Conductive Covalent Organic Frameworks with Conductivity- and Pre-Reduction-Enhanced Electrochemiluminescence for Ultrasensitive Biosensor Construction

Design and preparation of a multi-responsive Cd-based fluorescent coordination polymer for smart sensing of nitrobenzene and ornidazole

The improper utilization of nitrobenzene (NB) and ornidazole (ORN) has resulted in irreversible effects on the environment. By combining experimental investigation, density functional theory (DFT) calculations, and machine learning, an effective green strategy for detecting NB and ORN in aqueous solutions can be developed. In this study, a one-dimensional Cd-based coordination polymer (Cd-HCIA-3) was designed and synthesized using 5-((4-carboxybenzyl)oxy)isophthalic acid and rigid 2,2'-bipyridine under solvothermal reaction conditions. Cd-HCIA-3 exhibits excellent fluorescence properties and stability in aqueous solutions. DFT calculations were performed to predict the fluorescence sensing performance of Cd-HCIA-3, revealing that photoinduced electron transfer is the key mechanism for inducing fluorescence quenching in the presence of NB and ORN, with weak molecular interactions promoting electron transfer. Fluorescence sensing experiments were conducted to verify the DFT results, showing that Cd-HCIA-3 can selectively detect NB and ORN in aqueous solutions with limits of detection of 7.22 × 10-8 and 1.31 × 10-7 mol/L, respectively. This study's findings provide valuable insights into the design and synthesis of fluorescent coordination polymers for target analytes.

Optically Pure Co(III) Complex Absorbed by Electrochemiluminescence-Active Covalent Organic Framework as an Enantioselective Recognition Platform to Give Opposite Responses Toward Amino Alcohol Enantiomers

Although covalent organic frameworks (COFs) accompanied by electrochemiluminescence (ECL) behavior have been introduced in recent years, they are still rarely applied for ECL-based enantioselective sensing, especially giving high recognition efficiency. In the current study, an achiral ionic COF comprised of the pyridinium unit is synthesized in the linkage of the carbon-nitrogen cation bond through the Zincke reaction. Interestingly, the synthesized ionic COF can generate clear ECL owing to the presence of electroactive species. Then, the ECL-active achiral COF is employed to absorb the chiral Co(III) complex for enantioselective sensing. As a result, the developed ECL sensor displays discriminative responses toward amino alcohol enantiomers. When the chiral Co(III) complex with (R)-configuration is used, the examined (S)-amino alcohols result in ECL enhancement, whereas (R)-amino alcohols lead to ECL quenching. The maximum ECL intensity ratio between (S)- and (R)-amino alcohols is up to 47.7. In addition, the recognition mechanism is investigated in detail. Finally, a good linear relation between enantiomeric composition and ECL intensity is developed and appropriate for the accurate analysis of the enantiomeric purities of unknown samples. In short, we believe that this study constructs an effective strategy to combine the respective advantages of COFs and ECL for high-efficiency enantioselective sensing.

Automated ECL Aptasensing Platform from an Intrarticular Radical Annihilation Route for Distinguishing Glioma Stages

Nowadays, continuous efforts have been devoted to designing stable and high-efficiency electrochemiluminescence (ECL) emitters as alternatives for tris(2,2'-bipyridine)-ruthenium(II) (Ru(bpy)32+) in medical research. Herein, a novel ECL emitter was obtained by coordinating crystalline covalent triazinyl frameworks (cCTFs) with Ru2+ (termed Ru-cCTFs), which exhibited strong ECL emission by the ligand to metal charge transfer (LMCT) route. After its integration with 4-mercaptopyridine (SH-Py), the resultant SH-Py-Ru-cCTFs achieved 2.3-fold enhancement in the ECL efficiency by employing Ru(bpy)32+ as a standard, which involved a dynamic "intrarticular radical annihilation" ECL pathway. On such foundation, an automated ECL (A-ECL) aptasensor was constructed with an "on-off-on" model and magnetic separation upon linkage of the SH-Py-Ru-cCTFs with streptavidin (SA) magnetic beads (MBs). This automatic assay of miRNA-182 showed a wider linear range from 1.0 to 100.0 fM with a correlation coefficient (R2) of 0.994, a lower limit of detection (LOD) down to 0.28 fM, and faster operation within 41 min. Impressively, this bioassay facilely distinguished the stages of glioma disease from clinical blood samples with high accuracy. Hence, this research sheds light on how to develop advanced ECL luminophores and an automatic method, showing substantial insights into pathogenesis research of gliomas.

