Aggregation-Switching Strategy for Promoting Fluorescent Sensing of Biologically Relevant Species: A Simple Near-Infrared Cyanine Dye Highly Sensitive and Selective for ATP

Advancements in molecular disassembly of optical probes: a paradigm shift in sensing, bioimaging, and therapeutics

The majority of self-assembled fluorescent dyes suffer from aggregation-caused quenching (ACQ), which detrimentally affects their diagnostic and therapeutic effectiveness. While aggregation-induced emission (AIE) active dyes offer a promising solution to overcome this limitation, they may face significant challenges as the intracellular environment often prevents aggregation, leading to disassembly and posing challenges for AIE fluorogens. Recent progress in signal amplification through the disassembly of ACQ dyes has opened new avenues for creating ultrasensitive optical sensors and enhancing phototherapeutic outcomes. These advances are well-aligned with cutting-edge technologies such as single-molecule microscopy and targeted molecular therapies. This work explores the concept of disaggregation-induced emission (DIE), showcasing the revolutionary capabilities of DIE-based dyes from their design to their application in sensing, bioimaging, disease monitoring, and treatment in both cellular and animal models. Our objective is to provide an in-depth comparison of aggregation versus disaggregation mechanisms, aiming to stimulate further advancements in the design and utilization of ACQ fluorescent dyes through DIE technology. This initiative is poised to catalyze scientific progress across a broad spectrum of disciplines.

Effect of hydrophilicity-imparting substituents on exciton delocalization in squaraine dye aggregates covalently templated to DNA Holliday junctions

Molecular aggregates exhibit emergent properties, including the collective sharing of electronic excitation energy known as exciton delocalization, that can be leveraged in applications such as quantum computing, optical information processing, and light harvesting. In a previous study, we found unexpectedly large excitonic interactions (quantified by the excitonic hopping parameter Jm,n) in DNA-templated aggregates of squaraine (SQ) dyes with hydrophilic-imparting sulfo and butylsulfo substituents. Here, we characterize DNA Holliday junction (DNA-HJ) templated aggregates of an expanded set of SQs and evaluate their optical properties in the context of structural heterogeneity. Specifically, we characterized the orientation of and Jm,n between dyes in dimer aggregates of non-chlorinated and chlorinated SQs. Three new chlorinated SQs that feature a varying number of butylsulfo substituents were synthesized and attached to a DNA-HJ via a covalent linker to form adjacent and transverse dimers. Various characteristics of the dye, including its hydrophilicity (in terms of log Po/w) and surface area, and of the substituents, including their local bulkiness and electron withdrawing capacity, were quantified computationally. The orientation of and Jm,n between the dyes were estimated using a model based on Kühn-Renger-May theory to fit the absorption and circular dichroism spectra. The results suggested that adjacent dimer aggregates of all the non-chlorinated and of the most hydrophilic chlorinated SQ dyes exhibit heterogeneity; that is, they form a mixture of dimers subpopulations. A key finding of this work is that dyes with a higher hydrophilicity (lower log Po/w) formed dimers with smaller Jm,n and large center-to-center dye distance (Rm,n). Also, the results revealed that the position of the dye in the DNA-HJ template, that is, adjacent or transverse, impacted Jm,n. Lastly, we found that Jm,n between symmetrically substituted dyes was reduced by increasing the local bulkiness of the substituent. This work provides insights into how to maintain strong excitonic coupling and identifies challenges associated with heterogeneity, which will help to improve control of these dye aggregates and move forward their potential application as quantum information systems.

Dual-signal fluorescence aptasensing system for adenosine triphosphate assisting by MoS2 nanosheets

