Development of Visible-Light Induced Photoelectrochemical Platform Based on Cyclometalated Iridium(III) Complex for Bioanalysis

A cathodic photoelectrochemical biosensor based on CRISPR/Cas12a trans-cleavage mediated p-n heterojunction quenching mode for microRNA determination

In this study, a cathodic photoelectrochemical (PEC) bioanalysis for sensitive determination of microRNA (miRNA) has been constructed based on CRISPR/Cas12a trans-cleavage mediated [(C6)₂Ir(dcbpy)]⁺PF₆^- (C6 represents coumarin-6 and dcbpy represents 4,4'-dicarboxyl-2,2'-bipyridine)-sensitized NiO photocathode and p-n heterojunction quenching mode. The [(C6)₂Ir(dcbpy)]⁺PF₆^--sensitized NiO photocathode exhibits a stable and dramatically improved photocurrent signal due to highly effective photosensitization of [(C6)₂Ir(dcbpy)]⁺ PF₆^-. Then Bi₂S₃ quantum dots (Bi₂S₃ QDs) is captured on the photocathode, resulting in markedly quenching of the photocurrent. When target miRNA is specifically recognized by the hairpin DNA to stimulate the trans-cleavage activity of CRISPR/Cas12a, leading to the leave of the Bi₂S₃ QDs. The photocurrent is gradually recovered with the increasing target concentration. Thus, the quantitative signal response to target is achieved. Benefiting from excellent performance of NiO photocathode, intense quenching effect of p-n heterojunction and accurate recognition ability of CRISPR/Cas12a, the cathodic PEC biosensor shows a wider linear range over 0.1 fM-10 nM, with a low detection limit of 36 aM. Also, the biosensor exhibits satisfying stability and selectivity.

Investigation of the N^C Ligand Effects on Emission Characteristics in a Series of Bis-Metalated [Ir(N^C)2(N^N)]+ Complexes

A series of bis-metalated phosphorescent [(N^C)2Ir(bipyridine)]+ complexes with systematic variations in the structure and electronic characteristics of the N^C ligands were synthesized and characterized by using elemental analysis, mass spectrometry, NMR spectroscopy and X-ray crystallography. Investigation of the complexes’ spectroscopic properties together with DFT and TD DFT calculations revealed that metal-to-ligand charge transfer (MLCT) and intraligand (LC) transition play key roles in the generation of emissive triplet states. According to the results of theoretical studies, the 3LC excited state is more accurate to consider as an intraligand charge transfer process (ILCT) between N- and C-coordinated moieties of the N^C chelate. This hypothesis is completely in line with the trends observed in the experimental absorption and emission spectra, which display systematic bathochromic shifts upon insertion of electron-withdrawing substituents into the N-coordinated fragment. An analogous shift is induced by expansion of the aromatic system of the C-coordinated fragment and insertion of polarizable sulfur atoms into the aromatic rings. These experimental and theoretical findings extend the knowledge of the nature of photophysical processes in complexes of this type and provide useful instruments for fine-tuning of their emissive characteristics.

Target-Synergized Biologically Mediated RAFT Polymerization for Electrochemical Aptasensing of Femtomolar Thrombin

The assay of thrombin levels is integral to the assessment of coagulation function and clinical screening of coagulation disorder-related diseases. In this work, we illustrate the ingenious use of the target-synergized biologically mediated reversible addition-fragmentation chain transfer (RAFT) polymerization (tsBMRP) as a novel amplification strategy for the electrochemical aptamer-based biosensing of thrombin at the femtomolar levels. Briefly, the tsBMRP-based strategy relies on the boronate affinity-mediated decoration of the glycan chain(s) of the target itself with RAFT agents and the subsequent recruitment of signal labels via BMRP, mediated by the direct reduction of RAFT agents by NADH into initiating/propagating radicals. Obviously, the tsBMRP-based strategy is biologically friendly, low-cost, and simple in operation. As thrombin is a glycoconjugate, its electrochemical aptasensing involves the use of the thrombin-binding aptamer (TBA) as the recognition receptor, the site-specific decoration of RAFT agents to the glycan chain of thrombin via boronate affinity, and further the recruitment of ferrocene signal labels via the BMRP of ferrocenylmethyl methacrylate (FcMMA). As boronate affinity results in the decoration of each glycan chain with tens of RAFT agents while BMRP recruits hundreds of signal labels to each RAFT agent-decorated site, the tsBMRP-based strategy allows us to detect thrombin at a concentration of 35.3 fM. This electrochemical aptasensor is highly selective, and its applicability to thrombin detection in serum samples has been further demonstrated. The merits of high sensitivity and selectivity, low cost, good anti-interference capability, and simple operation make the tsBMRP-based electrochemical thrombin aptasensor great promise in biomedical and clinical applications.

