Nanozyme Sensor Arrays for Detecting Versatile Analytes from Small Molecules to Proteins and Cells

Liposome-embedded PtCu nanozymes for improved immunoassay of accurate myocardial infarction

Herein, we developed a platinum-copper nano-enzyme-linked immunosorbent assay (NLISA) based split diagnostic platform for the ultrasensitive detection of cardiac troponin I (cTnI). The PtCu nanozyme synthesized by one-pot synthesis exhibited ultra-high peroxidase-like activity (35.17 U mg-1), which was about 4.5 times higher than that of the unmodified Pt nanozyme (8.83 U mg-1). Due to the efficient peroxidase-like activity of the copper-platinum complexed nanozyme, transduction and sequential amplification of cTnI biological signals were achieved in combination with a liposome-embedded amplification strategy. The encapsulation efficiency was calculated by introducing a liposomal bilayer model, which showed that the introduction of a single liposomal molecule could amplify the signal up to 870-fold, thus promising a high sensitivity test. Notably, the dynamic response of cTnI was in the range of 0.1-5000 pg mL-1 with an ultra-low detection limit (0.048 pg mL-1). The developed NLISA analysis system provides a new way to discover efficient and sensitive alternatives to ELISA kits, which can meet the practical needs of community healthcare testing conditions and rapid testing in hospitals.

Construction and Application of Nanozyme Sensor Arrays

Compared with traditional "lock-key mode" biosensors, a sensor array consists of a series of sensing elements based on intermolecular interactions (typically hydrogen bonds, van der Waals forces, and electrostatic interactions). At the same time, sensor arrays also have the advantages of fast response, high sensitivity, low energy consumption, low cost, rich output signals, and imageability, which have attracted widespread attention from researchers. Nanozymes are nanomaterials which own enzyme-like properties. Because of the adjustable activity, high stability, and cost effectiveness of nanozymes, they are potential candidates for construction of sensor arrays to output different signals from analytes through the chemoresponse of colorants, which solves the shortcomings of traditional sensors that they cannot support multiple detection and lack universality. Recently, a sensor array based on nanozymes as nonspecific recognition receptors has attracted much more attention from researchers and has been applied to precise recognition of proteins, bacteria, and heavy metals. In this perspective, attention is given to nanozymes and the regulation of their enzyme-like activity. Particularly, the building principles and methods for sensor arrays based on nanozymes are analyzed, and the applications are summarized. Finally, the approaches to overcome the challenges and perspectives are also presented and analyzed for facilitating further research and development of nanozyme sensor arrays. This perspective should be helpful for gaining insight into research ideas within the field of nanozyme sensor arrays.

Bridged Pt-OH-Mn Mediator in N-coordinated Mn Single Atoms and Pt Nanoparticles for Electrochemical Biomolecule Oxidation and Discrimination

The rational design of efficient catalysts for uric acid (UA) electrooxidation, as well as the establishment of structure-activity relationships, remains a critical bottleneck in the field of electrochemical sensing. To address these challenges, herein, a hybrid catalyst that integrates carbon-supported Pt nanoparticles and nitrogen-coordinated Mn single atoms (PtNPs/MnNC) is developed. The metal-metal interaction during annealing affords the construction of metallic-bonded Pt-Mn pairs between PtNPs and Mn single atoms, facilitating the electron transfer from PtNPs to the support and thereby optimizing the electronic structure of catalysts. More importantly, experiments and theoretical calculations provide visual proof for the 'incipient hydrous oxide adatom mediator' mechanism for UA oxidation. The Pt-Mn pairs first adsorb OH* to construct the bridged Pt-OH-Mn mediators to serve as a highly active intermediate for N-H bond dissociation and proton transfer. Benefiting from the unique electronic and geometric structure of the catalytic center and reactive intermediates, PtNPs/MnNC exhibits superior electrooxidation performance. The electrochemical sensor based on PtNPs/MnNC enables sensitive detection and discrimination of UA and dopamine in serum samples. This work offers new insights into the construction of novel electrocatalysts for sensitive sensing platforms.

Algae-derived biochar nanozyme array for discrimination and detection of multiple pesticides in soil, water and food

Despite the potential of nanozymes combined with sensor arrays for discriminating multiple pesticides simultaneously, they have few practical pesticide sensing uses due to the limited performance of existing nanozymes and the complexity of their preparation. Here, agricultural waste is utilized for the facile synthesis of high-performance biochar nanozymes and the fabrication of biochar nanozyme sensor arrays. The production of autogenous N-doped biochars with abundant surface functional groups and good peroxidase-like activities is achieved with different types of algae. High-performance biochar nanozyme sensor arrays can discriminate pesticides in a concentration range from 1 to 500 μM and in real samples from soil, lake water, seawater, apples, cucumbers, peaches, tomatoes and cabbages. Furthermore, pesticides can be quantified down to 1 μM. The development of high-performance nanozyme sensor arrays based on waste conversion could be a step toward pesticide discrimination and detection, which would improve human and environmental safety.

