Achievement of Prolonged Oxygen Detection in Room-Temperature Ionic Liquids on Mechanically Polished Platinum Screen-Printed Electrodes

Aptamer-based rapid diagnosis for point-of-care application

Aptasensors have attracted considerable interest and widespread application in point-of-care testing worldwide. One of the biggest challenges of a point-of-care (POC) is the reduction of treatment time compared to central facilities that diagnose and monitor the applications. Over the past decades, biosensors have been introduced that offer more reliable, cost-effective, and accurate detection methods. Aptamer-based biosensors have unprecedented advantages over biosensors that use natural receptors such as antibodies and enzymes. In the current epidemic, point-of-care testing (POCT) is advantageous because it is easy to use, more accessible, faster to detect, and has high accuracy and sensitivity, reducing the burden of testing on healthcare systems. POCT is beneficial for daily epidemic control as well as early detection and treatment. This review provides detailed information on the various design strategies and virus detection methods using aptamer-based sensors. In addition, we discussed the importance of different aptamers and their detection principles. Aptasensors with higher sensitivity, specificity, and flexibility are critically discussed to establish simple, cost-effective, and rapid detection methods. POC-based aptasensors' diagnostic applications are classified and summarised based on infectious and infectious diseases. Finally, the design factors to be considered are outlined to meet the future of rapid POC-based sensors.

Materials for Chemical Sensing: A Comprehensive Review on the Recent Advances and Outlook Using Ionic Liquids, Metal–Organic Frameworks (MOFs), and MOF-Based Composites

The ability to measure and monitor the concentration of specific chemical and/or gaseous species (i.e., “analytes”) is the main requirement in many fields, including industrial processes, medical applications, and workplace safety management. As a consequence, several kinds of sensors have been developed in the modern era according to some practical guidelines that regard the characteristics of the active (sensing) materials on which the sensor devices are based. These characteristics include the cost-effectiveness of the materials’ manufacturing, the sensitivity to analytes, the material stability, and the possibility of exploiting them for low-cost and portable devices. Consequently, many gas sensors employ well-defined transduction methods, the most popular being the oxidation (or reduction) of the analyte in an electrochemical reactor, optical techniques, and chemiresistive responses to gas adsorption. In recent years, many of the efforts devoted to improving these methods have been directed towards the use of certain classes of specific materials. In particular, ionic liquids have been employed as electrolytes of exceptional properties for the preparation of amperometric gas sensors, while metal–organic frameworks (MOFs) are used as highly porous and reactive materials which can be employed, in pure form or as a component of MOF-based functional composites, as active materials of chemiresistive or optical sensors. Here, we report on the most recent developments relative to the use of these classes of materials in chemical sensing. We discuss the main features of these materials and the reasons why they are considered interesting in the field of chemical sensors. Subsequently, we review some of the technological and scientific results published in the span of the last six years that we consider among the most interesting and useful ones for expanding the awareness on future trends in chemical sensing. Finally, we discuss the prospects for the use of these materials and the factors involved in their possible use for new generations of sensor devices.

Membraneless Ionic Liquid Droplet Nanoprobe for Oxygen Sensing and Gas Phase Scanning Electrochemical Microscopy

A novel membraneless oxygen sensing nanoprobe was developed based on a hanging drop ionic liquid electrochemical cell. An ultrasmall (<500 nm) working electrode and small volume electrochemical cell allowed for an impressively low detection limit of ∼13 ppm and a response time less than 100 ms, which is unusually fast for an electrochemical gas sensor. The oxygen sensor was stable for hours of operation and, owing to the membraneless design, was easily regenerable when fouled. The pulled capillary form factor of the nanoprobe was found compatible with scanning probe techniques, the demonstration of which was made by application as a tip electrode in gas phase scanning electrochemical microscopy (SECM). In the SECM experiments, the oxygen nanoprobe exhibited micrometer scale spatial resolution with ease. This unique probe design developed here may potentially be engineered into versatile sensors for various volatile molecules other than oxygen, such as those pertinent to hazard analysis and biomedical diagnosis.

Reconfigurable Modular Platform for Prolonged Sensing of Toxic Gases in Particle Polluted Environments

