Photoelectrochemical Bioanalysis Platform of Gold Nanoparticles Equipped Perovskite Bi4NbO8Cl

Cd2 Nb2 Te4 O15 : A Novel Pseudo-Aurivillius-Type Tellurite with Unprecedented Nonlinear Optical Properties and Excellent Stability

Oxides are emerging candidates for mid-infrared (mid-IR) nonlinear optical (NLO) materials. However, their intrinsically weak second harmonic generation (SHG) effects hinder their further development. A major design challenge is to increase the nonlinear coefficient while maintaining the broad mid-IR transmission and high laser-induced damage threshold (LIDT) of the oxides. In this study, it is reported on a polar NLO tellurite, Cd2 Nb2 Te4 O15 (CNTO), featuring a pseudo-Aurivillius-type perovskite layered structure composed of three types of NLO active groups, including CdO6 octahedra, NbO6 octahedra, and TeO4 seesaws. The uniform orientation of the distorted units induces a giant SHG response that is ≈31 times larger than that of KH2 PO4 , the largest value among all reported metal tellurites. Additionally, CNTO exhibits a large band gap (3.75 eV), a wide optical transparency window (0.33-14.5 µm), superior birefringence (0.12@ 546 nm), high LIDT (23 × AgGaS2 ), and strong acid and alkali resistance, indicating its potential as a promising mid-IR NLO material.

Nanoprecipitated CoPi enhanced photoelectrochemical water oxidation toward sensitive and selective Co2+ detection

The detection of heavy metal ions Co²⁺ is of great significance to the environment and human health. Herein, a simple, highly selective and sensitive photoelectrochemical detection strategy for Co²⁺ was developed based on the enhanced activity by nanoprecipitated CoPi on the Au nanoparticle decorated BiVO₄ electrode. The new photoelectrochemical sensor has a low detection limit of 0.03 μΜ and wide detection range of 0.1-10, and 10-6000 μΜ, with a high selectivity over other metal ions. The Co²⁺ concentration in tap water and commercial drinking water has also been successfully determined with the proposed method. Scanning electrochemical microscopy technique was employed to characterize the photocatalytic performance and heterogenous electron transfer rate of electrodes in situ, further revealing the photoelectrochemical sensing mechanism. Besides determining Co²⁺ concentration, this approach of enhanced catalytic activity by nanoprecipitation can be further extended to develop a variety of electrochemical, photoelectrochemical and optical sensing platforms for many other hazardous ions and biological molecules.

A sensitive label-free biosensor based on Ag2S-sensitived Bi2WO6/BiOBr heterojunction for photoelectrochemical immunoassay of prostate specific antigen

Prostate cancer is one of the most common cancers in the world, and its early diagnosis can effectively reduce mortality. A new label-free photoelectrochemical (PEC) immunosensor on the basis of Bi₂WO₆/BiOBr nanocomposite materials has been successfully prepared for the test of prostate-specific antigen (PSA) in human serum in this work. The Ag₂S-sensitized Bi₂WO₆/BiOBr heterojunction was used as a photosensitive material, which effectively improved the photocurrent response. On Bi₂WO₆/BiOBr surface, dopamine immobilized PSA antibody by self-polymerizing to form polydopamine membrane. Antigen and antibody are specifically combined to achieve quantitative detection of PSA according to the current changes at different concentrations of antigen. Under the optimal experimental conditions, the PEC immunosensor has an ideal linear relationship between 1 pg/mL - 50 ng/mL, and the detection limit is 0.084 pg/mL. In addition, the prepared immunosensor has good stability, reproducibility and selectivity, providing a new method for the detection of PSA in actual sample analysis.

CdS-Modified TiO2 Nanotubes with Heterojunction Structure: A Photoelectrochemical Sensor for Glutathione

The formation of heterojunction structures can effectively prevent the recombination of photogenerated electron-hole pairs in semiconductors and result in the enhancement of photoelectric properties. Using TiO₂ nanotubes (prepared using the hydrothermal-impregnation method) as carriers, CdS-TiO₂NTs were fabricated as a photoelectrochemical (PEC) sensor, which can be used under visible light and can exhibit good PEC performance due to the existence of the heterojunction structure. The experimental results show that the prepared CdS-TiO₂NTs electrode had a linear response to 2-16 mM glutathione (GSH). The sensor's sensitivity and detection limit (LOD) were 102.9 µA·mM^-1 cm^-2 and 27.7 µM, respectively. Moreover, the biosensor had good stability, indicating the potential application of this kind of heterojunction PEC biosensor.

