Surface-Enhanced Electrochemiluminescence Imaging for Multiplexed Immunoassays of Cancer Markers in Exhaled Breath Condensates

Ppb-Level Ammonia Sensor for Exhaled Breath Diagnosis Based on UV-DOAS Combined with Spectral Reconstruction Fitting Neural Network

Ammonia (NH3) in exhaled breath (EB) has been a biomarker for kidney function, and accurate measurement of NH3 is essential for early screening of kidney disease. In this work, we report an optical sensor that combines ultraviolet differential optical absorption spectroscopy (UV-DOAS) and spectral reconstruction fitting neural network (SRFNN) for detecting NH3 in EB. UV-DOAS is introduced to eliminate interference from slow change absorption in the EB spectrum while spectral reconstruction fitting is proposed for the first time to map the original spectra onto the sine function spectra by the principle of least absolute deviations. The sine function spectra are then fitted by the least-squares method to eliminate noise signals and the interference of exhaled nitric oxide. Finally, the neural network is built to enable the detection of NH3 in EB at parts per billion (ppb) level. The laboratory results show that the detection range is 9.50-12425.82 ppb, the mean absolute percentage error (MAPE) is 0.83%, and the detection accuracy is 0.42%. Experimental results prove that the sensor can detect breath NH3 and identify EB in simulated patients and healthy people. Our sensor will serve as a new and effective system for detecting breath NH3 with high accuracy and stability in the medical field.

An "off-on-enhanced on" electrochemiluminescence biosensor based on resonance energy transfer and surface plasmon coupled 3D DNA walker for ultra-sensitive detection of microRNA-21

In this study, a novel electrochemiluminescence (ECL) biosensor was developed to detect microRNA-21 (miRNA-21) with high sensitivity by leveraging the combined mechanisms of resonance energy transfer (RET) and surface plasmon coupling (SPC). Initially, the glassy carbon electrode (GCE) were coated with Cu-Zn-In-S quantum dots (CZIS QDs), known for their defect-related emission suitable for ECL sensing. Subsequently, a hairpin DNA H3 with gold nanoparticles (Au NPs) attached at the end was modified over the surface of the quantum dots. The Au NPs could effectively quench the ECL signals of CZIS QDs via RET. Further, a significant amount of report DNA was generated through the action of a 3D DNA walker. When the report DNA opened H3-Au NPs, the hairpin structure experienced a conformational change to a linear shape, increasing the gap between the CZIS QDs and the Au NPs. Consequently, the localized surface plasmon resonance ECL (LSPR-ECL) effect replaced ECL resonance energy transfer (ECL-RET). Moreover, the report DNA was released following the addition of H4-Au NPs, resulting in the formation of Au dimers and a surface plasma-coupled ECL (SPC-ECL) effect that enhanced the ECL intensity to 6.97-fold. The integration of new ECL-RET and SPC-ECL biosensor accurately quantified miRNA-21 concentrations from 10-8 M to 10-16 M with a limit of detection (LOD) of 0.08 fM, as well as successfully applied to validate human serum samples.

Recent Advances in Electrochemiluminescence Visual Biosensing and Bioimaging

Electrochemiluminescence (ECL) is one of the most powerful techniques that meet the needs of analysis and detection in a variety of scenarios, because of its highly analytical sensitivity and excellent spatiotemporal controllability. ECL combined with microscopy (ECLM) offers a promising approach for quantifying and mapping a wide range of analytes. To date, ECLM has been widely used to image biological entities and processes, such as cells, subcellular structures, proteins and membrane transport properties. In this review, we first introduced the mechanisms of several classic ECL systems, then highlighted the progress of visual biosensing and bioimaging by ECLM in the last decade. Finally, the characteristics of ECLM were summarized, as well as some of the current challenges. The future research interests and potential directions for the application of ECLM were also outlooked.

