Light Scattering and Luminophore Enrichment-Enhanced Electrochemiluminescence by a 2D Porous Ru@SiO2 Nanoparticle Membrane and Its Application in Ultrasensitive Detection of Prostate-Specific Antigen

Preparation and application of multiple particle binding-liposomes for electrochemiluminescent signal amplification in bioassays

In this study, multiple particle binding-liposomes (MPB-Lips), encapsulating the luminophore tris(2',2-bipyridyl)ruthenium (II) complex ([Ru(bpy)3]2+), were developed as an electrochemiluminescence (ECL) signal amplifier and were applied to detect the model analyte streptavidin (SA) using the indirect competitive ECL method. The MPB-Lips were prepared by mixing various ratios of two different liposomes-one containing a phospholipid with a primary amine group and a biotinyl group (BIO/NH2-Lip) and one containing a phospholipid with an N-hydroxysuccinimide group (NHS-Lip) to allow binding between particles via amide bonds. Quartz crystal microbalance analysis using SA-modified gold-coated quartz crystals showed that the frequency shift values of MPB-Lips gradually decreased in the order BIO/NH2-Lip:NHS-Lip = 1:0 < 1:1 < 1:3 < 1:5. This indicated that MPB-Lips were successfully formed. The indirect competitive ECL method using SA-modified gold electrodes showed that the 1:5-Lip system had greater sensitivity than the 1:0-Lip system-the limit of detection and quantification values for the systems were 1.84 and 6.30 μg mL-1 for 1:0-Lip, and 1.20 and 1.74 μg mL-1 for 1:5-Lip. Finally, the recovery of SA spiked in fetal bovine serum samples using the 1:5-Lip system showed good accuracy and precision with a recovery rate of 83-106% and relative standard deviation of 4-14%. Our study demonstrated that the MPB-Lips system was an effective and useful ECL amplifier and the ECL method using MPB-Lips could be applied to detect an analyte in a real sample.

High-Sensitivity Homogeneous Detection of miRNA-155 Governed by DNA Walker-Regulated Surface DNA Density of Magnetic Electrochemiluminescence Nanoparticles

Homogeneous electrochemiluminescence (ECL) has gained attention for its simplicity and stability. However, false positives due to solution background interference pose a challenge. To address this, magnetic ECL nanoparticles (Fe3O4@Ru@SiO2 NPs) were synthesized, offering easy modification, magnetic separation, and stable luminescence. These were utilized in an ECL sensor for miRNA-155 (miR-155) detection, with locked DNAzyme and substrate chain (mDNA) modified on their surface. The poor conductivity of long-chain DNA significantly impacts the conductivity and electron transfer capability of Fe3O4@Ru@SiO2 NPs, resulting in weaker ECL signals. Upon target presence, unlocked DNAzyme catalyzes mDNA cleavage, leading to shortened DNA chains and reduced density. In contrast, the presence of short-chain DNA has minimal impact on the conductivity and electron transfer capability of Fe3O4@Ru@SiO2 NPs. Simultaneously, the material surface's electronegativity decreases, weakening the electrostatic repulsion with the negatively charged electrode, resulting in the system detecting stronger ECL signals. This sensor enables homogeneous ECL detection while mitigating solution background interference through magnetic separation. Within a range of 100 fM to 10 nM, the sensor exhibits a linear relationship between ECL intensity and target concentration, with a 26.91 fM detection limit. It demonstrates high accuracy in clinical sample detection, holding significant potential for clinical diagnostics. Future integration with innovative detection strategies may further enhance sensitivity and specificity in biosensing applications.

Surface plasmon resonance-enhanced photoelectrochemical immunoassay with Cu-doped porous Bi2WO6 nanosheets

The development of rapid screening sensing platforms to improve pre-screening mechanisms in community healthcare is necessary to meet the significant need for portable testing in biomarker diagnostics. Here, we designed a portable smartphone-based photoelectrochemical (PEC) immunoassay for carcinoembryonic antigen (CEA) detection using Cu-doped ultrathin porous Bi2WO6 (CuBWO) nanosheets as the photoactive material. The CuBWO nanosheets exhibit a fast photocurrent response and excellent electrical transmission rate under UV light due to their surface plasmon resonance effect (SPR). The method uses glucose oxidase-labeled secondary antibody as a signal indicator for sandwich-type immune conjugation. In the presence of the target CEA, the electrons and holes generated at the surface of the photo-excited ultrathin porous CuBWO were rapidly consumed by the production of H2O2 from glucose oxidase oxidizing glucose, resulting in a weakened photocurrent signal. The photocurrent intensity increased logarithmically and linearly with increasing CEA concentration (0.02-50 ng mL-1), with a detection limit of 15.0 pg mL-1 (S/N = 3). The system provides a broader idea for inferring the electron-hole transport mechanism in ultrathin porous nanosheet layer materials and developing efficient PEC sensors.