Dual Direct Z-Scheme Heterojunction with Growing Photoactive Property for Sensitive Photoelectrochemical and Colorimetric Bioanalysis

A dual direct Z-scheme heterojunction photoactive material of CoTiO₃/g-C₃N₄/Bi₂O₃ was designed based on calcination and in situ illumination-assisted process for sensitivity bioproteins detection which combined with MnO₂ nanoflowers to achieve signal quenching strategy. The complex consists of two direct Z-scheme heterojunctions of g-C₃N₄ and two photoactive materials CoTiO₃ and Bi₂O₃. This great structure could augment the migration of photogenerated electrons obviously, which boost the photocurrent greatly and prefer the photoelectric application of perovskite oxide. To improve sensitivity, the nanoflower like MnO₂ with oxidation performance is introduced into the system and used as a label fixed on secondary antibody to oxidize electron donor (AA) to achieve an enlarged signal quenching value. Interestingly, MnO₂ also showed an effective oxidation activity for TMB oxidation, leading to a chromogenic reaction. With the change of antigen concentration, the color of the test electrolyte also changes. Herein, the designed smart photoelectrochemical sensor shows a wide detection range (neuron specific enolase as an example) from 0.00005 to 200 ng/mL with a detection limit as low as 28 fg/mL. And the colorimetric assay for target detection owns a liner range from 0.1 to 20 ng/mL accompany with a detection limit of 0.05 ng/mL. These two designed sensing modes offer a new strategy for signal amplification of perovskite oxide and the possibility of real-time detection.

CuO Nanozymes as Multifunctional Signal Labels for Efficiently Quenching the Photocurrent of ZnO/Au/AgSbS2 Hybrids and Initiating a Strong Fluorescent Signal in a Dual-Mode Microfluidic Sensing Platform

A novel dual-mode microfluidic sensing platform based on CuO nanozymes as a photoelectrochemical (PEC)-fluorescent (FL) multifunctional signal label was developed for ultrasensitive neuron specific enolase (NSE) detection. Herein, ZnO/Au/AgSbS₂ hybrids, possessing excellent PEC properties, were first exploited as a sensing matrix to provide a stable photocurrent. The controlled synthesis of photoactive ZnO nanoflowers (NFs) was successfully conducted using a microfluidic reactor in the scale of seconds. Furthermore, the photocurrent of ZnO NFs decorated by Au and AgSbS₂ nanoparticles significantly improved, owing to the local surface plasma resonance effect of Au and matching band structure between ZnO and AgSbS₂. A strategy of catalytic oxidation ascorbic acid (AA) by CuO nanozymes was proposed to quench the PEC signals and initiate FL signals. CuO nanoparticles growing on conductive carbon spheres (CuO@CSs) as secondary antibodies' labels could efficiently catalyze the oxidation of AA to achieve a PEC "signal-off" state. Then, the produced dehydroascorbic acid reacting with o-phenylenediamine opportunely generated a strong FL signal. Importantly, wide linear ranges of 0.0001-150 ng/mL for the PEC technique and 0.001-150 ng/mL for the FL method with a low detection limit of 0.028 and 0.25 pg/mL, respectively, could guarantee the sensitive detection of NSE.