Adenosine triphosphate (ATP) has an irreplaceable role in the maintenance of many physiological processes and biological functions, and can be employed as an indicator of many diseases. In this work, we constructed a simple and sensitive dual-signal fluorescence aptasensing system for ATP detection with berberine as the signal reporter, ATP-aptamer as the recognition unit and MoS2 nanosheets as the signal amplification. In the absence of ATP, berberine can bind to the single-stranded DNA (ssDNA) of ATP-aptamer and selectively assemble on the surface of MoS2 nanosheets, leading to the fluorescence quenching of bererbine based on the fluorescence resonance energy transfer, denoted by "OFF". Accordingly, the fluorescence anisotropy signal is enhanced due to restriction on rotate of the fluorescent probe and denoted as "ON". Conversely, in the presence of ATP, it specifically interacts with ATP-aptamer and switches the free-curled single-stranded of ATP-aptamer to the G-quadruplex structure of ATP-aptamer/ATP/berberine, causing the detachment from the surface of the MoS2 nanosheet. Accordingly, the fluorescence signal was reversed from "OFF" to "ON", and the fluorescence anisotropy signal was turned "ON" to "OFF". The developed aptasensing system achieved a desirable sensitivity of 40.0 nM with fluorescent mode, and of 20.8 nM with fluorescent anisotropic mode. The sensing system has demonstrated high quality detection performance in human serum sample, and obtained the satisfactory recovery results for fluorescent of 93.0-108.5%, fluorescent anisotropic of 96.4-106.7%.

Biosensors with Boronic Acid-Based Materials as the Recognition Elements and Signal Labels

It is of great importance to have sensitive and accurate detection of cis-diol-containing biologically related substances because of their important functions in the research fields of metabolomics, glycomics, and proteomics. Boronic acids can specifically and reversibly interact with 1,2- or 1,3-diols to form five or six cyclic esters. Based on this unique property, boronic acid-based materials have been used as synthetic receptors for the specific recognition and detection of cis-diol-containing species. This review critically summarizes the recent advances with boronic acid-based materials as recognition elements and signal labels for the detection of cis-diol-containing biological species, including ribonucleic acids, glycans, glycoproteins, bacteria, exosomes, and tumor cells. We also address the challenges and future perspectives for developing versatile boronic acid-based materials with various promising applications.

Mitochondrial-Targeted AIE-Active Fluorescent Probe Based on Tetraphenylethylene Fluorophore with Dual Positive Charge Recognition Sites for Monitoring ATP in Cells

Adenosine triphosphate (ATP), as an important intracellular energy currency produced in mitochondria, is closely related to various diseases in living organisms. Currently, the biological application of AIE fluorophore as a fluorescent probe for ATP detection in mitochondria is rarely reported. Herein, D-π-A and D-A structure-based tetraphenylethylene (TPE) fluorophores were employed to synthesize six different ATP probes (P1-P6), and the phenylboronic acid groups and dual positive charge sites of probes could interact with the vicinal diol of ribose and negatively charged triphosphate structure of ATP, respectively. However, P1 and P4 with a boronic acid group and a positive charge site had poor selectivity for ATP detection. In contrast, P2, P3, P5, and P6 with dual positive charge sites exhibited better selectivity than P1 and P4. In particular, P2 had more advantages of high sensitivity, selectivity, and good time stability for ATP detection than P3, P5, and P6, which was ascribed to its D-π-A structure, linker 1 (1,4-bis(bromomethyl)benzene), and dual positive charge recognition sites. Then, P2 was employed to detect ATP, and it exhibited a low detection limit of 3.62 μM. Moreover, P2 showed utility in the monitoring of mitochondrial ATP level fluctuations.

A near-infrared fluorescent nanoprobe for senescence-associated β-galactosidase sensing in living cells

A near-infrared fluorescent nanoprobe based on semiconducting polymer nanoparticles (SPNs) for the detection of senescence-associated β-gal (SA-β-gal) is developed. Benefiting from the intrinsic lysosome-locating feature, this probe can be successfully used for the visualization of SA-β-gal in living cells.

A turn on fluorescent assay for real time determination of β-galactosidase and its application in living cell imaging

In recent years, fluorescent probes based on chemical reactions have been widely investigated as a powerful and noninvasive method for the diagnosis of diseases. β-Galactosidase (β-gal), a typical lysosomal glycosidase, over expressed in senescent cells and primary ovarian cancer cells, which has been considered as an important biomarker cell senescence and primary ovarian cancers. Fluorescent probes for the determination of β-gal provide an excellent choice for visualization of cell senescence. In this work, a turn on fluorescent probe (HBT-gal) for β-gal activity was developed based on the enzymatic hydrolysis of glycosidic bonds. HBT-gal showed little fluorescence in aqueous buffer excited at 415 nm, while emitted green fluorescence centered at ∼ 492 nm upon incubated with β-gal. The sensing scheme showed high selectivity and sensitivity for β-gal activity with a limit of detection calculated as low as 0.19 mU/mL. Moreover, HBT-gal was successfully applied to image β-gal activity in senescent Hep G2 cells treated with H₂O₂. Therefore, probe HBT-gal demonstrated a potential usage for the determination of cell senescence using β-gal as a biomarker.