Dual-mode photoelectrochemical radar based on CdS quantum dot and Ce-MOF for detection of low-abundance disease-associated proteins

Herein, we developed a convenient and versatile dual-mode electrochemiluminescence (ECL) and photoelectrochemistry (PEC) sensing radar for the detection of Prostate-specific antigen (PSA), which has important implications for detection of low-abundance disease-associated proteins. Cerium-based metal-organic framework (Ce-MOFs) were firstly modified on the electrode, showing well ECL and PEC property. In particular, a unique multifunctional Au@CdS quantum dots (QDs) probe loaded numerous QDs and antibody was fabricated, not only displaying strong ECL and PEC signals, but also having specific recognition to PSA. After the signal probe was linked to the electrode by immune reaction, much amplified signals of ECL and PEC were generated for double-mode detection of PSA. Therefore, this work proposed a multifunctional Au@CdS QDs signal probe with excellent ECL and PEC performance, and developed an ultrasensitive photoelectric biosensing platform for dual-mode detection, which provides an effective method for health monitoring of cancer patients.

Carbon quantum dots(CQDs)-sensitized CdS/CuInS2 heterojunction as a photoelectrochemical biosensing platform for highly sensitive detection of prostate-specific antigen

Sensitive and quantitative detection of prostate-specific antigen (PSA) has been determined to be indispensable for clinical diagnostics of prostate cancer, whereas such detection is quite challenging due to the extremely low concentration of biomarkers in human serum samples. In this study, a photoelectrochemical (PEC) sensor was effectively developed for the high-sensitivity analysis of prostate-specific antigen (PSA) using a signal amplification method utilizing sensitized carbon quantum dots (CQDs). In this experiment, cadmium sulfide quantum dots were employed as the substrate materials, and indium copper sulfide quantum dots were loaded on their surfaces. Moreover, the efficient matching of energy levels in these two materials contributed to the generation of photocurrents. The aforementioned heterojunction semiconductor QDs were thus combined with CQDs to produce CQDs on their surfaces. As a result of the presence of CQDs, the ability of heterojunction materials to absorb light was remarkably enhanced, increasing the photocurrent by over ten times. Consequently, in this study, CQDs were combined with PEC sensors, and the developed PEC biosensors exhibited excellent optical performance, sensitivity, repeatability, and stability. The results obtained from the analysis of actual samples were satisfactory and have promising application prospects.

Controlled-Release Electrochemiluminescence Biosensor with Strong Self-On Effect by a Multiple Signal Amplification Strategy for Trace Detection of Prostate-Specific Antigen

The enhancement of sensitivity in biological analysis detection can reduce the probability of false positives of the biosensor. In this work, a novel self-on controlled-release electrochemiluminescence (CRE) biosensor was designed by multiple signal amplification and framework-enhanced stability strategies. As a result, the changes of the ECL signal were enhanced before and after the controlled-release process, achieving sensitive detection of prostate-specific antigen (PSA). Specifically, for one thing, Fe3O4@CeO2-NH2 with two paths for enhancing the generation of coreactant radicals was used as the coreaction accelerator to boost ECL performance. For another, due to the framework stability, zeolitic imidazolate framework-8-NH2 (ZIF-8-NH2) was combined with luminol to make the ECL signal more stable. Based on these strategies, the constructed CRE biosensor showed a strong self-on effect in the presence of PSA and high sensitivity in a series of tests. The detection range and limit of detection (LOD) were 5 fg/mL to 10 ng/mL and 2.8 fg/mL (S/N = 3), respectively, providing a feasible approach for clinical detection of PSA.

