Atomic Dispersion of Zn2+ on N-Doped Carbon Materials: From Non-Activity to High Activity for Catalyzing Luminol-H2O2 Chemiluminescence

Controlled-Release Electrochemiluminescence Biosensor with Strong Self-On Effect by a Multiple Signal Amplification Strategy for Trace Detection of Prostate-Specific Antigen

The enhancement of sensitivity in biological analysis detection can reduce the probability of false positives of the biosensor. In this work, a novel self-on controlled-release electrochemiluminescence (CRE) biosensor was designed by multiple signal amplification and framework-enhanced stability strategies. As a result, the changes of the ECL signal were enhanced before and after the controlled-release process, achieving sensitive detection of prostate-specific antigen (PSA). Specifically, for one thing, Fe3O4@CeO2-NH2 with two paths for enhancing the generation of coreactant radicals was used as the coreaction accelerator to boost ECL performance. For another, due to the framework stability, zeolitic imidazolate framework-8-NH2 (ZIF-8-NH2) was combined with luminol to make the ECL signal more stable. Based on these strategies, the constructed CRE biosensor showed a strong self-on effect in the presence of PSA and high sensitivity in a series of tests. The detection range and limit of detection (LOD) were 5 fg/mL to 10 ng/mL and 2.8 fg/mL (S/N = 3), respectively, providing a feasible approach for clinical detection of PSA.

Quantification strategy of absolute chemiluminescence efficiency for systems of luminol with hydrogen peroxide

An important feature to be determined in mechanistic studies on chemiluminescence (CL) is its quantum efficiency, which can give significant chemical reaction information on the influence of the reactant structures and reaction conditions. However, most of the previous quantitative measurements of luminescence and quantum efficiencies are complex and incomplete. To overcome the inconvenience and underestimated quantum efficiency in each measurement, we report a simple and highly effective strategy to determine the absolute CL quantum efficiencies for three systems of luminol with hydrogen peroxide by means of a spectrometer along with an integrating sphere. The integrating sphere facilitated collection of all the emitted light and then transferred it to the spectrometer via an optical fiber proportionally. The CL quantum efficiency was determined by taking the ratio of total photons generated in the reaction system to the number of the limiting reactant molecules consumed. Absolute CL efficiencies of three luminol-H2O2 reaction systems with varied reactant concentrations or coreactants were found to be 37 %, 7.0 % and 6.6 % in a time course, which are much higher than those previously reported values of 1.0-1.3 %. Due to our complete photon collection design, a higher absolute CL efficiency can be realized. Furthermore, spooling CL spectra also provided a powerful visualization tool to observe the real-time CL evolution and devolution, allowing the study on kinetics of CL reaction systems. The above investigations are anticipated to promote further development of CL methodologies and their applications.

Glucose oxidation induced pH stimuli response controlled release electrochemiluminescence biosensor for ultrasensitive detection of CYFRA 21-1

Herein, a self on electrochemiluminescence (ECL) biosensor was constructed by pH stimuli response controlled release strategy, in which SiO2-PEI as the carrier, BSA/luminol-Ab2 as the encapsulated substance, gold nanoparticles (Au NPs) as the blocking cap, glucose as the inducer. In addition, CeO2-Au was used as catalyst, which generated more O2•- to increase the ECL signal. Under the action of voltage, the glucose was oxidized to gluconic acid, which induced the pH to decrease accordingly. Therefore, Au NPs were stimulated to fall from the surface of SiO2-PEI, releasing the BSA/luminol-Ab2 to realize self on mode. With such design, the constructed self on ECL biosensor owned an ultrasensitive detection capacity of CYFRA 21-1, showing an excellent linear relationship in the range of 0.001-100000 ng/L and 0.4 fg/mL low limit of detection (LOD). It provided an innovative idea for the biosensor construction to clinical detection of lung cancer.