Ionic Covalent-Organic Frameworks Composed of Anthryl-Extended Viologen as a Kind of Electrochemiluminescence Luminophore

Nowadays, covalent-organic frameworks (COFs) integrated with the electrochemiluminescence (ECL) behavior are highly desired owing to the significant advantages including multifunctionality, high sensitivity, and low background noise. Here, two ionic COFs (iCOFs) consisting of the anthryl-extended viologen as the backbone were designed and synthesized via the Zincke reaction. It is found for the first time that the as-prepared iCOFs accompanied by potassium persulfate as the coreactant can provide a clear ECL response in a water-bearing medium. The maximum ECL emissions of the iCOFs were in agreement with the photoluminescence spectra. Besides, cyclic voltammetry and electron paramagnetic resonance measurements reveal that the pyridinium unit was electrochemically reduced to afford the free radical. Then, it reacted with SO4·- to generate the excited-state [iCOF]*. Finally, [iCOF]* quickly returned to its ground state coupled with a clear ECL emission, yielding a maximum ECL quantum efficiency of 23.4% compared with tris(2,2'-bipyridyl) ruthenium(II) as the benchmark. In brief, the current study opens a way to develop a kind of ECL emitter that holds great potential in sensing, imaging, and light-emitting devices.

Low-triggering-potential electrochemiluminescence based on mental-organic frameworks encapsulation of ruthenium for synthetic cathinone detection by coupling photonic crystal light-scattering signal amplification of covalent-organic frameworks

Developing effective electrochemiluminescence (ECL) platforms is always an essential concern in highly sensitive bioanalysis. In this work, a low-triggering-potential ECL sensor was designed for detecting synthetic cathinone 3,4-methylenedioxypyrovalerone (MDPV) based on a dual-signal amplification strategy. Initially, a probe was created by integrating Ruthenium into the hollow porphyrin-based MOF (PCN-222) structure to decrease the excitation potential and enhance ECL performance without external co-reaction accelerators. Additionally, for the first time, photonic crystals (PCs) assembled from covalent organic frameworks (COFs) were employed to amplify the ECL signal, thereby increasing the photon flux and the loading capacity of the ECL emitter to enhance sensitivity of the sensor. In the presence of the target MDPV, the aptamer labeled with Ferrocene (Fc) experienced conformational changes, causing Fc to approach the luminophore and resulting in ECL quenching. This effect was attributed to aptamer's conformational changes induced by the target, directly correlating with the target concentration. The constructed sensor showed good linearity with the target MDPV concentration, covering a dynamic range from 1.0 × 10-14 to 1.0 × 10-6 g/L and achieved an ultra-low detection limit of 4.79 × 10-15 g/L. This work employed dual amplification strategies to enhance ECL signals effectively, providing a novel method for developing highly responsive and bioactive sensors.

