Vacuum Ultraviolet Laser Desorption/Ionization Mass Spectrometry Imaging of Single Cells with Submicron Craters

Proteomics mining of cancer hallmarks on a single-cell resolution

Dysregulated proteome is an essential contributor in carcinogenesis. Protein fluctuations fuel the progression of malignant transformation, such as uncontrolled proliferation, metastasis, and chemo/radiotherapy resistance, which severely impair therapeutic effectiveness and cause disease recurrence and eventually mortality among cancer patients. Cellular heterogeneity is widely observed in cancer and numerous cell subtypes have been characterized that greatly influence cancer progression. Population-averaged research may not fully reveal the heterogeneity, leading to inaccurate conclusions. Thus, deep mining of the multiplex proteome at the single-cell resolution will provide new insights into cancer biology, to develop prognostic biomarkers and treatments. Considering the recent advances in single-cell proteomics, herein we review several novel technologies with particular focus on single-cell mass spectrometry analysis, and summarize their advantages and practical applications in the diagnosis and treatment for cancer. Technological development in single-cell proteomics will bring a paradigm shift in cancer detection, intervention, and therapy.

Development of Transmission Ambient Pressure Laser Desorption Ionization/Postphotoionization Mass Spectrometry Imaging

Laser-based high-resolution mass spectrometry imaging at ambient conditions has promising applications in life science. However, the ion yield during laser desorption/ablation is poor. Here, transmission atmospheric pressure laser desorption ionization combined with a compact postphotoionization (t-AP-LDI/PI) assembly with a krypton discharge lamp was developed for the untargeted imaging of various biomolecules. The spatial distributions of numerous lipid classes, fatty acids, neurotransmitters, and amino acids in the subregions of mouse cerebellum tissue were obtained. Compared with single laser ablation, the sensitivities for most analytes were increased by 1 to 3 orders of magnitude by dopant-assisted postphotoionization. After careful optimization, a spatial resolution of 4 μm could be achieved for the metabolites in mouse hippocampus tissue. Finally, the melanoma tissue slices were analyzed using t-AP-LDI/PI MSI, which revealed the metabolic heterogeneity of the melanoma microenvironment and exhibited the phenomenon of abnormal proliferation and invasion trends in tumor cells.

Recent developments in ionization techniques for single-cell mass spectrometry

The variation among individual cells plays a significant role in many biological functions. Single-cell analysis is advantageous for gaining insight into intricate biochemical mechanisms rarely accessible when studying tissues as a whole. However, measurement on a unicellular scale is still challenging due to unicellular complex composition, minute substance quantities, and considerable differences in compound concentrations. Mass spectrometry has recently gained extensive attention in unicellular analytical fields due to its exceptional sensitivity, throughput, and compound identification abilities. At present, single-cell mass spectrometry primarily concentrates on the enhancement of ionization methods. The principal ionization approaches encompass nanoelectrospray ionization (nano-ESI), laser desorption ionization (LDI), secondary ion mass spectrometry (SIMS), and inductively coupled plasma (ICP). This article summarizes the most recent advancements in ionization techniques and explores their potential directions within the field of single-cell mass spectrometry.

A Simple High-Flux Switchable VUV Lamp Based on an Electrodeless Fluorescent Lamp for SPI/PAI Mass Spectrometry

Single-photon ionization (SPI) is a unique soft ionization technique for organic analysis. A convenient high-flux vacuum ultraviolet (VUV) light source is a key precondition for wide application of SPI techniques. In this study, we present a novel VUV lamp by simply modifying an ordinary electrodeless fluorescent lamp. By replacing the glass bulb with a stainless steel bulb and introducing 5% Kr/He (v/v) as the excitation gas, an excellent VUV photon flux over 4.0 × 1014 photons s-1 was obtained. Due to its rapid glow characteristics, the VUV lamp can be switched on and off instantly as required by detection, ensuring the stability and service life of the lamp. To demonstrate the performance of the new lamp, the switchable VUV lamp was coupled with an SPI-mass spectrometer, which could be changed to photoinduced associative ionization (PAI) mode by doping gaseous CH2Cl2 to initiate an associative ionization reaction. Two types of volatile organic compounds sensitive to SPI and PAI, typically benzene series and oxygenated organics, respectively, were selected as samples. The instrument exhibited a high detection sensitivity for the tested compounds. With a measurement time of 11 s, the 3σ limits of detection ranged from 0.33 to 0.75 pptv in SPI mode and from 0.03 to 0.12 pptv in PAI mode. This study provides an extremely simple method to assemble a VUV lamp with many merits, e.g., portability, robustness, durability, low cost, and high flux. The VUV lamp may contribute to the development of SPI-related highly sensitive detection technologies.