Preparation of Co dual atomic site catalysts loaded on defect-engineered MOFs material with superb chemiluminescent enhancement effect for sensitive detection of bacteria

BACKGROUND

Dual atomic site catalysts (DASCs) have aroused extensive interest in analytical chemistry on account of the superb catalytic activity caused by the highly-exposed active centers and synergistic effect of adjacent active centers. The reported protocols for preparing DASCs usually involve harsh conditions such as acid/base etching and high-temperature calcination, leading to unfavorable water dispersity and restricted application. It is crucial to develop DASCs with satisfactory water dispersity, improved stability, and mild preparation procedures to facilitate their application as signal probes in analytical chemistry.

RESULTS

Formic acid was adopted as a modulator for preparing MOF-808 with abundant defective sites, which was used as the carrier for implanting Co atoms. Co DASCs with a special coordination structure of Co2-O10 and a high loading efficiency of 11.1 wt% were prepared with a mild solvothermal protocol. The resultant Co DASCs can significantly accelerate decay of H2O2 for forming numerous reactive oxygen radicals and boost chemiluminescent (CL) signal. Co DASCs at 1.0 μg mL-1 can enhance the CL signal of luminol-H2O2 system by about 5800 times. Thanks to their satisfactory water dispersity and excellent CL enhancement performance, they were used as ultra-sensitive CL signal probes for monitoring methicillin-resistant Staphylococcus aureus. The method shows a detection range of 102-107 CFU mL-1 and a detection limit of 47 CFU mL-1. Antibiotic susceptibility test was performed with the established CL method to prove its practicality.

SIGNIFICANCE

The water dispersible Co DASCs prepared with facile and mild solvothermal protocol exhibit prominent peroxidase-like activity and can promote the production of reactive oxygen radicals for boosting CL signal. Therefore, this study paves an avenue for implanting DASCs in defect-engineered carrier to prepare signal probes suitable for development of ultra-sensitive CL analytical methods.

Carbon Vacancy-Enhanced Activity of Fe-N-C Single Atom Catalysts toward Luminol Chemiluminescence in the Absence of H2O2

The classic luminol-H2O2 chemiluminescence (CL) systems suffer from easy self-decomposition of H2O2 at room temperature, hindering the practical applications of the luminol-H2O2 CL system. In this work, unexpectedly, we found that the carbon vacancy-modified Fe-N-C single atom catalysts (VC-Fe-N-C SACs) can directly trigger a luminol solution to generate strong CL emission in the absence of H2O2. The Fe-based SACs were prepared through the conventional pyrolysis of zeolitic imidazolate frameworks. The massive carbon vacancies were readily introduced into Fe-N-C SACs through a tannic acid-etching process. Carbon vacancy significantly enhanced the catalytic activity of Fe-N-C SACs on the CL reaction of luminol-dissolved oxygen. The VC-Fe-N-C SACs performed a 13.4-fold CL enhancement compared with the classic luminol-Fe2+ system. It was found that the introduction of a carbon vacancy could efficiently promote dissolved oxygen to convert to reactive oxygen species. As a proof of concept, the developed CL system was applied to detect alkaline phosphatase with a linear range of 0.005-1 U/L as well as a detection limit of 0.003 U/L. This work demonstrated that VC-Fe-N-C SAC is a highly efficient CL catalyst that can promote the analytic application of the luminol CL system.

Recent advances in the synthesis and applications of single-atom nanozymes in food safety monitoring

Nanozymes are synthetic compounds with enzyme-like tunable catalytic properties. The success of nanozymes for catalytic applications can be attributed to their small dimensions, cost-effective synthesis, appreciable stability, and scalability to molecular dimensions. The emergence of single atom nanozymes (SANzymes) has opened up new possibilities in bioanalytical applications. In this regard, this review outlines enzyme-mimicking features of SANzymes for food safety applications in relation to the key variables controlling their catalytic performance. The discussion is extended further to cover the applications of SANzymes for the monitoring of various compounds/biomaterials of significance with respect to food safety (e.g., pesticides, veterinary drug residues, foodborne pathogenic bacteria, mycotoxins/bacterial endotoxin, antioxidant residues, hydrogen peroxide residues, and heavy metal ions). Furthermore, the performance of SANzymes is evaluated in terms of various performance metrics such as limit of detection (LOD), linear dynamic range, and figure of merit (FoM). The challenges and future road map for the applications of SANzymes are also addressed along with their upscaling in the area of food safety.