SERS-Active Composites with Au-Ag Janus Nanoparticles/Perovskite in Immunoassays for Staphylococcus aureus Enterotoxins

The accurate detection of Staphylococcus aureus enterotoxins (SEs) is vital for food safety owing to their high pathogenicity, which may be performed with surface-enhanced Raman scattering (SERS) if SERS-active nanostructures are used. Herein, a Au-Ag Janus nanoparticle (NPs)/perovskite composite-engineered SERS immunoassay was developed for SEC detection. Plasmonic Au-Ag Janus NPs demonstrated inherent SERS activity from the 2-mercaptobenzoimidazole-5-carboxylic acid ligands. CsPbBr₃@mesoporous silica nanomaterials (MSNs) were prepared and transformed into CsPb₂Br₅@MSNs in the aqueous phase. Paired SEC antibody-antigen-driven plasmonic Au-Ag Janus NP-CsPb₂Br₅@MSN composites were prepared. They showed amplified SERS activity, attributed to the depressed plasmonic decay due to electromagnetic field enhancement and the electron transfer mechanism. A positive relationship was established between SERS signals of composites and the SEC concentration. An additive-free SERS immunoassay was developed for simple, sensitive, and reproducible SEC detection. This study will be extended to develop multiple additive-free SERS-active plasmonic NP/perovskite composites that will open up the possibility of exploring more SERS detection probes for food safety monitoring.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Surface Plasmon Coupling Electrochemiluminescence Immunosensor Based on Polymer Dots and AuNPs for Ultrasensitive Detection of Pancreatic Cancer Exosomes

Polymer dots (Pdots) have become attractive electrochemiluminescence (ECL) luminophores due to their facile synthesis, easy modification, and stable electrochemical and optical properties. However, their ECL efficiency is not high enough for practical applications. In this work, we proposed an ECL immunosensor based on localized surface plasmon resonance (LSPR) between AuNPs and Pdots for the determination of pancreatic cancer exosomes. Based on the finite-difference time-domain simulations and the band energy of Pdots and AuNPs, we proposed the possible LSPR mechanism. The hot electrons of plasmonic AuNPs were photoexcited to surface plasmon states by ECL emission of Pdots, and then the excited hot electrons were transferred to the conduction band of Pdots, which significantly improved the ECL efficiency of Pdots. The ECL immunosensor displayed a wide calibration range of 1.0 × 10³ to 1.0 × 10⁶ particles/mL with a detection limit of 400 particles/mL. Cancer-related protein profiling revealed high selectivity toward different expressions of exosomal surface proteins from PANC-01, HeLa, MCF-7, and HPDE6-C7 cell lines. The proposed ECL system exhibits a promising prospect for protein biomarker profiling and early cancer-related diagnosis.

Photoelectrochemical biosensor for DNA hydroxymethylation detection based on the enhanced photoactivity of in-situ synthesized Bi4NbO8Cl@Bi2S3 heterojunction

As an important epigenetic modification, 5-hydroxymethylcytosine (5hmC) aroused wide concern about the distribution and the function. Due to the necessity of 5hmC detection, a novel photoelectrochemical (PEC) biosensor was established based on the in-situ generated heterojunction of Bi₄NbO₈Cl@Bi₂S₃, which was employed as the substrate material with excellent photoelectric property. The specific recognition of 5hmC relied on the covalent reaction between -CH₂OH of 5hmC and -SH on the substrate electrode under the catalysis of M.HhaI methyltransferase. Afterwards, ZrO₂ was used as signal amplification unit capturing by the specific reaction of Zr with the phosphate group of 5hmC. The experimental results demonstrated well specificity and sensitivity of this biosensor. Under optimal conditions, the linear relationship between the photocurrent and the logarithm value of 5hmC concentration was constructed with the range from 0.3 to 300 nM and the detection limit of 0.0779 nM (S/N = 3). The procedures of constructing this biosensor were compact and convenient, and this biosensor realized actual detection of 5hmC level in wheat sample. Significantly, this biosensor was applied to a preliminary study that the heavy metal Pb²⁺ and the perfluorooctanoic acid influence the expression of 5hmC in the genomic DNA of wheat seedling roots and leaves.

