Snake Venom Identification via Fluorescent Discrimination

Molecular Memory Micromotors for Fast Snake Venom Toxin Dynamic Detection

The analysis and detection of snake venom toxins are a matter of great importance in clinical diagnosis for fast treatment and the discovery of new pharmaceutical products. Current detection methods have high associated costs and require the use of sophisticated bioreceptors, which in some cases are difficult to obtain. Herein, we report the synthesis of template-based molecularly imprinted micromotors for dynamic detection of α-bungarotoxin as a model toxin present in the venom of many-banded krait (Bungarus multicinctus). The specific recognition sites are built-in in the micromotors by incubation of the membrane template with the target toxin, followed by a controlled electrodeposition of a poly(3,4-ethylenedioxythiophene)/poly(sodium 4-styrenesulfonate) polymeric layer, a magnetic Ni layer to promote magnetic guidance and facilitate washing steps, and a Pt layer for autonomous propulsion in the presence of hydrogen peroxide. The enhanced fluid mixing and autonomous propulsion increase the likelihood of interactions with the target analyte as compared with static counterparts, retaining the tetramethylrhodamine-labeled α-bungarotoxin on the micromotor surface with extremely fast dynamic sensor response (after just 20 s navigation) in only 3 μL of water, urine, or serum samples. The sensitivity achieved meets the clinically relevant concentration postsnakebite (from 0.1 to 100 μg/mL), illustrating the feasibility of the approach for practical applications. The selectivity of the protocol is very high, as illustrated by the absence of fluorescence in the micromotor surface in the presence of α-cobratoxin as a representative toxin with a size and structure similar to those of α-bungarotoxin. Recoveries higher than 95% are obtained in the analysis of urine- and serum-fortified samples. The new strategy holds considerable promise for fast, inexpensive, and even onsite detection of several toxins using multiple molecularly imprinted micromotors with tailored recognition abilities.

Multiplex lateral flow assay development for snake venom detection in biological matrices

Bothrops and Lachesis are two of Brazil's medically most relevant snake genera, causing tens of thousands of bites annually. Fortunately, Brazil has good accessibility to high-quality antivenoms at the genus and inter-genus level, enabling the treatment of many of these envenomings. However, the optimal use of these treatments requires that the snake species responsible for the bite is determined. Currently, physicians use a syndromic approach to diagnose snakebite, which can be difficult for medical personnel with limited training in clinical snakebite management. In this work, we have developed a novel monoclonal antibody-based multiplex lateral flow assay for differentiating Bothrops and Lachesis venoms within 15 min. The test can be read by the naked eye or (semi)-quantitatively by a smartphone supported by a 3D-printed attachment for controlling lighting conditions. The LFA can detect Bothrops and Lachesis venoms in spiked plasma and urine matrices at concentrations spanning six orders of magnitude. The LFA has detection limits of 10-50 ng/mL in spiked plasma and urine, and 50-500 ng/mL in spiked sera, for B. atrox and L. muta venoms. This test could potentially support medical personnel in correctly diagnosing snakebite envenomings at the point-of-care in Brazil, which may help improve patient outcomes and save lives.

Recent Progress in Sensor Arrays: From Construction Principles of Sensing Elements to Applications

The traditional sensors are designed based on the "lock-and-key" strategy with high selectivity and specificity for detecting specific analytes, which however are not suitable for detecting multiple analytes simultaneously. With the help of pattern recognition technologies, the sensor arrays excel in distinguishing subtle changes caused by multitarget analytes with similar structures in a complex system. To construct a sensor array, the multiple sensing elements are undoubtedly indispensable units that will selectively interact with targets to generate the unique "fingerprints" based on the distinct responses, enabling the identification among various analytes through pattern recognition methods. This comprehensive review mainly focuses on the construction strategies and principles of sensing elements, as well as the applications of sensor array for identification and detection of target analytes in a wide range of fields. Furthermore, the present challenges and further perspectives of sensor arrays are discussed in detail.

