Submicrometric Magnetic Nanoporous Carbons Derived from Metal–Organic Frameworks Enabling Automated Electromagnet-Assisted Online Solid-Phase Extraction

Application of three-dimensional printing technology in environmental analysis: A review

The development of environmental analysis devices with high performance is essential to assess the potential risks of environmental pollutants. However, it is still challenging to develop environmental analysis equipment with miniaturization, portability, and high sensitivity based on traditional processing techniques. In recent years, the popularity of 3D printing technology (3DP) with high precision, low cost, and unlimited design freedom has provided opportunities to solve the existing challenges of environmental analysis. 3D printing has brought solutions to promote the high performance and versatility of environmental analysis equipment by optimizing printing materials, enhancing equipment structure, and integrating multidisciplinary technology. In this paper, we comprehensively review the latest progress in 3D printing in various aspects of environmental analysis procedures, including but not limited to sample collection, pretreatment, separation, and detection. We highlight their advantages and challenges in determining various environmental contaminants through passive sampling, solid-phase extraction, chromatographic separation, and mass spectrometry detection. The manufacturing of 3D-printed environmental analysis devices is also discussed. Finally, we look forward to their development prospects and challenges.

A reciprocating magnetic field assisted on-line solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry determination of trace tetracyclines in water

A reciprocating magnetic-field-assisted on-line solid-phase extraction (RMF-SPE) method coupled with liquid chromatography-tandem mass spectrometry (LC-MS/MS) has been developed for continuous enrichment of trace chemicals in water samples. Under the assist of the reciprocating magnetic field, carboxyl-modified magnetic nanoparticles (CMNPs) were applied to prepare microcolumn with even dispersion by periodical motion, instead of traditional compaction as extraction sorbents. When water sample passed through the extraction region, dynamic sorbents generates an advantage of countless contacts between sorbents and targets without blocking for high efficient extraction. In this study, the on-line RMF-SPE method was established and evaluated by determination of tetracyclines (TCs) from water samples as analysis models, including oxytetracycline, tetracycline, demeclocycline, metacycline, chlortetracycline, and doxycycline. Experimental conditions have been investigated such as flow rate, reciprocating speed, elution time, and so on. The method showed high relative recovery (95.4-111.1%) and good repeatability with RSD from 2.9 to 11.8% for the 200 mL water sample. The linearity range, limits of detection (LODs), and limits of quantification (LOQs) were 0.5-200 μg L^-1 (chlortetracycline) and 0.1-200 μg L^-1 (other TCs), 12.0-74.1 ng L^-1, and 40.1-247 ng L^-1, respectively. More importantly, the high enrichment factors in a range of 204 (chlortetracycline) to 276 (demeclocycline) indicate that a small amount of dynamic sorbents (only 10 mg) give full play to extraction attributing to the reciprocating movement, especially for trace analysis and continuous extraction, which is significant for water samples from sea, river and domestic waste.

Boronic Acid-Functionalized Scholl-Coupling Mesoporous Polymers for Online Solid-Phase Extraction of Brassinosteroids from Plant-Derived Foodstuffs

Brassinosteroids (BRs) are natural, nontoxic, non-hazardous, biosafe, and eco-friendly plant hormones, possessing diverse pharmacological activities. However, little is known about the type and content of BRs in frequently consumed plant-derived foodstuffs because of their low abundance and high abundance of interference. In this study, a selective, accurate, and sensitive method based on the online solid-phase extraction using the boronic acid-functionalized Scholl-coupling microporous polymer was developed for the analysis of BRs in plant-derived foodstuffs. Under optimum conditions, an excellent linearity (R² ≥ 0.9970) and lower limits of detection (0.010-0.070 pg mL^-1) were obtained. The high relative recoveries were in the range of 90.33-109.34% with relative standard deviations less than 9.73%. The method was successfully used for the determination of BRs in fifteen plant-derived foodstuffs. The present work offers a valuable tool for exploring BRs from the plant-derived foodstuffs and can provide useful information for developing functional foods.

3D Printing in analytical sample preparation

In the last 5 years, additive manufacturing (three-dimensional printing) has emerged as a highly valuable technology to advance the field of analytical sample preparation. Three-dimensional printing enabled the cost-effective and rapid fabrication of devices for sample preparation, especially in flow-based mode, opening new possibilities for the development of automated analytical methods. Recent advances involve membrane-based three-dimensional printed separation devices fabricated by print-pause-print and multi-material three-dimensional printing, or improved three-dimensional printed holders for solid-phase extraction containing sorbent bead packings, extraction disks, fibers, and magnetic particles. Other recent developments rely on the direct three-dimensional printing of extraction sorbents, the functionalization of commercial three-dimensional printable resins, or the coating of three-dimensional printed devices with functional micro/nanomaterials. In addition, improved devices for liquid-liquid extraction such as extraction chambers, or phase separators are opening new possibilities for analytical method development combined with high-performance liquid chromatography. The present review outlines the current state-of-the-art of three-dimensional printing in analytical sample preparation.