A Dual-Control Strategy by Phosphate Ions and Local Microviscosity for Tracking Adenosine Triphosphate Metabolism in Mitochondria and Cellular Activity Dynamically

Adenosine triphosphate (ATP) acts as the main energy source for growth and development in organisms, and the disorder reflects the mitochondrial damage to a large extent. Therefore, an efficient tool for the evaluation of the ATP metabolic level is important to track mitochondrial health, providing an additional perspective for an in-depth long-term study on living activities. Herein, a twisted intramolecular charge transfer (TICT) framework is utilized to build up a sensitive receptor, Mito-VP, with a negligible background to target mitochondrial ATP metabolism by monitoring the phosphate ion (Pi) level upon ATP hydrolysis under the overall consideration of the structural and functional features of mitochondria. The responsive fluorescence could be lighted on under the dual control of Pi and local microviscosity, and the two steps of ATP hydrolysis could be captured through fluorescence. In addition to the well-behaved mitochondrial targeting, the energy metabolism at cellular and organism levels has been clarified via mitosis and zebrafish development, respectively.

Fluorescent Determination of Butyrylcholinesterase Activity and Its Application in Biological Imaging and Pesticide Residue Detection

Butyrylcholinesterase (BChE) is an essential human cholinesterase relevant to liver conditions and neurodegenerative diseases, which makes it a pivotal biomarker of health. It therefore remains challenging and highly desired to elaborate efficient chemical tools for BChE with simple operations and satisfactory working performance. In this work, a background-free detection strategy was built by virtue of the judicious coupling of a specific BChE-enzymatic reaction and in situ cyclization. High sensitivity with a low limit of detection (LOD) of 0.075 μg/mL could be readily achieved from the blank background and the as-produced emissive indicators, and the specific reaction site contributed to the high selectivity over other bio-species even acetylcholinesterase (AChE). In addition to the multifaceted spectral experiments to verify the sensing mechanism, this work assumed comprehensive studies on the application. The bio-investigation ranged from cells to an organism, declaring a noteworthy prospect in disease diagnosis, especially for Alzheimer's disease (AD), a common neurodegenerative disease with over-expressed BChE. Moreover, its excellent work for inhibition efficacy elucidation was also proved with the accuracy IC₅₀ of tacrine for BChE (8.6 nM), giving rise to an expanded application for trace pesticide determination.

Subtle Structural Changes of Dyes Lead to Distinctly Different Fluorescent Behaviors in Cellular Context: The Role of G-Quadruplex DNA Interaction Using Coumarin-Quinazolinone Conjugates as a Case Study

Fluorogenic organic materials have gained tremendous attention due to their unique properties. However, only a few of them are suitable for bioimaging. Their different behaviors in organic and cellular environments hinder their application in bioimaging. Thus understanding the photoluminescent behaviors of organic materials in a cellular context is particularly important for their rational design. Herein, we describe two coumarin-quinazolinone conjugates: CQ and MeCQ. The high structure similarity makes them possess similar physical and photophysical properties, including bright fluorescence ascribed to the monomer forms in organic solvents and aggregation-caused quenching (ACQ) effect due to self-assembly aggregation in aqueous solution. However, they behave quite differently in cellular context: that is, CQ exhibits bright fluorescence in living cells, while the fluorescence of MeCQ is almost undetectable. The different performance between CQ and MeCQ in living cells is attributed to their different scenario in G-quadruplex (G4) DNA interaction. CQ selectively binds with G4 DNA to recover its fluorescence via aggregation-disaggregation switching in living cells, while MeCQ remained in the aggregate form due to its poor interplay with G4 DNA. Furthermore, CQ is applied as a two-photon fluorescent dye, and its photoswitchable fluorescence capability is exploited for super-resolution imaging of the specific mitochondrial structure in living cells via the STORM technique.

