Zwitterionic Polymers Coating Antibiofouling Photoelectrochemical Aptasensor for In Vivo Antibiotic Metabolism Monitoring and Tracking

Zwitterionic polymers grafting of metal organic framework encapsulated boronic acid carbon dots as antibiofouling fluorescent probe for baicalin monitoring

The sensitivity and accuracy of fluorescence probes for biological samples are affected by not only interfering molecule compounds but also the nonspecific adsorption of proteins and other macromolecules. Herein, fluorescence probe based on zwitterionic sulfobetaine methacrylate polymer (PSBMA) as an antibiofouling layer and amino boric acid carbon dots encapsulated in the metal-organic framework UiO-66-NH2 (UiO-66-NH2/BN-CDs) as a target recognition site was designed for the detection of baicalin (BAI). Owing to the introduction of BN-CDs into UiO-66-NH2 with high specific surface area, the prepared UiO-66-NH2/BN-CDs@PSBMA probe exhibited a high adsorption capacity of 78.9 mg g-1, while presented fluorescence enhancing and superior fluorescence selectivity to BAI at excitation and emission wavelengths of 400 and 425 nm, respectively. Connecting PSBMA with good hydrophilicity to UiO-66-NH2, resulted in an anti-protein capacity of over 96.3 %, effectively inhibiting protein interference with the fluorescence signal. By virtue of its good antibiofouling and recognizing capacities, the fluorescence probe exhibited a satisfactory detection range of 10-80 nmol L-1, with a fairly low detection limit of 0.0064 μmol L-1. Using the method to detect BAI in Goji berry, Sophora and Yinhuang oral solution, demonstrating its potential for the accurate and quantitative detection of BAI in complex biological samples.

Nanozyme-catalyzed and zwitterion-modified swabs based for the detection of Listeria monocytogenes in complex matrices

In recent years, nanozymes have been widely used in the field of biosensing and food safety testing due to their advantages of low cost, high stability, easy modification and adjustable catalytic activity. However, how to reduce the signal interference generated by reducing substances, macromolecules and colored substances in the food matrix in nanozymes-based colorimetric sensing is still a major challenge. In this paper, using Listeria monocytogenes as a model analyte, sodium sulfonyl methacrylate (SBMA) polymers were modified onto cotton swabs by photothermal polymerization and combined with Listeria monocytogenes-specific aptamer (Apt1) to prepare swabs that can specifically capture and isolate Listeria monocytogenes from complex matrices (SBMA/Apt1 cotton swab). In addition, in combination with the inhibitory effect of the aptamer (Apt2) on the oxidase activity of Mn3O4 NPs, a colorimetric biosensor based on nanozymes that can quantitatively, sensitively, and specifically identify Listeria monocytogenes in food products was constructed. The results showed that the colorimetric signal of the method was linear with the concentration of Listeria monocytogenes in the range of 2.83-2.83 × 105 CFU/mL, and the limit of detection was 2.64 CFU/mL, which can be used for the detection of Listeria monocytogenes in complex environments and food samples.

Cascading CRISPR/Cas and Nanozyme for Enhanced Organic Photoelectrochemical Transistor Detection with Triple Signal Amplification

Innovative signal amplification and transduction play pivotal roles in bioanalysis. Herein, cascading CRISPR/Cas and the nanozyme are integrated with electronic amplification in an organic photoelectrochemical transistor (OPECT) to enable triple signal amplification, which is exemplified by the miRNA-triggered CRISPR/Cas13a system and polyoxometalate nanozyme for OPECT detection of miRNA-21. The CRISPR/Cas13a-enabled release of glucose oxidase could synergize with peroxidase-like SiW12 to induce catalytic precipitation on the photogate, inhibiting the interfacial mass transfer and thus the significant suppression of the channel current. The as-developed OPECT sensor demonstrates good sensitivity and selectivity for miRNA-21 detection, with a linear range from 1 fM to 10 nM and an ultralow detection limit of 0.53 fM. This study features the integration of bio- and nanoenzyme cascade and electronic triple signal amplification for OPECT detection.

A bimetallic peroxidase-mimicking nanozyme with antifouling property for construction of sensor array to identify phosphoproteins and diagnose cancers