Photoelectrochemical aptasensor based on La2Ti2O7/Sb2S3 and V2O5 for effectively signal change strategy for cancer marker detection

In this item, a high-efficiency signal "on-off-on" strategy photoelectrochemical (PEC) apatsensor was resoundingly developed for target ultrasensitive analysis. Primarily, the heterojunction formation between Cd: Sb₂S₃ and La₂Ti₂O₇ was contributed to the first "signal-on" state to improve the stability of the PEC platform. Secondly, V₂O₅ nanosphere act as a catalyst for H₂O₂ was used to label on aptamer DNA to consume electron donor for achieving "signal-off" state. Then target analyte was modified on the surface of the PEC platform, and part of V₂O₅ with aptamer DNA would be released from the aptasensor surface, thus, the "signal-on" state was realized again. In this signal "on-off-on" strategy, the PEC performance of perovskite La₂Ti₂O₇ was effectively perfected with Cd: Sb₂S₃ sensitization, and broaden the application of perovskite in PEC sensor field. And the signal attenuation and recovery strategy were distinctly elevated the sensitivity of the aptasensor. In the preferred detection conditions, the proposed PEC sensor for analyte (PSA as an example) analysis revealed a wide sensing range from 1.000 × 10^-5 to 500.0 ng/mL, own a low detection limit of 4.300 fg/mL. This smart response change mode also provide prospect for other target detection, and offer a reference to signal transform for other electrochemical method.

An electron donor-acceptor organic photoactive composite with Schottky heterojunction induced photoelectrochemical immunoassay

A signal enhancement photoelectrochemical (PEC) immunoassay system induced by the composite (PTCs@Au) of electron donor-acceptor with Schottky heterojunction was designed. Carcinoembryonic antigen (CEA) was selected as a model target. Initially, the capture anibody (Ab1) was linked to gold nanoparticles electrodeposited on glassy carbon electrode and sealed by bovine serum albumin. Meanwhile, the organic semiconductor (PTCs) with the structure of electron donor-acceptor was synthetized from perylene tetracarboxylic dianhydride (acceptor) and dopamine (donor) via amidation reaction. Then PTCs@Au composite with Schottky heterojunction was formed through gold nanoparticles in situ reduction and functionalization with PTCs. Next, the detection antibody was labeled by PTCs@Au composite (Ab2-PTCs@Au) as an immuno-probe. The PTCs@Au was introduced via sandwich immune reaction leading to enhancement PEC signal without additional electron donor nor acceptor for achieving quantitative detection of CEA under external light. The proposed immunoelectrode showed dynamic ranges of 0.5 fg mL^-1 to 10 pg mL^-1 and 10 pg mL^-1 to 1 μg mL^-1 with the detection limit of 0.17 fg mL^-1. In addition, this PEC strategy with acceptable selectivity and stability can be potentially applied to detect other targets by choosing appropriate target recognition unit.

Ultra-sensitive photoelectrochemical aptamer biosensor for detecting E. coli O157:H7 based on nonmetallic plasmonic two-dimensional hydrated defective tungsten oxide nanosheets coupling with nitrogen-doped graphene quantum dots (dWO3•H2O@N-GQDs)

Light absorption and interfacial engineering of photoactive materials play vital roles in photoexcited electron generation and electron transport, and ultimately boost the performance of photoelectrochemical (PEC) biosensing. In this work, a novel high-performance photoelectrochemical (PEC) biosensing platform was fabricated based on nonmetallic plasmonic tungsten oxide hydrate nanosheets (WO₃•H₂O) coupling with nitrogen doped graphene quantum dots (N-GQDs) by a facile one-step hydrothermal approach. The localized surface plasmon resonance (LSPR) properties were achieved by oxygen vacancy engineered WO₃·H₂O (dWO₃•H₂O), which could greatly extend the light absorption from visible light to near-infrared light. Moreover, by coupling with N-GQDs, the as-fabricated heterojunction (dWO₃•H₂O@N-GQD) provided a much enhanced photoelectric response due to the efficient charge transfer. By conjugation with E.coli O157:H7 aptamer, a novel PEC aptasensor based on dWO₃•H₂O@N-GQD heterojunction was fabricated with a high sensitivity for detection of E.coli O157:H7. The limit of detection (LOD) of this PEC aptasensor is 0.05 CFU/mL with a linear detection range from 0.1 to 10⁴ CFU/mL. Moreover, high reproducibility and good accuracy could also be achieved for analysis in milk samples. This work could provide a promising platform for the development of PEC bioanalysis and offer an insight into the non-metallic plasmonic materials based heterojunctions for high-performances PEC biosensing.

