Multifunctional Nanoprobe-Amplified Enzyme-Linked Immunosorbent Assay on Capillary: A Universal Platform for Simple, Rapid, and Ultrasensitive Dual-Mode Pathogen Detection

Developing portable and controllable fluorescence capillary imprinted sensor for visual detection Crohn's disease biomarkers

Simultaneous detection of multiple biomarker levels is essential to improve the accuracy of early diagnosis. Introducing capillary will simplify procedure, less time, and reduce reagent consumption for point-of-care testing of biomarkers. Here, we developed a portable and controllable smartphone-integrated fluorescence capillary imprinted sensing platform for the accuracy visual detection of Crohn's disease biomarkers (lysozyme, Fe3+) using single-excitation/double-signal detection. A novel controllable capillary coating strategy was developed by static gas-driven coating method for synthesis uniform fluorescence capillary imprinted sensor (Si-CD/g-CdTe@MIP capillary sensor). When Fe3+ and lysozyme were added, the fluorescence intensity of Si-CD/g-CdTe@MIP capillary sensor was quenched at 426 nm and enhanced at 546 nm, respectively. This Si-CD/g-CdTe@MIP capillary sensor has high sensitivity and selectivity for quantification lysozyme and Fe3+ simultaneously with the detection limit of 0.098 nM and 0.20 nM, respectively. In addition, the smartphone-integrated Si-CD/g-CdTe@MIP capillary sensor was applied for the intelligent detection of lysozyme and Fe3+, in which the detection limit was calculated as 0.32 nM and 0.65 nM. The smartphone-integrated visual Si-CD/g-CdTe@MIP capillary sensor realized ultrasensitive microanalysis (18 μL/time) of biomarkers in health man and Crohn 's patients, providing a novel strategy for early diagnosis of Crohn 's disease.

Molecular-Sieving Label-Free Surface-Enhanced Raman Spectroscopy for Sensitive Detection of Trace Small-Molecule Biomarkers in Clinical Samples

Small-molecule biomarkers are ubiquitous in biological fluids with pathological implications, but major challenges persist in their quantitative analysis directly in complex clinical samples. Herein, a molecular-sieving label-free surface-enhanced Raman spectroscopy (SERS) biosensor is reported for selective quantitative analysis of trace small-molecule trimetazidine (TMZ) in clinical samples. Our biosensor is fabricated by decorating a superhydrophobic monolayer of microporous metal-organic frameworks (MOF) shell-coated Au nanostar nanoparticles on a silicon substrate. The design strategy principally combines the hydrophobic surface-enabled physical confinement and preconcentration, MOF-assisted molecular enrichment and sieving of small molecules, and sensitive SERS detection. Our biosensor utilizes such a "molecular confinement-and-sieving" strategy to achieve a five orders-of-magnitude dynamic detection range and a limit of detection of ≈0.5 nM for TMZ detection in either urine or whole blood. We further demonstrate the applicability of our biosensing platform for longitudinal label-free SERS detection of the TMZ level directly in clinical samples in a mouse model.

SERS Platform for Integrated Enrichment, Isolation, and Identification of Multiple Respiratory Viruses in a Single Assay Using 3D Stereoscopic SERS Tags and Flocked Swabs

Influenza (flu) and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) exhibit similar clinical symptoms, complicating the diagnosis and clinical management of these critical respiratory infections. Thus, there is an urgent need for rapid on-site detection technologies that can simultaneously detect SARS-CoV-2 and influenza A viruses. Here, we have developed the first platform that combines in situ sampling with immune swabs and multichannel surface-enhanced Raman spectroscopy (SERS) for simultaneous screening of these two respiratory viruses in a single assay. A seed-mediated growth method was used to assemble a number of silver spheres on the surface of Fe3O4@SiO2 spheres, which not only creates extensive Raman hotspots but also provides numerous sites for Raman signaling molecules, enhancing the sensing sensitivity. Integrating two specific Raman signaling molecules into the nanospheres allows for the parallel detection of both viruses, improving the efficiency of SERS signal read-out. Rapid quantitative screening of both SARS-CoV-2 and H1N1 is achievable within 15 min, with detection limits of 7.76, and 8.13 pg·mL-1 for their respective target proteins. The platform demonstrated excellent performance in testing and analyzing 98 clinical samples (SARS-CoV-2:50; influenza A:48), achieving sensitivities of 88.00, and 95.83% for SARS-CoV-2 and influenza A, respectively. Pearson's correlation analysis revealed a significant correlation with the clinical CT values (P < 0.0001), underscoring the great potential of this platform for the early, rapid, and simultaneous diagnostic discrimination of multiple pathogens.

