focusing”或“micellar electrokinetic chromatography”或“capillary electrophoresis”为关键词在ISI Web of Science数据库中进行主题检索(排除“capillary electrochromatography”“microchip”和“capillary monolithic column”)得到的2021年CE技术相关研究论文291篇,以及中文期刊《色谱》和《分析化学》中相关研究论文9篇。重点介绍了影响因子(IF)≥10.0的Coordination Chemistry Reviews, Angewandte Chemie-International Edition, Nature Protocols, TrAC-Trends in Analytical Chemistry, Signal Transduction and Targeted Therapy发表的7篇论文;以及影响因子5~10之间的代表性期刊Analytical Chemistry, Analytica Chimica Acta, Talanta和Food Chemistry的42篇论文;对影响因子小于5但CE技术报道较为集中的Journal of Chromatography A和Electrophoresis,国内重要的中文期刊《色谱》和《分析化学》中的代表性工作进行了概述。该文根据国际通用学术水平评价指标之一的影响因子选择期刊,结合期刊发表CE论文代表性工作进行介绍,便于读者快速了解毛细管电泳技术在过去一年的重要研究进展。

Introduction of a Capillary Gel Electrophoresis-Based Workflow for Biotherapeutics Characterization: Size, Charge, and N-Glycosylation Variant Analysis of Bamlanivimab, an Anti-SARS-CoV-2 Product

Coronavirus Disease 2019 (COVID-19) is a major public health problem worldwide with 5–10% hospitalization and 2–3% global mortality rates at the time of this publication. The disease is caused by a betacoronavirus called Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The receptor-binding domain (RBD) of the Spike protein expressed on the surface of the virus plays a key role in the viral entry into the host cell via the angiotensin-converting enzyme 2 receptor. Neutralizing monoclonal antibodies having the RBD as a target have the ability to inhibit angiotensin-converting enzyme 2 (ACE2) receptor binding, therefore, prevent SARS-CoV-2 infection, represent a promising pharmacological strategy. Bamlanivimab is the first anti-spike neutralizing monoclonal antibody, which got an emergency use authorization from the FDA for COVID-19 treatment. Albeit, bamlanivimab is primarily a neutralizing mAb, some of its effector function related activity was also emphasized. The effector function of antibody therapeutics is greatly affected by their N-linked carbohydrates at the conserved Fc region, possibly influenced by the manufacturing process. Various capillary gel electrophoresis methods are widely accepted in the biopharmaceutical industry for the characterization of therapeutic antibodies. In this paper we introduce a capillary gel electrophoresis based workflow for 1) size heterogeneity analysis to determine the presence/absence of the non-glycosylated heavy chain (NGHC) fragment (SDS-CGE); 2) capillary gel isoelectric focusing for possible N-glycosylation mediated charge heterogeneity determination, e.g., for excess sialylation and finally, 3) capillary gel electrophoresis for N-glycosylation profiling and sequencing. Our results have shown the presence of negligible amount of non-glycosylated heavy chain (NGHC) while 25% acidic charge variants were detected. Comprehensive N-glycosylation characterization revealed the occurrence of approximately 8.2% core-afucosylated complex and 17% galactosylated N-linked oligosaccharides, suggesting the possible existence of antibody dependent cell mediated cytotoxicity (ADCC) effector function in addition to the generally considered neutralizing effect of this particular therapeutic antibody molecule.

The 2022 Winners of the Lifetime Achievement and Emerging Leader in Chromatography Awards

Barry L. Karger and James P. Grinias are the winners of the 15th annual LCGC Lifetime Achievement and Emerging Leader in Chromatography Awards, respectively. Here, we review their achievements.

Capillary Sodium Dodecyl Sulfate Agarose Gel Electrophoresis of Proteins

Capillary sodium dodecyl sulfate gel electrophoresis has long been used for the analysis of proteins, mostly either with entangled polymer networks or translationally cross-linked gels. In this paper capillary agarose gel electrophoresis is introduced for the separation of low molecular weight immunoglobulin subunits. The light (LC~24 kDa) and heavy (HC~50 kDa) chain fragments of a monoclonal antibody therapeutic drug were used to optimize the sieving matrix composition of the agarose/Tris-borate-EDTA (TBE) systems. The agarose and boric acid contents were systematically varied between 0.2–1.0% and 320–640 mM, respectively. The influence of several physical parameters such as viscosity and electroosmotic flow were also investigated, the latter to shed light on its effect on the electrokinetic injection bias. Three dimensional Ferguson plots were utilized to better understand the sieving performance of the various agarose/TBE ratio gels, especially relying on their slope (retardation coefficient, K_R) value differences. The best resolution between the LC and non-glycosylated HC IgG subunits was obtained by utilizing the molecular sieving effect of the 1% agarose/320 mM boric acid composition (ΔK_R = 0.035). On the other hand, the 0.8% agarose/640 mM boric acid gel showed the highest separation power between the similar molecular weight, but different surface charge density non-glycosylated HC and HC fragments (ΔK_R = 0.005). It is important to note that the agarose-based gel-buffer systems did not require any capillary regeneration steps between runs other than simple replenishment of the sieving matrix, significantly speeding up analysis cycle time.