Aggregation-based fluorescence amplification strategy: "turn-on" sensing of aminoglycosides using near-IR carbocyanine dyes and pre-micellar surfactants

This study is aimed at developing sensing schemes without obtaining selective receptors. A series of simple carbocyanine dyes was synthesized, whose emission was quenched in water with formation of nanoparticles in the range of 20-100 nm. Fluorescence in near-IR region is "turned on" in the presence of a drug cation of middle molecular weight (400-700 Da) and sodium dodecyl sulfate (SDS), as well as anionic drugs and a cationic surfactant (cetyltrimethylammonium bromide, CTAB). Aggregates (clusters) up to 100-200 nm in size were detected using dynamic light scattering (DLS) and Rayleigh light scattering (RLS) techniques in the systems: cationic analyte-SDS, carbocyanine dye-CTAB, and in all brightly fluorescent ternary systems dye-surfactant-analyte. Small ions (<200 Da) incapable of multi-point binding do not form the aggregates or cause the emission enhancement. The "turn-on" signal is only observed at the surfactant submicellar concentrations insufficient to solubilize the dye nanoparticles. Based on these findings, we suggest a rapid and simple method for the detection of ≥4·10^-5 mol/L of neomycin in urine. The proposed strategy paves the way for developing more selective methods.

A near-infrared-II fluorescence anisotropy strategy for separation-free detection of adenosine triphosphate in complex media

Fluorescence anisotropy (FA) has been widely applied for detecting and monitoring special targets in life sciences. However, matrix autofluorescence restricted its further application in complex biological samples. Herein, we report a near-infrared-II (NIR-II) FA strategy for detecting adenosine triphosphate (ATP) in human serum samples and breast cancer cell lysate, which employed NIR-II fluorescent Ag₂Se quantum dots (QDs) as tags to reduce matrix autofluorescence effect and applied graphene oxide (GO) to enhance fluorescence anisotropy signals. In the presence of ATP, the recognition between NIR-II Ag₂Se QDs labeled aptamer (QD-pDNA) and ATP led to the release of QD-pDNA from GO, resulting in the obvious decrease of FA values. ATP could be quantitatively detected in concentrations ranged from 3 nM to 2500 nM, with a detection limit down to 1.01 nM. This study showed that the developed NIR-II FA strategy could be applied for detecting targets in complex biological samples and had great potential for monitoring interactions between biomolecules in biomedical research.

A dual-function oligonucleotide-based ratiometric fluorescence sensor for ATP detection

Adenosine triphosphate (ATP) is the main energy currency of life that plays a vital role in supporting physiological activities in living organisms, including humans. Therefore, accurate and sensitive detection of ATP concentration is necessary in biochemical research and clinical diagnosis. Herein, a ratiometric fluorescence aptasensor was developed for ATP detection. A dual-function DNA strand comprising an ATP-binding aptamer (ABA) and berberine-binding aptamer (BBA) was designed and optimized, in which ABA can capture ATP and thioflavin T (ThT), whereas BBA can capture berberine. Interestingly, the fluorescence intensity of both berberine and ThT were enhanced as they were captured by this dual-function DNA strand. In the presence of ATP, the ABA on the 3'-end of the DNA bound specifically to its target, causing ThT release and a significant drop in ThT fluorescence. However, ATP had no significant effect on the interaction between berberine and DNA, remaining the enhanced fluorescence intensity of berberine stable. Based on this interesting phenomenon, a ratiometric fluorescence sensor was constructed that used the enhanced fluorescence intensity of berberine as reference to measure the fluorescence intensity of ThT for ATP detection. This ratiometric fluorescence strategy had excellent selectivity and high sensitivity towards ATP with a detection limit (3σ) as low as 24.8 nM. The feasibility of application of this method in biological samples was evaluated in human serum and urine samples, where it exhibited a good detection performance.

Near-infrared heptamethine cyanines (Cy7): from structure, property to application

Heptamethine cyanine dyes (Cy7) have attracted much attention in the field of biological application due to their unique structure and attractive near infrared (NIR) photophysical properties.

A bi-component supramolecular gel for selective fluorescence detection and removal of Hg2+ in water

A bi-component supramolecular gel (RQ) was successfully constructed by the assembly of the gelators 4-aminophenyl functionalized naphthalimide derivative (R) and tri-(pyridine-4-yl)-functionalized trimesic amide (Q) in DMSO-H2O (6.1 : 3.9, v/v) binary solution. The gel RQ exhibits excellent self-healing capacity. Interestingly, the RQ could fluorescently detect and reversibly remove Hg2+ from water through cation-π interactions with high selectivity, efficient adsorption and quick response. The limit of lowest detection (LOD) of the RQ for Hg2+ is 4.52 × 10-8 M and the separation ratio is 91.14%. Moreover, the RQ could be efficiently recycled and regenerated with little loss via a simple treatment by I-. Notably, thin films based on RQ and RQ + Hg2+ were prepared, which could serve as convenient and efficient test tools for the detection of Hg2+ and I-, respectively. This work provided an efficient method and novel supramolecular gel material for the separation and detection of Hg2+.