Protein phosphorylation is a significant post-translational modification that plays a decisive role in the occurrence and development of diseases. However, the rapid and accurate identification of phosphoproteins remains challenging. Herein, a high-throughput sensor array has been constructed based on a magnetic bimetallic nanozyme (Fe3O4@ZNP@UiO-66) for the identification and discrimination of phosphoproteins. Attributing to the formation of Fe-Zr bimetallic dual active centers, the as-prepared Fe3O4@ZNP@UiO-66 exhibits enhanced peroxidase-mimicking catalytic activity, which promotes the electron transfer from Zr center to Fe(II)/Fe(III). The catalytic activity of Fe3O4@ZNP@UiO-66 can be selectively inhibited by phosphoproteins due to the strong interaction between phosphate groups and Zr centers, as well as the ultra-robust antifouling capability of zwitterionic dopamine nanoparticle (ZNP). Considering the diverse binding affinities between various proteins with the nanozyme, the catalytic activity of Fe3O4@ZNP@UiO-66 can be changed to various degree, leading to the different absorption responses at 420 nm in the hydrogen peroxide (H2O2) - 2, 2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) system. By simply extracting different absorbance intensities at various time points, a sensor array based on reaction kinetics for the discrimination of phosphoproteins from other proteins is constructed through linear discriminant analysis (LDA). Besides, the quantitative determination of phosphoproteins and identification of protein mixtures have been realized. Further, based on the differential level of phosphoproteins in cells, the differentiation of cancer cells from normal cells can also be implemented by utilizing the proposed sensor array, showing great potential in disease diagnosis.

CuInS2/Red Phosphorus Nanosheet Interleaved Heterostructures with Improved Interfacial Charge Transfer for Photoelectrochemical Aptasensing

Accelerating the migration of interfacial carriers in heterojunctions is crucial for achieving highly sensitive photoelectrochemical (PEC) sensing. In this study, we developed three-dimensional (3D)/two-dimensional (2D) CuInS2/red phosphorus nanosheet (CuInS2/RP NS) n-n heterojunction functional materials with enhanced interfacial charge transfer capabilities for PEC sensing. The 3D CuInS2 serves as a conductive layer, providing excellent electronic conductivity and superior electron absorption and transport properties. In contrast, the ultrathin RP NS acts as a transport layer that enhances carrier mobility. The 3D/2D heterojunction ensures a large interface contact surface, shortening the carrier transport distance. A well-aligned band position generates a substantial built-in electric field, providing a significant driving force for efficient carrier separation and migration, thereby improving response sensitivity. A PEC aptamer sensor was constructed based on the synthesized heterostructure for ciprofloxacin detection. The detection limit of the CuInS2/RP NS aptamer sensor for ciprofloxacin is 2.03 × 10-15 mg·mL-1, with a linear range from 1.0 × 10-14 to 1.0 × 10-5 mg·mL-1. This work presents a strategy for enhancing the photoelectric response by modulating the interface structure of heterojunctions, thereby opening new prospects for the application of highly sensitive PEC sensors in antibiotic detection.

Polyaromatic Hydrocarbon-Functionalized 2D MXene-Based 3D Porous Antifouling Nanocomposite with Long Shelf Life for High-Performance Electrochemical Immunosensor Applications

Affinity-based electrochemical (AEC) biosensors have gained more attention in the field of point-of-care management. However, AEC sensing is hampered by biofouling of the electrode surface and degradation of the antifouling material. Therefore, a breakthrough in antifouling nanomaterials is crucial for the fabrication of reliable AEC biosensors. Herein, for the first time, we propose 1-pyrenebutyric acid-functionalized MXene to develop an antifouling nanocomposite to resist biofouling in the immunosensors. The nanocomposite consisted of a 3D porous network of bovine serum albumin cross-linked with glutaraldehyde with functionalized MXene as conductive nanofillers, where the inherited oxidation resistance property of functionalized MXene improved the electrochemical lifetime of the nanocomposite. On the other hand, the size-extruded porous structure of the nanocomposite inhibited the biofouling activity on the electrode surface for up to 90 days in real samples. As a proof of concept, the antifouling nanocomposite was utilized to fabricate a multiplexed immunosensor for the detection of C-reactive protein (CRP) and ferritin biomarkers. The fabricated sensor showed good selectivity over time and an excellent limit of detection for CRP and ferritin of 6.2 and 4.2 pg/mL, respectively. This research successfully demonstrated that functionalized MXene-based antifouling nanocomposites have great potential to develop high-performance and low-cost immunosensors.

High-Throughput Multitarget Molecular Detection in an Automatic Light-Addressable Photoelectrochemical Sensing Platform

Successively emerged high-throughput multitarget molecular detection methods bring significant development tides in chemical, biological, and environmental fields. However, several persistent challenges of intricate sample preparation, expensive instruments, and tedious and skilled operations still need to be further addressed. Here, we propose an automatic light-addressable photoelectrochemical (ALA-PEC) sensing platform for sensitive and selective detection of multitarget molecules. With Au nanoparticle-decorated TiO2 nanotube photonic crystals (Au-TiO2 NTPCs) as a photoelectrode and 8 kinds of antibiotics as target molecules, the ALA-PEC sensing system implements automatic detection of multimolecules in a short time with high sensitivity and good selectivity. Random samples with different amounts of antibiotics have been well-distinguished in the ALA-PEC system, and both the chemical components and concentrations have been well-illustrated in a pattern recognition model. It is worth noting that 8 samples are not the limit of the ALA-PEC sensing platform, which can be easily expanded to more complex detection arrays based on practical needs. The emerging ALA-PEC sensing platform provides a new solution for rapid screening and detection of multitarget and high-throughput substances and potentially brings the automatic, portable, sensitive, high-throughput, and cost-effective detection technique to an entire new realm.