The prolonged sensing of toxic gases in polluted particles and harsh environments is a challenging task that is also in high demand. In this work, the proof of principle of a sensitive, low-cost, and low-maintenance reconfigurable platform for filter-free and continuous ammonia (NH3) sensing in polluted environments is simulated. The platform can be modified for the detection of various toxic gases and includes three main modules: a microfluidic system for in-line continuous dust filtering; a toxic gas adsorption module; and a low-frequency microwave split-ring resonator (SRR). An inertia-based spiral microfluidic system has been designed and optimized through simulation for the in-line filtration of small particles from the intake air. Zeolite Y is selected as the adsorbent in the adsorption module. The adsorption module is a non-metallic thin tube that is filled with zeolite Y powder and precisely fixed at the drilled through-hole into the 3D microwave system. For the sensing module, a low-frequency three-dimensional (3D) split-ring resonator is proposed and optimally designed. A microwave resonator continuously monitors the permittivity of zeolite Y and can detect small permittivity alterations upon the presence of ammonia in the intake air. The microwave resonator is optimized at a frequency range of 2.5–3 GHz toward the detection of ammonia under different ammonia concentrations from 400 to 2800 ppm. The microwave simulation results show a clear contrast of around 4 MHz that shifts at 2.7 GHz for 400 ppm ammonia concentration. The results show the proof of principle of the proposed microfluidic-microwave platform for toxic gas detection.

Prudent Practices in ex situ Durability Analysis Using Cyclic Voltammetry for Platinum-based Electrocatalysts

Platinum (Pt)-based electrocatalysts are at the vanguard of research initiatives to meet activity and durability targets for promoting large-scale adoption of fuel cell vehicles. Ex situ characterization of electrocatalyst activity and durability using cyclic voltammetry (CV) has a steep learning curve. Thus, many researchers who do not receive formal training in electrochemistry are left unsure how to proceed. Herein, we identify and compile prudent practices for reliable assessment of ECSA values with examples from our research on nanoscale catalytic films formed by the self-terminating electrodeposition of Pt. Starting with a conceptual framework to understand typical features in the CV of reversible redox couples, we present prudent practices in acquiring CV data aimed at nonelectrochemists. We then highlight specific features related to ECSA computation from Pt CV. Finally, we suggest safeguards that help avoid missteps and achieve repeatable results while conducting ex situ durability tests that extend over days.

Trends in sensor development toward next-generation point-of-care testing for mercury

Mercury is one of the most common heavy metals and a major environmental pollutant that affects ecosystems. Since mercury and its compounds are toxic to humans, even at low concentrations, it is very important to monitor mercury contamination in water and foods. Although conventional mercury detection methods, including inductively coupled plasma mass spectrometry, atomic absorption spectroscopy, and gas chromatography-mass spectrometry, exhibit excellent sensitivity and accuracy, they require operation by an expert in a sophisticated and fully controlled laboratory environment. To overcome these limitations and realize point-of-care testing, many novel methods for direct sample analysis in the field have recently been developed by improving the speed and simplicity of detection. Commonly, these unconventional sensors rely on colorimetric, fluorescence, or electrochemical mechanisms to transduce signals from mercury. In the case of colorimetric and fluorescent sensors, benchtop methods have gradually evolved through technology convergence to give standalone platforms, such as paper-based assays and lab-on-a-chip systems, and portable measurement devices, such as smartphones. Electrochemical sensors that use screen-printed electrodes with carbon or metal nanomaterials or hybrid materials to improve sensitivity and stability also provide promising detection platforms. This review summarizes the current state of sensor platforms for the on-field detection of mercury with a focus on key features and recent developments. Furthermore, trends for next-generation mercury sensors are suggested based on a paradigm shift to the active integration of cutting-edge technologies, such as drones, systems based on artificial intelligence, machine learning, and three-dimensional printing, and high-quality smartphones.

Electrochemical impedimetric biosensors, featuring the use of Room Temperature Ionic Liquids (RTILs): Special focus on non-faradaic sensing

Over the last decade, significant advancements have been made in the field of biosensing technology. With the rising demand for personalized healthcare and health management tools, electrochemical sensors are proving to be reliable solutions; specifically, impedimetric sensors are gaining considerable attention primarily due to their ability to perform label-free sensing. The novel approach of using Room Temperature Ionic Liquids (RTILs) to improve the sensitivity and stability of these detection systems makes long-term continuous sensing feasible towards a wide range of sensing applications, predominantly biosensing. Through this review, we aim to provide an update on current scientific progress in using impedimetric biosensing combined with RTILs for the development of sensitive biosensing platforms. This review also summarizes the latest trends in the field of biosensing and provides an update on the current challenges that remain unsolved.