Synthesis of 3D magnetic porous carbon derived from a metal–organic framework for the extraction of clenbuterol and ractopamine from mutton samples

Synthesis of MIL-100(Fe)-derived MPC and its application for the MSPE of CLB and RAC.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

An online field-assisted micro-solid-phase extraction device coupled with high-performance liquid chromatography for the direct analysis of solid samples

Herein, a total online device based on field-assisted extraction (FAE), micro-solid-phase extraction (μ-SPE), and high-performance liquid chromatography (HPLC) was designed. Solid samples were pretreated with ultrasound-microwave synergic effects, and then the extract was cleaned up online with a monolithic column, followed by HPLC analysis. The cross-actions between ultrasound and microwave along with other extraction parameters were studied systematically. The efficiency of this online method was verified in the determination of polycyclic aromatic hydrocarbons (PAHs) in foods and tetracycline antibiotics (TCAs) in cosmetic samples. The detection limits of nine PAHs including fluorene, phenanthrene, anthracene, fluoranthene, benzo[k]fluoranthene, benz[a]anthracene, benzo[b]fluoranthene, pyrene, and benzo[a]pyrene were all within 0.075-0.30 μg/kg, as well as four TCAs including oxytetracycline, tetracycline, chlortetracycline, and doxycycline were within 0.02-0.06 μg/kg. Six PAHs were found in roast potatoes and baked fish and the recoveries were in the range of 71.5-119.7% with RSDs of 0.2-10.9% (n = 3). The recoveries for TCAs in cosmetic samples were in the range of 75.3-118.0% with RSDs lower than 8.2% (n = 3). Compared with those offline methods, this total online FAE-μ-SPE-HPLC method not only simplifies the operation process, but also increases the precision and accuracy. Beyond trace analytes analysis in solid and semi-solid matrixes, application of this total online analysis method can also be extended to investigate field-assisted extraction mechanisms. Graphical abstract.

Direct photoimmobilization of extraction disks on "green state" 3D printed devices

Post-curing is essential to improve the mechanical properties of 3D printed parts fabricated by stereolithography (SLA), since right after 3D printing they remain in a "green state". It means that the 3D printed parts have reached their final shape, but the polymerization reaction has not been yet completed. Herein, we take advantage of the tacky partially polymerized surface of "green state" SLA 3D printed parts to immobilize extraction disks and miniature magnets, which after UV post-curing, become permanently attached to the 3D printed part resulting in a rotating-disk sorptive extraction device (RDSE). The developed "stick & cure" procedure is reagent-free and does not require any additional preparation time, specialized skills, or instrumentation. As proof of concept, 3D printed RDSE devices with immobilized chelating disks have been applied to the simultaneous extraction of 14 trace metals prior to ICP-OES determination, featuring LODs between 0.03 and 1.27 μg L^-1, and an excellent device-to-device reproducibility (n = 5, RSD = 2.7-8.3%). The developed method was validated using certified wastewater and soil reference samples, and satisfactory spiking recoveries were obtained in the analysis of highly polluted solid waste treatment plant leachates (89-110%). In addition, exploiting the versatility of 3D printing, nine RDSE devices with different shapes were fabricated. Their performance was evaluated and compared for the fast extraction of the highly toxic Cr (VI) as its 1,5-diphenylcarbazide complex in reversed-phase mode, showing different extraction performance on depending on the shape of the 3D printed RDSE device.

3D printed device including disk-based solid-phase extraction for the automated speciation of iron using the multisyringe flow injection analysis technique

The development of advanced manufacturing techniques is crucial for the design of novel analytical tools with unprecedented features. Advanced manufacturing, also known as 3D printing, has been explored for the first time to fabricate modular devices with integrated features for disk-based automated solid-phase extraction (SPE). A modular device integrating analyte oxidation, disk-based SPE and analyte complexation has been fabricated using stereolithographic 3D printing. The 3D printed device is directly connected to flow-based analytical instrumentation, replacing typical flow networks based on discrete elements. As proof of concept, the 3D printed device was implemented in a multisyringe flow injection analysis (MSFIA) system, and applied to the fully automated speciation, SPE and spectrophotometric quantification of Fe in water samples. The obtained limit of detection for total Fe determination was 7ng, with a dynamic linear range from 22ng to 2400ng Fe (3mL sample). An intra-day RSD of 4% (n = 12) and an inter-day RSD of 4.3% (n = 5, 3mL sample, different day with a different disk), were obtained. Incorporation of integrated 3D printed devices with automated flow-based techniques showed improved sensitivity (85% increase on the measured peak height for the determination of total Fe) in comparison with analogous flow manifolds built from conventional tubing and connectors. Our work represents a step forward towards the improved reproducibility in the fabrication of manifolds for flow-based automated methods of analysis, which is especially relevant in the implementation of interlaboratory analysis.

Amino acid-based ionic liquid surface modification of magnetic nanoparticles for the magnetic solid-phase extraction of heme proteins

Amino acid-based ionic liquid functionalized magnetic nanoparticles were fabricated as an MSPE adsorbent for hemoglobin with a binding capacity of 1.58 g g⁻¹.