Mass Spectral Imaging to Map Plant-Microbe Interactions

Plant-microbe interactions are of rising interest in plant sustainability, biomass production, plant biology, and systems biology. These interactions have been a challenge to detect until recent advancements in mass spectrometry imaging. Plants and microbes interact in four main regions within the plant, the rhizosphere, endosphere, phyllosphere, and spermosphere. This mini review covers the challenges within investigations of plant and microbe interactions. We highlight the importance of sample preparation and comparisons among time-of-flight secondary ion mass spectroscopy (ToF-SIMS), matrix-assisted laser desorption/ionization (MALDI), laser desorption ionization (LDI/LDPI), and desorption electrospray ionization (DESI) techniques used for the analysis of these interactions. Using mass spectral imaging (MSI) to study plants and microbes offers advantages in understanding microbe and host interactions at the molecular level with single-cell and community communication information. More research utilizing MSI has emerged in the past several years. We first introduce the principles of major MSI techniques that have been employed in the research of microorganisms. An overview of proper sample preparation methods is offered as a prerequisite for successful MSI analysis. Traditionally, dried or cryogenically prepared, frozen samples have been used; however, they do not provide a true representation of the bacterial biofilms compared to living cell analysis and chemical imaging. New developments such as microfluidic devices that can be used under a vacuum are highly desirable for the application of MSI techniques, such as ToF-SIMS, because they have a subcellular spatial resolution to map and image plant and microbe interactions, including the potential to elucidate metabolic pathways and cell-to-cell interactions. Promising results due to recent MSI advancements in the past five years are selected and highlighted. The latest developments utilizing machine learning are captured as an important outlook for maximal output using MSI to study microorganisms.

Microlensed fiber allows subcellular imaging by laser-based mass spectrometry

Mass spectrometry imaging (MSI) enables the chemical mapping of molecules and elements in a label-free, high-throughput manner. Because this approach can be accomplished rapidly, it also enables chemical changes to be monitored. Here, we describe a protocol for MSI with subcellular spatial resolution. This is achieved by using a microlensed fiber, which is made by grinding an optical fiber. It is a universal and economic technique that can be adapted to most laser-based mass spectrometry methods. In this protocol, the output of laser radiation from the microlensed fiber causes laser ablation of the sample, and the resulting plume is mass spectrometrically analyzed. The microlensed fiber can be used with matrix-assisted laser desorption ionization, laser desorption ionization, laser ablation electrospray desorption ionization and laser ablation inductively coupled plasma, in each case to achieve submicroscale imaging of single cells and biological tissues. This report provides a detailed introduction of the microlensed fiber design and working principles, sample preparation, microlensed fiber ion source setup and multiple MSI platforms with different kinds of mass spectrometers. A researcher with a little background (such as a trained graduate student) is able to complete all the steps for the experimental setup in ~2 h, including fiber test, laser coupling and ion source modification. The imaging time spent mainly depends on the size of the imaging area. It is suggested that most existing laser-based MSI platforms, especially atmospheric pressure applications, can achieve breakthroughs in spatial resolution by introducing a microlensed fiber module.

Metabolomics in drug research and development: The recent advances in technologies and applications

Emerging evidence has demonstrated the vital role of metabolism in various diseases or disorders. Metabolomics provides a comprehensive understanding of metabolism in biological systems. With advanced analytical techniques, metabolomics exhibits unprecedented significant value in basic drug research, including understanding disease mechanisms, identifying drug targets, and elucidating the mode of action of drugs. More importantly, metabolomics greatly accelerates the drug development process by predicting pharmacokinetics, pharmacodynamics, and drug response. In addition, metabolomics facilitates the exploration of drug repurposing and drug-drug interactions, as well as the development of personalized treatment strategies. Here, we briefly review the recent advances in technologies in metabolomics and update our knowledge of the applications of metabolomics in drug research and development.

