Glass Nanopore Detection of Copper Ions in Single Cells Based on Click Chemistry

Salt gradient enhanced sensitivity in nanopores for intracellular calcium ion detection

Intracellular calcium ion detection is of great significance for understanding the cell metabolism and signaling pathways. Most of the current ionic sensors either face the size issue or sensitivity limit for the intracellular solution with high background ion concentrations. In this paper, we proposed a calmodulin (CaM) functionalized nanopore for sensitive and selective Ca2+ detection inside living cells. A salt gradient was created when the nanopore sensor filled with a low concentration electrolyte was in contact with a high background concentration solution, which enhanced the surface charge-based detection sensitivity. The nanopore sensor showed a 10 × sensitivity enhancement by application of a 100-fold salt gradient, and a detection limit of sub nM. The sensor had a wide detection range from 1 nM to 1 mM, and allowed for quick calcium ion quantification in a few seconds. The sensor was demonstrated for intracellular Ca2+ detection in A549 cells in response to ionomycin.

A covalent organic framework nanosheet-nanochannel composite with signal amplification strategy for electrochemical enantioselective recognition

Recognition and separation of chiral isomers are of great importance in both industrial and biological applications. However, owing to identical molecular formulas and chemical properties of enantiomers, signal transduction and amplification are still two major challenges in chiral sensing. In this study, we developed an enantioselective device by integrating chiral covalent organic framework nanosheets (CONs) with nanochannels for sensitive identification and quantification of enantiomers. Using 3,4-dihydroxyphenylalanine (DOPA) as the model analyte, the as-prepared chiral nanofluidic device exhibits a remarkable chiral recognition ability to l-DOPA than d-DOPA. More importantly, due to the chelation of DOPA with Fe3+ ions, it can efficiently block the ion transport through channel and shield the channel surface charge, which will amplify the difference in the electrochemical response of l-DOPA and d-DOPA. Therefore, a sensitive chiral recognition can be achieved using the present nanofluidic device coupled using electrochemical amplification strategy. Notably, using this method, an ultra-low concentration of l-DOPA (as low as 0.21 pM) can be facilely and successfully detected with a linear range of 1 pM-10 μM. This study provides a reliable and sensitive approach for achieving highly selective detection of chiral molecules.

Solid-State Glass Nanopipettes: Functionalization and Applications

Solid-state glass nanopipettes provide a promising confined space that offers several advantages such as controllable size, simple preparation, low cost, good mechanical stability, and good thermal stability. These advantages make them an ideal choice for various applications such as biosensors, DNA sequencing, and drug delivery. In this review, we first delve into the functionalized nanopipettes for sensing various analytes and the methods used to develop detection means with them. Next, we provide an in-depth overview of the advanced functionalization methodologies of nanopipettes based on diversified chemical kinetics. After that, we present the latest state-of-the-art achievements and potential applications in detecting a wide range of targets, including ions, molecules, biological macromolecules, and single cells. We examine the various challenges that arise when working with these targets, as well as the innovative solutions developed to overcome them. The final section offers an in-depth overview of the current development status, newest trends, and application prospects of sensors. Overall, this review provides a comprehensive and detailed analysis of the current state-of-the-art functionalized nanopipette perception sensing and development of detection means and offers valuable insights into the prospects for this exciting field.

Silica Nanowires-Filled Glass Microporous Sensor for the Ultrasensitive Detection of Deoxyribonucleic Acid

DNA carries genetic information and can serve as an important biomarker for the early diagnosis and assessment of the disease prognosis. Here, we propose a bottom-up assembly method for a silica nanowire-filled glass microporous (SiNWs@GMP) sensor and develop a universal sensing platform for the ultrasensitive and specific detection of DNA. The three-dimensional network structure formed by SiNWs provides them with highly abundant and accessible binding sites, allowing for the immobilization of a large amount of capture probe DNA, thereby enabling more target DNA to hybridize with the capture probe DNA to improve detection performance. Therefore, the SiNWs@GMP sensor achieves ultrasensitive detection of target DNA. In the detection range of 1 aM to 100 fM, there is a good linear relationship between the decrease rate of current signal and the concentration of target DNA, and the detection limit is as low as 1 aM. The developed SiNWs@GMP sensor can distinguish target DNA sequences that are 1-, 3-, and 5-mismatched, and specifically recognize target DNA from complex mixed solution. Furthermore, based on this excellent selectivity and specificity, we validate the universality of this sensing strategy by detecting DNA (H1N1 and H5N1) sequences associated with the avian influenza virus. By replacing the types of nucleic acid aptamers, it is expected to achieve a wide range and low detection limit sensitive detection of various biological molecules. The results indicate that the developed universal sensing platform has ultrahigh sensitivity, excellent selectivity, stability, and acceptable reproducibility, demonstrating its potential application in DNA bioanalysis.