The Impact of Surface Modifier on Magnetic Nanoparticle Properties and Their Application in CD3+T Cell Separation

Fe3O4 nanoparticles occupy a pivotal position in the realm of nanobiology due to their nontoxic, biocompatible, and superparamagnetic properties. This study examines the influence of surface modifiers on the properties of magnetic nanoparticles. Poly(methacrylic acid) (PMAA), poly(4-styrenesulfonic acid-co-maleic acid) sodium salt (PSSM), trisodium citrate (TSC), carboxymethylcellulose (CMC), and carboxymethylated-dextran 40 (CMD40) were introduced into a one-pot solvothermal method to synthesize magnetic nanoparticles. TEM, the 4-(bromomethyl)-6,7-dimethoxy coumarin (BMMC) absorption assay, and the Bradford method were employed to characterize the diameter, carboxyl content, and protein immobilization ability of the nanoparticles, respectively. The findings revealed that CMD40-modified magnetic nanoparticles (CMD40-MNPs) exhibited the highest carboxyl content and streptavidin (SA) immobilization content, reaching 6.5 × 10-7 mol/mg and 375 μg/mg, respectively. In contrast, CMC-modified magnetic nanoparticles displayed opposite trends. This is primarily attributed to dextran's unique molecular structure, which enhances its water solubility and biocompatibility, thereby facilitating contact with Fe3O4 nanoparticles in aqueous solutions. CMD40-MNPs possess a saturation magnetization value of 60.90 emu/g and can be collected within (60 ± 5) s using a standard magnetic separator. Cytotoxicity assays demonstrated that CMD40-MNPs are nontoxic to cells. A cell sorting strategy utilizing the binding of SA-CMD40-MNPs and biotin antihuman CD3 antibody-modified cell suspensions was employed to isolate CD3+T cells. The results indicate that the purity and efficiency of targeted CD3+T cells are 85.2% and 61.5%, respectively.

Nanoenzyme Hydrogel Film-Based Portable Point-of-Care Testing Platform for Double-Signal Visual Detection of PSA

The development of the Point-of-Care Testing (POCT) platform that combines convenience and cost-effectiveness is crucial for enabling the visual detection of disease biomarkers. In this work, a POCT platform for the sensitive in situ detection of prostate specific antigen (PSA) with dual-signal output was constructed by functionalizing the Eppendorf (EP) tube. This was achieved through the modification of aptamer hairpin probes (AHPs) on the lid of the EP tube and the assembly of a nanoenzyme hydrogel film on its inner wall. The target could trigger the release of Ag+ by AHP and subsequently activate Ag+-dependent DNAzyme (Ag-DNAzyme). This would initiate the cleavage of the DNA-Au/Pt NP hydrogel network, leading to the release of Au/Pt NPs. The released Au/Pt NPs exhibit both peroxidase (POD)-like and catalase (CAT)-like activity to produce a colorimetric response and induce liquid flow under pressure. Therefore, the target can be measured visually and quantitatively through colorimetric analysis and the measurement of total dissolved solids (TDS) using a pressure-triggered liquid flow device integrated into the platform. The designed platform is distinguished by its simplicity, specificity, cost-effectiveness, and remarkable sensitivity. It allows for the visual detection of PSA within concentration ranges of 0.5-100 ng/L (colorimetric) and 3-100 ng/L (TDS reading), boasting detection limits as low as 0.15 ng/L (colorimetric) and 0.57 ng/L (TDS reading). The strategy of target-triggered nanoenzyme release significantly enhances sensitivity and provides a guiding approach for visual biomarker detection.