Nanometer Resolution Mass Spectro-Microtomography for In-Depth Anatomical Profiling of Single Cells

Visually identifying the molecular changes in single cells is of great importance for unraveling fundamental cellular functions as well as disease mechanisms. Herein, we demonstrated a mass spectro-microtomography with an optimal voxel resolution of ∼300 × 300 × 25 nm³, which enables three-dimensional tomography of chemical substances in single cells. This mass imaging method allows for the distinguishment of abundant endogenous and exogenous molecules in subcellular structures. Combined with statistical analysis, we demonstrated this method for spatial metabolomics analysis of drug distribution and subsequent molecular damages caused by intracellular drug action. More interestingly, thanks to the nanoprecision ablation depth (∼12 nm), we realized metabolomics profiling of cell membrane without the interference of cytoplasm and improved the distinction of cancer cells from normal cells. Our current method holds great potential to be a powerful tool for spatially resolved single-cell metabolomics analysis of chemical components during complex biological processes.

Metabolomics-centered mining of plant metabolic diversity and function: Past decade and future perspectives

Plants are natural experts in organic synthesis, being able to generate large numbers of specific metabolites with widely varying structures that help them adapt to variable survival challenges. Metabolomics is a research discipline that integrates the capabilities of several types of research including analytical chemistry, statistics, and biochemistry. Its ongoing development provides strategies for gaining a systematic understanding of quantitative changes in the levels of metabolites. Metabolomics is usually performed by targeting either a specific cell, a specific tissue, or the entire organism. Considerable advances in science and technology over the last three decades have propelled us into the era of multi-omics, in which metabolomics, despite at an earlier developmental stage than genomics, transcriptomics, and proteomics, offers the distinct advantage of studying the cellular entities that have the greatest influence on end phenotype. Here, we summarize the state of the art of metabolite detection and identification, and illustrate these techniques with four case study applications: (i) comparing metabolite composition within and between species, (ii) assessing spatio-temporal metabolic changes during plant development, (iii) mining characteristic metabolites of plants in different ecological environments and upon exposure to various stresses, and (iv) assessing the performance of metabolomics as a means of functional gene identification , metabolic pathway elucidation, and metabolomics-assisted breeding through analyzing plant populations with diverse genetic variations. In addition, we highlight the prominent contributions of joint analyses of plant metabolomics and other omics datasets, including those from genomics, transcriptomics, proteomics, epigenomics, phenomics, microbiomes, and ion-omics studies. Finally, we discuss future directions and challenges exploiting metabolomics-centered approaches in understanding plant metabolic diversity.

Mass spectrometry-based strategies for single-cell metabolomics

Single cell analysis has drawn increasing interest from the research community due to its capability to interrogate cellular heterogeneity, allowing refined tissue classification and facilitating novel biomarker discovery. With the advancement of relevant instruments and techniques, it is now possible to perform multiple omics including genomics, transcriptomics, metabolomics or even proteomics at single cell level. In comparison with other omics studies, single-cell metabolomics (SCM) represents a significant challenge since it involves many types of dynamically changing compounds with a wide range of concentrations. In addition, metabolites cannot be amplified. Although difficult, considerable progress has been made over the past decade in mass spectrometry (MS)-based SCM in terms of processing technologies and biochemical applications. In this review, we will summarize recent progress in the development of promising MS platforms, sample preparation methods and SCM analysis of various cell types (including plant cell, cancer cell, neuron, embryo cell, and yeast cell). Current limitations and future research directions in the field of SCM will also be discussed.

Recent progress in mass spectrometry for single-cell metabolomics

Metabolites are the end products of cellular vital activities and can reflect the state of cellular to a certain extent. Rapid change of metabolites and the low abundance of signature metabolites cause difficulties in single-cell detection, which is a great challenge in single-cell metabolomics analysis. Mass spectrometry (MS) is a powerful tool that uniquely suited to detect intracellular small-molecule metabolites and has shown good application in single-cell metabolite analysis. In this mini-review, we describe three types of emerging technologies for MS-based single-cell metabolic analysis in recent years, including nano-ESI-MS based single-cell metabolomics analysis, high-throughput analysis via flow cytometry, and cellular metabolic imaging analysis. These techniques provide a large amount of single-cell metabolic data, allowing the potential of MS in single-cell metabolic analysis is gradually being explored and is of great importance in disease and life science research.