Synergetic surface enhancement of quantum dots-based electrochemiluminescence with photonic crystal light scattering and metal surface plasmon resonance for sensitive bioanalysis

Noble metal nanostructures and photonic crystals (PhCs) have been widely investigated as substrates for constructing surface enhanced electrochemiluminescence (SE-ECL) biosensors. However, their applications are hindered by the limited enhancement intensity of surface plasmon resonance (SPR) and an incomplete mechanism for the photonic enhancement effect. Hence, developing a novel SE-ECL strategy with better signal enhanced capability and enriching our understanding of the intrinsic mechanisms for efficient bioanalysis is extremely urgent. Here, a synergistic SE-ECL strategy was developed for the sensitive determination of prostate specific antigen (PSA) protein. The randomly arranged polystyrene (r-PS) spheres and PS PhC arrays were applied to enhance the ECL emission of cadmium sulfide quantum dots (CdS QDs) and the results suggested that the PhC arrays displayed superior intensity (0.22) than the r-PS interface (0.10). Au nanoparticles (NPs) were introduced onto the two kinds of surfaces and further boosted the ECL intensity. According to the ECL measurements, Au NPs modified at the r-PS surface exhibited only a slight increase (0.13), while the PhC arrays showed approximately 5-fold enhancement (0.92), benefiting from the synergistic enhancement. The finite-difference time-domain (FDTD) simulation indicated that the ECL enhancement was ascribed to the coupled electromagnetic (EM) field at the surfaces of PS PhCs and Au NPs. The SE-ECL could achieve a detection range from 1 pg/mL to 1 μg/mL with a detection limit of 0.41 pg/mL (S/N = 3). This study provides the first combination of PhC arrays and metal surface plasmon nanostructure for the synergetic enhancement of SE-ECL systems. It opens a new avenue for the rational design of advanced ECL biosensors and shows great perspective for clinical diagnosis.

Immunomultiple PCR-based electrochemical and lateral flow strategy for the simultaneous detection of liver cancer tumor markers

The current use of the single serum biomarker α-fetoprotein (AFP) in clinical practice has limitations in terms of specificity and sensitivity. We propose a strategy that combines antigen capture polymerase chain reaction (AC-PCR), lateral flow assay (LFA), and electrochemical biosensors to detect both AFP and circulating tumor cells (CTCs) in liver cancer serum. First, we used the AC-PCR technique to achieve target separation, purification, signal conversion, and amplification, eliminating target heterogeneity. Then, we achieved rapid results through the LFA and electrochemical biosensor platforms. As a result, the proposed assay has limits of 5 cells/mL for CTCs and 5 µg/L for AFP. The proposed method was applied effectively to simulated blood samples. This method has the potential to play a role in early liver cancer and provide a potential application for the diagnosis and precision treatment of liver cancer.

Atomically Fe-anchored MOF-on-MOF nanozyme with differential signal amplification for ultrasensitive cathodic electrochemiluminescence immunoassay

The successful application of electrochemiluminescence (ECL) in immunoassays for clinical diagnosis requires stable electrodes and high-efficient ECL signal amplification strategies. Herein, the authors discovered a new class of atomically dispersed peroxidase-like nanozymes with multiple active sites (CoNi-MOF@PCN-224/Fe), which significantly improved the catalytic performance and uncovered the underlying mechanism. Experimental studies and theoretical calculation results revealed that the nanozyme introduced a Fenton-like reaction into the catalytic system and the crucial synergistic effects of definite active moieties endow CoNi-MOF@PCN-224/Fe strong electron-withdrawing effect and low thermodynamic activation energy toward H2O2. Benefiting from the high peroxidase-like activity of the hybrid system, the resultant ECL electrode exhibited superior catalytic activity in the luminol-H2O2 system and resulted in an ≈17-fold increase in the ECL intensity. In addition, plasmonic Ag/Au core-satellite nanocubes (Ag/AuNCs) were designed as high-efficient co-reactant quenchers to improve the performance of the ECL immunoassay. On the basis of the differential signal amplification strategy (DSAS) proposed, the immunoassay displayed superior detection ability, with a low limit of detection (LOD) of 0.13 pg mL-1 for prostate-specific antigen (PSA). The designed atomically anchored MOF-on-MOF nanozyme and DSAS strategy provides more possibilities for the ultrasensitive detection of disease markers in clinical diagnosis.

Ru(II)-modified metal organic framework as excellent electrochemiluminescence emitter for ultrasensitive nicotine detection

The sensitive and selective nicotine detection in cigarette is necessary due to the cigarette addiction problem and the neurotoxicity of nicotine on human body. In this study, a novel electrochemiluminescence (ECL) emitter with excellent performance was prepared for nicotine analysis, by combining Zr-based metal organic framework (Zr-MOF) and branched polyethylenimine (BPEI)-coated Ru(dcbpy)₃²⁺ through electrostatic interaction. Ru(dcbpy)₃²⁺ integrated by Zr-MOF could be catalyzed by the reaction intermediates SO₄^•-, produced from the co-reactant S₂O₈^2-, resulting in a significant increase in ECL response. Interestingly, SO₄^•- with strong oxidizing ability could preferentially oxidize nicotine, leading to ECL quenching. The constructed ECL sensor based on the Ru-BPEI@Zr-MOF/S₂O₈^2- system displayed ultrasensitive determination of nicotine with a lower detection limit of 1.9 × 10^-12 M (S/N = 3), which is three orders lower than previously reported ECL results and 4-5 orders lower than that of other types of method. This method puts forward a new approach for building efficient ECL system with greatly improved ECL sensitivity for nicotine detection.