Nanozyme-Enhanced Electrochemical Biosensors: Mechanisms and Applications

Nanozymes, as innovative materials, have demonstrated remarkable potential in the field of electrochemical biosensors. This article provides an overview of the mechanisms and extensive practical applications of nanozymes in electrochemical biosensors. First, the definition and characteristics of nanozymes are introduced, emphasizing their significant role in constructing efficient sensors. Subsequently, several common categories of nanozyme materials are delved into, including metal-based, carbon-based, metal-organic framework, and layered double hydroxide nanostructures, discussing their applications in electrochemical biosensors. Regarding their mechanisms, two key roles of nanozymes are particularly focused in electrochemical biosensors: selective enhancement and signal amplification, which crucially support the enhancement of sensor performance. In terms of practical applications, the widespread use of nanozyme-based electrochemical biosensors are showcased in various domains. From detecting biomolecules, pollutants, nucleic acids, proteins, to cells, providing robust means for high-sensitivity detection. Furthermore, insights into the future development of nanozyme-based electrochemical biosensors is provided, encompassing improvements and optimizations of nanozyme materials, innovative sensor design and integration, and the expansion of application fields through interdisciplinary collaboration. In conclusion, this article systematically presents the mechanisms and applications of nanozymes in electrochemical biosensors, offering valuable references and prospects for research and development in this field.

The Nanozyme Revolution: Enhancing the Performance of Medical Biosensing Platforms

Nanozymes represent a class of nanosized materials that exhibit innate catalytic properties similar to biological enzymes. The unique features of these materials have positioned them as promising candidates for applications in clinical sensing devices, specifically those employed at the point-of-care. They notably have found use as a means to amplify signals in nanosensor-based platforms and thereby improve sensor detection limits. Recent developments in the understanding of the fundamental chemistries underpinning these materials have enabled the development of highly effective nanozymes capable of sensing clinically relevant biomarkers at detection limits that compete with "gold-standard" techniques. However, there remain considerable hurdles that need to be overcome before these nanozyme-based sensors can be utilized in a platform ready for clinical use. An overview of the current understandings of nanozymes for disease diagnostics and biosensing applications and the unmet challenges that must be considered prior to their translation in clinical diagnostic tests is provided.

Aptamer-Modified Homogeneous Catalysts, Heterogenous Nanoparticle Catalysts, and Photocatalysts: Functional "Nucleoapzymes", "Aptananozymes", and "Photoaptazymes"

Conjugation of aptamers to homogeneous catalysts ("nucleoapzymes"), heterogeneous nanoparticle catalysts ("aptananozymes"), and photocatalysts ("photoaptazymes") yields superior catalytic/photocatalytic hybrid nanostructures emulating functions of native enzymes and photosystems. The concentration of the substrate in proximity to the catalytic sites ("molarity effect") or spatial concentration of electron-acceptor units in spatial proximity to the photosensitizers, by aptamer-ligand complexes, leads to enhanced catalytic/photocatalytic efficacies of the hybrid nanostructures. This is exemplified by sets of "nucleoapzymes" composed of aptamers conjugated to the hemin/G-quadruplex DNAzymes or metal-ligand complexes as catalysts, catalyzing the oxidation of dopamine to aminochrome, oxygen-insertion into the Ar─H moiety of tyrosinamide and the subsequent oxidation of the catechol product into aminochrome, or the hydrolysis of esters or ATP. Also, aptananozymes consisting of aptamers conjugated to Cu2+ - or Ce4+ -ion-modified C-dots or polyadenine-stabilized Au nanoparticles acting as catalysts oxidizing dopamine or operating bioreactor biocatalytic cascades, are demonstrated. In addition, aptamers conjugated to the Ru(II)-tris-bipyridine photosensitizer or the Zn(II) protoporphyrin IX photosensitizer provide supramolecular photoaptazyme assemblies emulating native photosynthetic reaction centers. Effective photoinduced electron transfer followed by the catalyzed synthesis of NADPH or the evolution of H2 is demonstrated by the photosystems. Structure-function relationships dictate the catalytic and photocatalytic efficacies of the systems.

Photoacid Generators for Biomedical Applications

Photoacid generators (PAGs) are compounds capable of producing hydrogen protons (H+ ) upon irradiation, including irreversible and reversible PAGs, which have been widely studied in photoinduced polymerization and degradation for a long time. In recent years, the applications of PAGs in the biomedical field have attracted more attention due to their promising clinical value. So, an increasing number of novel PAGs have been reported. In this review, the recent progresses of PAGs for biomedical applications is systematically summarized, including tumor treatment, antibacterial treatment, regulation of protein folding and unfolding, control of drug release and so on. Furthermore, a concept of water-dependent reversible photoacid (W-RPA) and its antitumor effect are highlighted. Eventually, the challenges of PAGs for clinical applications are discussed.