Nickel Single-Atom Catalyst-Mediated Efficient Redox Cycle Enables Self-Checking Photoelectrochemical Biosensing with Dual Photocurrent Readouts

Developing a self-checking photoelectrochemical biosensor with dual photocurrent signals could efficiently eliminate false-positive or false-negative signals. Herein, a novel biosensor with dual photocurrent responses was established for the detection of acetylcholinesterase activity. To achieve photocurrent polarity-switchable behavior, the iodide/tri-iodide redox couple was innovatively introduced to simultaneously consume the photoexcited electrons and holes, which circumvents the inconvenience caused by the addition of different hole- and electron-trapping agents in the electrolyte. Importantly, benefiting from the high catalytic activity, the enhanced photoelectric responsivity can be realized after decorating the counter electrode with nickel single-atom catalysts, which promotes a more efficient iodide/tri-iodide redox reaction under low applied voltages. It is envisioned that the proposed photocurrent polarity switching system offers new routes to sensitive and reliable biosensing.

Target-Induced In Situ Formation of Organic Photosensitizer: A New Strategy for Photoelectrochemical Sensing

Small-molecule photosensitizers have great application prospects in photoelectrochemical (PEC) sensing due to their defined composition, diversified structure, and adjustable photophysical properties. Herein, we propose a new strategy for PEC analysis based on the target-induced in situ formation of the organic photosensitizer. Taking thiophenol (PhSH) as a model analyte, we designed and synthesized a 2,4-dinitrophenyl (DNP)-caged coumarin precursor (Dye-PhSH), which was then covalently coupled onto the TiO₂ nanoarray substrate to obtain the working photoanode. Due to the intramolecular photoinduced electron transfer process, Dye-PhSH has only a very weak photoelectric response. Upon reacting with the target, Dye-PhSH undergoes a tandem reaction of the detachment of the DNP moiety and the intramolecular cyclization process, which leads to a coumarin dye with a pronounced photoelectric effect, thus achieving a highly selective turn-on PEC response to PhSH. For the first time, this study was to construct a PEC sensor by exploiting specific organic reactions for the in situ generation of small molecule-based photoactive material. It can be anticipated that the proposed strategy will expand the paradigm of PEC sensing and holds great potential for detecting various other analytes.

1,7-Di-tert-butyl-Substituted aza-BODIPYs by Low-Barrier Rotation to Enhance a Photothermal-Photodynamic Effect

1,7-Di-tert-butyl-substituted aza-BODIPYs (tBu-azaBDP) were successfully obtained for the first time. The structures of tBu-azaBDP and Ph-azaBDP were confirmed by X-ray crystal analysis, and tBu-azaBDP 2 is more twisted than Ph-azaBDP 5. tBu-azaBDPs have significant photo-stability and enhanced water solubility. tBu-azaBDPs possess excellent optical properties, such as high molar extinction coefficients, broad full width half maxima, and large Stokes shifts, which is comparable to those of the parent dye Ph-azaBDP. Although the low-barrier rotation of the distal -tBu groups in tBu-azaBDPs results in low quantum yield, photothermal conversion efficiency and singlet oxygen generation ability of tBu-azaBDPs are more effective than those of Ph-azaBDP, which is highly desirable for a photothermal-photodynamic therapy agent.

Gold Nanoparticles Photosensitization towards 3,4,9,10-Perylenetetracarboxylic Dianhydride Integrated with a Dual-Particle Three-Dimensional DNA Roller: A General "ON-OFF-ON" Photoelectric Plasmon-Enhanced Biosensor

