Internal Calibration Potentiometric Aptasensors for Simultaneous Detection of Hg2+, Cd2+, and As3+ Based on a Screen-Printed Carbon Electrodes Array

All-solid-state K+ sensing array based on Au@polystyrene nanocomposites

All-solid-state ion selective electrodes (ASS-ISEs) are easy to miniaturize and array, meeting the needs of home sensing devices. However, ASS-ISEs still faces challenges in accuracy and stability due to basic potential changes caused by non-specific adsorption of charged background compositions and the complex electrode preparation steps. To this end, our group successfully subtracted the background signal by integrating a self-calibrating channel in the sensing array and simplified the electrode preparation steps by preparing multi-functional PS-Au nanocomposites. However, the uniformity and gold content of PS-Au nanocomposites are difficult to control, so Au@PS nanocomposites are prepared as sensor materials in this paper to further reduce the differences between batches of electrodes. K+ Au@PS sensing array can be obtained by directly dropping Au@PS nanocomposites on the screen-printed carbon electrodes (SPCEs), which shows a near Nernstian behavior in the range 1.0 × 10-3 M to 0.3 M and good reproducibility in real sample testing. The detection results by K+ Au@PS sensing array for K+ in human morning urine agreed well with that tested by ICP-AES, which make the K+-ASS-ISE suitable for home health monitoring.

Simultaneous Detection of Biomarkers in Urine Using a Multicalibration Potentiometric Sensing Array Combined with a Portable Analyzer

Domestic monitoring devices make real-time and long-term health monitoring possible, allowing people to track their health status regularly. Uric acid (UA), creatinine, and urea in urine are three important biomarkers for various diseases, especially kidney diseases. This work proposed a 10-channel potentiometric sensing array containing a UA electrode group, a creatinine electrode group, a urea electrode group, a pH electrode group, and one pair of reference channels, which could be connected with a portable potentiometric analyzer, realizing the simultaneous detection of UA, creatinine, urea, and pH in urine. The prepared Pt/carbon nanotubes (CNTs)-uricase, creatinine deiminase, Au@urease, and polyaniline were employed as the sensing materials, showing responses to four targets with high sensitivity and selectivity. To improve the accuracy of domestic monitoring, a calibration channel was integrated into each electrode group to calibrate the basic potential of the sensing channels, and the influences of pH and temperature on the responses were investigated through the pH electrode group and an external temperature probe to calibrate the slope and intercept. With the preset of the deduced calibration parameters and computational formula for the four targets in the analyzer in Lab Mode, the concentrations of UA, creatinine, and urea and the pH of the human urine samples were directly displayed on the screen of the analyzer in Practical Mode. The agreement of these results with those obtained from commercial kits and pH meters reveals the high potential of these methods for developing domestic devices to facilitate health monitoring.

A novel DNA-quantum dot nanostructure electrochemiluminescence aptamer sensor by chain reaction amplification for rapid detection of trace Cd2

This work proposes a new enzyme-free electrochemiluminescence (ECL) sensing platform based on a novel DNA-quantum dot (QD) nanostructure and hybridization chain reaction (HCR) amplification for the trace detection of Cd2+. First, the Cd2+ aptamer triggers the HCR amplification circuit, so abundant biotin-labeled DNAs are introduced to the electrode, and then biotin as a linker specifically captures a large number of streptavidin (SA)-CdS QD complexes, showing very high ECL signals. After the present Cd2+ binds to its aptamer on the electrode, it causes the linear DNA structure loaded with a large number of QDs to break away from the electrode, resulting in a significantly decreased ECL response. This method combines the HCR-amplified DNA structure-QD signal with the specificity of the biotin-avidin reaction, enabling the rapid detection of Cd2+ in complex water. Therefore, this sensor provides a novel and competitive strategy for detecting heavy metal ions in actual samples, which extends its application to practical settings, such as environmental monitoring and biomedical diagnostics.

Recent Aptamer-Based Biosensors for Cd2+ Detection

Cd²⁺, a major environmental pollutant, is heavily toxic to human health. Many traditional techniques are high-cost and complicated; thus, developing a simple, sensitive, convenient, and cheap monitoring approach is necessary. The aptamer can be obtained from a novel method called SELEX, which is widely used as a DNA biosensor for its easy acquisition and high affinity of the target, especially for heavy metal ions detection, such as Cd²⁺. In recent years, highly stable Cd²⁺ aptamer oligonucleotides (CAOs) were observed, and electrochemical, fluorescent, and colorimetric biosensors based on aptamers have been designed to monitor Cd²⁺. In addition, the monitoring sensitivity of aptamer-based biosensors is improved with signal amplification mechanisms such as hybridization chain reactions and enzyme-free methods. This paper reviews approaches to building biosensors for inspecting Cd²⁺ by electrochemical, fluorescent, and colorimetric methods. Finally, many practical applications of sensors and their implications for humans and the environment are discussed.