Smartphone-assisted nanozyme sensor array constructed based on reaction kinetics for the discrimination and identification of phenolic compounds

Although the research on nanozymes has attracted widespread attention in recent years, the development of highly active and multifunctional nanozymes remains a challenge. Here, a bifunctional AMP-Cu nanozyme with laccase- and catecholase-like activities was successfully prepared at room temperature with Cu2+ as the metal ion and adenosine-5'-monophosphate (AMP) as the ligand molecule. Based on the excellent catalytic performance of AMP-Cu, a three-channel colorimetric sensor array was constructed using reaction kinetics as the sensing unit to achieve high-throughput detection and identification of six common phenolic compounds at low concentrations. This strategy simplifies the construction of sensor array and demonstrates the capacity to obtain multidimensional data from a single material. Finally, with the assistance of smartphones and homemade dark boxes, a portable on-site detection method for phenolic compounds was developed. This work would contribute to the development of portable sensors and the highly efficient identification of phenolic compounds in complex samples.

Multifunctional nanozymes for disease diagnosis and therapy

The development of nanotechnology has brought about groundbreaking advancements in diseases' diagnostics and therapeutics. Among them, multifunctional nanomaterials with enzyme-like activities (i.e., nanozymes) featured with high stability, large surface area for bioconjugation, and easy storage, offer unprecedented opportunities for disease diagnostics and treatment. Recent years have witnessed the great progress of nanozyme-based theranostics. To highlight these achievements, this review first introduces the recent advancements on nanozymes in biosensing and diagnostics. Then, it summarizes the applications of nanozymes in therapeutics including anti-tumor and antibacterial treatment, anti-inflammatory treatment, and other diseases treatment. In addition, several targeted strategies to improve the therapeutic efficacy of nanozyme are discussed. Finally, the opportunities and challenges in the field of diagnosis and therapy are summarized.

Signal Amplification Strategy Design in Nanozyme-Based Biosensors for Highly Sensitive Detection of Trace Biomarkers

Nanozymes show great promise in enhancing disease biomarker sensing by leveraging their physicochemical properties and enzymatic activities. These qualities facilitate signal amplification and matrix effects reduction, thus boosting biomarker sensing performance. In this review, recent studies from the last five years, concentrating on disease biomarker detection improvement through nanozyme-based biosensing are examined. This enhancement primarily involves the modulations of the size, morphology, doping, modification, electromagnetic mechanisms, electron conduction efficiency, and surface plasmon resonance effects of nanozymes for increased sensitivity. In addition, a comprehensive description of the synthesis and tuning strategies employed for nanozymes has been provided. This includes a detailed elucidation of their catalytic mechanisms in alignment with the fundamental principles of enhanced sensing technology, accompanied by the presentation of quantitatively analyzed results. Moreover, the diverse applications of nanozymes in strip sensing, colorimetric sensing, electrochemical sensing, and surface-enhanced Raman scattering have been outlined. Additionally, the limitations, challenges, and corresponding recommendations concerning the application of nanozymes in biosensing have been summarized. Furthermore, insights have been offered into the future development and outlook of nanozymes for biosensing. This review aims to serve not only as a reference for enhancing the sensitivity of nanozyme-based biosensors but also as a catalyst for exploring nanozyme properties and their broader applications in biosensing.

Distinct dual enzyme-like activities of Fe-N-C single-atom nanozymes enable discriminative detection of cellular glutathione

Fe-N-C single-atom nanozymes readily achieved discriminative detection of glutathione (GSH) over other biothiols with similar structure due to the difference between POD-like and OXD-like activities regarding the kind of reactive oxygen species. This colorimetric sensor demonstrated the heterogeneity of GSH levels in different cells and accurately monitored cellular GSH fluctuation.

Enhancement of the Peroxidase Activity of g-C3N4 with Different Morphologies for Simultaneous Detection of Multiple Antibiotics

The classes and forms of antibiotics directly determine their ecotoxicity and environmental chemical behavior, and developing a sensor array for simultaneous and in situ detection of antibiotics is highly anticipated. In this study, different morphologies of g-C3N4 with different fluorescence properties and peroxidase activity were prepared by regulating the degree of interlayer stacking and planar connectivity. Subsequently, in order to enhance its enzyme activity and amplify the differences in response signals to different antibiotics, three morphologies of g-C3N4/MIL-101(Fe) were prepared by in situ growth of equivalent amounts of MIL-101(Fe) on g-C3N4, respectively. The sensor array constructed based on the cross-response signals between g-C3N4/MIL-101(Fe) and antibiotics not only realized the simultaneous detection of quinolones, furans, tetracyclines, and lincomamides but also could efficiently identify their seven different forms. In the range of 0.2-0.8 ppm, the minimum detection limit for antibiotics was 12 ppb. In addition, the recovery experiments of multicomponent-mixed antibiotics in environmental samples show that the recovery rate remained at 91.42-107.59%, confirming the reliability and practicality of the sensor array. This study not only revealed the influence of crystal morphology regulation on the optical properties and enzyme activities of nanozymes, but also provided support for tracing, ecological remediation, and in situ environmental chemical behavior research of antibiotics.