Pyrenetetrasulfonate-grafted 2D ultrathin metal-organic layer as new electrochemiluminescence emitters for ultrasensitive microRNA-21 assay

The exploration of novel electrochemiluminescence (ECL) luminophores with excellent ECL properties is a current research hotspot in the ECL field. Herein, a novel high-efficiency Ru-complex-free ECL emitter PyTS-Zr-BTB-MOL has been prepared by using porous ultrathin Zr-BTB metal-organic layer (MOL) as carrier to coordinatively graft the cheap and easily available polycyclic aromatic hydrocarbon (PAH) derivative luminophore PyTS whose ECL performance has never been investigated. Gratifyingly, the ECL intensity and efficiency of PyTS-Zr-BTB-MOL were markedly enhanced compared to both PyTS monomers and PyTS aggregates. The main reason was that the distance between pyrene rings was greatly expanded after the PyTS grafting on the Zr6 clusters of Zr-BTB-MOL, which overcame the aggregation-caused quenching (ACQ) effect of PyTS and thus enhanced the ECL emission. Meanwhile, the porous nanosheet structure of PyTS-Zr-BTB-MOL could distinctly increase the exposure of PyTS luminophores and shorten the diffusion paths of coreactants and electrons/ions, which effectively promoted the electrochemical excitation of more PyTS luminophores and thus achieved a further ECL enhancement. In light of the remarkable ECL property of PyTS-Zr-BTB-MOL, it was employed as an ECL indicator to build a novel high-sensitivity ECL biosensor for microRNA-21 determination, possessing a satisfactory response range (100 aM to 100 pM) and an ultralow detection limit (10.4 aM). Overall, this work demonstrated that using MOLs to coordinatively graft the PAH derivative luminophores to eliminate the ACQ effect and increase the utilization rate of the luminophores is a promising and efficient strategy to develop high-performance Ru-complex-free ECL materials for assembling ultrasensitive ECL biosensing platforms.

Ultrastable Anion Radicals in Ligand-Dimerized Frameworks for Self-Accumulated Electrochemiluminescence

Electrochemiluminescence (ECL) is a light-emitting process that occurs via an annihilation reaction among energetic radical intermediates, whose stabilities determine the ECL efficiency. In this study, a ligand-dimerized metal-organic framework (MOF) with ultrastable anion radical is designed as an efficient nanoemitter for self-accumulated ECL. Due to the nonplanar structure of perylene diimide (PDI) derivate, two PDI ligands in the framework form a J-dimer unit with a vertical distance of ∼5.74 Å. In cathodic scanning, the ligand-dimerized MOF demonstrates three-step ECL emissions with a gradual increase in ECL intensity. Unlike the decrease in the PDI ligand, the self-accumulated ECL of the MOF was observed with 16.8-fold enhancement due to the excellent stability of radical intermediates in frameworks. Electron paramagnetic resonance demonstrated the ultrastability of free radicals in the designed frameworks, with 82.2% remaining even after one month of storage. Density functional theory calculations supported that PDI dimerization was energetically favorable upon successive electron injection. Moreover, the ECL wavelength is 610 nm, corresponding to the emission of excited dimers. The radical-stabilized reticular nanoemitters open up a new platform for decoding the fundamentals of self-accumulated ECL systems.

Rigidifying AIEgens in covalent organic framework nanosheets for electrochemiluminescence enhancement: TABE-PZ-CON as a novel emitter for microRNA-21 detection

Enhancing electrochemiluminescence (ECL) properties of luminophores is a hot direction in the current ECL field. Herein, we found that covalent rigidification of the aggregation-induced emission luminogens (AIEgens) TABE (TABE = tetra-(4-aldehyde-(1,1-biphenyl))ethylene) into covalent organic framework nanosheets (TABE-PZ-CON, PZ = piperazine) could result in stronger ECL emission than those of TABE aggregates and TABE monomers. We termed the interesting phenomenon "covalent rigidification-triggered electrochemiluminescence (CRT-ECL) enhancement". The superior ECL performance of TABE-PZ-CON not only because massive TABE luminogens were covalently assembled into the rigid TABE-PZ-CON network, which limited the intramolecular motions of TABE and hampered the radiationless transition, but also because the ultrathin porous TABE-PZ-CON significantly reduced the transportation distance of ions, electrons, and coreactants, which enabled the electrochemical excitation of more TABE luminogens and thus enhanced the ECL efficiency. Bearing in mind the exceptional ECL performance of TABE-PZ-CON, it was utilized as a high-efficient ECL indicator in combination with the DNA walker and duplex-specific nuclease-assisted target recycling amplification strategies to design an "off-on" ECL biosensor for the ultrasensitive assay of microRNA-21, exhibiting a favorable response range (100 aM-1 nM) with an ultralow detection limit of 17.9 aM. Overall, this work offers a valid way to inhibit the intramolecular motions of AIEgens for ECL enhancement, which gives a new vision for building high-performance AIEgen-based ECL materials, thus offering more chances for assembling hypersensitive ECL biosensors.