An antifouling electrochemical aptasensor based on a polydopamine-polyzwitterion copolymer for tetracycline analysis

Matrix interference resulting from the nonspecific adsorption of non-target components, particularly proteins (fouling), onto sensor surfaces poses a persistent challenge in electrochemical detection of food hazards. The development of antifouling sensor surfaces presents a viable approach to mitigate nonspecific adsorption. In this study, a novel antifouling electrochemical aptasensor, utilizing a zwitterionic polymer, was developed for the sensitive, accurate, and selective detection of tetracycline (TC) in milk. This sensor employs a poly (dopamine)-poly (sulfobetaine methacrylate) (PDA-PSBMA) antifouling copolymer, which is synthesized through an in-situ initiated copolymerization of dopamine on the sensor's surface. Subsequently, the thiol-containing aptamers were immobilized onto the PDA-PSBMA coating through a Michael addition reaction with the poly(dopamine). The resulting antifouling electrochemical aptasensor exhibited robust antifouling performance in various single protein solutions and diluted milk samples, coupled with sensitive and selective recognition of TC. The sensor demonstrated a broad linear response range of 0.1-1000.0 ng mL-1 and a low limit of detection (LOD) of 68.0 pg mL-1. The antifouling electrochemical aptasensor proved effective in assaying TC in diluted milk, with recoveries ranging from 100.0 % to 104.4 %, eliminating the need for additional pretreatments due to its exceptional resistance to nonspecific adhesion.

Enzymatic Galvanic Redox Potentiometry for In Vivo Biosensing

Redox potentiometry has emerged as a new platform for in vivo sensing, with improved neuronal compatibility and strong tolerance against sensitivity variation caused by protein fouling. Although enzymes show great possibilities in the fabrication of selective redox potentiometry, the fabrication of an enzyme electrode to output open-circuit voltage (EOC) with fast response remains challenging. Herein, we report a concept of novel enzymatic galvanic redox potentiometry (GRP) with improved time response coupling the merits of the high selectivity of enzyme electrodes with the excellent biocompatibility and reliability of GRP sensors. With a glucose biosensor as an illustration, we use flavin adenine dinucleotide-dependent glucose dehydrogenase as the recognition element and carbon black as the potential relay station to improve the response time. We find that the enzymatic GRP biosensor rapidly responds to glucose with a good linear relationship between EOC and the logarithm of glucose concentration within a range from 100 μM to 2.65 mM. The GRP biosensor shows high selectivity over O2 and coexisting neurochemicals, good reversibility, and sensitivity and can in vivo monitor glucose dynamics in rat brain. We believe that this study will pave a new platform for the in vivo potentiometric biosensing of chemical events with high reliability.

Oxygen Vacancies-Induced Antifouling Photoelectrochemical Aptasensor for Highly Sensitive and Selective Determination of α-Fetoprotein

Accurate measurement of cancer markers in urine is a convenient method for tumor monitoring. However, the concentration of cancer markers in urine is so low that it is difficult to achieve their measurement. Photoelectrochemical (PEC) sensors are a promising technology to realize the detection of trace cancer markers due to their high sensitivity. Currently, the interference of nonspecific biomolecules in urine is the main reason affecting the high sensitivity and selectivity of PEC sensors in detecting cancer markers. In this work, a strategy of oxygen vacancy (OV) modulation is proposed to construct a fouling-resistant PEC aptamer sensing platform for the detection of α-fetoprotein (AFP), a liver cancer marker. The introduction of OVs induces the formation of intermediate localized states in the photoelectric material, which not only facilitates the separation of photogenerated carriers but also leads to the redshift of the light absorption edge. More importantly, OVs with positive electrical properties can be employed to modify the antifouling layer (C-PEG) with negatively charged groups through an electrostatic interaction. The synergistic effect of OVs, antifouling layer, and aptamer resulted in a TiO2/OVs/C-PEG-based PEC sensor achieves a wide linear range from 1 pg/mL to 100 ng/mL and a low detection limit of 0.3 pg/mL for AFP. In addition, the sensor successfully realized the determination of AFP in urine samples and accurately differentiated between normal people and liver cancer patients in the early and advanced stages. This project is of great significance in advancing the application of photoelectrochemical bioanalytical technology to achieve the detection of cancer markers in urine by investigating the construction of an OVs-regulated fouling-resistant sensing interface.