Recent progress in nanozymes for the treatment of diabetic wounds

The slow healing of diabetic wounds has seriously affected human health. Meanwhile, the open wounds are susceptible to bacterial infection. Clinical therapeutic methods such as antibiotic therapy, insulin treatment, and surgical debridement have made great achievements in the treatment of diabetic wounds. However, drug-resistant bacteria will develop after long-term use of antibiotics, resulting in decreased efficacy. To improve the therapeutic effect, increasing drug concentration is a common strategy in clinical practice, but it also brings serious side effects. In addition, hyperglycemia control or surgical debridement can easily bring negative effects to patients, such as hypoglycemia or damage of normal tissue. Therefore, it is essential to develop novel therapeutic strategies to effectively promote diabetic wound healing. In recent years, nanozyme-based diabetic wound therapeutic systems have received extensive attention because they possess the advantages of nanomaterials and natural enzymes. For example, nanozymes have the advantages of a small size and a high surface area to volume ratio, which can enhance the tissue penetration of nanozymes and increase the reactive active sites. Moreover, compared with natural enzymes, nanozymes have more stable catalytic activity, lower production cost, and stronger operability. In this review, we first reviewed the basic characteristics of diabetic wounds and then elaborated on the catalytic mechanism and action principle of different types of nanozymes in diabetic wounds from three aspects: controlling bacterial infection, controlling hyperglycemia, and relieving inflammation. Finally, the challenges, prospects and future implementation of nanozymes for diabetic wound healing are outlined.

A PdPt nanoparticle-decorated thiol-functionalized MOF with high peroxidase-like activity for colorimetric sensing of D-glucose and chlorophenol isomers

The peroxidase (POD)-like catalytic activity of various nanozymes was extensively applied in many significant fields. In this study, a thiol-functionalized MOF-loaded PdPt nanocomposite (UiO-66-(SH)₂@PdPt) was fabricated, which possesses superior and selective POD-like activity with strong affinity towards H₂O₂ and 3,3',5,5'-tetramethylbenzidine under mild conditions. The POD-like property of UiO-66-(SH)₂@PdPt was used to sensitively detect the concentration of D-glucose under near-neutral (pH = 6.5) conditions. The detection limit of D-glucose was as low as 2.7 μM, and the linear range of D-glucose was 5-700 μM. In addition, UiO-66-(SH)₂@PdPt could accelerate the oxidative coupling chromogenic reaction of chlorophenol (CP) and 4-aminoantipyrine (4-AAP) in the presence of H₂O₂. Based on this phenomenon, a simple and visualized sensing array for the identification of chlorophenol contaminant isomers was further constructed to finally achieve the effective differentiation of three monochlorophenol isomers and six dichlorophenol isomers. Furthermore, a colorimetric detection method for 2-chlorophenol and 2,4-dichlorophenol was established. This work provides an effective means to improve the catalytic activity and selectivity of nanozymes by introducing an ideal carrier, which will be of significant value for the design of efficient nanozymes.

Nanozyme colorimetric sensor array based on monatomic cobalt for the discrimination of sulfur-containing metal salts

The identification of sulfur-containing metal salts (SCMs) is of great interest because they play an important role in many biological processes and diseases. Here, we constructed a ternary channel colorimetric sensor array to detect multiple SCMs simultaneously, relying on monatomic Co embedded in nitrogen-doped graphene nanozyme (CoN₄-G). Due to the unique structure, CoN₄-G exhibits activity similar to native oxidases, capable of catalysing directly the oxidization of 3,3',5,5'-tetramethylbenzidine (TMB) by O₂ molecules independent of H₂O₂. Density functional theory (DFT) calculations suggest that CoN₄-G has no potential barrier in the whole reaction route, thus presenting higher oxidase-like catalytic activity. Based on different degrees of TMB oxidation, different colorimetric response changes are obtained as "fingerprints" on the sensor array. The sensor array can discriminate different concentrations of unitary, binary, ternary, and quaternary SCMs and has been successfully applied to detect six real samples (soil, milk, red wine and egg white). To advance the field detection of the above four types of SCMs, we creatively propose a smartphone-based autonomous detection platform with a linear range of 1.6-320 μM and a limit of detection of 0.0778-0.218 μM, which demonstrates the potential use of sensor arrays in the application of disease diagnosis and food and environment monitoring.

Nanozymes towards Personalized Diagnostics: A Recent Progress in Biosensing

This review highlights the recent advancements in the field of nanozymes and their applications in the development of point-of-care biosensors. The use of nanozymes as enzyme-mimicking components in biosensing systems has led to improved performance and miniaturization of these sensors. The unique properties of nanozymes, such as high stability, robustness, and surface tunability, make them an attractive alternative to traditional enzymes in biosensing applications. Researchers have explored a wide range of nanomaterials, including metals, metal oxides, and metal-organic frameworks, for the development of nanozyme-based biosensors. Different sensing strategies, such as colorimetric, fluorescent, electrochemical and SERS, have been implemented using nanozymes as signal-producing components. Despite the numerous advantages, there are also challenges associated with nanozyme-based biosensors, including stability and specificity, which need to be addressed for their wider applications. The future of nanozyme-based biosensors looks promising, with the potential to bring a paradigm shift in biomolecular sensing. The development of highly specific, multi-enzyme mimicking nanozymes could lead to the creation of highly sensitive and low-biofouling biosensors. Integration of nanozymes into point-of-care diagnostics promises to revolutionize healthcare by improving patient outcomes and reducing costs while enhancing the accuracy and sensitivity of diagnostic tools.