Functionalized nanomaterials-based electrochemiluminescent biosensors and their application in cancer biomarkers detection

To detect a range of trace biomarkers associated with human diseases, researchers have been focusing on developing biosensors that possess high sensitivity and specificity. Electrochemiluminescence (ECL) biosensors have emerged as a prominent research tool in recent years, owing to their potential superiority in low background signal, high sensitivity, straightforward instrumentation, and ease of operation. Functional nanomaterials (FNMs) exhibit distinct advantages in optimizing electrical conductivity, increasing reaction rate, and expanding specific surface area due to their small size effect, quantum size effect, and surface and interface effects, which can significantly improve the stability, reproducibility, and sensitivity of the biosensors. Thereby, various nanomaterials (NMs) with excellent properties have been developed to construct efficient ECL biosensors. This review provides a detailed summary and discussion of FNMs-based ECL biosensors and their applications in cancer biomarkers detection.

Highly specific and sensitive sandwich-type electrochemiluminescence biosensor for HPV16 DNA detection based on the base-stacking effect and bovine serum albumin carrier platform

The detection of specific DNA sequences and the identification of single nucleotide polymorphisms are important for disease diagnosis. Herein, by combining the high specificity of the base-stacking effect with the high reproducibility of bovine serum albumin (BSA) modified electrodes and the high loading performance of DNA nanoclews (DNA NCs), a novel sandwich-type electrochemiluminescence (ECL) biosensor is reported for the highly specific detection of HPV16 (chosen as the model target). The capture probes are loaded by BSA carrier platforms modified on the gold electrode surface to improve reproducibility. DNA NCs loaded with a large amount of Ru(phen)32+ worked as signal probes. The template probe is composed of the complementary strand of the target and two free nucleic acid anchors at the head and tail. In the presence of the target DNA, the template probes can form stacked base pairs with target, generating high base-stacking energy. This results in the shorter free anchors of template probes being able to bind to the capture and signal probes. This eventually forms a sandwich structure that allows Ru(phen)32+ to be near the electrode surface, producing an ECL signal. There is a linear relationship between the signal and the target concentration range from 10 fM to 100 pM, with a detection limit of 5.03 fM (S/N=3). Moreover, the base-stacking effect has single base recognition ability for base pairs, effectively avoiding false positive signals. The results of this strategy for clinical samples are consistent with classical methods.

Biosensors for prostate cancer detection

Prostate cancer (PC) is one of the most common tumors and a leading cause of mortality among men, resulting in ~375 000 deaths annually worldwide. Various analytical methods have been designed for quantitative and rapid detection of PC biomarkers. Electrochemical (EC), optical, and magnetic biosensors have been developed to detect tumor biomarkers in clinical and point-of-care (POC) settings. Although POC biosensors have shown potential for detection of PC biomarkers, some limitations, such as the sample preparation, should be considered. To tackle such shortcomings, new technologies have been utilized for development of more practical biosensors. Here, biosensing platforms for the detection of PC biomarkers such as immunosensors, aptasensors, genosensors, paper-based devices, microfluidic systems, and multiplex high-throughput platforms, are discussed.

Ag NC and Ag NP/PorC Film-Based Surface-Enhanced Raman Spectroscopy-Type Immunoassay for Ultrasensitive Prostate-Specific Antigen Detection

Surface-enhanced Raman scattering (SERS) is a spectral detection technology with high sensitivity and detectivity and can be used to detect the fingerprint information of the molecules with ultralow concentration. Herein, a kind of immunostructure constructed by Ag nanoparticle/porous carbon (Ag NP/PorC) films as the immunosubstrate and Ag NCs as the immunoprobes was presented for ultralow level prostate-specific antigen (PSA) detection. Experimentally, the Ag NP/PorC film was first prepared with a facile method by carbonizing the gelatin-AgNO₃ film in air, and Ag NCs were synthesized by the hydrothermal method. Then, the Ag NP/PorC film was modified by PSA antibodies as the substrate, while Ag NCs were decorated by R6G and PSA antibodies for probes. The sandwiched SERS detection embodiment was constructed by the immunoreaction between the PSA and PSA antibody predecorated on the substrate and probes. Our results show that the proposed SERS-type immunoassay is highly sensitive and selective to a wide range of PSA concentrations from 10^-5 to 10^-12 g/mL. Thereafter, it was also implemented to detect the PSA level in human serum, and the results successfully reproduce the PSA levels as those measured by the chemiluminescence method with a recovery rate above 90%. All in all, this SERS-type immunoassay provides a promising method for the early diagnosis of prostate cancer.

