Understanding Signal and Background in a Thermally Resolved, Single-Branched DNA Assay Using Square Wave Voltammetry

Recent advances in electrochemical proximity ligation assay

Proximity ligation assay (PLA) is a vigorously developed homogeneous immunoassay assisted by DNA combining dual recognition of target protein by pairs of proximity probes, in which the detection of protein is tactfully converted to the detection of DNA. The booming developments in PLA have enabled a variety of ultrasensitive assays for the detection of protein and this concept of PLA is also extended to the detection of nucleic acids and some small molecule. The association between PLA and electrochemical method, defined as electrochemical proximity ligation assay (ECPLA), has gained much interests in disease diagnosis, food safety and environmental assays with the advantages, such as broad range of targets, simplicity, low cost and rapid response. In this review, we took a different perspective to present the history of PLA, the classical ECPLA biosensing methodology as well as the developments of ECPLA based on several key parameters, such as sensitivity, selectivity, reusability and generalization. In addition, the developments of PLA with electrochemiluminescence as readout are also presented. Finally, perspective and some unresolved challenges in ECPLA that can potentially be addressed have also been discussed.

Effects of Nucleic Acid Structural Heterogeneity on the Electrochemistry of Tethered Redox Molecules

The cation condensation-induced collapse of electrode-bound nucleic acids and the resulting change in the electrochemical signal is a useful tool to predict the structure and redox probe location of heterogeneous structures of surface-tethered DNA probes─a common architecture employed in the development of electrochemical sensors. In this paper, we measure the faradaic current of an appended redox molecule at the 3' position of the nucleic acid using cyclic voltammetry before and after nucleic acid collapse for various nucleic acid architectures and heterogeneous mixtures on the same electrode surface. The voltammetric peak current change with collapse correlates with the proximity of the redox molecules from the surface. For stem-loop probes, the terminal methylene blue is initially held closer to the surface, such that inducing collapse, by reducing the dielectric permittivity of the interrogation solution, results in a ∼30% increase in current. However, when incorporating pseudoknot probes that hold methylene blue further away from the electrode surface, the current change is much larger (∼120%), indicating a larger conformation change. Upon a 50:50 ratio of the two, we observe a change in current that relates to the ratiometric distribution of the probe used to make the surfaces. Additionally, using cyclic voltammetry, we find that the change between diffusion-limited and diffusion-independent peak currents is dependent upon the distinct structural characteristics of DNA probes on the surface (stem-loop or pseudoknot), as well as the ratios of different DNA probes on the surface. Thus, we demonstrate that the heterogeneous nature of DNA probes governs the corresponding electrochemical signals, which can lead to a better understanding on how to predict the structures of functional nucleic acids on electrode surfaces and how this affects surface-to-surface variability and electrochemical response.

Interplay of Effective Surface Area, Mass Transport, and Electrochemical Features in Nanoporous Nucleic Acid Sensors

Electrochemical biosensors transduce biochemical events (e.g., DNA hybridization) to electrical signals and can be readily interfaced with electronic instrumentation for portability. Nanostructuring the working electrode enhances sensor performance via augmented effective surface area that increases the capture probability of an analyte. However, increasing the effective surface area via thicker nanostructured electrodes hinders the analyte's permeation into the nanostructured volume and limits its access to deeper electrode surfaces. Here, we use nanoporous gold (np-Au) with various thicknesses and pore morphologies coupled with a methylene blue (MB) reporter-tagged DNA probe for DNA target detection as a model system to study the influence of electrode features on electrochemical sensing performance. Independent of the DNA target concentration, the hybridization current (surrogate for detection sensitivity) increases with the surface enhancement factor (EF), until an EF of ∼5, after which the sensor performance deteriorates. Electrochemical and fluorometric quantification of a desorbed DNA probe suggest that DNA permeation is severely limited for higher EFs. In addition, undesirable capacitive currents disguise the faradaic currents from the MB reporter at larger EFs that require higher square wave voltammetry (SWV) frequencies. Finally, a real-time hybridization study reveals that expanding the effective surface area beyond EFs of ∼5 decreases sensor performance.