Single-Site SnOCu Pairs with Interfacial Electron Transfer Effect for Enhanced Electrochemical Catalysis and Sensing

As advanced electrochemical catalysts, single-atom catalysts have made great progress in the field of catalysis and sensing due to their high atomic utilization efficiency and excellent catalytic performance. Herein, stannum-doped copper oxide (CuOSn₁ ) nanosheets with single-site SnOCu pairs as active sites are synthesized as electrocatalysts for biological molecule detection. Compared with CuO-based electrochemical sensors, the CuOSn₁ -based electrochemical sensors have improved detection sensitivity with a rapid electrochemical response. Theoretical calculation reveals that the single-site SnOCu pairs induced interfacial electronic transfer effect can strengthen hydroxy adsorption and thus reduce the energy barrier of the biological molecule oxidation process. As a concept application, electrochemical detection of dopamine and uric acid molecules is achieved, exhibiting satisfactory sensitivity and selectivity. This work demonstrates the advantages of single-site SnOCu pairs in electrochemical catalysis and sensing, which provides theoretical guidance for understanding the structure-activity relationship for sensitive electrochemical sensing.

Nanoconfinement-Guided Construction of Nanozymes for Determining H2 O2 Produced by Sonication

Nanomaterials with enzyme-like activities, termed as nanozymes, have found wide applications in various fields. It has been a long-term aim to rationally design and synthesize highly active nanozymes and thus to further improve their application performance. Guided by the nanoconfinement effect, we confine cytochrome c (Cyt c) within a mesoporous metal-organic framework (MOF), PCN-222 nanoparticle (NP), forming a protein/MOF hybrid nanozyme, termed as Cyt c@PCN-222 NP. The confined Cyt c exhibits around 3-4-fold higher peroxidase-like activity than free Cyt c. Due to the increase in the activity of Cyt c, the Cyt c@PCN-222 NPs exhibit a quite low limit of detection (≈0.13 μM) towards H₂ O₂ . Sonication-induced H₂ O₂ formation in water by using a lab-quipped ultrasonic cleaner can be sensitively probed, which suggests that H₂ O₂ -sensitive materials should be carefully handled during the utilization of ultrasonic equipment. We speculate that this nanoconfinement strategy can broaden our synthetic methodology for the rational design of nanozymes.

Hydrogen peroxide-assisted and histidine-stabilized copper-containing nanozyme for efficient degradation of various organic dyes

Nanozymes have potential applications in many fields, and a novel copper-containing nanozyme with highly dispersity and uniformity was self-assembled for efficient degradation of various organic dyes in this work. In the nanozyme, histidine was used to coordinate with copper ions, and hydrogen peroxide was prone to Fenton-like reaction to generate hydroxylated copper oxide intermediates. The nanozyme showed good peroxidase-like activity, and also had the ability to catalyze the degradation of various organic dyes efficiently with good storage and recycling ability. Furthermore, the degradation kinetics and mechanism of nanozyme had been further studied, and found that hydroxyl radical and singlet oxygen play vital roles in the catalytic degradation process. Meanwhile, this nanozyme can efficiently degrade two organic compounds at the same time, and this system is capable of dealing with complex practical application scenarios where wastewater contains a variety of organic pollutants.

Peptomer substrates for quantitative pattern-recognition sensing of proteases

The utility of active proteases as biomarkers is often limited by overlapping substrate specificity. Here, this feature is leveraged to develop a quantitative pattern-recognition sensing system driven by the degradation patterns of peptide-peptoid hybrid substrates to classify proteases and estimate their concentration by multivariate data analysis.

Peptide Array-Based In Situ Fluorescence Assay for Profiling Multiple Matrix Metalloproteinase Activities

Peptide array-based in situ fluorescence assay is a reliable and efficient technique for high-throughput profiling and localization of enzyme activity. Here, peptide array is fabricated by spotting five specific MMPs (MMP-2, MMP-3, MMP-7, MMP-9, and MMP-14) peptide substrates containing FAM/Dabcyl fluorescent resonance energy transfer (FRET) pair on the surface of cell monolayers or tissue sections. MMP activities are determined in situ by the fluorescence intensity of stained cells/tissues due to the cellular internalization of hydrolyzed peptide fragments with FAM moieties. Identification of MMP expression patterns of cells, highly sensitive determination of MMP activities in cell monolayer (as low as hundreds of cells per square centimeter), and evaluation of inhibition potencies of six compounds toward five MMPs are achieved by this method. Five MMP activities in the localized parts of 32 thyroid tissues are also well profiled without separation or extraction procedures.