COF-Based Photocatalysts for Enhanced Synthesis of Hydrogen Peroxide

Covalent Organic Frameworks (COFs), with their intrinsic structural regularity and modifiable chemical functionality, have burgeoned as a pivotal material in the realm of photocatalytic hydrogen peroxide (H2O2) synthesis. This article reviews the recent advancements and multifaceted approaches employed in using the unique properties of COFs for high-efficient photocatalytic H2O2 production. We first introduced COFs and their advantages in the photocatalytic synthesis of H2O2. Subsequently, we spotlight the principles and evaluation of photocatalytic H2O2 generation, followed by various strategies for the incorporation of active sites aiming to optimize the separation and transfer of photoinduced charge carriers. Finally, we explore the challenges and future prospects, emphasizing the necessity for a deeper mechanistic understanding and the development of scalable and economically viable COF-based photocatalysts for sustainable H2O2 production.

Co-Reactive Ligand In Situ Engineered Gold Nanoclusters with Ultra-Bright Near-Infrared Electrochemiluminescence for Ultrasensitive and Label-Free Detection of Carboxylesterase Activity

Ultrasensitive and accurate monitoring of carboxylesterase (CE) activity is extremely crucial for the early diagnosis of hepatocellular carcinoma (HCC), which is still a considerable challenge. Herein, using a co-reactive ligand engineering strategy, ultra-bright near-infrared (λmax = 830 nm) and self-enhanced electrochemiluminescence (ECL) Au nanoclusters (NCs) were in situ prepared with 2-(diethylamino) ethanethiol (DEAET) as a co-reactive ligand. Remarkably, the co-reactive ligand not only acts as a stabilizer like traditional ligands but also plays a crucial role as a co-reactant to ensure a confinement effect to shorten the charge transfer distance and increase the local concentration, significantly improving the collision efficiency between the electrogenerated free radicals. Consequently, the DEAET Au NCs exhibited a record and stable anodal ECL without the addition of an exogenous co-reactant, dramatically superior to classical Au NCs and Ru(bpy)32+ with a certain amount of the co-reactant. As a proof of concept, a convenient and label-free CE biosensor was innovatively constructed using 1-naphthyl acetate as a selective substrate, achieving ultrasensitive detection for CE activity with a low limit of detection of 9.1 × 10-7 U/L. Therefore, this work not only paves a co-reactive ligand engineering strategy for in situ preparation of high-efficiency metal NCs but also provides an ultrasensitive and convenient platform for the early diagnosis of HCC.

Sub-Second Electrochemiluminescence Imaging Assay of SARS-CoV-2 Nucleocapsid Protein Based on Reticulation of Endo-Coreactants