Hole Doping to Enhance the Photocatalytic Activity of Bi4NbO8Cl

An increase of carrier concentration is one of the most important routes for enhancing the catalytic performance of semiconductor photocatalysts. In this study, the Sillén–Aurivillius oxychloride Bi4NbO8Cl with hole doping was successfully prepared by a solid-state reaction method. X-ray powder diffraction (XRD), scanning electron microscopy (SEM), ultraviolet–visible diffuse reflectance spectra (UV–vis DRS), X-ray photoelectron spectrometry (XPS) and photoluminescence spectra (PL) were used to characterize and analyze the prepared samples. The experimental results and density functional theory calculations demonstrate that hole doping can be formed in Bi4NbO8Cl by inserting zinc into the niobium site, and the photocatalytic activity can be improved by introducing additional holes into Bi4NbO8Cl. The photogenerated hole (h+) is considered to be the main active species to degrade trypan blue (TB) through trapping experiments. The optimal photocatalyst of Bi4Nb0.8Zn0.2O8Cl exhibits excellent photocatalytic activity in degradation of trypan blue under visible light irritation. Moreover, a possible photocatalytic degradation mechanism is discussed according the experimental and analytical results.

Fluorescent methylammonium lead halide perovskite quantum dots as a sensing material for the detection of polar organochlorine pesticide residues

Methylammonium lead halide perovskite quantum dots (MAPB-QDs) have been widely used for photovoltaic devices due to their special electronic structures. In this work, MAPB-QDs were used for the first time to detect polar organochlorine pesticides (OCPs) based on the phenomenon that the fluorescence spectra of MAPB-QDs were blue-shifted in the presence of polar OCPs. Furthermore, ¹H NMR, FTIR, XPS and XRD were performed first to illustrate the sensing mechanism. In the presence of polar OCPs, the MAPB-QDs' capping ligands, oleic acid (OA) and oleylamine (OAm), were replaced with OCPs and then the chlorine element was adequately doped into QDs, resulting in the increase of the MAPB-QDs' bandgap. As result of the insufficient stability of MAPB-QDs in the presence of moisture, MAPB-QDs were mixed with PDMS and used as the colorimetric cards for fast detection of OCPs in real samples.

Direct-readout photoelectrochemical lab-on-paper biosensing platform based on coupled electricity generating system and paper supercapacitors

A direct-readout photoelectrochemical (PEC) lab-on-paper device based on coupled an electricity generating system and paper supercapacitors was established for highly sensitive detection of adenosine triphosphate (ATP). Concretely, CdSe quantum dots (QDs) decorated ZnO networks assembled sensing surface provided outstanding photoelectric properties, on which glucose oxidase (GOx) labeled aptamer was subsequently immobilized via the hybridization chain reaction. With analytes present, specific recognition was stimulated by aptamer, resulting in labeled GOx released. Such released GOx could flow to electrochemical cell to conduct electrochemical redox reactions, which could effectively produce electricity that was stored by capacitor I. Sequentially, photoactive material produced an outstanding voltage due to the decrease of steric hindrance on the sensing interface, which was utilized for charging an external capacitor II. The two instantaneous current was acquired along with the discharge of capacitor I and II by digital multimeter (DMM) readout, respectively. The summational current values performed an increment in pace with the addition of target ATP concentration with the dynamic working range from 10 nM to 3 μM and a detection limit of 6.3 nM attained. Significantly, the signal amplified strategy utilizing as-generated electricity from electrochemical redox reactions were isolated from the photoelectrodes, which was beneficial for amplifying the signal response in the PEC matrices and the development of more efficient signal performance.

Plasmonic Enhanced Gold Nanoclusters-Based Photoelectrochemical Biosensor for Sensitive Alkaline Phosphatase Activity Analysis

Low-toxicity gold nanoclusters-decorated Ag@SiO₂ (Au NCs-Ag@SiO₂) nanocomposites modified plasmonic photoelectrodes were first fabricated to improve the photoelectric properties of Au NCs and practical application in biological detection. Through adjusting distance between Au NCs and plasmonic silver nanoparticles (Ag NPs), the photocurrent intensity of Au NCs enhanced by 3.8 times attributed to strong competition between enhancement functions of hot electron transfer, local electric field, light scattering effects, and quenching functions of nonradiative energy transfer. Further comparison between experimental results and theoretical simulations were conducted to gain a deeper understanding toward the photoelectric enhancement mechanism. Moreover, Au NCs-Ag@SiO₂ nanocomposites was successfully applied to the construction of photoelectrochemical (PEC) biosensors for sensitively detecting alkaline phosphatase activity. This proposed PEC biosensor showed a wide linear range from 0.04 to 400 U·L^-1, and a low detection limit of 0.022 U·L^-1.