High-performance micro/nanoplastics characterization by MALDI-FTICR mass spectrometry

Micro/nanoplastics (MNPs) are widespread environmental pollutants that cause high health risks. However, high heterogeneity in particle sizes and chemical compositions of MNPs make their accurate characterization extremely challenging. Herein, we established a matrix-assisted laser desorption ionization-Fourier transform ion cyclotron resonance mass spectrometry (MALDI-FTICR MS) strategy for the unambiguous characterization of different types of MNPs with high performance, including polystyrene, polyethylene glycol terephthalate, polyamide, polymethyl methacrylate, acrylonitrile butadiene styrene copolymer, and polycarbonate. The MNP sample preparation and detection conditions were systematically optimized by using response surface methodology, and the MS detection signal-to-noise ratios were improved 1.5 times on average. The ultrahigh mass resolution of FTICR MS is crucial to the unambiguous elucidation of MNP structures. We demonstrate that this MS strategy is highly efficient in the characterization of polymer constitutions of environmental MNPs derived from foam, bottles, cable ties, and compact discs, providing a promising tool for MNP detection and safety evaluation.

Laser Ablation Electrospray Ionization Achieves 5 μm Resolution Using a Microlensed Fiber

A pulsed (10 Hz) infrared (IR) (1064 nm) laser is focused on a sample surface by means of a microlensed fiber. Analytes desorbed from the surface are captured by charged microdroplets before entering a mass spectrometer. By translating the sample surface, a chemical map is generated with a resolution of 5 μm, defined as the change from 20 to 80% of the analyte signal intensity. As a demonstration of the power of this new imaging technique, analytes from a parsnip root section are imaged and compared with that obtained from conventional laser ablation electrospray ionization mass spectrometry. The improvement in spatial resolution is about a factor of 20.

Vacuum ultraviolet nonlinear metalens

Vacuum ultraviolet (VUV) light plays an essential role across science and technology, from molecular spectroscopy to nanolithography and biomedical procedures. Realizing nanoscale devices for VUV light generation and control is critical for next-generation VUV sources and systems, but the scarcity of low-loss VUV materials creates a substantial challenge. We demonstrate a metalens that both generates-by second-harmonic generation-and simultaneously focuses the generated VUV light. The metalens consists of 150-nm-thick zinc oxide (ZnO) nanoresonators that convert 394 nm (~3.15 eV) light into focused 197-nm (~6.29 eV) radiation, producing a spot 1.7 μm in diameter with a 21-fold power density enhancement as compared to the wavefront at the metalens surface. The reported metalens is ultracompact and phase-matching free, allowing substantial streamlining of VUV system design and facilitating more advanced applications. This work provides a useful platform for developing low-loss VUV components and increasing the accessibility of the VUV regime.

LASER IONIZATION MASS SPECTROMETRY AT 55: QUO VADIS?

Laser ionization mass spectrometry (LIMS) was one of the first practical methods developed for in situ analysis of the surfaces of solid samples. This review will encompass several aspects related to this analytical method. First, we will discuss the process of laser ionization, the influence of the laser type on its performance, and imaging capabilities of this method. In the second chapter, we will follow the historic development of LIMS instrumentation. After a brief overview of the first-generation instruments developed in 1960-1990 years, we will discuss in detail more recent designs, which appeared during the last 2-3 decades. In the last part of our review, we will cover the recent applications of LIMS for surface analysis. These applications include various types of analyses of solid inorganic, organic, and heterogeneous samples, often in combination with depth profiling and imaging capability.

Nanoscale Three-Dimensional Imaging of Drug Distributions in Single Cells via Laser Desorption Post-Ionization Mass Spectrometry

Exploring the three-dimensional (3D) drug distribution within a single cell at nanoscale resolution with mass spectrometry imaging (MSI) techniques is crucial in cellular biology, yet it remains a great challenge due to limited lateral resolution, detection sensitivities, and reconstruction problems. Herein, a microlensed fiber laser desorption post-ionization time-of-flight mass spectrometer (MLF-LDPI-TOFMS) was developed for the 3D imaging of two anticancer drugs within single cells at a 500 × 500 × 500 nm³ voxel resolution. Nanoscale desorption was obtained with a microlensed fiber (MLF), and a 157 nm post-ionization laser was introduced to enhance the ionization yield. Furthermore, a new type of alignment method for 3D reconstruction was developed on the basis of our embedded uniform circular polystyrene microspheres (PMs). Our findings demonstrate that this 3D imaging technique has the potential to provide information about the 3D distributions of specific molecules at the nanoscale level.