Ru(II)-modified metal organic framework as excellent electrochemiluminescence emitter for ultrasensitive nicotine detection

The sensitive and selective nicotine detection in cigarette is necessary due to the cigarette addiction problem and the neurotoxicity of nicotine on human body. In this study, a novel electrochemiluminescence (ECL) emitter with excellent performance was prepared for nicotine analysis, by combining Zr-based metal organic framework (Zr-MOF) and branched polyethylenimine (BPEI)-coated Ru(dcbpy)₃²⁺ through electrostatic interaction. Ru(dcbpy)₃²⁺ integrated by Zr-MOF could be catalyzed by the reaction intermediates SO₄^•-, produced from the co-reactant S₂O₈^2-, resulting in a significant increase in ECL response. Interestingly, SO₄^•- with strong oxidizing ability could preferentially oxidize nicotine, leading to ECL quenching. The constructed ECL sensor based on the Ru-BPEI@Zr-MOF/S₂O₈^2- system displayed ultrasensitive determination of nicotine with a lower detection limit of 1.9 × 10^-12 M (S/N = 3), which is three orders lower than previously reported ECL results and 4-5 orders lower than that of other types of method. This method puts forward a new approach for building efficient ECL system with greatly improved ECL sensitivity for nicotine detection.

Versatile FeMoOv nanozyme bipolar electrode electrochemiluminescence biosensing and imaging platform for detection of H2O2 and PSA

In this work, a unique FeMoOv nanozyme-bipolar electrode (NM-BPE) electrochemiluminescence (ECL) biosensing and imaging platform was proposed for the first time to realize sensitive detection of target hydrogen peroxide (H₂O₂) and prostate specific antigen (PSA). Considering the advantage that the cathode and anode poles of the bipolar electrode (BPE) can be modified respectively, this work was carried out using anode equipped with ECL reagent bipyridine ruthenium (Ru(bpy)₃²⁺), and cathode equipped with the Fe-doped molybdenum oxide/Au nanoparticles (FeMoOv/AuNPs) with excellent peroxidase (POD) and catalase (CAT)-like activity. Because FeMoOv/AuNPs show efficient enzyme catalysis effect and can greatly promote the decomposition of H₂O₂, thus the electron transfer rate in the NM-BPE system would be much accelerated to enhance the ECL signal of Ru(bpy)₃²⁺. Based on this principle, this work not only realized sensitive detection of H₂O₂, but also ingeniously designed an sandwich immunosensor using FeMoOv/AuNPs as recognition probe to mediate the ECL response on the anode, achieving highly sensitive detection of PSA. Furthermore, a unique mobile phone ECL imaging system was developed for assay of PSA at different concentrations, which opened a new portable imaging sensing device for bioassays. This work was the first time to combine nanozymes with bipolar electrodes for ECL analysis and imaging, which not only broadened the applications of nanozymes, but also pioneered the new joint ECL research technique of bipolar electrode and ECL imaging in bioassays, showing great application prospect for multiple detection of proteins, nucleic acids and cancer cells.

Dual-Mechanism Quenching of Electrochemiluminescence Immunosensor Based on a Novel ECL Emitter Polyoxomolybdate-Zirconia for 17β-Estradiol Detection

The exploration of novel electrochemiluminescence (ECL) reagents has been a breakthrough work in ECL immunoassay. In this work, the ECL properties of polyoxomolybdate-zirconia (POM-ZrO₂) were discovered for the first time and their luminescence mechanism was initially explored. Virgulate POM-ZrO₂ was synthesized from phosphomolybdic acid hydrate and zirconium oxychloride by solvothermal method, which achieved intense and stabilized cathode ECL emission at a negative potential. Polyaniline@Au nanocrystals (PANI@AuNPs) as the executor of the dual-mechanism quenching strategy were used to reduce the output signal. The quenching efficiency was significantly enhanced by the dual mechanisms of ECL energy transfer and electron transfer. Specifically, PANI@AuNPs can serve as an energy receptor to absorb the energy emitted by POM-ZrO₂ (energy donor), while the appropriate energy level can be regarded as the condition for electron transfer to quench the ECL intensity of POM-ZrO₂. Herein, the proposed dual-mechanism quenching strategy was applied to the immunoassay of 17β-estradiol by constructing a competitive immunosensor. As expected, the immunosensor demonstrated favorable analytical performance and a wide sensing range from 0.01 pg/mL to 200 ng/mL. Hence, it provides a novel method for the sensitive analysis of other biomolecules, such as disease markers and environmental estrogens.

