Liposomes with High Refractive Index Encapsulants as Tunable Signal Amplification Tools in Surface Plasmon Resonance Spectroscopy

An X-ray activatable gold nanorod encapsulated liposome delivery system for mitochondria-targeted photodynamic therapy (PDT)

In this work, we developed a mitochondria-targeted nanomaterial for neoadjuvant X-ray-triggered photodynamic therapy of rectal cancer. Herein, we designed a biodegradable liposome incorporating a photosensitizer, verteporfin, to generate X-ray-induced reactive oxygen species, gold nanorods as radiation enhancers, and triphenylphosphonium as the mitochondrial targeting moiety. The average size of the nanocarrier was about 150 nm. Due to the synergetic effect between X-ray and a combination of verteporfin and gold nanorods, as well as precise site-targeted TPP-modified liposomal nanocarriers, our nanoconjugates generated sufficient cytotoxic singlet oxygen within the mitochondria under X-ray irradiation, triggering the loss of membrane potential and mitochondria-related apoptosis of cancer cells.

Detection of the Chilli Leaf Curl Virus Using an Attenuated Total Reflection-Mediated Localized Surface-Plasmon-Resonance-Based Optical Platform

The development of a nanoparticle-based optical platform has been presented as a biosensor for detecting target-specific plant virus DNA. The binding dynamics of gold nanoparticles has been studied on the amine-functionalized surface by the attenuated total reflection (ATR)-based evanescent wave absorption method monitoring the localized surface plasmon resonance (LSPR). The developed surface was established as a refractive index sensor by monitoring the LSPR absorption peak of gold nanoparticles. This nanoparticle-immobilized surface was explored to establish as a biosensing platform with target-specific immunoglobulin (IgG) antibody-antigen interaction. The IgG concentration-dependent variation of absorbance was correlated with the refractive index change. After successfully establishing this ATR configuration as an LSPR-based biosensor, the single-stranded DNA of the chilli leaf curl virus was detected using its complementary DNA sequence as a receptor. The limit of detection of this sensor was determined to be 1.0 μg/mL for this target viral DNA. This ATR absorption technique has enormous potential as an LSPR based nano-biosensor for the detection of other begomoviruses.

Nanoparticle Determination in Water by LED-Excited Surface Plasmon Resonance Imaging

The increasing popularity of nanoparticles in many applications has led to the fact that these persistent materials pollute our environment and threaten our health. An online sensor system for monitoring the presence of nanoparticles in fresh water would be highly desired. We propose a label-free sensor based on SPR imaging. The sensitivity was enhanced by a factor of about 100 by improving the detector by using a high-resolution camera. This revealed that the light source also needed to be improved by using LED excitation instead of a laser light source. As a receptor, different self-assembled monolayers have been screened. It can be seen that the nanoparticle receptor interaction is of a complex nature. The best system when taking sensitivity as well as reversibility into account is given by a dodecanethiol monolayer on the gold sensor surface. Lanthanide-doped nanoparticles, 29 nm in diameter and with a similar refractive index to the most common silica nanoparticles were detected in water down to 1.5 µg mL−1. The sensor can be fully regenerated within one hour without the need for any washing buffer. This sensing concept is expected to be easily adapted for the detection of nanoparticles of different size, shape, and composition, and upon miniaturization, suitable for long-term applications to monitor the quality of water.

Surface Plasmon Resonance Monitoring of Mono-Rhamnolipid Interaction with Phospholipid-Based Liposomes

The interactions of mono-rhamnolipids (mono-RLs) with model membranes were investigated through a biomimetic approach using phospholipid-based liposomes immobilized on a gold substrate and also by the multiparametric surface plasmon resonance (MP-SPR) technique. Biotinylated liposomes were bound onto an SPR gold chip surface coated with a streptavidin layer. The resulting MP-SPR signal proved the efficient binding of the liposomes. The thickness of the liposome layer calculated by modeling the MP-SPR signal was about 80 nm, which matched the average diameter of the liposomes. The mono-RL binding to the film of the phospholipid liposomes was monitored by SPR and the morphological changes of the liposome layer were assessed by modeling the SPR signal. We demonstrated the capacity of the MP-SPR technique to characterize the different steps of the liposome architecture evolution, i.e., from a monolayer of phospholipid liposomes to a single phospholipid bilayer induced by the interaction with mono-RLs. Further washing treatment with Triton X-100 detergent left a monolayer of phospholipid on the surface. As a possible practical application, our method based on a biomimetic membrane coupled to an SPR measurement proved to be a robust and sensitive analytical tool for the detection of mono-RLs with a limit of detection of 2 μg mL^-1.