Simultaneous identification of three clinically relevant peruvian pit vipers by multiplex loop-mediated isothermal amplification (mLAMP)

Previous knowledge about the taxonomic distribution of venomous snake species is very useful for epidemiological aspects of ophidism. Here, we sought to develop an assay for the differential identification of clinically relevant snakes in Peru: Bothrops atrox, Lachesis muta, and Crotalus durissus using a multiplex loop-mediated isothermal amplification (mLAMP) assay. For this, DNA was extracted from the shed snake skins and the mitochondrial genes Cytb, COI, and 12S rRNA were amplified and further sequenced, for the design of mLAMP reaction primers. For each snake species the forward and reverse primers, internal forward and reverse primers, and the loop primers were obtained, bearing the latter different fluorophores for product identification. Finally, the reaction was standardized in the presence of all primer sets, and an optimal amount of low molecular weight polyethyleneimine. The precipitated products were observed in a UV light transilluminator, finding a differential fluorescence according to the DNA used, with a detection limit to the naked eye in the range of 0.2-25 ng of DNA, within 30 min. This study is the first report on the use of mLAMP technology for the identification of venomous snakes.

Cactus-Inspired Photonic Crystal Chip for Attomolar Fluorescence Multi-analysis

Automation and efficiency requirements of environmental monitoring are the pursuit of spontaneous sampling and ultrasensitivity for current sensory systems or detection apparatuses. In this work, inspired by cactus hierarchical structures, we develop a cactus-inspired photonic crystal chip to integrate spontaneous droplet sampling and fluorescence enhancement for sensitive multi-analyte detection. A conical hydrophilic pattern on hydrophobic surfaces can give rise to unidirectional Laplace pressure, which drives droplet transport to the assigned photonic crystal site. The nanostructure of photonic crystals has bigger capillarity to drive the droplet wetting uniformly into the photonic crystal matrix while performing prominent fluorescence enhancement by their photonic bandgap. A low to attomolar (2.24 × 10-19 M) fluorescence limit of detection (LOD) sensitivity can be achieved by the synergy of spontaneous droplet sampling and fluorescence enhancement. Focused on eutrophic water problems and algae pollution monitoring, a femtomolar (1.83 × 10-15 M) LOD and identification of various microcystins in urban environmental water can be achieved. The suitable integration of the unidirectional droplet transport by Laplace pressure and fluorescence enhancement by photonic crystals can achieve the spontaneous sampling and signal enhancement for ultratrace detections and sample survey of environmental monitoring and disease diagnosis.

Polymerase chain reaction-based snake origin tracing in commercial venom crystals by targeting the mitochondrial D-loop

Snake venom is a valuable raw material for numerous therapeutic formulations because of its life-saving pharmacological potential. However, due to their high price, fake "snake venoms" have captured a significant portion of the global market, and there is currently no reliable reported DNA-based method available for quickly distinguishing between fakes and originals. Therefore, in this study, a set of newly designed snake-specific universal primers targeting mitochondrial D-loop fragments were employed to detect snake origins in commercial venom crystals by only simplex polymerase chain reaction analysis. Under the optimal thermal cycling conditions, only the 145-149 bp snake-specific mitochondrial D-loop fragments from pure and mixed backgrounds were amplified by the newly designed primers. Specificity was achieved by confirming no DNA amplification occurred in the DNA admixture of ten different chordates, and universality by individual DNA amplification of nine different snakes. The primers that efficiently amplified the minimum mitochondrial DNA contained in a total of 10^-2 ng in a 10.0 μl reaction were also successfully able to detect the snake origin in commercial cobra venom crystals. These findings suggest that the newly designed primers can be used to differentiate the original and fake commercial snake venom crystals in order to achieve the highest standards of snake venom-based medications through amplifying the snake-specific mitochondrial D-loop fragments.