Aptamer-Functionalized Ce4+-Ion-Modified C-Dots: Peroxidase Mimicking Aptananozymes for the Oxidation of Dopamine and Cytotoxic Effects toward Cancer Cells

Aptamer-functionalized Ce⁴⁺-ion-modified C-dots act as catalytic hybrid systems, aptananozymes, catalyzing the H₂O₂ oxidation of dopamine. A series of aptananozymes functionalized with different configurations of the dopamine binding aptamer, DBA, are introduced. All aptananozymes reveal substantially enhanced catalytic activities as compared to the separated Ce⁴⁺-ion-modified C-dots and aptamer constituents, and structure-catalytic functions between the structure and binding modes of the aptamers linked to the C-dots are demonstrated. The enhanced catalytic functions of the aptananozymes are attributed to the aptamer-induced concentration of the reaction substrates in spatial proximity to the Ce⁴⁺-ion-modified C-dots catalytic sites. The oxidation processes driven by the Ce⁴⁺-ion-modified C-dots involve the formation of reactive oxygen species (^•OH radicals). Accordingly, Ce⁴⁺-ion-modified C-dots with the AS1411 aptamer or MUC1 aptamer, recognizing specific biomarkers associated with cancer cells, are employed as targeted catalytic agents for chemodynamic treatment of cancer cells. Treatment of MDA-MB-231 breast cancer cells and MCF-10A epithelial breast cells, as control, with the AS1411 aptamer- or MUC1 aptamer-modified Ce⁴⁺-ion-modified C-dots reveals selective cytotoxicity toward the cancer cells. In vivo experiments reveal that the aptamer-functionalized nanoparticles inhibit MDA-MB-231 tumor growth.

Portable and Label-Free Sensor Array for Discriminating Multiple Analytes via a Handheld Gas Pressure Meter

Cross-reactive sensor arrays are useful for discriminating multiple analytes in a complex sample. Herein, a portable and label-free gas pressure sensor array was proposed for multiplex analysis via a handheld gas pressure meter. It is based on the interaction diversity of analytes with catalase-like nanomaterials, including Pt nanoparticles (PtNP), Co₃O₄ nanosheets (Co₃O₄NS), and Pt-Co alloy nanosheets (PtCoNS), respectively. Thus, the diverse influence of analytes on the catalase-like activity could be output as the difference in the gas pressure. By using principal component analysis, eight proteins were well distinguished by the gas pressure sensor array at the 10 nM level within 12 min. Moreover, different concentrations of proteins and mixtures of proteins could likewise be discriminated. More importantly, the effective discrimination of proteins in human serum and discrimination of five kinds of cells further confirmed the potential of the gas pressure sensor array. Therefore, it provides a portable, cheap, sensitive, and label-free gas pressure sensor array, which is totally different from the reported sensor arrays and holds great potential for portable and cheap discrimination of multiple analytes.

A colorimetric sensing platform for the determination of H2O2 using 2D-1D MoS2-CNT nanozymes

A novel colorimetric platform based on nano-composites of two-dimensional (2D) molybdenum disulfide nanosheets (MoS₂ NSs) and one-dimensional (1D) carbon nanotubes (CNTs), called 2D-1D MoS₂-CNT nanozyme, was fabricated for the selective and sensitive determination of hydrogen peroxide (H₂O₂) in soda water. The MoS₂-CNT nanozyme was synthesized through a one-step solvothermal reduction method. The introduced CNTs could effectively prevent the stacking of MoS₂ nanosheets (NSs) and not only expanded the interlayer distance of MoS₂ NSs from 0.620 nm to 0.710 nm but also improved their specific surface. Under acidic conditions, the as-prepared 2D-1D MoS₂-CNT nanozymes could oxidize the colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue-oxidized TMB (oxTMB) in the presence of H₂O₂, resulting in enhanced peroxidase-like (POD-like) activity. The kinetic study showed that MoS₂-CNT nanozyme had stronger catalytic activity than natural horseradish peroxidase (HRP). The linear range for H₂O₂ colorimetric determination was 5.00-500 μmol L^-1 with a limit of detection (LOD) of 1.40 μmol L^-1. Furthermore, the established determination method was applied to actual samples and the recoveries of H₂O₂ spiked in soda water were in the range of 92.3-107%, showing feasibility for the analysis of food.

A novel colorimetric sensor array for real-time and on-site monitoring of meat freshness

Food quality control is essential in industry and daily life. In this work, we developed a novel colorimetric sensor array composed of several pH-sensitive dyes for monitoring meat freshness. A color change in the sensor array was seen after exposure to volatile organic compounds (VOCs), and the images were captured for precise quantification of the VOCs. In conjunction with pattern recognition, meat freshness at different storage periods was readily discerned, revealing that the as-fabricated colorimetric sensor array possessed excellent discrimination ability. The linear range for quantitative analysis of volatiles related to meat spoilage was from 5 ppm to 100 ppm, with a limit of detection at the ppb level (S/N = 3). Furthermore, the testing results obtained by the sensor in assessing meat freshness were validated by a standard method for measuring the total volatile basic nitrogen (TVB-N). The sensing signals showed good agreement with the results obtained in TVB-N when measuring real food samples. The sensor also displayed good reproducibility (RSD < 5%) and long-term stability. The sensor was successfully used for on-site and real-time determination of volatiles emitted from rotting meat, demonstrating its potential application in monitoring the quality and safety of meat products.