A high initial signal for the sensitive detection of analytes is critical in photoelectrochemical (PEC) biosensing systems. As a semiconductor, 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) possesses an appropriate optical band gap of 2.5 eV and inherently intense and stable PEC response. When gold nanoparticles (Au NPs) are electrodeposited on the surface of PTCDA to form a Schottky junction (Au NPs/PTCDA), a surprising and satisfactory PEC performance is unfolded before our eyes. Considering the outstanding PEC behaviors of Au NPs/PTCDA and the great quenching effect of gold nanoclusters (Au NCs), the "ON-OFF-ON" PEC sensing platform has been developed for microRNA 1246 (miRNA 1246) detection combined with the cascaded quadratic amplification strategy of the polymerization/nicking reaction and dual-particle 3D DNA roller. The higher initial PEC signals of the system can be acquired by regulating the deposition time for 35 s (-0.2 V), which is derived from the synergetic effect of localized surface plasmon resonance of Au NPs and the formation of a Schottky junction. The dual-particle 3D DNA roller has been designed to guarantee wide walking space, remarkable operation performances, and inhibition of derailment. The proposed biosensor shows a dynamic range from 10 aM to 1 pM at a low detection limit of 3.1 aM and exhibits good analytical behaviors while analyzing miRNA 1246 in healthy human serum samples. This work not only expands the application of organic photoelectric materials in bioanalysis but also provides potential possibility of detecting other biomarkers by choosing appropriate target units.

3D NiO nanoflakes/carbon fiber meshwork: Facile preparation and utilization as general platform for photocathodic bioanalysis

Herein, we describe a customized approach for facile preparation of three-dimensional (3D) NiO nanoflakes (NFs)/carbon fiber meshwork (CFM) and its validation as a common photocathode matrix for photoelectrochemical (PEC) bioanalysis, which to our knowledge has not been reported. Specifically, 3D NiO NFs/CFM was fabricated by a sequential liquid phase deposition and annealing process, which was then characterized by scanning electron microscopy, X-ray photoelectron spectrum, UV-vis absorption spectra and N₂ adsorption-desorption measurement. Sensitized by BiOI and incorporated with an alkaline phosphatase (ALP)/tyrosinase (TYR) bi-enzyme cascade system, a sensitive split-type cathodic PEC bioanalysis for the determination of ALP was achieved. This method can detect ALP concentrations down to 3 × 10^-5 U L^-1 with a linear response range of 0.001-10 U L^-1. Moreover, this proposed system exhibited good selectivity, stability and excellent performance for real sample analysis. This research features the facile preparation of 3D NiO NFs/CFM that could acts as a universal matrix for photocathodic analysis, and is envisioned to stimulate more effort for advanced 3D photocathode for PEC bioanalysis and beyond.

In Situ Generation of Regularly Ordered 2D Ultrathin Covalent Organic Framework Films for Highly Sensitive Photoelectrochemical Bioanalysis

Developing new photoactive materials and electrode preparation technology with high stability, repeatability, easy fabrication, and a low electron-hole recombination rate is promising for ideal photoelectrochemical (PEC) biosensors, but it remains a great challenge. Here, a porous and crystalline oriented two-dimensional (2D) ultrathin covalent organic framework film (D-TA COF film) was formed in situ on indium-doped tin oxide (ITO) substrates under very mild conditions. The structure and morphology of D-TA COF film were characterized by means of Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and powder X-ray diffraction. Compared with the randomly oriented D-TA COF powder drop-coated on ITO, the photocurrent of the D-TA COF film grown on the ITO surface in situ achieved as high as ∼333-fold increase. This photocurrent can be further amplified by O₂ (acting as electron acceptors). Benefiting from the fabrication in situ, D-TA COF film also exhibited tough adhesion, assuring the film was difficult to separate from the electrode. Accordingly, D-TA COF film was applied as the photoactive material to build a PEC biosensor for H₂O₂ detection based on coupling with large amounts of catalase (CAT) through simple adsorption. The introduced CAT catalyzed the decomposition of H₂O₂ to O₂, leading to an enhancement of the photocurrent response. As a result, a "signal-on" PEC biosensor was fabricated with good sensitivity, rapid response, and high stability, and it can also detect H₂O₂ released from living cells. Taking into account these advantages, the D-TA COF film is expected to be an ideal photoactive material to construct various PEC biosensors, which as far as we know have not been reported.

Boosting the biocatalytic precipitation with enzyme-loaded liposomes: Toward a general platform for amplified photoelectrochemical immunoassay

Liposome-assisted photoelectrochemical (PEC) bioanalysis represents one of the latest frontiers in the arena of PEC bioanalysis. This work reports a general enzyme-amplified liposomal PEC bioanalysis protocol via the use of enzyme-loaded liposomes to boost the biocatalytic precipitation (BCP) effect. In the representative system, the horseradish peroxidase (HRP)-loaded liposome (HRPLL) and the Au nanoclusters (NCs)/Au nanoparticles (NPs)/TiO₂ nanotubes (NTs) framework (AATF) were used as liposomal label and photoelectrode, respectively. In the detection, the sandwich immunocomplex reaction was accomplished in a 96-well plate to confine the HRPLL label, which was then lysed to release the HRP molecules to initiate the BCP process. Due to the amplified formation of HRP-induced BCP on the AATF scaffold, the photo-current response correlated closely with the immunorecognition process and the analyte could be detected very sensitively. This work features the first integration of enzyme-loaded liposomes and the BCP for sensitive PEC bioanalysis, which to our knowledge has not been reported. With the use of various other enzymes, this work could serve as a general basis for the PEC bioanalysis of numerous other target of interest.