Integration of nanomaterial sensing layers on printable organic field effect transistors for highly sensitive and stable biochemical signal conversion

Organic field effect transistor (OFET) devices are one of the most popular candidates for the development of biochemical sensors due to their merits of being flexible and highly customizable for low-cost large-area manufacturing. This review describes the key points in constructing an extended-gate type OFET (EGOFET) biochemical sensor with high sensitivity and stability. The structure and working mechanism of OFET biochemical sensors are described firstly, emphasizing the importance of critical material and device engineering to higher biochemical sensing capabilities. Next, printable materials used to construct sensing electrodes (SEs) with high sensitivity and stability are presented with a focus on novel nanomaterials. Then, methods of obtaining printable OFET devices with steep subthreshold swing (SS) for high transconductance efficiency are introduced. Finally, approaches for the integration of OFETs and SEs to form portable biochemical sensor chips are introduced, followed by several demonstrations of sensory systems. This review will provide guidelines for optimizing the design and manufacturing of OFET biochemical sensors and accelerating the movement of OFET biochemical sensors from the laboratory to the marketplace.

DNA-functionalized gold nanoparticles: Modification, characterization, and biomedical applications

With the development of technologies based on gold nanoparticles (AuNPs), bare AuNPs cannot meet the increasing requirements of biomedical applications. Modifications with different functional ligands are usually needed. DNA is not only the main genetic material, but also a good biological material, which has excellent biocompatibility, facile design, and accurate identification. DNA is a perfect ligand candidate for AuNPs, which can make up for the shortcoming of bare AuNPs. DNA-modified AuNPs (DNA-AuNPs) have exciting features and bright prospects in many fields, which have been intensively investigated in the past decade. In this review, we summarize the various approaches for the immobilization of DNA strands on the surface of AuNPs. Representative studies for biomedical applications based on DNA-AuNPs are also discussed. Finally, we present the challenges and future directions.

Demand-oriented construction of Mo3S13-LDH: A versatile scavenger for highly selective and efficient removal of toxic Ag(I), Hg(II), As(III), and Cr(VI) from water

Inspired by the classic ion-exchange reaction, a single phase material of Mg_0.66Al_0.34(OH)₂(Mo₃S₁₃)_0.03(NO₃)_0.14(CO₃)_0.07·H₂O (Mo₃S₁₃-LDH) was masterly constructed by intercalating Mo₃S₁₃^2- into the MgAl-LDH gallery. Prepared Mo₃S₁₃-LDH displays excellent binding affinity and high selectivity for Ag(I) and Hg(II) in a mixed solution, in which an apparent selectivity order of Hg(II) > Ag(I) ≫ Pb(II), Cu(II), Ni(II), Co(II), Cd(II), and Mn(II) is observed. Enormous capture capacities (q_m^Ag = 446.4 mg/g, q_m^Hg = 354.6 mg/g) and fast equilibration time (within 60 min) place Mo₃S₁₃-LDH in the upper ranks of materials for such removal. For oxoanions, As(III) (HAsO₃^2-) and Cr(VI) (CrO₄^2-) can be specifically trapped by Mo₃S₁₃-LDH with comparable loading ability (q_m^As = 61.8 mg/g, q_m^Cr = 90.6 mg/g) in the coexistence of multiple interfering anions. Notably, high Hg(II) and Cr(VI) concentrations are finally reduced below the safe limit of drinking water. The excellent capture capacity of Mo₃S₁₃-LDH benefits from the rational design by following two aspects: (i) the multiple sulfur ligands in Mo₃S₁₃^2- groups give place to various capture modes and different affinity orders for target ions, and (ii) large-sized Mo₃S₁₃^2- groups widen the interlayer spacing of LDH, thereby accelerating the mass transfer process. Furthermore, the satisfactory structural stability of Mo₃S₁₃-LDH is also reflected through the unchanged hexagonal prismatic shape after adsorption. All of these highlight the great potential of Mo₃S₁₃-LDH for the application in water remediation.