Laser-induced graphene interdigitated electrodes for label-free or nanolabel-enhanced highly sensitive capacitive aptamer-based biosensors

Highly porous laser-induced graphene (LIG) is easily generated in complex electrode configurations such as interdigitated electrodes (IDEs). Here, we demonstrate that their superior capacitive response at low frequencies can be exploited in affinity biosensors using thrombin aptamers as model biorecognition elements. Of specific interest was the effect of electrode surface area on capacitance detection, and the comparison between a label-free format and enhancement strategies afforded by carboxy group bearing polymeric nanoparticles or liposomes. Electrochemical impedance spectroscopy (EIS) was used to investigate the LIG performance and optimize the biosensor design. Interestingly, the label-free strategy performed extremely well and additional labels decreased the limit of detection or increased the sensitivity only minimally. It is assumed that the highly porous nature of the LIG structures dominates the capacitive response so that labels removed from the surface have only limited influence Also, while slight performance changes can be observed for smaller vs. larger electrode structures, the performance of a LIG IDE is reasonably independent of its size. In the end, a dynamic range of 5 orders of magnitude was obtained (0.01 nM-1000 nM) with a limit of detection as low as 0.12 pM. When measured in serum, this increased to 1.3 pM. The good reproducibility (relative standard deviation (RSD), 4.90%) and repeatability (RSD, 2.59%) and good long-term stability (>7 weeks at 4 °C) prove that a LIG-based capacitance sensor is an excellent choice for affinity-based biosensor. The ease-of-production, the simplicity of modification and the superior performance even in a label-free format indicate that LIG-based biosensors should be considered in point-of-care diagnostics in the future.

Avidity-Based Affinity Enhancement Using Nanoliposome-Amplified SPR Sensing Enables Low Picomolar Detection of Biologically Active Neuregulin 1

Biomarkers serve as indicators of disease progression or therapeutic response of an medical intervention, and means for enabling a reliable and sensitive biomarker detection are therefore vital in clinical settings. Most biosensor assays require high-affinity interactions in combination with an enzyme or fluorescent tag to enable detection and frequently employ extensive washing procedures prior to signal readout. Attempts to overcome this limitation by using natural biological partners tend to be demanding, because their very low affinity is frequently not compatible with the need of reaching low limits of detection (LODs), especially for circulating biomarkers that possess short half-lives. To address these challenges, we developed a label-free surface plasmon resonance (SPR) platform for the detection of neuregulin 1 (NRG1) using ErbB4-modified liposomes offering both signal amplification and affinity enhancement via functional multivalent interactions. Through the functional avidity interaction between NRG1 and ErbB4, an LOD of 3.5 picomolar was reached, which is about 60-fold higher than traditional SPR and miniaturized immunoassays. The biosensor displays also an 8-fold higher sensitivity when compared with a single-molecule immunoassay employing the natural binding partner rather than a high-affinity antibody as one of the interaction partners. In fact, the liposome-induced avidity between NRG1 and ErbB4 offered an LOD that was comparable to that obtained using a high-affinity antibody and enabled detection of NRG1 in plasma with a LOD of 36 pM. Employing the liposome-enhanced platform in conjunction with a low-affinity biomarker receptor thus enables the assessment of the functional state of the biomarker at competitive LODs and eliminates the need for high-affinity antibodies.

