Detection of Metoprolol in Human Biofluids and Pharmaceuticals via Ion-Transfer Voltammetry at the Nanoscopic Liquid/Liquid Interface Array

Electrochemical/Electrochemiluminescence Sensors Based on Vertically-Ordered Mesoporous Silica Films for Biomedical Analytical Applications

Vertically-ordered mesoporous silica films (VMSF, also named as silica isoporous membranes) have shown tremendous potential in the field of electroanalytical sensors due to their unique features in terms of controllable and ultrasmall nanopores, high molecular selectivity and permeability, and mechanical stability. This review will present the recent progress on the biomedical analytical applications of VMSF, focusing on the small biomolecules, diseases-related biomarkers, drugs and cancer cells. Finally, conclusions with recent developments and future perspective of VMSF in the relevant fields will be envisioned.

Electrochemical screening of selected β-blockers at a polarized liquid-liquid interface

This paper describes the electrochemical behavior of five β-blockers at the polarized liquid-liquid interface formed between aqueous solution (sodium chloride solution or Britton-Robinson buffers) and bis(triphenylphosphoranylidene)ammonium tetrakis(4-chlorophenyl)borate (BTPPATPBCl) dissolved in 1,2-dichloroethane (the organic phase). All measurements reported in this work were conducted using cyclic voltammetry (CV). The effects of the concentration of analytes, the pH of the aqueous phase, and applied electrochemical parameters on the analytical performance of the studied system are studied and discussed. The linear dynamic ranges (LDRs) of the studied β-blockers were in the range of 5-200 μmol L-1 and the lowest limit of detection (LOD) value was determined for pindolol (LOD = 1.96 μM μmol L-1). The highest LOD value was 4.96 μmol L-1 found for nebivolol. In addition, physicochemical parameters such as the formal Galvani potential difference (Δaqorgϕ), formal Gibbs free energies of the ion transfer reaction (ΔaqorgG') and partition coefficients (log P'aq/org) for all studied molecules were determined. The latter were compared and correlated with the available literature values of log Poctanol. Finally, a standard addition method was used to determine the concentration of nebivolol in pharmaceutical preparations using a platform based on the electrified liquid-liquid interface.

Biorecognition antifouling coatings in complex biological fluids: a review of functionalization aspects

Recent progress in biointerface research has highlighted the role of antifouling functionalizable coatings in the development of advanced biosensors for point-of-care bioanalytical and biomedical applications dealing with real-world complex samples. The resistance to nonspecific adsorption promotes the biorecognition performance and overall increases the reliability and specificity of the analysis. However, the process of modification with biorecognition elements (so-called functionalization) may influence the resulting antifouling properties. The extent of these effects concerning both functionalization procedures potentially changing the surface architecture and properties, and the physicochemical properties of anchored biorecognition elements, remains unclear and has not been summarized in the literature yet. This critical review summarizes these key functionalization aspects with respect to diverse antifouling architectures showing low or ultra-low fouling quantitative characteristics in complex biological media such as bodily fluids or raw food samples. The subsequent discussion focuses on the impact of functionalization on fouling resistance. Furthermore, this review discusses some of the drawbacks of available surface sensitive characterization methods and highlights the importance of suitable assessment of the resistance to fouling.

Regional and functional division of functional elements of solid-state nanochannels for enhanced sensitivity and specificity of biosensing in complex matrices

Solid-state nanochannels (SSNs) provide a promising approach for biosensing due to the confinement of molecules inside, their great mechanical strength and diversified surface chemical properties; however, until now, their sensitivity and specificity have not satisfied the practical requirements of sensing applications, especially in complex matrices, i.e., media of diverse constitutions. Here, we report a protocol to achieve explicit regional and functional division of functional elements at the outer surface (FE_OS) and inner wall (FE_IW) of SSNs, which offers a nanochannel-based sensing platform with enhanced specificity and sensitivity. The protocol starts with the fabrication and characterization of the distribution of FE_OS and FE_IW. Then, the evaluation of the contributions of FE_OS and FE_IW to ionic gating is described; the FE_IW mainly regulate ionic gating, and the FE_OS can produce a synergistic effect. Finally, hydrophobic or highly charged FE_OS are applied to ward off interference molecules, non-target molecules that may affect the ionic signal of nanochannels, which decreases false signals and helps to achieve the highly specific ionic output in complex matrices. Compared with other methods currently available, this method will contribute to the fundamental understanding of substance transport in SSNs and provide high specificity and sensitivity in SSN-based analyses. The procedure takes 3-6 d to complete.