A critical review on microbe-electrode interactions towards heavy metal ion detection using microbial fuel cell technology

Implicit interaction of electroactive microbes with solid electrodes is an interesting phenomenon in nature, which supported development of bioelectrochemical systems (BESs), especially the microbial fuel cell (MFCs) for valorization of low-value waste streams into bioelectricity. Intriguingly, the metabolism of interacted microbes with electrode is affected by the microenvironment at electrodes, which influences the current response. For instance, when heavy metal ions (HMIs) are imposed in the medium, the current production decreases due to their intrinsic toxic effect. This event provides an immense opportunity to utilize MFC as a sensor to selectively detect HMIs in the environment, which has been explored vastly in recent decade. In this review, we have concisely discussed the microbial interaction with electrodes and mechanism of detection of HMIs using an MFC. Recent advancement in sensing elements and their application is elaborated with a future perspective section for follow-up research and development in this field.

A ratiometric electrochemical sensor for the determination of exosomal glycoproteins

Abnormal glycosylation of exosomal proteins is related to many diseases. However, there is still a lack of convenient and easy methods for the determination of exosomal glycoproteins. In this work, a ratiometric electrochemical sensor based on the recognition of glycoproteins by boronic acid and core-shell nanoparticles of silica-silver (SiO₂@Ag) amplified signals was developed for the highly sensitive detection of exosomal glycoproteins. The CD63 aptamer-SiO₂-N-(2-((2-aminoethyl)disulfanyl)ethyl) ferrocene carboxamide (FcNHSSNH₂) probe was first connected to graphene oxide-cucurbit [7] (GO-CB [7]) modified GCE through host-guest recognition. The CD63 aptamer was employed for the specific capture of exosomes, and the FcNHSSNH₂ molecule was used as the internal reference signal of the sensor. The mercaptophenylboronic acid (MPBA) of MPBA-SiO₂@Ag probe was used for the identification of exosomes surface glycoproteins. SiO₂ nanoparticle has a large specific surface area, which can load a large amount of silver nanoparticles (AgNPs) for electrochemical signal amplification. The results were expressed as the current ratio of AgNPs and FcNHSSNH₂. The introduction of the internal reference molecule FcNHSSNH₂ could effectively reduce the measurement error caused by the different DNA density of the substrate, and further improve the sensitivity and accuracy of the detection. Under the optimal experimental conditions, this sensor allowed the sensitive detection of exosomal glycoproteins in the range of 4.2 × 10² to 4.2 × 10⁸ particles/μL with a limit of detection (LOD) of 368 particles/μL. Furthermore, the ratiometric electrochemical sensor could be employed for the detection of exosomal glycoproteins in human serum samples, which has a good clinical application prospect.

Recent Advances in Potentiometric Biosensing

Potentiometric biosensors are incredibly versatile tools with budding uses in industry, security, environmental safety, and human health. This mini-review on recent (2018-2020) advances in the field of potentiometric biosensors is intended to give a general overview of the main types of potentiometric biosensors for novices while still providing a brief but thorough summary of the novel advances and trends for experienced practitioners. These trends include the incorporation of nanomaterials, graphene, and novel immobilization materials, as well as a strong push towards miniaturized, flexible, and self-powered devices for in-field or at-home use.

From Small Molecules Toward Whole Cells Detection: Application of Electrochemical Aptasensors in Modern Medical Diagnostics

This paper focuses on the current state of art as well as on future trends in electrochemical aptasensors application in medical diagnostics. The origin of aptamers is presented along with the description of the process known as SELEX. This is followed by the description of the broad spectrum of aptamer-based sensors for the electrochemical detection of various diagnostically relevant analytes, including metal cations, abused drugs, neurotransmitters, cancer, cardiac and coagulation biomarkers, circulating tumor cells, and viruses. We described also possible future perspectives of aptasensors development. This concerns (i) the approaches to lowering the detection limit and improvement of the electrochemical aptasensors selectivity by application of the hybrid aptamer-antibody receptor layers and/or nanomaterials; and (ii) electrochemical aptasensors integration with more advanced microfluidic devices as user-friendly medical instruments for medical diagnostic of the future.