Platinum and Iridium Oxide Co-modified TiO2 Nanotubes Array Based Photoelectrochemical Sensors for Glutathione

Oriented TiO₂ nanotubes, which are fabricated by anodic oxidation method, are prospective in photoelectrochemical analysis and sensors. In this work, Pt and IrO₂ co-modified TiO₂ nanotubes array was prepared via a two-step deposition process involving the photoreductive deposition of Pt and chemical deposition of IrO₂ on the oriented TiO₂ nanotubes. Due to the improved separation of photo-generated electrons and holes, Pt-IrO₂ co-modified TiO₂ nanotubes presented significantly higher PEC activity than pure TiO₂ nanotubes or mono-modified TiO₂ nanotubes. The PEC sensitivity of Pt-IrO₂ co-modified TiO₂ nanotubes for glutathione was also monitored and good sensitivity was observed.

Ultrasensitive Paper-Based Photoelectrochemical Sensing Platform Enabled by the Polar Charge Carriers-Created Electric Field

Efficient separation of electron-hole pairs is vitally crucial to enhancing the analytical performance of paper-based photoelectrochemical (PEC) bioanalysis. Herein, a simple but effective strategy is developed to modulate the effective separation of photogenerated electrons and holes via introducing a polar charge carriers-created (PCC) electric field induced by a classical perovskite ferroelectric BaTiO₃ (BTO). By inserting it between the n-type WO₃ nanoflakes and p-type Cu₂O (WO₃ nanoflakes/BTO/Cu₂O), the photoelectrode is endowed with a renewable PCC electric field, as a sustaining driving force, to guarantee the realization of directional separation of charge carrier (DSCC) strategy in PEC bioanalysis. The enduring PCC electric field can attract the electrons of Cu₂O and holes of WO₃, respectively, thereby regulating the directional migration of charge carriers and achieving an enhanced PEC photocurrent for the ultrasensitive quantification based on the highly efficient separation of electron-hole pairs. Consequently, with respect to WO₃ nanoflakes/Cu₂O and WO₃ nanoflakes photoelectrode, the polarized WO₃ nanoflakes/BTO/Cu₂O photoelectrode exhibits 1.7 and 10.9 times higher photocurrent density, respectively. Benefiting from this, the prominent photocurrent density is obtained which is extremely beneficial for enhancing the sensitivity of PEC bioanalysis. Ultimately, the ultrasensitive detection of model prostate specific antigen (PSA) is realized and presents a linear range of 0.1 pg/mL-50 ng/mL with the detection limitation of 0.036 pg/mL. This work provides the basis for understanding the role of the polarized electric field induced by ferroelectric in tuning the charge separation as well as insights on strategies for constructing high-performance paper-based PEC bioanalysis.

Smart phone assisted, rapid, simplistic, straightforward and sensitive biosensing of cysteine over other essential amino acids by β-cyclodextrin functionalized gold nanoparticles as a colorimetric probe

Herein, we have attempted the synthesis of β-CD functionalized AuNPs and then applied them as a colorimetric assay for the quantification of Cys over other different essential amino acids.

Laser-induced nano-bismuth decorated CdS–graphene hybrid for plasmon-enhanced photoelectrochemical analysis

Direct-laser-writing of a plasmonic Bi⁰-based hybrid photoelectrode with a significantly amplified and stable photocurrent response is successfully demonstrated to provide a highly sensitive PEC sensing platform.

A surface plasmon resonance enhanced photoelectrochemical immunoassay based on perovskite metal oxide@gold nanoparticle heterostructures

A visible light-driven photoelectrochemical immunoassay was designed for PSA detection by using perovskite metal oxide@gold nanoparticle heterostructures.