The nonphotodriven electrochemiluminescence (ECL) imageology necessitates concentrated coreacting additives plus longtime exposures. Seeking biosafe and streamlined ensembles can help lower the bar for quality ECL bioimaging to which call the crystallized endo-coreaction in nanoreticula might provide a potent solution. Herein, an exo-coreactant-free ECL visualizer was fabricated out in one-pot, which densified the dyad triethylamine analogue: 1,4-diazabicyclo-[2.2.2]octane (DABCO) in the lamellar hive of 9,10-di(p-carboxyphenyl)anthracene (DPA)-Zn2+. This biligated non-noble metal-organic framework (m-MOF) facilitated a self-contained anodic ECL with a yield as much as 70% of Ru(bPy)32+ in blank phosphate buffered saline. Its featured two-stage emissions rendered an efficient and endurant CCD imaging at 1.0 V under mere 0.5 s swift snapshots and 0.1 s step-pulsed stimulation. Upon structural and spectral cause analyses as well as parametric set optimization, simplistic ECL-graphic immunoassay was mounted in the in situ imager to enact an ultrasensitive measurement of coronaviral N-protein in both signal-on and off modes by the privilege of straight surface amidation on m-MOFs, resulting in a wide dynamic range (10-4-10 ng/mL), a competent detection limit down to 56 fg/mL, along with nice precision and parallelism in human saliva tests. The overall work manifests a rudimentary endeavor in self-sufficient ECL visuality for brisk, biocompatible, and brilliant production of point-of-care diagnostic "Big Data".

Electrochemiluminescence enhanced by isolating ACQphores in imine-linked covalent organic framework for organophosphorus pesticide assay

Most of covalent organic frameworks (COFs) are non or weakly emissive due to either the molecular thermal motion-mediated energy dissipation or the aggregation-caused quenching (ACQ) effect. Herein, we synthesize an imine-linked COF (TFPPy-TPh-COF) with high electrochemiluminescence (ECL) emission and the capability of eliminating the ACQ effect and further construct an ECL sensor for malathion detection. The imine-linked COF is obtained by the condensation reaction of (1,1':3',1″-terphenyl)-4,4″-diamine (TPh) and 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPPy), and it has higher ECL efficiency than TFPPy aggregates due to the separation of ACQ luminophores (i.e., TFPPy) from each other by TPh and the restriction of intramolecular motions of TFPPy and TPh to reduce the nonradiative decay. The efficient quenching of ECL is achieved by electrochemiluminescence resonance energy transfer (ERET) from the excited state of the TFPPy-TPh-COF to zeolite imidazolate framework-8 (ZIF-8) and the steric hindrance of ZIF-8. Acetylcholinesterase (AChE) can enzymatically hydrolyze acetylcholine (ACh) to generate acetic acid. The resultant acetic acid can trigger the dissolution of ZIF-8 to produce an enhanced ECL signal. Malathion as an organophosphorus pesticide serves as an AChE inhibitor to prevent the production of acetic acid, inducing the decrease of ECL signal. This sensor displays a limit of detection (LOD) of 2.44 pg/mL and a wide dynamic detection range of 0.01-1000 ng/mL. Furthermore, it can be used to detect other organophosphates pesticides (e.g., methidathion, chlorpyrifos, and paraoxon) and measure malathion in real samples (i.e., pakchoi, lettuce, and apples).

Advances of Electrochemical and Electrochemiluminescent Sensors Based on Covalent Organic Frameworks

Covalent organic frameworks (COFs), a rapidly developing category of crystalline conjugated organic polymers, possess highly ordered structures, large specific surface areas, stable chemical properties, and tunable pore microenvironments. Since the first report of boroxine/boronate ester-linked COFs in 2005, COFs have rapidly gained popularity, showing important application prospects in various fields, such as sensing, catalysis, separation, and energy storage. Among them, COFs-based electrochemical (EC) sensors with upgraded analytical performance are arousing extensive interest. In this review, therefore, we summarize the basic properties and the general synthesis methods of COFs used in the field of electroanalytical chemistry, with special emphasis on their usages in the fabrication of chemical sensors, ions sensors, immunosensors, and aptasensors. Notably, the emerged COFs in the electrochemiluminescence (ECL) realm are thoroughly covered along with their preliminary applications. Additionally, final conclusions on state-of-the-art COFs are provided in terms of EC and ECL sensors, as well as challenges and prospects for extending and improving the research and applications of COFs in electroanalytical chemistry.