3D-printing pen versus desktop 3D-printers: Fabrication of carbon black/polylactic acid electrodes for single-drop detection of 2,4,6-trinitrotoluene

The fabrication of carbon black/polylactic acid (PLA) electrodes using a 3D printing pen is presented and compared with electrodes obtained by a desktop fused deposition modelling (FDM) 3D printer. The 3D pen was used for the fast production of electrodes in two designs using customized 3D printed parts to act as template and guide the reproducible application of the 3D pen: (i) a single working electrode at the bottom of a 3D-printed cylindrical body and (ii) a three-electrode system on a 3D-printed planar substrate. Both devices were electrochemically characterized using the redox probe [Fe(CN)₆]^3-/4- via cyclic voltammetry, which presented similar performance to an FDM 3D-printed electrode or a commercial screen-printed carbon electrode (SPE) regarding peak-to-peak separation (ΔEp) and current density. The surface treatment of the carbon black/PLA electrodes fabricated by both 3D pen and FDM 3D-printing procedures provided substantial improvement of the electrochemical activity by removing excess of PLA, which was confirmed by scanning electron microscopic images for electrodes fabricated by both procedures. Structural defects were not inserted after the electrochemical treatment as shown by Raman spectra (i_D/i_G), which indicates that the use of 3D pen can replace desktop 3D printers for electrode fabrication. Inter-electrode precision for the best device fabricated using the 3D pen (three-electrode system) was 4% (n = 5) considering current density and anodic peak potential for the redox probe. This device was applied for the detection of 2,4,6-trinitrotoluene (TNT) via square-wave voltammetry of a single-drop of 100 μL placed upon the thee-electrode system, resulting in three reduction peaks commonly verified for TNT on carbon electrodes. Limit of detection of 1.5 μmol L^-1, linear range from 5 to 500 μmol L^-1 and RSD lower than 4% for 10 repetitive measurements of 100 μmol L^-1 TNT were obtained. The proposed devices can be reused after polishing on sandpaper generating new electrode surfaces, which is an extra advantage over chemically-modified electrochemical sensors applied for TNT detection.

Thin films of poly(vinylidene fluoride-co-hexafluoropropylene)-ionic liquid mixtures as amperometric gas sensing materials for oxygen and ammonia

A gas sensor comprising of a planar electrode device covered with a thin layer of gel polymer electrolyte gave accurate and fast sensing responses for oxygen and ammonia detection in both the cathodic and anodic potential regions.

O2 reduction on a Au film electrode in an ionic liquid in the absence and presence of Mg2+ ions: Product formation and adlayer dynamics

Aiming at a detailed understanding of the interaction between an ionic liquid, O₂, and electrodes in Mg-air batteries, we performed a combined differential electrochemical mass spectrometry and in situ infrared spectroscopy model study on the interaction between the ionic liquid (IL) 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl) imide (BMP-TFSI) and a gold film electrode in the presence and absence of O₂ and Mg²⁺ ions in the potential range relevant for the oxygen reduction reaction (ORR) and evolution reaction. Detailed information on the dynamic exchange of adsorbed ions, on the stability/decomposition of the ionic liquid, and on the activity/selectivity/reversibility of the ORR is derived from measurements performed under potentiodynamic and potentiostatic conditions. In neat BMP-TFSI, we find the dynamics of the potential induced exchange of adsorbed ions to depend significantly on the exchange direction. In the presence of O₂, the anions formed in the ORR distinctly affect the adsorption characteristics of the IL ions and the exchange dynamics. Furthermore, the ORR changes from reduction to superoxide anions at moderate potentials to reduction to peroxide anion at more negative potentials. In the additional presence of Mg²⁺ ions, dominant magnesium peroxide and oxide formation result in an irreversible ORR, in contrast to the requirements of an efficient re-chargeable Mg-air battery. In addition, these ions result in the increasing formation of a blocking adlayer, reducing the coverage of adsorbed IL species.

Screen-Printed Graphite Electrodes as Low-Cost Devices for Oxygen Gas Detection in Room-Temperature Ionic Liquids

Screen-printed graphite electrodes (SPGEs) have been used for the first time as platforms to detect oxygen gas in room-temperature ionic liquids (RTILs). Up until now, carbon-based SPEs have shown inferior behaviour compared to platinum and gold SPEs for gas sensing with RTIL solvents. The electrochemical reduction of oxygen (O₂) in a range of RTILs has therefore been explored on home-made SPGEs, and is compared to the behaviour on commercially-available carbon SPEs (C-SPEs). Six common RTILs are initially employed for O₂ detection using cyclic voltammetry (CV), and two RTILs ([C₂mim][NTf₂] and [C₄mim][PF₆]) chosen for further detailed analytical studies. Long-term chronoamperometry (LTCA) was also performed to test the ability of the sensor surface for real-time gas monitoring. Both CV and LTCA gave linear calibration graphs-for CV in the 10-100% vol. range, and for LTCA in the 0.1-20% vol. range-on the SPGE. The responses on the SPGE were far superior to the commercial C-SPEs; more instability in the electrochemical responses were observed on the C-SPEs, together with some breaking-up or dissolution of the electrode surface materials. This study highlights that not all screen-printed ink formulations are compatible with RTIL solvents for longer-term electrochemical experiments, and that the choice of RTIL is also important. Overall, the low-cost SPGEs appear to be promising platforms for the detection of O₂, particularly in [C₄mim][PF₆].