Reagentless Detection of Low-Molecular-Weight Triamterene Using Self-Doped TiO2 Nanotubes

Multivariate optimization of methylene blue dye degradation using electro-Fenton process with self-doped TiO2 nanotube anode

This paper reports the optimization of the electro-Fenton (EF) process using different anode materials for the degradation of Methylene Blue (MB) dye as a model compound. The cathode used was an air-diffusion PTFE, while three different anode materials (Pt, DSA, and self-doped TiO2 nanotubes - SD-TNT) were tested individually. A full factorial design (FFD) with a central point combined with response surface methodology (RSM) was employed to optimize the experimental variables, including solution pH, applied current, and anode material. The optimized EF conditions involved a pH of 4.0, a current of 100 mA, and an SD-TNT anode for 120 min of electrolysis. Under these conditions, the MB solution achieved complete decolorization and 45% of total organic carbon (TOC) removal after 120 min of EF treatment. The findings indicate that the hydroxyl radical (•OH) plays a crucial role as the primary oxidizing agent in the EF process. The decay of MB followed pseudo-first-order kinetics, reflecting a consistent formation of •OH radicals that effectively attacked the MB dye and its subproducts during mineralization. Moreover, the EF process exhibited superior performance in terms of energy consumption (EC) and mineralization current efficiency (ECM) in the initial treatment stages, while the presence of recalcitrant by-products and loss of anode self-doping impacted performance in the later stages. The optimized EF conditions and the understanding gained from this study contribute to the advancement of sustainable wastewater treatment strategies for the removal of organic dyes.

Thin Films of Polyaniline-Based Nanocomposites with CeO2 and WO3 Metal Oxides Applied to the Impedimetric and Capacitive Transducer Stages in Chemical Sensors

There is a recognized need for the development of cost-effective, stable, fast, and optimized novel materials for technological applications. Substantial research has been undertaken on the role of polymeric nanocomposites in sensing applications. However, the use of PANI-based nanocomposites in impedimetric and capacitive electrochemical sensors has yet to be understood. The present study aimed to explore the relationship between the sensitivity and linearity of electrochemical pH sensors and the composition of nanocomposites. Thin films of PANI/CeO₂ and PANI/WO₃ were deposited via spin coating for characterization and application during the electrochemical impedance and capacitance spectroscopy (EIS and ECS) transduction stages. The findings showed that the optimized performance of the devices was extended not only to the sensitivity but also to the linearity. An increase of 213% in the ECS sensitivity of the PANI/CeO₂ compared to the metal oxide and an increase of 64% in the ECS linearity of the PANI/WO₃ compared to the polymeric sensitivity were reported. This study identified the structure-property relationship of nanocomposite thin films of PANI with metal oxides for use in electrochemical sensors. The developed materials could be applied in devices to be used in different fields, such as food, environment, and biomedical monitoring.

Research on Detection of Sterol Doping in Sports by Electrochemical Sensors: A Review

The use of doping by athletes to improve performance is prohibited. Therefore, doping testing is an important step to ensure fairness in sports. Doping is gradually metabolized in the body and is therefore difficult to detect immediately by a common method. At the same time, the emergence of new doping agents poses a challenge for highly sensitive detection. Electrochemical sensors are a fast, highly sensitive, and inexpensive analytical detection technology. It provides qualitative and quantitative determination of analytes by altering the electrochemical signal of the analyte or probe at the electrode. In this min-review, we summarized the different electrochemical sensing strategies for sterol doping detection. Some of the representative papers were interpreted in detail. In addition, we compare different sensing strategies.

Self-doping of Nb2O5NC by cathodic polarization for enhanced conductivity properties and photoelectrocatalytic performance

A simple novel electrochemical reduction approach was developed for the self-doping of Nb⁴⁺ in niobium oxide nanochannels (Nb₂O₅NC), changing the conductivity, optical properties, and photocatalytic properties of the material. Nb₂O₅NC was synthesized using different electrolytes: 0.4 wt% HF in 1 M H₂SO₄ (EI), 0.4 M NH₄F in glycerol (EII), and 0.25 g NH₄F with 4 vol% water in glycol at 50 °C (EIII). Field emission scanning electron microscopy (FEG-SEM) analysis showed well-organized arrays of Nb₂O₅ nanochannels produced on Nb foil, with varying tube diameters in the order EII < EI < EIII and film thickness in the order EI < EII < EIII, which drastically affected the photocurrent vs. potential curves. In order to self-dope the Nb₂O₅, the samples were electrochemically reduced in 0.1 M KH₂PO₄ buffer solution (pH 10) for 5 min, at -2.5 V vs. Ag/AgCl, resulting in the doped samples denoted P-EI, P-EII, and P-EIII. The results showed that reduction of Nb⁵⁺ to Nb⁴⁺ occurred for all the Nb₂O₅NC samples, leading to decreased surface charge transfer resistance between the Nb₂O₅NC and the electrolyte, as well as increases of the charge carrier density and photocurrent for all the self-doped samples, compared to undoped samples. Sample P-EI was also tested for the degradation of reactive red 120 (RR120) dye, achieving efficient photoelectrocatalytic degradation of a 10 mg L^-1 dye solution. These results reveal that the self-doping approach can enhance the photoelectrocatalytic properties of Nb₂O₅ photoanode, offering an alternative way for the removal of reactive dyes.

Preparation of ZnO/two-layer self-doped black TiO2 nanotube arrays and their enhanced photochemical properties

Highly efficient TiO₂ photoanodes can be achieved by enhancing electrical conductivity and improving charge separation and transfer. In this paper, Ti foils were used to fabricate TiO₂ nanotubes by anodic oxidation and ZnO/two-layer self-doped black TiO₂ nanotubes were prepared by electrochemical reduction and a hydrothermal method. The formed black TiO₂ nanotubes have a better photoconversion efficiency and the maximum photoconversion efficiency increased by 59% compared with the pure nanotubes. The deposition of ZnO further improves the maximum photoconversion efficiency to 456% based on black TiO₂. The photocurrent responses also increase by about 5 times in our results. This work is instructive for the development of highly robust and efficient photoanode materials in fields including photoelectrochemistry and photocatalysis.

Highly efficient TiO₂ photoanodes can be achieved by enhancing electrical conductivity and improving charge separation and transfer.

Introducing mesoscopic charge transfer rates into molecular electronics

It has been demonstrated that the concept of mesoscopic rate is able to establish a bridge between electrochemical and molecular electronic concepts.

Serological point-of-care and label-free capacitive diagnosis of dengue virus infection

Dengue non-structural protein 1 (NS1 DENV) is considered a biomarker for dengue fever in an early stage. A sensitive and rapid assay for distinguishing positive from negative dengue infection samples is imperative for epidemic control and public health in tropical regions because it enables the development of instantaneous updatable databases and effective surveillance systems. Presently, we successfully report, for the first time, the use of the electrochemical capacitive method for the detection of NS1 DENV biomarker in human serum samples. By using a ferrocene-tagged peptide modified surface containing anti-NS1 as the receptor, it was possible to differentiate positive from negative samples with a p < 0.01 in a reagentless and label-free capacitive format. This capacitive assay had a cut-off of 1.36% (confidence interval of 99.99%); it therefore opens new avenues for developing miniature label-free electrochemical devices for infectious diseases.