Electrostatic Interaction-Induced Aggregation-Induced Emission-Type AgAu Bimetallic Nanoclusters as a Highly Efficient Electrochemiluminescence Emitter for Ultrasensitive Detection of Glial Fibrillary Acidic Protein

Herein, the aggregation-induced emission (AIE)-type carboxymethyl chitosan (CMCS)@6-aza-2-thiothymine (ATT) templated AgAu bimetallic nanoclusters (CMCS@ATT-AgAu BMNCs) with superior electrochemiluminescence (ECL) emission were first synthesized to construct a biosensor for the ultrasensitive detection of glial fibrillary acidic protein (GFAP). Impressively, unlike the traditional AIE-type bimetallic nanoclusters (BMNCs) obtained by complicated multi-step synthesis, the AIE-type CMCS@ATT-AgAu BMNCs were prepared by the electrostatic interaction between the negatively charged ATT and positively charged CMCS, in which the molecule ATT was served as a capping and reducing agent of bimetal ions. In addition, a rapidly moving cholesterol labeled DNA walker was constructed to move freely on the lipid bilayer to increase its moving efficiency, and the well-regulated DNA was intelligently designed to further improve its walking efficiency for rapid and ultrasensitive detection of GFAP with a limit of detection (LOD) as low as 73 ag/mL. This strategy proposed an avenue to synthesize highly efficient BMNCs-based ECL emitters, which have great potential in ultrasensitive biosensing for early diagnosis of diseases.

A novel PCR-free and label-free cloth-based DNA sensor for sensitive and rapid detection of Escherichia coli

BACKGROUND

As is known to all, pathogenic bacteria have a serious impact on human health. The development of sensitive, simple, rapid and low-cost bacterial detection method is necessary. Nowadays, some conventional methods (such as plate count, polymerase chain reaction (PCR) and immunological techniques) can not meet the above needs. This work was aimed at providing a new method for addressing these unmet needs.

RESULT

This study proposed a novel PCR-free and label-free DNA sensor based on multiple linear hybridization chain reaction (ML-HCR) and cloth-based closed bipolar electrochemiluminescence for sensitive and rapid detection of Escherichia coli (E. coli). The target DNA can be obtained from the E. coli genomic DNA by using the restriction enzyme instead of PCR. The auxiliary probe-triggered ML-HCR is carried out with continuous hybridization of two hairpin DNA, and as a result the double stranded DNA is formed to provide a large number of binding sites for Ru(bpy)₃²⁺. The whole detection is PCR-free and label-free, and thus the detection procedure is easier and faster. Under optimized conditions, the linear detection range was from 10² to 10⁷ CFU/mL, and the detection limit was low to 38 CFU/mL. In addition, the proposed DNA sensor has an acceptable selectivity, stability and reproducibility, and is successfully applied to detect E. coli in milk samples with the recoveries from 96.24% to 105.98%.

SIGNIFICANCE

The proposed DNA sensor has broad application prospects in the fields of bacterial detection and gene diagnose. Further, this method has potential to be extended for establishing miniaturized, integrated, and automated detection system.

Framework and Spherical Nucleic Acids Synergistically Enhanced Electrochemiluminescence Nanosensors for Rapidly Diagnosing Acute Myocardial Infarction Based on Circulating MicroRNA Levels