Engineered aptamers for molecular imaging

Molecular imaging, including quantification and molecular interaction studies, plays a crucial role in visualizing and analysing molecular events occurring within cells or organisms, thus facilitating the understanding of biological processes. Moreover, molecular imaging offers promising applications for early disease diagnosis and therapeutic evaluation. Aptamers are oligonucleotides that can recognize targets with a high affinity and specificity by folding themselves into various three-dimensional structures, thus serving as ideal molecular recognition elements in molecular imaging. This review summarizes the commonly employed aptamers in molecular imaging and outlines the prevalent design approaches for their applications. Furthermore, it highlights the successful application of aptamers to a wide range of targets and imaging modalities. Finally, the review concludes with a forward-looking perspective on future advancements in aptamer-based molecular imaging.

Photoelectrochemical aptasensing of lincomycin based on a AgI-carboxylated multiwalled carbon nanotubes-BiOI Z-scheme heterojunction

Lincomycin (LIN) is a common antibiotic that is widely used in animal husbandry and other fields, and the residual problem caused by its abuse has attracted widespread attention. Herein, a novel AgI-carboxylated multiwalled carbon nanotubes (cMWCNT)-BiOI Z-scheme heterojunction material was synthesized via a one-pot hydrothermal method, modified on a fluorine-doped tin oxide (FTO) electrode surface, and used for detecting LIN. The photocurrent on the AgI-cMWCNT-BiOI/FTO photoelectrode is 4.6 times that on the control AgI-BiOI/FTO photoelectrode. An amino-functionalized LIN aptamer was fixed on the AgI-cMWCNT-BiOI/FTO photoelectrode by the cross-linking reaction between chitosan and glutaraldehyde, and then Ru(NH3)63+ was electrostatically attached to the LIN aptamer to increase the photocurrent response to the LIN binding. When LIN binds competitively with Ru(NH3)63+ to the aptamer, the photocurrent signal can be quantitatively decreased. Under optimized conditions, the anodic photocurrent at 0 V vs KCl-saturated calomel electrode in 0.1 M phosphate buffer (pH 7.0) containing 0.100 M ascorbic acid was linear with the common logarithm of LIN concentration from 10.0 pM to 500 nM, with a limit of detection of 2.8 pM (S/N = 3). Satisfactory recovery results were obtained in the analysis of cow milk samples.

Carbon Nitride-Based Heterojunction Photoelectrodes with Modulable Charge-Transfer Pathways toward Selective Biosensing

Photoelectrochemical (PEC) sensing enables the rapid, accurate, and highly sensitive detection of biologically important chemicals. However, achieving high selectivity without external biological elements remains a challenge because the PEC reactions inherently have poor selectivity. Herein, we report a strategy to address this problem by regulating the charge-transfer pathways using polymeric carbon nitride (pCN)-based heterojunction photoelectrodes. Interestingly, because of redox reactions at different semiconductor/electrolyte interfaces with specific charge-transfer pathways, each analyte demonstrated a unique combination of photocurrent-change polarity. Based on this principle, a pCN-based PEC sensor for the highly selective sensing of ascorbic acid in serum against typical interferences, such as dopamine, glutathione, epinephrine, and citric acid was successfully developed. This study sheds light on a general PEC sensing strategy with high selectivity without biorecognition units by engineering charge-transfer pathways in heterojunctions on photoelectrodes.

Enhancement of the Peroxidase Activity of g-C3N4 with Different Morphologies for Simultaneous Detection of Multiple Antibiotics

The classes and forms of antibiotics directly determine their ecotoxicity and environmental chemical behavior, and developing a sensor array for simultaneous and in situ detection of antibiotics is highly anticipated. In this study, different morphologies of g-C3N4 with different fluorescence properties and peroxidase activity were prepared by regulating the degree of interlayer stacking and planar connectivity. Subsequently, in order to enhance its enzyme activity and amplify the differences in response signals to different antibiotics, three morphologies of g-C3N4/MIL-101(Fe) were prepared by in situ growth of equivalent amounts of MIL-101(Fe) on g-C3N4, respectively. The sensor array constructed based on the cross-response signals between g-C3N4/MIL-101(Fe) and antibiotics not only realized the simultaneous detection of quinolones, furans, tetracyclines, and lincomamides but also could efficiently identify their seven different forms. In the range of 0.2-0.8 ppm, the minimum detection limit for antibiotics was 12 ppb. In addition, the recovery experiments of multicomponent-mixed antibiotics in environmental samples show that the recovery rate remained at 91.42-107.59%, confirming the reliability and practicality of the sensor array. This study not only revealed the influence of crystal morphology regulation on the optical properties and enzyme activities of nanozymes, but also provided support for tracing, ecological remediation, and in situ environmental chemical behavior research of antibiotics.