Two Birds with one Stone: Dual-mode immunoassay constructed using a novel emitter ethylene glycol-induced perylene diimide and a multifunctional ANS probe

Perylene diimide (PDI) is a readily reducible electron-deficient dye that exhibits strong photoluminescent properties, providing new opportunities for synthesizing novel electrochemiluminescence (ECL) emitters. In this study, ethylene glycol (EG) was used to induce the self-assembly of PDI supramolecules for the preparation of ultrathin EG-PDI nanosheets characterized by low crystallinity and weak stacking interaction. Notably, EG-PDI integrates luminescent and catalytic functions into one device, accelerating the interfacial electron transfer and the faster charge transfer kinetics of EG-PDI with K2S2O8. Furthermore, the narrow band gap of EG-PDI facilitates its excitation at an ultra-low potential (-0.3 V). To improve the efficiency of tumor marker analysis, multifunctional Au nanostars (ANS) was introduced both as an energy acceptor of the ECL system and a probe for the photothermal system. Dual-mode immunoassay have demonstrated superior analytical performance in detecting alpha-fetoprotein (AFP), meeting the requirements of modern clinical diagnostics in resource-limited environments.

Immobilization of a broad host range phage on the peroxidase-like Fe-MOF for colorimetric determination of multiple Salmonella enterica strains in food

A broad host range phage-based nanozyme (Fe-MOF@SalmpYZU47) was prepared for colorimetric detection of multiple Salmonella enterica strains. The isolation of a broad host range phage (SalmpYZU47) capable of infecting multiple S. enterica strains was achieved. Then, it was directly immobilized onto the Fe-MOF to prepare Fe-MOF@SalmpYZU47, exhibiting peroxidase-like activity. The peroxidase-like activity can be specifically inhibited by multiple S. enterica strains, benefiting from the broad host range capture ability of Fe-MOF@SalmpYZU47. Based on it, a colorimetric detection approach was developed for S. enterica in the range from 1.0 × 102 to 1.0 × 108 CFU mL-1, achieving a low limit of detection (LOD) of 11 CFU mL-1. The Fe-MOF@SalmpYZU47 was utilized for detecting S. enterica in authentic food samples, achieving recoveries ranging from 91.88 to 105.34%. Hence, our proposed broad host range phage-based nanozyme exhibits significant potential for application in the colorimetric detection of pathogenic bacteria.

"Three-in-One" Multifunctional Hollow Nanocages with Colorimetric Photothermal Catalytic Activity for Enhancing Sensitivity in Biosensing

Immunochromatographic assays (ICAs) have been widely used in the field detection of mycotoxin contaminants. Nevertheless, the lack of multisignal readout capability and the ability of signaling tags to maintain their biological activity while efficiently loading antibodies remain a great challenge in satisfying diverse testing demands. Herein, we proposed a novel three-in-one multifunctional hollow vanadium nanomicrosphere (high brightness-catalytic-photothermal properties)-mediated triple-readout ICA (VHMS-ICA) for sensitive detection of T-2. As the key to this biosensing strategy, vanadium was used as the catalytic-photothermal characterization center, and natural polyphenols were utilized as the bridging ligands for coupling with the antibody while self-assembling with formaldehyde cross-linking into a hollow nanocage-like structure, which offers the possibility of realizing a three-signal readout strategy and improving the coupling efficiency to the antibody while preserving its biological activity. The constructed sensors showed a detection limit (LOD) of 2 pg/mL for T-2, which was about 345-fold higher than that of conventional gold nanoparticle-based ICA (0.596 ng/mL). As anticipated, the detection range of VHMS-ICA was extended about 8-fold compared with the colorimetric signal alone. Ultimately, the proposed immunosensor performed well in maize and oat samples, with satisfactory recoveries. Owing to the synergistic and complementary interactions between distinct signaling modes, the establishment of multimodal immunosensors with multifunctional tags is an efficient strategy to satisfy diversified detection demands.

Multi-modal nanoprobe-enabled biosensing platforms: a critical review

Nanomaterials show great potential for applications in biosensing due to their unique physical, chemical, and biological properties. However, the single-modal signal sensing mechanism greatly limits the development of single-modal nanoprobes and their related sensors. Multi-modal nanoprobes can realize the output of fluorescence, colorimetric, electrochemical, and magnetic signals through composite nanomaterials, which can effectively compensate for the defects of single-modal nanoprobes. Following the multi-modal nanoprobes, multi-modal biosensors break through the performance limitation of the current single-modal signal and realize multi-modal signal reading. Herein, the current status and classification of multi-modal nanoprobes are provided. Moreover, the multi-modal signal sensing mechanisms and the working principle of multi-modal biosensing platforms are discussed in detail. We also focus on the applications in pharmaceutical detection, food and environmental fields. Finally, we highlight this field's challenges and development prospects to create potential enlightenment.