A Co-Nanoparticles Modified Electrode for On-Site and Rapid Phosphate Detection in Hydroponic Solutions

Conventional strategies for determining phosphate concentration is limited in efficiency due to the cost, time, and labor that is required in laboratory analysis. Therefore, an on-site and rapid detection sensor for phosphate is urgently needed to characterize phosphate variability in a hydroponic system. Cobalt (Co) is a highly sensitive metal that has shown a selectivity towards phosphate to a certain extent. A disposable phosphate sensor based on the screen-printed electrode (SPE) was developed to exploit the advantages of Co-nanoparticles. A support vector machine regression model was established to predict the concentration of phosphate in the hydroponic solutions. The results showed that Co-nanoparticles improve the detection limit of the sensor in the initial state. Meanwhile, the corrosion of Co-nanoparticles leads to a serious time-drift and instability of the electrodes. On the other hand, the coefficient of variation of the disposable phosphate detection chip is 0.4992%, the sensitivity is 33 mV/decade, and the linear range is 10-1-10-4.56 mol/L. The R2 and mean square error of the buffer-free sensor in the hydroponic solution are 0.9792 and 0.4936, respectively. In summary, the SPE modified by the Co-nanoparticles is a promising low-cost sensor for on-site and rapid measurement of the phosphate concentration in hydroponic solutions.

Bio- and Biomimetic Receptors for Electrochemical Sensing of Heavy Metal Ions

Heavy metals ions (HMI), if not properly handled, used and disposed, are a hazard for the ecosystem and pose serious risks for human health. They are counted among the most common environmental pollutants, mainly originating from anthropogenic sources, such as agricultural, industrial and/or domestic effluents, atmospheric emissions, etc. To face this issue, it is necessary not only to determine the origin, distribution and the concentration of HMI but also to rapidly (possibly in real-time) monitor their concentration levels in situ. Therefore, portable, low-cost and high performing analytical tools are urgently needed. Even though in the last decades many analytical tools and methodologies have been designed to this aim, there are still several open challenges. Compared with the traditional analytical techniques, such as atomic absorption/emission spectroscopy, inductively coupled plasma mass spectrometry and/or high-performance liquid chromatography coupled with electrochemical or UV-VIS detectors, bio- and biomimetic electrochemical sensors provide high sensitivity, selectivity and rapid responses within portable and user-friendly devices. In this review, the advances in HMI sensing in the last five years (2016-2020) are addressed. Key examples of bio and biomimetic electrochemical, impedimetric and electrochemiluminescence-based sensors for Hg2+, Cu2+, Pb2+, Cd2+, Cr6+, Zn2+ and Tl+ are described and discussed.

Versatile Sensing Platform for Cd2+ Detection in Rice Samples and Its Applications in Logic Gate Computation

A versatile sensing platform was designed for Cd²⁺ detection utilizing Mg²⁺-dependent DNAzyme as the biocatalyst and toehold-mediated strand replacement as the reaction mechanism. The Cd²⁺-aptamer interaction brings the split subunits of the Mg²⁺-dependent DNAzyme into close-enough proximity, which generates an active DNAzyme that can catalyze the cleavage reaction toward the hairpin substrate strand (H1). The trigger DNA fragment in H1 can open another hairpin probe (H2) to activate the cyclic signal amplification process. The generated numerous G-quadruplex DNAzyme structures will produce a high fluorescence response after incubation with the fluorescence dye N-methyl mesoporphyrin IX (NMM). This detection platform is ultrasensitive and the detection limit (LOD) is 2.5 pM (S/N = 3). The sensing system is robust and can work effectively even in a complex sample matrix, enabling the quantitative analysis of Cd²⁺ content in rice samples with good reliability. Showing the unique features of simple operation, label-free and enzyme-free format, high sensitivity and selectivity, and universal signal amplification mode, our proposed sensing protocol holds great promise for becoming a competitive alternative for the routine monitoring of Cd²⁺ pollution. Importantly, this flexible and versatile sensing platform was used to construct some exquisite logic gates, including AND, OR, INHIBIT, IMPLICATION, NOR, and NAND.

An enzyme-free DNA circuit for the amplified detection of Cd2+ based on hairpin probe-mediated toehold binding and branch migration

An enzyme-free DNA circuit was designed for the amplified detection of Cd2+ based on hairpin probe-mediated toehold binding and branch migration. A Cd2+-specific aptamer was used to recognize Cd2+ and a G-quadruplex was used to report the detection signal. The assay is sensitive, with a detection limit of 5 pM.