Quantitative Analysis of Redox-Inactive Ions by AC Voltammetry at a Polarized Interface between Two Immiscible Electrolyte Solutions

The interface between two immiscible electrolyte solutions (ITIES) is ideally suited to detect redox-inactive ions by their ion transfer. Such electroanalysis, based on the Nernst-Donnan equation, has been predominantly performed using amperometry, cyclic voltammetry, or differential pulse voltammetry. Here, we introduce a new electroanalytical method based on alternating-current (AC) voltammetry with inherent advantages over traditional approaches such as avoidance of positive feedback iR compensation, a major issue for liquid|liquid electrochemical cells containing resistive organic media and interfacial areas in the cm² and mm² range. A theoretical background outlining the generation of the analytical signal is provided and based on extracting the component that depends on the Warburg impedance from the total impedance. The quantitative detection of a series of model redox-inactive tetraalkylammonium cations is demonstrated, with evidence provided of the transient adsorption of these cations at the interface during the course of ion transfer. Since ion transfer is diffusion-limited, by changing the voltage excitation frequency during AC voltammetry, the intensity of the Faradaic response can be enhanced at low frequencies (1 Hz) or made to disappear completely at higher frequencies (99 Hz). The latter produces an AC voltammogram equivalent to a "blank" measurement in the absence of analyte and is ideal for background subtraction. Therefore, major opportunities exist for the sensitive detection of ionic analyte when a "blank" measurement in the absence of analyte is impossible. This approach is particularly useful to deconvolute signals related to reversible electrochemical reactions from those due to irreversible processes, which do not give AC signals.

Design, synthesis and biological evaluation of isochroman-4-one hybrids bearing piperazine moiety as antihypertensive agent candidates

7,8-Dihydroxy-3-methyl-isochromanone-4 (XJP), is a polyphenolic natural product with moderate antihypertensive activity. To obtain new agents with stronger potency and safer profile, we employed XJP and naftopidil as the lead compounds to design and synthesize a novel class of hybrids as antihypertensive agent candidates. In the present study, a series of hybrids (6a-r) of XJP bearing arylpiperazine moiety, which is identified as the pharmacophore of naftopidil, were designed and synthesized as novel α₁-adrenergic receptor antagonists. The biological evaluation showed that target compounds 6c, 6e, 6f, 6g, 6h, 6m and 6q possessed potent in vitro vasodilation potency and α₁-adrenergic receptor antagonistic activity. Furthermore, the most potent compound 6e significantly reduced the systolic and diastolic blood pressure in spontaneously hypertensive rats (SHRs), which was comparable to that of naftopidil, and it had no observable effects on the basal heart rate, suggesting that 6e deserves to be further investigated as a potential clinical candidate for the treatment of hypertension.

Metoprolol: solid forms of a top selling antihypertensive

A new polymorph of metoprolol base, form II, was identified and characterized by differential scanning calorimetry, X-ray powder diffraction and infrared spectroscopy. A new salt of metoprolol and nicotinic acid was also obtained and characterized.

Label-free electrochemical biosensors based on 3,3',5,5'-tetramethylbenzidine responsive isoporous silica-micelle membrane

3,3',5,5'-Tetramethylbenzidine (TMB) has been frequently used as an indicator in G-quadruplex/hemin DNAzyme (G4zyme)-based chemical and biochemical analysis, and its oxidation products are usually monitored by electrochemical or optical methods to quantify G4zyme formation-related analytes. Herein we report a simple electrochemical approach based on isoporous silica-micelle membrane (iSMM) to measure TMB, instead of its oxidation products, in G4zyme-based detection of specific analytes. The iSMM was grown on the indium tin oxide (ITO) electrode, which was composed of highly ordered, vertically oriented silica nanochannels and cylindrical micelles of cetyltrimethylammonium. The iSMM-ITO electrode was selectively responsive to neutral TMB but not its oxidation products, thanks to the sieving and pre-concentration capacity of micellar structures in terms of molecular charge and lipophilicity. In other words, only TMB could be extracted and enriched into micelles and subsequently oxidized at the underlying ITO electrode surface (namely the micelle/ITO interface), generating an amplified anodic current. Since the depletion of TMB was catalyzed by G4zymes formed in the presence of specific analyte, the decrease of this anodic current enabled the quantitative detection of this analyte. The current variation relative to its initial value ((j₀-j)/j₀), termed as the current attenuation ratio, showed the obvious dependence on the analyte concentration. As proof-of-concept experiments, four substances, i.e., potassium cation (K⁺), adenosine triphosphate, thrombin and nucleic acid, were detected in aqueous media and the analysis of K⁺ in pre-treated human serum was also performed.

Electrochemical detection of Alzheimer's disease related substances in biofluids by silica nanochannel membrane modified glassy carbon electrodes

Alzheimer's disease (AD) affects middle- and old-age populations, and causes loss of brain weight, degradation of brain functions and memory loss.

A Gelated Colloidal Crystal Attached Lens for Noninvasive Continuous Monitoring of Tear Glucose

Patients of diabetes mellitus urgently need noninvasive and continuous glucose monitoring in daily point-of-care. As the tear glucose concentration has a positive correlation with that in blood, the hydrogel colloidal crystal integrated into contact lens possesses promising potential for noninvasive monitoring of glucose in tears. This paper presents a new glucose-responsive sensor, which consists a crystalline colloidal array (CCA) embedded in hydrogel matrix, attached onto a rigid gas permeable (RGP) contact lens. This novel sensing lens is able to selectively diffract visible light, whose wavelength shifts between 567 and 468 nm according to the alternation of the glucose concentration between 0 and 50 mM and its visible color change between reddish yellow, green, and blue. The detection limit of responsive glucose concentration can be reduced to 0.05 mM. Its combination with a contact lens endows it with excellent biocompatibility and portability, which shows great possibility for it to push the development of glucose-detecting devices into new era.