Dual-signal readout sensing of ATP content in single dental pulp stem cells during differentiation via functionalized glass nanopipettes

Adenosine triphosphate (ATP) is regarded as the "energy currency" in living cells, so real-time quantification of content variation of intracellular ATP is highly desired for understanding some important physiological processes. Due to its single-molecule readout ability, nanopipette sensing has emerged as a powerful technique for molecular sensing. In this study, based on the effect of targeting-aptamer binding on ionic current, and fluorescence resonance energy transfer (FRET), we reported a dual-signal readout nanopipette sensing system for monitoring ATP content variation at the subcellular level. In the presence of ATP, the complementary DNA-modified gold nanoparticles (cDNAs-AuNPs) were released from the inner wall of the nanopipette, which leads to sensitive response variations in ionic current rectification and fluorescence intensity. The developed nanopipette sensor was capable of detecting ATP in single cells, and the fluctuation of ATP content in the differentiation of dental pulp stem cells (DPSCs) was further quantified with this method. The study provides a more reliable nanopipette sensing platform due to the introduction of fluorescence readout signals. Significantly, the study of energy fluctuation during cell differentiation from the perspective of energy metabolism is helpful for differentiation regulation and cell therapy.

Recent advances of nanopore technique in single cell analysis

Single cells and their dynamic behavior are closely related to biological research. Monitoring their dynamic behavior is of great significance for disease prevention. How to achieve rapid and non-destructive monitoring of single cells is a major issue that needs to be solved urgently. As an emerging technology, nanopores have been proven to enable non-destructive and label-free detection of single cells. The structural properties of nanopores enable a high degree of sensitivity and accuracy during analysis. In this article, we summarize and classify the different types of solid-state nanopores that can be used for single-cell detection and illustrate their specific applications depending on the size of the analyte. In addition, their research progress in material transport and microenvironment monitoring is also highlighted. Finally, a brief summary of existing research challenges and future trends in nanopore single-cell analysis is tentatively provided.

Electrochemical Nanopipette Sensor for In Vitro/In Vivo Detection of Cu2+ Ions

In vitro/in vivo detection of copper ions is a challenging task but one which is important in the development of new approaches to the diagnosis and treatment of cancer and hereditary diseases such as Alzheimer's, Wilson's, etc. In this paper, we present a nanopipette sensor capable of measuring Cu2+ ions with a linear range from 0.1 to 10 μM in vitro and in vivo. Using the gold-modified nanopipette sensor with a copper chelating ligand, we evaluated the accumulation ability of the liposomal form of an anticancer Cu-containing complex at three levels of biological organization. First, we detected Cu2+ ions in a single cell model of human breast adenocarcinoma MCF-7 and in murine melanoma B16 cells. The insertion of the nanoelectrode did not result in leakage of the cell membrane. We then evaluated the distribution of the Cu-complex in MCF-7 tumor spheroids and found that the diffusion-limited accumulation was a function of the depth, typical for 3D culture. Finally, we demonstrated the use of the sensor for Cu2+ ion detection in the brain of an APP/PS1 transgenic mouse model of Alzheimer's disease and tumor-bearing mice in response to injection (2 mg kg-1) of the liposomal form of the anticancer Cu-containing complex. Enhanced stability and selectivity, as well as distinct copper oxidation peaks, confirmed that the developed sensor is a promising tool for testing various types of biological systems. In summary, this research has demonstrated a minimally invasive electrochemical technique with high temporal resolution that can be used for the study of metabolism of copper or copper-based drugs in vitro and in vivo.

In situ monitoring of ROS secretion from single cells with a dual-nanopore biosensor

We report here a dual-nanopore biosensor based on modulation of surface charge density coupled with a microwell array chip for in situ monitoring of ROS secretion from single MCF-7 cells.

