Sodium-Selective Fluoroionophore-Based Optodes for Seawater Salinity Measurement

In Situ Continuous Measurement of Salinity in Estuarine and Coastal Sediments by All-Solid Potentiometric Sensors

Salinity is crucial for understanding the environmental and ecological processes in estuarine and coastal sediments. In situ measurements in sediments are scarce due to the low water content and particulate adsorption. Here, a new potentiometric sensor principle is proposed for the real-time in situ measurement of salinity in sediments. The sensor system is based on paper sampling and two all-solid electrodes, a cation-selective electrode (copper hexacyanoferrate, CuHCF) and an anion-selective electrode (Ag/AgCl). The spontaneous aqueous electrolyte extraction and redox reaction can produce a Nernstian response on both electrodes that is directly related to salinity. This potentiometric sensor allows for salinity acquisition in a wide salinity range (1-50 ppt), with high resolution (<1 ppt), and at a low water content (<30%), and it has been applied for the in situ measurement of salinity and the interpretation of cycling processes of metals in estuarine and coastal sediments. Moreover, the sensor coupled to a wireless monitoring system exhibited remote-sensing capability and successfully captured the salinity dynamic processes of the overlying water and pore water during the tidal period. This sensor with its low cost, versatility, and applicability represents a valuable tool to advance the comprehension of salinity and the salinity-driven dissolved-matter variations in estuarine and coastal sediments.

Optical Detection of Heparin in Whole Blood Samples Using Nanosensors Embedded in an Agarose Hydrogel

Point-of-care quantification of the anticoagulant heparin still remains a significant clinical challenge as the reference method (colorimetric anti-factor Xa assay) cannot be performed in whole blood. Our group recently put forth the novel optical nanosensing principle using an ionic solvatochromic dye as a signal transducer. These nanosensors demonstrated significantly improved selectivity and sensitivity compared to ion-exchange-type polyion nanosensors and enabled protamine/heparin quantification in blood plasma samples. However, because the readout is absorbance-based, they are still not suitable for whole blood measurements. To overcome the background absorbance of blood, the nanosensors were here embedded in an agarose hydrogel capable of filtering out red blood cells while allowing plasma components to diffuse into the gel. Calibration curves for both protamine and heparin were successfully obtained in buffer, undiluted plasma, and undiluted whole blood using different colorimetric image analysis methods and a simple experimental setup.

Fluorescent Molecular Logic Gates and Pourbaix Sensors in Polyacrylamide Hydrogels

Polyacrylamide hydrogels formed by free radical polymerisation were formed by entrapping anthracene and 4-amino-1,8-naphthalimide fluorescent logic gates based on photoinduced electron transfer (PET) and/or internal charge transfer (ICT). The non-covalent immobilisation of the molecules in the hydrogels resulted in semi-solid YES, NOT, and AND logic gates. Two molecular AND gates, examples of Pourbaix sensors, were tested in acidic aqueous methanol with ammonium persulfate, a strong oxidant, and displayed greater fluorescence quantum yields than previously reported. The logic hydrogels were exposed to aqueous solutions with chemical inputs, and the fluorescence output response was viewed under 365 nm UV light. All of the molecular logic gates diffuse out of the hydrogels to some extent when placed in solution, particularly those with secondary basic amines. The study exemplifies an effort of taking molecular logic gates from homogeneous solutions into the realm of solid-solution environments. We demonstrate the use of Pourbaix sensors as pE-pH indicators for monitoring oxidative and acidic conditions, notably for excess ammonium persulfate, a reagent used in the polymerisation of SDS-polyacrylamide gels.

Chip-Scale In Situ Salinity Sensing Based on a Monolithic Optoelectronic Chip

Salinity is an indispensable parameter for various applications such as biomedical diagnostics, environmental chemical analysis, marine monitoring, etc. Miniaturized salinity sensors have significant potential in portable applications in various scenarios and designs with highly desirable features of convenience, reliability, economy, and high sensitivity and also the capability of real-time measurements. Herein, we demonstrate a highly refractive index-sensitive sensor based on a microscale III-nitride chip that consists of a light emitter and a photodetector. This highly monolithically integrated chip shows an excellent sensitivity of salinity of 2606 nA/(mol/L) (or 446 nA/%) and a response time of 0.243 s. In addition, wireless communication technologies can be easily integrated with the sensing device, which enables automatic remote control for data collection and postprocessing. Remarkably, a polymer-based antifouling coating on the surface of the sensing chip has been established to significantly improve its long-term stability in mimicked marine water. The demonstrated ultrasensitive, ultracompact, cost-effective, fast response, wireless-compatible, and easy-to-use features endow the current device with a huge potential for in situ salinity sensing under varying environmental conditions.