Vesicles as a Multifunctional Microenvironment for Electrochemiluminescence Signal Amplification

Vesicles as a typical interface-rich microenvironment can promote the reaction rate and the intermediate stability, which are promising for introduction in electrochemiluminescence (ECL) signal amplification. In this work, a kind of multilamellar vesicle obtained from sodium bis(2-ethylhexyl) sulfosuccinate (AOT) was used to modify the electrode surface. The AOT vesicle-modified microenvironment could significantly enhance the ECL performances for the luminol/O2 system in a neutral medium. The mechanism study demonstrated that the nanoscale multilamellar vesicles could maintain the vesicle structure on the electrode surface, which substantially improved the electron transfer and reaction rate, luminescence efficiency of the excited-state 3-aminophthalate anion, and stability of the superoxide anion radical. Alternatively, such a multifunctional microenvironment was also able to enhance the ECL signals from the tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+)/tripropylamine (TPrA) system. Moreover, another dodecyl dimethyl(3-sulfopropyl) ammonium hydroxide inner salt (DSB)-based vesicle was constructed to further verify the versatility of the vesicle-modified microenvironment for ECL signal amplification. Our work not only provides a versatile microenvironment for improving the efficiency of various ECL systems but also offers new insights for the microenvironment construction using the ordered assemblies in ECL fields.

Guest Molecular Assembly Strategy in Covalent Organic Frameworks for Electrochemiluminescence Sensing of Uranyl

The application of covalent organic frameworks (COFs) in electrochemiluminescence (ECL) is promising in environmental monitoring. Developing an emerging design strategy to expand the class of COF-based ECL luminophores is highly desirable. Here, a COF-based host-guest system was constructed through guest molecular assembly to deal with nuclear contamination analysis. The efficient charge transport network was formed by inserting an electron-withdrawing guest tetracyanoquinodimethane (TCNQ) into the open space of the COF host (TP-TBDA; TP = 2,4,6-trihydroxy-1,3,5-benzenetricarbaldehyde and TBDA = 2,5-di(thiophen-2-yl)benzene-1,4-diamine) with an electron-donating property; the construction of the COF-based host-guest system (TP-TBDA@TCNQ) triggered the ECL emission of non-emitting TP-TBDA. Furthermore, the dense active sites in TP-TBDA were utilized to capture the target substance UO₂²⁺. The presence of UO₂²⁺ broke the charge-transfer effect in TP-TBDA@TCNQ, resulting in the weakening of the ECL signal, thus the established ECL system integrating the low detection limit with high selectivity monitors UO₂²⁺. This COF-based host-guest system provides a novel material platform for constructing late-model ECL luminophores and creates an opportunity for the vigorous ECL technology.

PEC thrombin aptasensor based on Ag-Ag2S decorated hematite photoanode with signal-down effect of precipitation catalyzed by G-quadruplexes/hemin

A photoelectrochemical (PEC) aptasensor for thrombin detection was rationally designed based on the photoanode of one-dimensional hematite nanorods (α-Fe₂O₃ NRs) with several steps of modifications. Uniform α-Fe₂O₃ NRs were grown vertically on the surface of fluorine-doped tin oxide (FTO) conductive glass through a one-step hydrothermal method; then Ag was grown on the surface of α-Fe₂O₃ NRs through a photoreduction method followed by a partial in-situ transformation into Ag₂S, conferring an improvement on the initial photocurrent. Two main critical factors, namely, the steric hindrance of thrombin, benzoquinone (BQ) precipitation oxidized by H₂O₂ under the catalysis of G-quadruplexes/hemin, contributed to the sensitive signal-down response toward the target. Photocurrent signals related with thrombin concentration was established for thrombin analysis due to the non-conductive complex as well as their competitive consumption of electron donors and irradiation light. The excellent initial photocurrent was combined with the signal-down amplification in the design of the biosensor, conferring a limit of detection (LOD) as low as 40.2 fM and a wide linear range from 0.0001 nM to 50 nM for the detection of thrombin. The proposed biosensor was also assessed in terms of selectivity, stability, and applicability in human serum analyses, which provided an appealing maneuver for the specific analysis of thrombin in trace amount.