High-Spatial Resolution Atmospheric Pressure Mass Spectrometry Imaging Using Fiber Probe Laser Ablation-Dielectric Barrier Discharge Ionization

Atmospheric pressure mass spectrometry imaging (AP-MSI) is a powerful tool in many fields; however, there are still some difficulties to achieve high spatial resolution for AP-MSI, one of them being the need for a small ablation crater. Here, a fiber probe laser ablation (FPLA) system is introduced that uses an etched optical fiber with a sharp tip (o.d. 200 nm) to deliver ablation laser pulses to a sample surface to ablate materials with high spatial resolution. The tip-to-sample distance was adjusted to ∼10 μm using a micro-actuator having a stepping motor with submicron accuracy. The laser-ablated neutrals were post-ionized using a home-built in-line dielectric barrier discharge source, which can be interfaced to any mass spectrometer with an AP interface. Using MSI on a standard sample with a striped pattern and sections of fingernails treated with the drug methyl green zinc chloride salt, a FPLA-DBDI-MSI spatial resolution of ≈5 μm was demonstrated.

Development of novel projection-type imaging mass spectrometer

We developed a novel imaging mass spectrometer based on our accumulating technology for projection-type imaging mass spectrometry, the simulation of an accurate ion trajectory, and the theory for ion optics. The newly developed apparatus yields high spatial resolution with a substantially shorter image-acquisition time compared with conventional scanning-type imaging mass spectrometers. In order to maintain a high mass resolution, a multi-turn time-of-flight mass spectrometer is combined with post-extraction differential acceleration methods. Consequently, a mass resolution of m/Δm ∼ 10 000 and a spatial resolution of 1 μm were achieved simultaneously in this study. Application of our newly established apparatus to biological samples accomplished successful imaging mass spectrometry by exhibiting an organ-specific distribution of endogenous ions as well as a localized distribution of exogenously applied ions with an ultra-high spatial resolution image in the size of 18.5 megapixels.

Laser Desorption Combined with Laser Postionization for Mass Spectrometry

Lasers with pulse lengths from nanoseconds to femtoseconds and wavelengths from the mid-infrared to extreme ultraviolet (UV) have been used for desorption or ablation in mass spectrometry. Such laser sampling can often benefit from the addition of a second laser for postionization of neutrals. The advantages offered by laser postionization include the ability to forego matrix application, high lateral resolution, decoupling of ionization from desorption, improved analysis of electrically insulating samples, and potential for high sensitivity and depth profiling while minimizing differential detection. A description of postionization by vacuum UV radiation is followed by a consideration of multiphoton, short pulse, and other postionization strategies. The impacts of laser pulse length and wavelength are considered for laser desorption or laser ablation at low pressures. Atomic and molecular analysis via direct laser desorption/ionization using near-infrared ultrashort pulses is described. Finally, the postionization of clusters, the role of gaseous collisions, sampling at ambient pressure, atmospheric pressure photoionization, and the addition of UV postionization to MALDI are considered.

Lipid Analysis of 30 000 Individual Rodent Cerebellar Cells Using High-Resolution Mass Spectrometry

Single-cell measurements aid our understanding of chemically heterogeneous systems such as the brain. Lipids are one of the least studied chemical classes, and their cell-to-cell heterogeneity remains largely unexplored. We adapted microscopy-guided single-cell profiling using matrix-assisted laser desorption/ionization ion cyclotron resonance mass spectrometry to profile the lipid composition of over 30 000 individual rat cerebellar cells. We detected 520 lipid features, many of which were found in subsets of cells; Louvain clustering identified 101 distinct groups that can be correlated to neuronal and astrocytic classifications and lipid classes. Overall, the two most common lipids found were [PC(32:0)+H]⁺ and [PC(34:1)+H]⁺, which were present within 98.9 and 89.5% of cells, respectively; lipid signals present in <1% of cells were also detected, including [PC(34:1)+K]⁺ and [PG(40:2(OH))+Na]⁺. These results illustrate the vast lipid heterogeneity found within rodent cerebellar cells and hint at the distinct functional consequences of this heterogeneity.