Progress and Prospects of Electrochemiluminescence Biosensors Based on Porous Nanomaterials

Porous nanomaterials have attracted much attention in the field of electrochemiluminescence (ECL) analysis research because of their large specific surface area, high porosity, possession of multiple functional groups, and ease of modification. Porous nanomaterials can not only serve as good carriers for loading ECL luminophores to prepare nanomaterials with excellent luminescence properties, but they also have a good electrical conductivity to facilitate charge transfer and substance exchange between electrode surfaces and solutions. In particular, some porous nanomaterials with special functional groups or centered on metals even possess excellent catalytic properties that can enhance the ECL response of the system. ECL composites prepared based on porous nanomaterials have a wide range of applications in the field of ECL biosensors due to their extraordinary ECL response. In this paper, we reviewed recent research advances in various porous nanomaterials commonly used to fabricate ECL biosensors, such as ordered mesoporous silica (OMS), metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and metal-polydopamine frameworks (MPFs). Their applications in the detection of heavy metal ions, small molecules, proteins and nucleic acids are also summarized. The challenges and prospects of constructing ECL biosensors based on porous nanomaterials are further discussed. We hope that this review will provide the reader with a comprehensive understanding of the development of porous nanomaterial-based ECL systems in analytical biosensors and materials science.

Band-Edge Effect-Induced Electrochemiluminescence Signal Amplification Based on Inverse Opal Photonic Crystals for Ultrasensitive Detection of Carcinoembryonic Antigen

Photonic crystals (PCs) have emerged as a promising electrochemiluminescence (ECL) matrix in the domain of immunoassay. Making maximum use of light manipulation properties of PCs is highly desired for improving the sensitivity. In this work, we proposed a band-edge effect-induced ECL enhancement strategy based on silica inverse opal PCs (SIOPCs). By fine-tuning the lattice constant and carefully calibrating the stopband position, we found that the band edge of the stopband exerted significant influences on the ECL intensity and spectral distribution. The high density of states at the blue edge of the photonic band gap increased the radiative transition probability of ECL emitters and enhanced the photon extraction during propagation, giving rise to ∼20-fold ECL signal amplification accompanied by a redistributed ECL spectrum for the Ru(bpy)₃²⁺-TPrA system. In combination with the intrinsic structural superiority, like large specific surface area and interconnected macropores, the developed SIOPC electrode was successfully applied in constructing a sandwich-type immunosensor. The fabricated immunosensor displayed a very low detection limit of 0.032 pg/mL and a wide linear range of 0.1 pg/mL-150 ng/mL for a carcinoembryonic antigen assay, showing its potential application in disease diagnosis.

Sensitive Electrochemiluminescence Biosensor Based on the Target Trigger Difference of the Electrostatic Interaction between an ECL Reporter and the Electrode Surface

The discrepancy of the electrostatic interaction of negatively charged signal molecules to long and short DNA strands of the modified electrode surface has been used for the first time to the develop an electrochemiluminescence (ECL) biosensor for human papillomavirus 16 (HPV 16) DNA detection. The short single-stranded capture probe (CP) was modified first on the surface of the gold electrode, which only has a small amount of negative charge. The electrostatic interaction between the negatively charged tris(2,2'-bipyridyl) ruthenium(II) chloride hexahydrate-doped SiO₂ nanoparticles (Ru@SiO₂ NPs) and CP is weak, hence Ru@SiO₂ NPs easily diffuse to the surface of the electrode to generate a strong ECL signal. Hybrid chain reaction (HCR) amplification products (long strand dsDNA) were prepared in homogeneous solution in advance. When the target was present, the dsDNA can be connected on the electrode surface and cause the enhancement of the negative charge on the electrode surface. Owing to electrostatic interaction and steric hindrance, Ru@SiO₂ NPs are difficult to diffuse to the electrode surface, resulting in a significantly reduced ECL signal. The decrease of ECL signal is linearly correlated with the logarithm of the HPV concentration under optimal conditions, with the detection range being 0.1 fM -5 pM with a limit of 1.41 aM. This innovative methodology expands the application of electrostatic interaction in ECL sensing, but can also easily develop biosensors for detecting other targets by changing the DNA sequence used in this strategy.