Magnetic-Optical Core-Shell Nanostructures for Highly Selective Photoelectrochemical Aptasensing

Selectivity is a crucial parameter for photoelectrochemical (PEC) sensing in a practical setting. Despite the use of specific probes such as aptamers, antibodies, and enzymes, coexisting interferences can still result in inaccuracies in PEC sensing, especially for complex biosample matrixes. Here we report the design of an Fe₃O₄@SiO₂@TiO₂ magnetic-optical bifunctional beacon applied in a novel PEC sensor that can selectively capture progesterone in complex biosamples, be magnetically separated and cleaned, and be detected in pure phosphate buffer solution (PBS). The magnetic separation strategy efficiently removes the complex coexisting species from the modified electrode surface and drastically enhances the selectivity of the as-designed PEC sensor. The as-designed PEC sensor is cost-effective, easy to fabricate, highly selective and sensitive, and highly reliable, making it a promising platform for efficient aptasensing.

Luminescent organic dyes containing a phenanthro[9,10-D]imidazole core and [Ir(N^C)(N^N)]+ complexes based on the cyclometalating and diimine ligands of this type

A family of diimine (N^N) and cyclometalating (N^C) ligands based on a phenanthro-imidazole aromatic system: 2-pyridyl-1H-phenanthro[9,10-d]imidazole (N^N); 2-R-1-phenyl-1H-phenanthro[9,10-d]imidazole, R = phenyl (N^C4), 3-iodophenyl (N^C5) and 4-nitrophenyl (N^C6) were prepared. It was found that N^C4 and N^C5 show π-π* fluorescence typical of aromatic systems of this sort, whereas the donor-acceptor architecture of N^C6 leads to strong emission solvatochromism and acidochromism, indicating the charge transfer character of the fluorescence observed. Six iridium(iii) complexes (1-6) [Ir(N^C#)2(N^N)]+, where # = 1-6 and N^C1 = 2-phenylpyridine, N^C2 = 2-(benzo[b]thiophen-2-yl)pyridine, and N^C3 = methyl 2-phenylquinoline-4-carboxylate, were also synthesized and characterized. The complexes obtained display moderate to bright phosphorescence with quantum yields up to 46% in degassed solution. The photophysical characteristics of 1-6 were studied in detail. DFT and TD DFT calculations were used for the assignment of electronic transitions responsible for the absorption and emission of these compounds. The variations in the cyclometalating ligand structure give rise to rich photophysics of the complexes obtained. It was found that the orbitals of both N^C and N^N ligands make a major contribution to the formation of emissive excited states and a delicate balance between the energy of the ligands' frontier orbitals determines the emission character.

A luminescent microRNA nanoprobe based on the target-triggered release of an iridium(III)-solvent complex from mesoporous silica nanoparticles

A luminescent microRNA nanoprobe based on the target-triggered Ir(III)-solvent complex release has been fabricated. The complex is initially embedded into mesoporous silica nanoparticles (MSNs), and then is capped by single-stranded (ss) DNA. In the presence of the target microRNA, the ssDNA hybridize with the microRNA forming a rigid DNA/RNA heteroduplexes and leaving the surface of MSN. Thus, the capped Ir(III) solvent complex is released and re-coordinated with histidine (His) to form a new luminescent complex. The luminescence intensity of the nascent complex (with excitation/emission maxima at 340/570 nm) is positively correlated with the concentrations of the target microRNA in the range from 0.05 to 2 nM, and the detection limit of microRNA is estimated as 0.2 pM (S/N = 3). The ability of this nanoprobe to detect microRNA in cell extract further demonstrates its potential in practical application. Graphical abstractSchematic of a luminescent microRNA nanoprobe based on the target-triggered release of an Ir(III)-solvent complex from mesoporous silica nanoparticles.