Spinel-Oxide-Based Laccase Mimics for the Identification and Differentiation of Phenolic Pollutants

Phenol and its derivatives, known as persistent organic pollutants, have long threatened human health and environmental safety. There is an urgent need to develop convenient, low-cost, and multiplex analytical methods. Since phenols are substrates of laccase, they can be detected via laccase-catalyzed colorimetric assays. Nevertheless, the laccase-based assays cannot distinguish different phenols. Moreover, natural laccases suffer from high cost and low stability issues. To meet these needs, here we developed a laccase-like nanozyme sensor array for phenol detection and differentiation, which takes advantage of both nanozymes and cross-reactive sensor arrays. First, we examined a series of spinel-type transition metal oxides and found that manganese on octahedral sites profoundly affects the laccase-like activity of the materials. Based on the developed manganese-based spinel oxides (i.e., Mn₃O₄, Zn_0.4Li_0.6Mn₂O₄, and LiMn₂O₄), a colorimetric sensor array was constructed. The sensor array could effectively identify and discriminate phenol and its derivatives and showed good performance in the identification and differentiation of phenols in tap water samples. This work provides an important guidance for the development of laccase-like nanozymes and a promising methodology for pollutant monitoring.

Synthesis of Gold-Platinum Core-Shell Nanoparticles Assembled on a Silica Template and Their Peroxidase Nanozyme Properties

Bimetallic nanoparticles are important materials for synthesizing multifunctional nanozymes. A technique for preparing gold-platinum nanoparticles (NPs) on a silica core template (SiO₂@Au@Pt) using seed-mediated growth is reported in this study. The SiO₂@Au@Pt exhibits peroxidase-like nanozyme activity has several advantages over gold assembled silica core templates (SiO₂@Au@Au), such as stability and catalytic performance. The maximum reaction velocity (V_max) and the Michaelis–Menten constants (K_m) were and 2.1 × 10⁻¹⁰ M⁻¹∙s⁻¹ and 417 µM, respectively. Factors affecting the peroxidase activity, including the quantity of NPs, solution pH, reaction time, and concentration of tetramethyl benzidine, are also investigated in this study. The optimization of SiO₂@Au@Pt NPs for H₂O₂ detection obtained in 0.5 mM TMB; using 5 µg SiO₂@Au@Pt, at pH 4.0 for 15 min incubation. H₂O₂ can be detected in the dynamic liner range of 1.0 to 100 mM with the detection limit of 1.0 mM. This study presents a novel method for controlling the properties of bimetallic NPs assembled on a silica template and increases the understanding of the activity and potential applications of highly efficient multifunctional NP-based nanozymes.

Au3+ -Functionalized UiO-67 Metal-Organic Framework Nanoparticles: O2•- and •OH Generating Nanozymes and Their Antibacterial Functions

The synthesis and characterization of Au³⁺ -modified UiO-67 metal-organic framework nanoparticles, Au³⁺ -NMOFs, are described. The Au³⁺ -NMOFs reveal dual oxidase-like and peroxidase-like activities and act as an active catalyst for the catalyzed generation of O₂^•- under aerobic conditions or •OH in the presence of H₂ O₂ . The two reactive oxygen species (ROS) agents O₂^•- and •OH are cooperatively formed by Au³⁺ -NMOFs under aerobic conditions, and in the presence of H₂ O_2. The Au³⁺ -NMOFs are applied as an effective catalyst for the generation ROS agents for antibacterial and wound healing applications. Effective antibacterial cell death and inhibition of cell proliferation of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) bacterial colonies are demonstrated in the presence of the Au³⁺ -NMOFs. In addition, in vivo experiments demonstrate effective wound healing of mice wounds infected by S. aureus, treated by the Au³⁺ -NMOFs.

A Polymer-Based Multichannel Sensor for Rapid Cell-Based Screening of Antibiotic Mechanisms and Resistance Development

Antibiotic resistance presents a critical threat to public health, necessitating the rapid development of novel antibiotics and an appropriate choice of therapeutics to combat refractory bacterial infections. Here, we report a high-throughput polymer-based sensor platform that rapidly (30 min) profiles mechanisms of antibiotic activity. The sensor array features three fluorophore-conjugated polymers that can detect subtle antibiotic-induced phenotypic changes on bacterial surfaces, generating distinct mechanism-based fluorescence patterns. Notably, discrimination of different generations of antibiotic resistance was achieved with high efficiency. This sensor platform combines trainability, simplicity, and rapid screening into a readily translatable platform.

Synergistic Radiosensitization Mediated by Chemodynamic Therapy via a Novel Biodegradable Peroxidases Mimicking Nanohybrid

Purpose

Reactive oxygen species (ROS) are practically essential in radiotherapy to damage cancer cells; however, they are always inadequate for some malignant entities. Here, we designed a biodegradable mesoporous silica decorated with hemin and glucose oxidase (GOD@Hemin-MSN) to generate a chemodynamic therapy in order to enhance the killing capacity of radiotherapy.