Acute myocardial infarction (AMI)-related microRNAs (miRNAs) in circulating blood have been proved as promising biomarkers for AMI diagnosis. The detection of these miRNAs at ultralow levels usually requires nucleic acid amplification strategies to improve the sensitivity at the cost of time. Given that the first hour after an AMI attack is the golden time for saving AMI patients' lives, shortening the time of ultrasensitive miRNA analysis is of great significance for clinical AMI diagnosis. Toward this goal, here we present a direct electrochemiluminescence (ECL) sensing strategy for fast and ultrasensitive miRNA detection, circumventing the time-consuming signal amplification steps. Target miRNAs are directly hybridized with two probe strands that are attached to a covalently hemin-modified spherical nucleic acid enzyme (SNAzyme) and a truncated triangular pyramid DNA nanoplatform on the electrode, respectively. Both of them improve the ECL signal and meanwhile reduce the background, thereby remarkably promoting the detection sensitivity of target miRNAs. It enables the rapid detection of an AMI-related miRNA (miR-499) at 10 aM in human serum within 30 min using the SNAzyme-catalyzed luminol-H₂O₂ ECL reaction. This sensing strategy is then utilized for AMI diagnosis via probing endogenous miR-499 in patients' circulating blood with endogenous miR-16 as an intrinsic reference, showing a significant difference (P < 0.001) between the miR-499 levels of patients and the healthy.

In2O3/CdIn2S4 heterojunction-based photoelectrochemical immunoassay of carcinoembryonic antigen with enzymatic biocatalytic precipitation for signal amplification

This work reported a split-type photoelectrochemical (PEC) immunoassay for the detection of carcinoembryonic antigen (CEA) based on target-induced biocatalytic precipitation (BCP) by using In₂O₃/CdIn₂S₄ heterojunctions as the photosensitizers. The synthesized In₂O₃/CdIn₂S₄ heterojunctions improved the efficiency of charge separation and shortened the electron convey path to enhance the photocurrent, thus exhibiting high conductivity and low complexation rates of photogenerated electrons and holes. In the presence of CEA, horseradish peroxidase (HRP) catalyzed 4-chloro-1-naphthol (4-CN) to produce benzo-4-chloro-hexadienone (4-CD) through H₂O₂. Then, 4-CD was deposited onto the surface of In₂O₃/CdIn₂S₄ to reduce the photocurrent and realized the signal amplification. The PEC immunoassay revealed an excellent photocurrent toward target CEA within a wide range of 0.01-50 ng mL^-1 at a low limit of detection of 2.8 pg mL^-1 under the optimum conditions. Multiple switching light excitation tests demonstrated the good reliability and stability of the fabricated PEC biosensor. The accuracy was acceptable in comparison with human CEA enzyme-linked immunosorbent assay (ELISA) kit.

Strategies for Enhancing the Sensitivity of Electrochemiluminescence Biosensors

Electrochemiluminescence (ECL) has received considerable attention as a powerful analytical technique for the sensitive and accurate detection of biological analytes owing to its high sensitivity and selectivity and wide dynamic range. To satisfy the growing demand for ultrasensitive analysis techniques with high efficiency and accuracy in complex real sample matrices, considerable efforts have been dedicated to developing ECL strategies to improve the sensitivity of bioanalysis. As one of the most effective approaches, diverse signal amplification strategies have been integrated with ECL biosensors to achieve desirable analytical performance. This review summarizes the recent advances in ECL biosensing based on various signal amplification strategies, including DNA-assisted amplification strategies, efficient ECL luminophores, surface-enhanced electrochemiluminescence, and ratiometric strategies. Sensitivity-enhancing strategies and bio-related applications are discussed in detail. Moreover, the future trends and challenges of ECL biosensors are discussed.

Coreactant-free and Near-Infrared Electrochemiluminescence Immunoassay with n-Type Au Nanocrystals as Luminophores

The electrochemiluminescence (ECL) bioassay is prominently carried out with the involvement of the coreactant. To remove the detrimental effects of the coreactant on the ECL of luminophores, herein, a promising ECL immunoassay strategy with biocompatible nanoparticles as the luminophore is proposed, which involves directly and electrochemically oxidizing the luminophore methionine-capped Au (Met@Au) nanocrystals (NCs) without the participation of any coreactant. Met@Au NCs are a kind of n-type nanoparticles, and they can be electrochemically injected with valence band (VB) holes around +0.80 and +1.10 V (vs Ag/AgCl). The electrochemically injected exogenous VB hole can recombine with the endogenous conduction band electron of Met@Au NCs and eventually bring out two coreactant-free and near-infrared ECL processes around 0.80 V (ECL-1) and 1.10 V (ECL-2). The intensity of coreactant-free ECL is primarily determined by the electrochemical oxidation-induced hole-injection process. ECL-2 is considerably stronger than ECL-1 and can be exploited for determining the carcinoembryonic antigen (CEA) in a sandwich immunoassay procedure with a linear range from 0.1 to 50 pg/mL as well as a limit of detection of 0.03 pg/mL (S/N = 3).