In Situ Generated Plasmonic Silver Nanoparticle-Sensitized Amorphous Titanium Dioxide for Ultrasensitive Photoelectrochemical Sensing of Formaldehyde

Trace concentration of formaldehyde can damage human health and environment. Consequently, it is of great significance to develop an ultrasensitive sensor for its determination. Herein, an ingenious and efficient photoelectrochemical sensor for formaldehyde was constructed by amorphous TiO₂ hollow spheres incorporated with Ag⁺ ions, which were brought about by silica template etching and then the exchange of Ag⁺/Na⁺ ions. The amorphous TiO₂ acted the dual role of Ag⁺ ion probe carriers and photoelectric materials. Upon exposure to the increased concentration of formaldehyde, the Ag nanoparticles were produced in situ, and photocurrent amplification was then achieved in a proportional manner. It is attributed to the injection of hot electrons from plasmonic Ag nanoparticles into the conduction band of amorphous titanium dioxide and therefore enhanced the photocurrent. The linear relationship between 1 and 400 pmol L^-1 resulted from the enhanced photocurrent and increased concentration of formaldehyde, and the detection limit was 0.4 pmol L^-1. Benefiting from an in situ and unique sensitization strategy, this photoelectrochemical sensor exhibited many advantages such as sensitivity, selectivity, cost-effectiveness, convenience of fabrication, low power consumption, and stability.

Gold Nanoparticle-Induced Photocurrent Quenching and Recovery of Polymer Dots: Toward Signal-On Energy-Transfer-Based Photocathodic Bioanalysis of Telomerase Activity in Cell Extracts

Energy transfer (ET) in photoelectrochemical (PEC) bioanalysis is usually generated between noble metal nanoparticles (NPs) and traditional inorganic quantum dots (QDs). Using the innovative polymer dot (Pdot)-involved ET, this work reports the first signal-on and cathodic PEC bioanalysis toward telomerase (TE) activity in cell extracts. Specifically, the sequential binding of capture DNA (cDNA), telomerase primer sequence (TS), and Au NP-labeled probe DNA (Au NP-pDNA) on the electrode would place the Au NPs in close proximity of the Pdots, leading to obvious quenching of the cathodic photocurrent. The subsequent extension of the TS by TE in the presence of deoxyribonucleoside triphosphates (dNTPs) would then release the Ag NP-pDNA from the electrode, leading to the recovery of the photocurrent. On the basis of the Au NP-induced photocurrent quenching and the recovery of Pdots, a sensitive biosensor could thus be developed by tracking the photocurrents to probe the TE activity. This strategy allows for signal-on and cathodic PEC bioanalysis of TE, which can be easily extended for numerous other targets of interest. We believe this work could offer a new perspective for the rational implementation of Pdot-involved ET for advanced PEC bioanalysis.

Perylene-Based Photoactive Material as a Double-Stranded DNA Intercalating Probe for Ultrasensitive Photoelectrochemical Biosensing

Photoelectrochemical (PEC) sensing techniques have attracted considerable concerns because of the intrinsic merit of complete separation between the excitation light and responsive current but still remain a great challenge for further potential application. It is assigned to the scarcity of photoactive materials with narrow band gap, good biosafety, and high photon-to-electron conversion efficiency and unfavorable processing methods for photoactive materials on indium tin oxide. Herein, we employed a perylene-based polymer (PTC-NH₂) with exceptional photoelectrical properties to develop a red-light-driven PEC sensor for ultrasensitive biosensing based on its superior electrostatic intercalation efficiency in double-stranded DNA to that in single-stranded DNA, with DNA adenine methyltransferase (Dam MTase) as the model target. The prepared PTC-NH₂ was characterized by Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, and PEC techniques, and the results demonstrated that PTC-NH₂ rather than metal oxides/metal sulfides/C₃N₄/metal complexes enjoyed the prominent capacity of converting light to current. Benefiting from the unique PEC properties of PTC-NH₂ and target-initiated hybridization chain reaction (HCR) signal amplification, ultrasensitive detection of Dam MTase was accessibly realized with the detection limit of 0.015 U/mL, which is lower than that of PEC, electrochemical, or fluorescent biosensors previously reported. Furthermore, the proposed PEC sensor has been also applied in screening Dam MTase activity inhibitors. Therefore, the perylene-based PEC sensor exhibits great potential in early accurate diagnosis of DNA methylation-related diseases.

Photofunctions of iridium(iii) complexes in vesicles: long-lived excited states and visible-light sensitization for hydrogen evolution in aqueous solution

Utilization of DPPC vesicles allows water-insoluble photoactive Ir(iii) complexes to be dispersed in bulk aqueous solution.