A fluorescent turn-on probe based on isophorone for the rapid detection of alkaline phosphatase and its application in bioimaging

Biological species analyses on account of fluorescence detection technology are receiving increasing attention, because they combine the advantages both powerful detection capability and excellent imaging technology. By effectively integrating isophorone and phosphate group via p-hydroxybenzaldehyde, the alkaline phosphatase (ALP) detection probe was obtained. Based on the enzyme-catalyzed dephosphorization course, phosphate group was separated from the probe by ALP and released yellow fluorescence signal. Upon addition with ALP, the probe exhibited high selectivity, short response time (6 min) and longer emission peak shift (570 nm). Furthermore, bioimaging experiment results indicated that the probe could detect endogenous ALP effectively.

Surfactant Aggregates Encapsulating and Modulating: An Effective Way to Generate Selective and Discriminative Fluorescent Sensors

The heterogeneous structure and dynamic balancing nature of surfactant aggregates make them attractive in developing fluorescent sensors. They can provide a number of advantages, e.g., enhanced fluorescence stability and quantum yield, detection capability in aqueous solutions, and easy operation. Thus, various strategies have been used to construct surfactant aggregate-based fluorescent sensors. Surfactant aggregates play various roles in different strategies and realize multiple sensing behaviors. Many new functions have been discovered for surfactant aggregates in constructing fluorescent sensors. In this feature article, we briefly summarize the development of surfactant aggregate-based fluorescent sensors and their applications in three different types of sensing: selective sensing, multiple analyte sensing, and cross-reactive sensing. For each type of sensing, the design strategies and the roles of surfactant aggregates are particularly introduced. An understanding of these aspects will help to expand the applications of surfactant assemblies in the sensing field.

A colorimetric and near -infrared ratiometric fluorescent probe for the determination of endogenous tyrosinase activity based on cyanine aggregation

A ratiometric fluorescent probe for TYR activity with high sensitivity was developed based on the H-aggregation of a cyanine dye.

ESIPT-based fluorescent probe for cysteine sensing with large Stokes shift over homocysteine and glutathione and its application in living cells

An HBT-based fluorescent probe for Cys with a large Stokes shift and high selectivity was developed that operates by the ESIPT process.

Near-infrared mito-specific fluorescent probe for ratiometric detection and imaging of alkaline phosphatase activity with high sensitivity

A NIR ratiometric fluorescent probe based on cyanine dye was developed for detecting and intracellular imaging of ALP activity with high sensitivity.

Chimeric Aptamers-Based and MoS2 Nanosheet-Enhanced Label-Free Fluorescence Polarization Strategy for Adenosine Triphosphate Detection

Adenosine triphosphate (ATP) as a primary energy source plays a unique role in the regulation of all cellular events. The necessity to detect ATP requires sensitive and accurate quantitative analytical strategies. Herein, we present our study of developing a MoS₂ nanosheet-enhanced aptasensor for fluorescence polarization-based ATP detection. A bifunctional DNA strand was designed to consist of chimeric aptamers that recognize and capture ATP and berberine, a fluorescence enhancer. In the absence of ATP, the DNA strand bound to berberine will be hydrolyzed when Exonuclease I (Exo I) is introduced, releasing berberine as a result. In contrast, when ATP is present, ATP aptamer folds into a G-quadruplex structure; thus, the complex can resist degradation by Exo I to maintain berberine for fluorescent detection purpose. In addition, to magnify the fluorescence polarization (FP) signal, MoS₂ nanosheets were also adopted in the system. This nanosheets-enhanced FP strategy is simple and facile which does not require traditional dye-labeled DNA strands and complex operation steps. The developed fluorescence polarization aptasensor showed high sensitivity for the quantification of ATP with a detection limit of 34.4 nM, performing well both in buffer solution and in biological samples.