Wavelength distinguishable signal quenching and enhancing toward photoactive material 3,4,9,10-perylenetetracarboxylic dianhydride for simultaneous assay of dual metal ions

Photoelectrochemical (PEC) assay with low background, simple instrumentation and high sensitivity has deemed as one of the most potential strategies to simultaneous multi-component detection. How to distinguish photocurrent changes caused by various targets on a single sensing platform thus becomes the key issue to be resolved. Herein, we innovatively proposed a multiplex PEC biosensor based on wavelength distinguishable signal quenching and enhancing toward photoactive material 3,4,9,10-perylenetetracarboxylic dianhydride (PTCDA) for simultaneous assay of dual metal ions. Briefly, S1 and S2 ssDNA containing sensitizer methylene blue and quencher ferrocene (termed as MB-S1 and Fc-S2), respectively, were first generated through target Pb²⁺ and Mg²⁺-induced DNAzyme-assisted target recycling, which thereafter were modified on PTCDA sensing platform specifically via host-guest recognition with β-cyclodextrin (β-CD). Interestingly, the sensitizer MB could enhance photocurrent of PTCDA under the excitation wavelength of 623 nm and 590 nm, respectively, while the quencher Fc just quencher the photocurrent of PTCDA under the excitation wavelength of 590 nm, thereby achieving wavelength distinguishable signal quenching and enhancing toward photoactive material PTCDA for simultaneous assay of dual metal ions. As a result, the conceived biosensor for Mg²⁺ and Pb²⁺ detection realized high sensitivity with detection limit of 0.3 pM and 0.3 nM, respectively. The proposed strategy not only for the first time achieved the discrimination of varied PEC signal caused by two targets with usage of sole photoelectric material, but also realized the simultaneous multiplex assay on a single sensing platform, providing a new way for constructing effective and sensitive PEC biosensor for multi-component detection.

An ultrasensitive electrochemical aptasensor for the determination of tumor exosomes based on click chemistry

Exosomes, lipid bilayer membrane vesicles, can guide various pathological and physiological processes. However, reliable, convenient and sensitive methods for exosome determination for early cancer diagnosis are still technically challenging. Herein, an electrochemical aptasensor based on click chemistry and the DNA hybridization chain reaction (HCR) for signal amplification has been developed for the ultrasensitive detection of tumor exosomes. CD63 aptamer was first immobilized on a glassy carbon electrode for capturing exosomes, and 4-oxo-2-nonenal alkyne (alkynyl-4-ONE) molecules, functionalized lipid electrophiles, were conjugated to the exosomes via the reaction of amino and aldehyde groups. Azide-labeled DNA probe as an anchor was then connected to the exosomes by copper (I)-catalyzed click chemistry. Signal amplification was achieved by HCR, and the numerous linked horseradish peroxidase (HRP) molecules could catalyze the reaction of o-phenylenediamine (OPD) and H₂O₂. The concentration of exosomes could be quantified by monitoring the electrochemical reduction current of 2,3-diaminophenazine (DAP). Under the optimal conditions, this method allowed the sensitive detection of exosomes in the range of 1.12 × 10² to 1.12 × 10⁸ particles/μL with a limit of detection (LOD) of 96 particles/μL. Furthermore, the present assay enabled sensitive and accurate quantification of exosomes in human serum, and it has high potential for exosome analysis in clinical samples.

Label-free potentiometric aptasensing platform for the detection of Pb2+ based on guanine quadruplex structure

Potentiometric aptasensors enhanced by integrating advanced nanomaterials are of particular interest for the detection of multiplex species (e.g., proteins, bacteria, micro-organisms) due to their low cost, ease of operation, and low detection limits. However, potentiometric detection of small ionic species aptasensors is still challenging. This article describes the first example of a label-free G-quadruplex-based potentiometric aptasensing platform for the detection of Pb²⁺. Polyion oligonucleotide-labeled gold nanoparticles (AuNPs-DNA) as probes are modified on Au electrode, providing high-density negative charge on the electrode surface. These signal-amplifying probes can selectively form G-quadruplexes with the presence of Pb²⁺ ions and reduce the negative charges on the electrode surface, hence achieving potentiometric detection of Pb²⁺ ions with high selectivity. The AuNPs-DNA-based aptasensor shows an acceptable sensitivity over a wide range from 10^-11 to 10^-6 M with a detection limit of 8.5 pM. Furthermore, confirmed by coupled plasma mass spectrometry, the sensing platform is capable of performing effective and accurate detection of Pb²⁺ level in real water samples. The presented aptasensor offers a fast, convenient, low-maintenance, and highly sensitive alternative for on-site water pollution detections.

An in situ assembly strategy for the construction of a sensitive and reusable electrochemical aptasensor

In situ assembly of an electroactive AuNPs–Cu²⁺–l-cysteine tag was applied for the construction of a sensitive and reusable aptasensor.