Nonfaradaic Current Suppression in DNA-Based Electrochemical Assays with a Differential Potentiostat

One of the key factors limiting sensitivity in many electrochemical assays is the nonfaradaic or capacitive current. This is particularly true in modern assay systems based on DNA monolayers at gold electrode surfaces, which have shown great promise for bioanalysis in complex milieu such as whole blood or serum. While various changes in analytical parameters, redox reporter molecules, DNA structures, probe coverage, and electrode surface area have been shown useful, background reduction by hardware subtraction has not yet been explored for these assays. Here, we introduce new electrochemistry hardware that considerably suppresses nonfaradaic currents through real-time analog subtraction during current-to-voltage conversion in the potentiostat. This differential potentiostat (DiffStat) configuration is shown to suppress or remove capacitance currents in chronoamperometry, cyclic voltammetry, and square-wave voltammetry measurements applied to nucleic acid hybridization assays at the electrode surface. The DiffStat makes larger electrodes and higher sensitivity settings accessible to the user, providing order-of-magnitude improvements in sensitivity, and it also significantly simplifies data processing to extract faradaic currents in square-wave voltammetry (SWV). Because two working electrodes are used for differential measurements, unique arrangements are introduced such as converting signal-OFF assays to signal-ON assays or background drift correction in 50% human serum. Overall, this new potentiostat design should be helpful not only in improving the sensitivity of most electrochemical assays, but it should also better support adaptation of assays to the point-of-care by circumventing complex data processing.

A Nucleic Acid Nanostructure Built through On-Electrode Ligation for Electrochemical Detection of a Broad Range of Analytes

For an assay to be most effective in point-of-care clinical analysis, it needs to be economical, simple, generalizable, and free from tedious workflows. While electrochemistry-based DNA sensors reduce instrumental costs and eliminate complicated procedures, there remains a need to address probe costs and generalizability, as numerous probes with multiple conjugations are needed to quantify a wide range of biomarkers. In this work, we have opened a route to circumvent complicated multiconjugation schemes using enzyme-catalyzed probe construction directly on the surface of the electrode. With this, we have created a versatile DNA nanostructure probe and validated its effectiveness by quantification of proteins (streptavidin, anti-digoxigenin, anti-tacrolimus) and small molecules (biotin, digoxigenin, tacrolimus) using the same platform. Tacrolimus, a widely prescribed immunosuppressant drug for organ transplant patients, was directly quantified with electrochemistry for the first time, with the assay range matching the therapeutic index range. Finally, the stability and sensitivity of the probe was confirmed in a background of minimally diluted human serum.

Ligand-Based Stability Changes in Duplex DNA Measured with a Microscale Electrochemical Platform

Development of technologies for rapid screening of DNA secondary structure thermal stability and the effects on stability for binding of small molecule drugs is important to the drug discovery process. In this report, we describe the capabilities of an electrochemical, microdevice-based approach for determining the melting temperatures (T_m) of electrode-bound duplex DNA structures. We also highlight new features of the technology that are compatible with array development and adaptation for high-throughput screening. As a foundational study to exhibit device performance and capabilities, melting-curve analyses were performed on 12-mer DNA duplexes in the presence/absence of two binding ligands: diminazene aceturate (DMZ) and proflavine. By measuring electrochemical current as a function of temperature, our measurement platform has the ability to determine the effect of binding ligands on T_m values with high signal-to-noise ratios and good reproducibility. We also demonstrate that heating our three-electrode cell with either an embedded microheater or a thermoelectric module produces similar results. The ΔT_m values we report show the stabilizing ability of DMZ and proflavine when bound to duplex DNA structures. These initial proof-of-concept studies highlight the operating characteristics of the microdevice platform and the potential for future application toward other immobilized samples.