Triggering "signal-on" photoelectrochemical responses by heterojunction transition for selective detection of copper(II) based on Pd/MoS2@g-C3N4 nanocomposites

Controlling the concentration of copper(II) in aquatic systems is of importance for human health. Numerous traditional technologies to detect Cu2+ may encounter with limitations, such as high signal background and complicated operation. Herein, a highly selective photoelectrochemical (PEC) sensor is proposed for the "signal-on" detection of Cu2+ employing g-C3N4 nanosheets with MoS2 and Pd quantum dots deposited (Pd/MoS2@g-C3N4). Pd/MoS2@g-C3N4 could present the enhanced photocurrents of specific responses to Cu2+ under light irradiation. MoS2 quantum dots on the sensor are agglomerated into MoS2 bulk during sensing Cu2+, forming an efficient Z-scheme heterojunction. The heterojunction transition induced photoelectrons transferring from the bulk MoS2 to g-C3N4, resulting in "signal-on" PEC responses. Such Z-scheme heterojunction has conquered the traditional heterojunction towards "signal-on" mechanism, that was further verified by band structure measurements and DMPO spin trapping ESR analysis. Photocurrent intensities increased gradually with the addition of incremental Cu2+ concentrations, achieving a detection limit of 0.21 μM and a broad linear interval range from 1 μM to 1 mM with high selectivity and stability. This work may open a new door towards the in situ construction of g-C3N4-based Z-scheme heterojunctions for the signal-on PEC sensing platform, providing wide applications in environmental monitoring and food safety.

Glass Nanopipette-Based Plasmonic SERS Platform for Single-Cell MicroRNA-21 Sensing during Apoptosis

As one of the most widely distributed microRNAs, microRNA-21 (miRNA-21) significantly regulates target genes' expression levels and participates in many cellular and intercellular activities, and its abnormal expression is always related to some diseases, especially cancer. Hence, detecting miRNA-21, as a biomarker, at the single-cell level helps us to reveal cell heterogeneity and expression level variation during the state change of cells. In this study, we constructed a gold nanoparticles nanomembrane (AuNPs-NM)-modified plasmonic glass nanopipette (P-nanopipette) surface-enhanced Raman scattering (SERS) sensing platform to sensitively detect content variation of the intracellular miRNA-21 during the electrostimulus (ES)-induced apoptosis process. The cytoplasm-located miRNA-21 was first extracted by using the extraction DNA (HP1)-modified P-nanopipette through a hybridization chain reaction (HCR). The nanopipette was then incubated with a labeling DNA (HP2) and reporter 4-MBA-modified Raman tag. The Raman signal (collected from the tip area near the orifice within 1 μm) showed a good response to the content variation of intracellular miRNA-21 under ES, and the proposed single-cell SERS detection platform provides a simple way to study intracellular substance change and evaluate cancer treatment outcomes.

Stochastic Sensing of Dynamic Interactions and Chemical Reactions with Nanopores/Nanochannels

Nanopore sensing technology is an emerging analysis method with the advantages of simple operation, high sensitivity, fast output and being label free, and it is widely used in protein analysis, gene sequencing, biomarker detection, and other fields. The confined space of the nanopore provides a place for dynamic interactions and chemical reactions between substances. The use of nanopore sensing technology to track these processes in real time is helpful to understand the interaction/reaction mechanism at the single-molecule level. According to nanopore materials, we summarize the development of biological nanopores and solid-state nanopores/nanochannels in the stochastic sensing of dynamic interactions and chemical reactions. The goal of this paper is to stimulate the interest of researchers and promote the development of this field.

Recent Advances in Nanopore Technology for Copper Detection and Their Potential Applications

Recently, nanopore technology has emerged as a promising technique for the rapid, sensitive, and selective detection of various analytes. In particular, the use of nanopores for the detection of copper ions has attracted considerable attention due to their high sensitivity and selectivity. This review discusses the principles of nanopore technology and its advantages over conventional techniques for copper detection. It covers the different types of nanopores used for copper detection, including biological and synthetic nanopores, and the various mechanisms used to detect copper ions. Furthermore, this review provides an overview of the recent advancements in nanopore technology for copper detection, including the development of new nanopore materials, improvements in signal amplification, and the integration of nanopore technology with other analytical methods for enhanced detection sensitivity and accuracy. Finally, we summarize the extensive applications, current challenges, and future perspectives of using nanopore technology for copper detection, highlighting the need for further research in the field to optimize the performance and applicability of the technique.