Hydrogel-Based Optical Ion Sensors: Principles and Challenges for Point-of-Care Testing and Environmental Monitoring

Hydrogel is a unique family of biocompatible materials with growing applications in chemical and biological sensors. During the past few decades, various hydrogel-based optical ion sensors have been developed aiming at point-of-care testing and environmental monitoring. In this Perspective, we provide an overview of the research field including topics such as photonic crystals, DNAzyme cross-linked hydrogels, ionophore-based ion sensing hydrogels, and fluoroionophore-based optodes. As the different sensing principles are summarized, each strategy offers its advantages and limitations. In a nutshell, developing optical ion sensing hydrogels is still in the early stage with many opportunities lying ahead, especially with challenges in selectivity, assay time, detection limit, and usability.

Optode Based Chemical Imaging-Possibilities, Challenges, and New Avenues in Multidimensional Optical Sensing

Seeing is believing, as the saying goes, and optical sensors (so-called optodes) are tools that can make chemistry visible. Optodes react reversibly and quickly (seconds to minutes) to changing analyte concentrations, enabling the spatial and temporal visualization of an analyte in complex environments. By being available as planar sensor foils or in the form of nano- or microparticles, optodes are flexible tools suitable for a wide array of applications. The steadily grown applications of in particular oxygen (O₂) and pH optodes in fields as diverse as medical, environmental, or material sciences is proof for the large demand of optode based chemical imaging. Nevertheless, the full potential of this technology is not exhausted yet, challenges have to be overcome, and new avenues wait to be taken. Within this Perspective, we look at where the field currently stands, highlight several successful examples of optode based chemical imaging and ask what it will take to advance current state-of-the-art technology. It is our intention to point toward some potential blind spots and to inspire further developments.

Red-Emitting Fluorescence Sensors for Metal Cations: The Role of Counteranions and Sensing of SCN- in Biological Materials

The spatiotemporal sensing of specific cationic and anionic species is crucial for understanding the processes occurring in living systems. Herein, we developed new fluorescence sensors derived from tetrapyrazinoporphyrazines (TPyzPzs) with a recognition moiety that consists of an aza-crown and supporting substituents. Their sensitivity and selectivity were compared by fluorescence titration experiments with the properties of known TPyzPzs (with either one aza-crown moiety or two of these moieties in a tweezer arrangement). Method of standard addition was employed for analyte quantification in saliva. For K⁺ recognition, the new derivatives had comparable or larger association constants with larger fluorescence enhancement factors compared to that with one aza-crown. Their fluorescence quantum yields in the ON state were 18× higher than that of TPyzPzs with a tweezer arrangement. Importantly, the sensitivity toward cations was strongly dependent on counteranions and increased as follows: NO₃^- < Br^- < CF₃SO₃^- < ClO₄^- ≪ SCN^-. This trend resembles the chaotropic ability expressed by the Hofmeister series. The high selectivity toward KSCN was explained by synergic association of both K⁺ and SCN^- with TPyzPz sensors. The sensing of SCN^- was further exploited in a proof of concept study to quantify SCN^- levels in the saliva of a smoker and to demonstrate the sensing ability of TPyzPzs under in vitro conditions.

Nanoparticle-based fluoroionophore for analysis of potassium ion dynamics in 3D tissue models and in vivo

The imaging of real-time fluxes of K+ ions in live cell with high dynamic range (5-150 mM) is of paramount importance for neuroscience and physiology of the gastrointestinal tract, kidney and other tissues. In particular, the research on high-performance deep-red fluorescent nanoparticle-based biosensors is highly anticipated. We found that BODIPY-based FI3 K+-sensitive fluoroionophore encapsulated in cationic polymer RL100 nanoparticles displays unusually strong efficiency in staining of broad spectrum of cell models, such as primary neurons and intestinal organoids. Using comparison of brightness, photostability and fluorescence lifetime imaging microscopy (FLIM) we confirmed that FI3 nanoparticles display distinctively superior intracellular staining compared to the free dye. We evaluated FI3 nanoparticles in real-time live cell imaging and found that it is highly useful for monitoring intra- and extracellular K+ dynamics in cultured neurons. Proof-of-concept in vivo brain imaging confirmed applicability of the biosensor for visualization of epileptic seizures. Collectively, this data makes fluoroionophore FI3 a versatile cross-platform fluorescent biosensor, broadly compatible with diverse experimental models and that crown ether-based polymer nanoparticles can provide a new venue for design of efficient fluorescent probes.

A fluorescent combinatorial logic gate with Na+, H+-enabled OR and H+-driven low-medium-high ternary logic functions

A fluorescent combinatorial Na⁺, H⁺ logic gate is demonstrated that could represent a class of probes for investigating antiporters in biological systems.

Water-soluble, neutral 3,5-diformyl-BODIPY with extended fluorescence lifetime in a self-healable chitosan hydrogel

3,5-Diformyl-BODIPY cross-linked chitosan-based hydrogels exhibit fluorescence resonance energy transfer (FRET) dynamics, water solubility, self-healing ability and good values of BODIPY fluorescence lifetimes.