Electrically Conductive Carbazole and Thienoisoindigo-Based COFs Showing Fast and Stable Electrochromism

Thienothiophene thienoisoindigo (ttTII)-based covalent organic frameworks (COFs) have been shown to offer low band gaps and intriguing optical and electrochromic properties. So far, only one tetragonal thienothiophene thienoisoindigo-based COF has been reported showing stable and fast electrochromism and good coloration efficiencies. We have developed two novel COFs using this versatile and nearly linear ttTII building block in a tetragonal and a hexagonal framework geometry to demonstrate their attractive features for optoelectronic applications of thienoisoindigo-based COFs. Both COFs exhibit good electrical conductivities, show promising optical absorption features, are redox-active, and exhibit a strong electrochromic behavior when applying an external electrical stimulus, shifting the optical absorption even farther into the NIR region of the electromagnetic spectrum and achieving absorbance changes of up to 2.5 OD. Cycle-stable cyclic voltammograms with distinct oxidation and reduction waves reveal excellent reversibility and electrochromic switching over 200 cycles and confirm the high stability of the frameworks. Furthermore, high coloration efficiencies in the NIR region and fast switching speeds for coloration/decoloration as fast as 0.75 s/0.37 s for the Cz-ttTII COF and 0.61 s/0.29 s for the TAPB-ttTII COF at 550 nm excitation were observed, outperforming many known electrochromic materials, and offering options for a great variety of applications, such as stimuli-responsive coatings, optical information processing, or thermal control.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Cu2O@PdAg-quenched CdS@CeO2 heterostructure electrochemiluminescence immunosensor for determination of prostate-specific antigen

Based on the resonance energy transfer between CdS@CeO₂ and Cu₂O@PdAg, a quenching immunosensor for sensitive detection of prostate specific antigen (PSA) was constructed. The CdS@CeO₂ heterostructure was obtained by in situ growth of CeO₂ particles on the surface of CdS nanorods, and stable cathodic ECL emission was achieved using K₂S₂O₈ as coreactant. Cu₂O@PdAg was composed of Cu₂O with tetradecahedral structure and bimetallic PdAg nanospheres and has a UV-V is absorption range between 600 and 800 nm. It overlaps with the ECL emission spectrum of CdS@CeO₂, realizing the effective quenching of the ECL signal, which provides feasibility for subsequent practical application. The immunosensor exhibited good linearity in the concentration range 10 fg·mL^-1 ~ 100 ng·mL^-1, with a detection limit of 5.6 fg·mL^-1. In sample analysis, the recoveries were 99.8-101%, and the relative standard deviation (RSD) was 0.85-1.6% showing great potential and development value for the sensitive detection of prostate cancer.

Nanomaterials-Based Electrochemiluminescence Biosensors for Food Analysis: Recent Developments and Future Directions

Developing robust and sensitive food safety detection methods is important for human health. Electrochemiluminescence (ECL) is a powerful analytical technique for complete separation of input source (electricity) and output signal (light), thereby significantly reducing background ECL signal. ECL biosensors have attracted considerable attention owing to their high sensitivity and wide dynamic range in food safety detection. In this review, we introduce the principles of ECL biosensors and common ECL luminophores, as well as the latest applications of ECL biosensors in food analysis. Further, novel nanomaterial assembly strategies have been progressively incorporated into the design of ECL biosensors, and by demonstrating some representative works, we summarize the development status of ECL biosensors in detection of mycotoxins, heavy metal ions, antibiotics, pesticide residues, foodborne pathogens, and other illegal additives. Finally, the current challenges faced by ECL biosensors are outlined and the future directions for advancing ECL research are presented.