New detection method for nucleoside triphosphates based on carbon dots: The distance-dependent singlet oxygen trapping

The distance-dependent based sensing mechanism, such as fluorescence resonance energy transfer (FRET) and surface plasmon resonance (SPR) absorption of gold nanoparticles, has been used widely in visual detection. In this work, we report another distance-dependent detection method for nucleoside triphosphates (NTPs) based on carbon dots (CDs) (¹O₂ donor) and 9, 10-diphenylanthracene-2-boronic acid (DABA, ¹O₂ acceptor). The CDs can generate singlet oxygen (¹O₂) which allows diffusion within 200 nm. Thus, the distance between CDs and DABA decreased through binding of NTPs (<200 nm), leading to absorption changes of DABA under light irradiation due to ¹O₂ trapping. This sensing system (CDs@DABA) has high selectivity for the detection of NTPs due to the double molecular recognition and a linear response in the 0-80 μM concentration range was accomplished with the detection limit as low as 4.35 μM.

Development of Dipicolylamine-Modified Cyclodextrins for the Design of Selective Guest-Responsive Receptors for ATP

The construction of supramolecular recognition systems based on specific host–guest interactions has been studied in order to design selective chemical sensors. In this study, guest-responsive receptors for ATP have been designed with cyclodextrins (CyDs) as a basic prototype of the turn-on type fluorescent indicator. We synthesized dipicolylamine (DPA)-modified CyD–Cu²⁺ complexes (Cu·1α, Cu·1β, and Cu·1γ), and evaluated their recognition capabilities toward phosphoric acid derivatives in water. The UV-Vis absorption and fluorescence spectra revealed that Cu·1β selectively recognized ATP over other organic and inorganic phosphates, and that β-CyD had the most suitable cavity size for complexation with ATP. The 1D and 2D NMR analyses suggested that the ATP recognition was based on the host–guest interaction between the adenine moiety of ATP and the CyD cavity, as well as the recognition of phosphoric moieties by the Cu²⁺–DPA complex site. The specific interactions between the CyD cavity and the nucleobases enabled us to distinguish ATP from other nucleoside triphosphates, such as guanosine triphosphate (GTP), uridine triphosphate (UTP), and cytidine triphosphate (CTP). This study clarified the basic mechanisms of molecular recognition by modified CyDs, and suggested the potential for further application of CyDs in the design of highly selective supramolecular recognition systems for certain molecular targets in water.

Disassembly-driven signal turn-on probes for bimodal detection of DNA with 19F NMR and fluorescence

Self-assembling molecular probes that can detect DNA in a ¹⁹F NMR and fluorescence signal turn-on manner were successfully developed.

ATP-Activatable Photosensitizer Enables Dual Fluorescence Imaging and Targeted Photodynamic Therapy of Tumor

Targeted delivery of intracellular stimuli-activatable photosensitizers (PSs) into tumor cells to achieve selective imaging and on-demand photodynamic therapy (PDT) of tumors has provided a vital opportunity for precise cancer diagnosis and therapy. In this paper, we report a tumor targeting and adenosine triphosphate (ATP)-activatable nanophotosensitizer Apt-HyNP/BHQ₂ by modifying hybrid micellar nanoparticles with both nucleolin-targeting aptamer AS1411 and quencher BHQ₂-labeled ATP-binding aptamer BHQ₂-ATP-apt. We demonstrated that both of the fluorescence emissions at 555 and 627 nm were quenched by BHQ₂ in Apt-HyNP/BHQ₂, resulting in low PDT capacity. After selective entry into tumor cells through nucleolin-mediated endocytosis, the high concentration of intracellular ATP could bind to BHQ₂-ATP-apt and trigger Apt-HyNP/BHQ₂ dissociation, leading to turning "on" both fluorescence and PDT. The "off-on" fluorescence emissions at both 555 and 627 nm were successfully applied for dual color fluorescence imaging of endogenous ATP levels and real-time monitoring of intracellular activation of Apt-HyNP/BHQ₂ in tumor cells. Moreover, imaging-guided precise PDT of tumors in living mice was also demonstrated, allowing for selective ablation of tumors without obvious side effects. This study highlights the potential of using a combination of tumor-targeting and ATP-binding aptamers to design ATP-activatable PSs for both fluorescence imaging and imaging-guided PDT of tumors in vivo.