Ultrasensitive photoelectrochemical microRNA biosensor based on doxorubicin sensitized graphitic carbon nitride assisted by a target-activated enzyme-free DNA walker

Herein, a photoelectrochemical biosensor was constructed based on a sensitization strategy of doxorubicin sensitized graphitic carbon nitride for ultrasensitive detection of microRNA-141 assisted by a target-activated enzyme-free DNA walker.

Paper-Based Origami Photoelectrochemical Sensing Platform with TiO2/Bi4NbO8Cl/Co-Pi Cascade Structure Enabling of Bidirectional Modulation of Charge Carrier Separation

A bidirectional modulation of photoinduced charge carrier separation strategy based on TiO₂/Bi₄NbO₈Cl/Co-Pi was proposed in microfluidic paper based photoelectrochemical analytical device (μ-POAD). Perovskite Bi₄NbO₈Cl with high charge carrier mobility was employed as visible light absorber, sandwiching between electron transporting material (ETM) and hole transporting material (HTM). Paper based TiO₂ nanosheet arrays (PTNAs) serve as the ETM to provide a direct pathway for electron transport and Co-Pi works as the HTM to extract holes. Driven by a built-in electric field, the generated electrons of Bi₄NbO₈Cl are extracted by PTNAs, while holes are drawn toward Co-Pi, achieving efficient carrier separation. Remarkably, it is the first time that the HTM was introduced into μ-POAD to efficiently output holes and enhance the sensitivity. With the aid of ETM and HTM, 2.59 and 14.6 times higher photocurrent density was obtained compared with PTNAs/Bi₄NbO₈Cl and Bi₄NbO₈Cl photoelectrode, respectively. Benefiting from this dramatic photocurrent signal, ultrasensitive detection of β human chorionic gonadotrophin is realized with the linear range of 0.01-3000 IU L^-1 and detection limitation of 0.005 IU L^-1. This work demonstrates the importance of efficient carrier separation to the sensitivity of μ-POAD and paves the way for developing a high-performance analytical device.

Hierarchical CuInS2-based heterostructure: Application for photocathodic bioanalysis of sarcosine

In this study, on the basis of hierarchical CuInS₂-based heterostructure, a novel cathodic photoelectrochemical (PEC) enzymatic bioanalysis of the sarcosine detection was reported. Specifically, heterostructured CuInS₂/NiO/ITO photocathode was prepared and sarcosine oxidases (SOx) were integrated for the construction of the enzymatic biosensor. In the bioanalysis, the O₂-dependent suppression of the cathodic photocurrent can be observed due to the competition between the as-fabricated O₂-sensitive photocathode and the SOx-catalytic event toward O₂ reduction. Based on the sarcosine-controlled O₂ concentration, a novel photocathodic enzymatic biosensor could be realized for the sensitive and specific sarcosine detection. This work manifested the great potential of CuInS₂-based heterostructure as a novel platform for future PEC bioanalytical development and also a PEC method for sarcosine detection, which could be easily extended to numerous other enzymatic systems and to our knowledge has not been reported. This work is expected to stimulate more interest in the design and implementation of numerous CuInS₂-based heterostructured photocathodic enzymatic sensing.

Gold Nanoparticles Decorated Hematite Photoelectrode for Sensitive and Selective Photoelectrochemical Aptasensing of Lysozyme

Photoelectrochemical aptasensor (PECAS) is a new and promising detection platform with both high sensitivity and good selectivity. Exploration of new photoelectrode materials and establishment of effective charge transfer channel between photoelectrode and aptamer are the main challenges in this field. In this work, an efficient PECAS based on Au nanoparticles (NPs) decorated Fe₂O₃ nanorod photoelectrode is rationally designed, fabricated, and exhibited excellent sensitivity and selectivity for detection of lysozyme (Lys) with an ultralow detection limit of 3 pM and wide detection range from 10 pM to 100 nM. The Au NPs not only act as anchor to establish an efficient charge transfer channel between the photoelectrode and the aptamer, but also help to enhance the PEC performance through adjusting the carrier density of Fe₂O₃. The rationally designed photoelectrode opens up a distinctive avenue for promoting the PECAS to be a versatile analysis method.