Embedding Capture-Magneto-Catalytic Activity into a Nanocatalyst for the Determination of Lipid Kinase

The use of emerging nanocatalysts to investigate the activity of biocatalysts (protein enzymes, catalytic RNAs, etc.) is increasingly receiving attention from material, analytic, and biomedical scientists. Here, we have first fabricated a three-in-one nanocatalyst, the nitrilotriacetic acid (NTA)-modified magnetite nanoparticle (NTA-MNP), to develop an integrated magneto-colorimetric (MagColor) assay for lipid kinase activity so as to solve the inherent problems in a lipid kinase assay. On the basis of three integrated functions of the NTA-MNPs (capture, magnetic separation, and peroxidase activity), the catalytic activity of lipid kinase is directly converted to colorimetric signals. Therefore, the assay procedure is significantly simplified such that in one step the visual detection of lipid kinase activity is possible. Moreover, the whole system responds sensitively in the case that NTA-MNPs recognize a few numbers of the reaction sites, which efficiently initiates the chromogenic reaction of a large amount of chromogens; thus, the detection limit decreases to 6.5 ± 5.8 fM, about three orders of magnitude lower as compared to that of enzyme-linked immune-sorbent assay. So, by embedding desired functions into nanocatalysts, the assay for biocatalysts becomes easy, which may promisingly provide useful tools for biomedical and clinical research in the future.

Liposome-Enhanced Lateral-Flow Assays for Clinical Analyses

Clinical and environmental analyses frequently necessitate rapid, simple, and inexpensive point-of-care or field tests. These semiquantitative tests may be later followed up by confirmatory laboratory-based assays, but provide an initial scenario assessment important for resource mobilization and threat confinement. Lateral-flow assays (LFAs) and dip-stick assays, which are typically antibody-based and yield a visually detectable signal, provide an assay format suiting these applications extremely well. Signal generation is commonly obtained through the use of colloidal gold or latex beads, which yield a colored band either directly proportional or inversely proportional to the concentration of the analyte of interest. Here, dye-encapsulating liposomes as a highly visible alternative are discussed. The semiquantitative LFA biosensor described in this chapter relies on a sandwich immunoassay for the detection of myoglobin in whole blood. After an acute myocardial infarction (AMI) event, several cardiac markers are released into the blood, the most common of which are troponin, creatine kinase MB, C-reactive protein, and myoglobin. Due to its early release, myoglobin has value as an indicator of a recent heart attack amongst conditions which present with similar symptoms and its lack of elevation can effectively rule out a heart attack (Brogan et al., Ann Emerg Med 24:665-671, 1994). The assay described within relies on sandwich complex formation between a membrane immobilized capture monoclonal antibody against myoglobin, a detector biotinylated monoclonal antibody against a different epitope on myoglobin, and streptavidin-conjugated visible dye (sulforhodamine B)-encapsulating liposomes to allow for signal generation.

Sensitivity Tuning through Additive Heterogeneous Plasmon Coupling between 3D Assembled Plasmonic Nanoparticle and Nanocup Arrays

Plasmonic substrates have fixed sensitivity once the geometry of the structure is defined. In order to improve the sensitivity, significant research effort has been focused on designing new plasmonic structures, which involves high fabrication costs; however, a method is reported for improving sensitivity not by redesigning the structure but by simply assembling plasmonic nanoparticles (NPs) near the evanescent field of the underlying 3D plasmonic nanostructure. Here, a nanoscale Lycurgus cup array (nanoLCA) is employed as a base colorimetric plasmonic substrate and an assembly template. Compared to the nanoLCA, the NP assembled nanoLCA (NP-nanoLCA) exhibits much higher sensitivity for both bulk refractive index sensing and biotin-streptavidin binding detection. The limit of detection of the NP-nanoLCA is at least ten times smaller when detecting biotin-streptavidin conjugation. The numerical calculations confirm the importance of the additive plasmon coupling between the NPs and the nanoLCA for a denser and stronger electric field in the same 3D volumetric space. Tunable sensitivity is accomplished by controlling the number of NPs in each nanocup, or the number density of the hot spots. This simple yet scalable and cost-effective method of using additive heterogeneous plasmon coupling effects will benefit various chemical, medical, and environmental plasmon-based sensors.

Investigating non-specific binding to chemically engineered sensor surfaces using liposomes as models

Clever surface engineering strategies lead to the minimization of non-specific binding of liposomes to sensor substrates.