Ultrasensitive Immunosensor for Prostate-Specific Antigen Based on Enhanced Electrochemiluminescence by Vertically Ordered Mesoporous Silica-Nanochannel Film

Ultrasensitive and specific detection of prostate-specific antigen (PSA) in complex biological samples is crucial for early diagnosis and treatment of prostate-related diseases. Immunoassay with a simple sensing interface and ultrahigh sensitivity is highly desirable. Herein, a novel electroluminescence (ECL) immunosensing platform is demonstrated based on the equipment of vertically ordered mesoporous silica-nanochannel films (VMSFs) with PSA antibody, which is able to realize ultrasensitive detection of PSA in human serum. Through the electrochemically assisted self-assembly (EASA) method, the VMSF is easily grown on an indium tin oxide (ITO) electrode in a few seconds. Owing to a large surface area and the negatively charged surface, VMSF nanochannels display strong electrostatic attraction to the positively charged ECL luminophores (tris(2,2-bipyridyl) dichlororuthenium (II), (Ru(bpy)₃²⁺), leading to two orders-of-magnitude enhancement of ECL emission compared with that of the bare ITO electrode. The outer surface of the VMSF is functionalized with reactive epoxy groups, which further allows covalent attachment of PSA antibody (Ab) on the entry of nanochannels. As the combination of PSA with Ab decreases the ECL signal by hindering the mass transfer of ECL luminophores and coreactant, the developed immunosensor can achieve ultrasensitive detection of PSA ranging from 1 pg ml⁻¹ to 100 ng ml⁻¹ with a limit of detection (LOD) of 0.1 pg ml⁻¹. Considering the antifouling ability of the VMSF, sensitive detection of PSA in human serum is also realized. The proposed nanochannel-based immunosensor may open up a new way for the facile development of the universal immunosensing platform for rapid and ultrasensitive detection of disease markers.

An electrochemiluminescence dual “turn-on” strategy for alkaline phosphatase detection using a dual quenching Ru(bpy)32+ encapsulated zeolite imidazole metal organic framework

An electrochemiluminescence (ECL) dual “turn-on” strategy is first designed to detect alkaline phosphatase (ALP) using a dual quenching Ru(bpy)32+ encapsulated zeolite imidazole metal organic framework (Ru(bpy)32+@ZIF-90).

MXene-Derived Quantum Dot@Gold Nanobones Heterostructure-Based Electrochemiluminescence Sensor for Triple-Negative Breast Cancer Diagnosis

MXene material has been gradually studied in recent years due to its fascinating characteristics. This work developed a novel MXene-derived quantum dots (MQDs) @gold nanobones (Au NBs) heterostructure as the electrochemiluminescence (ECL) sensor. First, MXene and MQDs were synthesized via the green preparation process, which avoided the harm of hydrofluoric acid to humans and the environment. There was a strong ECL signal enhancement in the MQD@Au NBs heterostructure. On the one hand, Au NBs with surface plasmon resonance (SPR) effect acted as an "electronic regulator" that can transfer electrons to itself to control over-injection of electrons into the conduction band of MQDs. The luminous signal of MQDs can be efficiently generated and significantly amplified in the ECL sensing process. On the other hand, the work function of MQDs with excellent conductivity was relatively close to that of Au NBs in the heterostructure. So, ECL quenching caused by short-distance electron transfer between luminophore and Au nanomaterial has been effectively suppressed. The MQD@Au NBs heterostructure-based ECL sensing system was applied to determine miRNA-26a in the serum of patients with triple-negative breast cancer. It not only provides ideas for the green synthesis of MXene but also provides a guide for the application of MQD@Au NBs heterostructure in the field of ECL sensing.

Sensitive and selective "signal-off" electrochemiluminescence sensing of prostate-specific antigen based on an aptamer and molecularly imprinted polymer

Specific and sensitive determination of prostate-specific antigen (PSA) in complex real samples holds significant importance as it is an effective molecular biomarker for the clinical diagnosis of prostate cancer. Herein, we constructed a dual-recognition electrochemiluminescence (ECL) sensor based on both the recognition elements of an aptamer and molecularly imprinted polymers (MIP) for the selective and ultrasensitive determination of PSA. The aptamer was self-assembled on gold nanoparticle (AuNP) modified electrodes through Au-S bonds. Subsequently, a layer of MIP membrane was synthesized by electropolymerization of dopamine (DA) to fabricate an aptamer-MIP sensor. After the rebinding of PSA onto imprinted cavities, the ECL response of luminol in the solution decreased. This "signal-off" strategy was employed for PSA detection with a wide linear range and a low limit of detection of 5 pg mL^-1-50 ng mL^-1 and 3.0 pg mL^-1, respectively. Compared with individual aptamer sensors, the dual-recognition sensor showed higher specific recognition ability for the determination of PSA. Meanwhile, the good stability, reproducibility, and regenerability endowed the dual recognition sensor with favorable application value in early clinical diagnosis.