Recent Progresses in Development of Biosensors for Thrombin Detection

Thrombin is a serine protease with an essential role in homeostasis and blood coagulation. During vascular injuries, thrombin is generated from prothrombin, a plasma protein, to polymerize fibrinogen molecules into fibrin filaments. Moreover, thrombin is a potent stimulant for platelet activation, which causes blood clots to prevent bleeding. The rapid and sensitive detection of thrombin is important in biological analysis and clinical diagnosis. Hence, various biosensors for thrombin measurement have been developed. Biosensors are devices that produce a quantifiable signal from biological interactions in proportion to the concentration of a target analyte. An aptasensor is a biosensor in which a DNA or RNA aptamer has been used as a biological recognition element and can identify target molecules with a high degree of sensitivity and affinity. Designed biosensors could provide effective methods for the highly selective and specific detection of thrombin. This review has attempted to provide an update of the various biosensors proposed in the literature, which have been designed for thrombin detection. According to their various transducers, the constructions and compositions, the performance, benefits, and restrictions of each are summarized and compared.

Mixed-Ligand-Regulated Self-Enhanced Luminous Eu-MOF as an ECL Signal Probe for an Oriented Antibody-Decorated Biosensing Platform

The self-luminescence behavior of lanthanide MOFs (Ln-MOFs) due to the unique antenna effect is considered to be a promising electrochemiluminescence (ECL) emission for biosensors. It is more challenging for Ln-MOFs on account of the difficulty to stimulate Ln ions with the desired energy-transfer efficiency to produce stronger ECL emissions at a low potential. Here, guided by a second ligand-assisted energy-transfer strategy, we present an efficient self-enhanced luminescence mixed-ligand Eu-MOF as an ECL signal probe for an oriented antibody-decorated biosensing platform with a low detection limit and a broad detection range. Diamino terephthalic acid (NH₂-H₂BDC) and 1,10-phenanthroline (Phen) were selected as the first and second ligands, respectively, to form highly conjugated structures, as well as suppress the nonradiative energy transfer. Impressively, Phen precisely adjusts the energy gap between the triplet ligand and the excited state of Eu³⁺, realizing the self-enhancement of ECL efficiency of the Eu-MOF. The mixed ligand adjusted the molar ratio to obtain the stable and strong ECL signal at a lowered triggering potential (0.83 V). In addition, FeCo@CNT features densely active FeCo sites along with a rich hierarchy conductive carbon nanotube (CNT) network, which is efficiently a co-reaction accelerator to produce more TPA^•+ radicals to accelerate the reduction process of the Eu-MOF for achieving the ECL emission amplification. FeCo@CNT with heptapeptide HWRGWVC (HWR) constructed a matrix biosensing interface that allowed the fragment antigen-binding (Fab) regions to target specific antigens and enhance the incubation efficiency. The present study has gone some way toward designing a self-enhanced luminous Eu-MOF, thus giving new fresh impetus to develop high-performance ECL emitters for biological analysis.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Progress and Prospects of Electrochemiluminescence Biosensors Based on Porous Nanomaterials

Porous nanomaterials have attracted much attention in the field of electrochemiluminescence (ECL) analysis research because of their large specific surface area, high porosity, possession of multiple functional groups, and ease of modification. Porous nanomaterials can not only serve as good carriers for loading ECL luminophores to prepare nanomaterials with excellent luminescence properties, but they also have a good electrical conductivity to facilitate charge transfer and substance exchange between electrode surfaces and solutions. In particular, some porous nanomaterials with special functional groups or centered on metals even possess excellent catalytic properties that can enhance the ECL response of the system. ECL composites prepared based on porous nanomaterials have a wide range of applications in the field of ECL biosensors due to their extraordinary ECL response. In this paper, we reviewed recent research advances in various porous nanomaterials commonly used to fabricate ECL biosensors, such as ordered mesoporous silica (OMS), metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and metal-polydopamine frameworks (MPFs). Their applications in the detection of heavy metal ions, small molecules, proteins and nucleic acids are also summarized. The challenges and prospects of constructing ECL biosensors based on porous nanomaterials are further discussed. We hope that this review will provide the reader with a comprehensive understanding of the development of porous nanomaterial-based ECL systems in analytical biosensors and materials science.