Methods

Mesoporous silica, as an outstanding drug carrier, can deliver hemin and glucose oxidase to the tumor site. With high level of metabolism activity, cancer cells are abundant in glucose, which can be oxidized into H₂O₂ by glucose oxidase (GOD) on site. The generated H₂O₂ is subsequently converted into intracellular ROS, especially hydroxyl radical within the tumor microenvironment, by hemin, which has mimetic peroxidase properties. By this means, the ROS can be supplemented or enriched to facilitate the killing of tumor cells.

Results

The chemodynamic therapy induced by GOD@Hemin-MSN produced quantities of ROS, which compensated for their inadequacy as a result of radiotherapy, and exhibited remarkable antitumor efficacy, with a tumor inhibition rate of 91.5% in A549 tumor-bearing mice.

Conclusion

This work has validated GOD@Hemin-MSN as a radiosensitizer in chemodynamic therapy, which showed biocompatibility and potential for translational application.

Engineering single-atom catalysts toward biomedical applications

Due to inherent structural defects, common nanocatalysts always display limited catalytic activity and selectivity, making it practically difficult for them to replace natural enzymes in a broad scope of biologically important applications. By decreasing the size of the nanocatalysts, their catalytic activity and selectivity will be substantially improved. Guided by this concept, the advances of nanocatalysts now enter an era of atomic-level precise control. Single-atom catalysts (denoted as SACs), characterized by atomically dispersed active sites, strikingly show utmost atomic utilization, precisely located metal centers, unique metal-support interactions and identical coordination environments. Such advantages of SACs drastically boost the specific activity per metal atom, and thus provide great potential for achieving superior catalytic activity and selectivity to functionally mimic or even outperform natural enzymes of interest. Although the size of the catalysts does matter, it is not clear whether the guideline of "the smaller, the better" is still correct for developing catalysts at the single-atom scale. Thus, it is clearly a new, urgent issue to address before further extending SACs into biomedical applications, representing an important branch of nanomedicine. This review begins by providing an overview of recent advances of synthesis strategies of SACs, which serve as a basis for the discussion of emerging achievements in improving the enzyme-like catalytic properties at an atomic level. Then, we carefully compare the structures and functions of catalysts at various scales from nanoparticles, nanoclusters, and few-atom clusters to single atoms. Contrary to conventional wisdom, SACs are not the most catalytically active catalysts in specific reactions, especially those requiring multi-site auxiliary activities. After that, we highlight the unique roles of SACs toward biomedical applications. To appreciate these advances, the challenges and prospects in rapidly growing studies of SACs-related catalytic nanomedicine are also discussed in this review.

The Need to Pair Molecular Monitoring Devices with Molecular Imaging to Personalize Health

By enabling the non-invasive monitoring and quantification of biomolecular processes, molecular imaging has dramatically improved our understanding of disease. In recent years, non-invasive access to the molecular drivers of health versus disease has emboldened the goal of precision health, which draws on concepts borrowed from process monitoring in engineering, wherein hundreds of sensors can be employed to develop a model which can be used to preventatively detect and diagnose problems. In translating this monitoring regime from inanimate machines to human beings, precision health posits that continual and on-the-spot monitoring are the next frontiers in molecular medicine. Early biomarker detection and clinical intervention improves individual outcomes and reduces the societal cost of treating chronic and late-stage diseases. However, in current clinical settings, methods of disease diagnoses and monitoring are typically intermittent, based on imprecise risk factors, or self-administered, making optimization of individual patient outcomes an ongoing challenge. Low-cost molecular monitoring devices capable of on-the-spot biomarker analysis at high frequencies, and even continuously, could alter this paradigm of therapy and disease prevention. When these devices are coupled with molecular imaging, they could work together to enable a complete picture of pathogenesis. To meet this need, an active area of research is the development of sensors capable of point-of-care diagnostic monitoring with an emphasis on clinical utility. However, a myriad of challenges must be met, foremost, an integration of the highly specialized molecular tools developed to understand and monitor the molecular causes of disease with clinically accessible techniques. Functioning on the principle of probe-analyte interactions yielding a transducible signal, probes enabling sensing and imaging significantly overlap in design considerations and targeting moieties, however differing in signal interpretation and readout. Integrating molecular sensors with molecular imaging can provide improved data on the personal biomarkers governing disease progression, furthering our understanding of pathogenesis, and providing a positive feedback loop toward identifying additional biomarkers and therapeutics. Coupling molecular imaging with molecular monitoring devices into the clinical paradigm is a key step toward achieving precision health.

A portable visual coffee ring based on carbon dot sensitized lanthanide complex coordination to detect bisphenol A in water

In this work, a ratiometric fluorescence sensor along with a portable coffee ring visualized detection method for bisphenol A (BPA) was developed based on carbon dots. The probe was formed by the coordination polymerization of Eu3+ and 5'-adenosine monophosphate on the surface of carbon dots containing a large number of hydroxyl and carbonyl groups. The results showed that the fluorescence intensity ratio and the concentration of BPA had a good linear relationship in a wide range of 0.1-100 μM with a detection limit of 20 nM (S/N = 3). The recoveries of the added standard BPA in water samples ranged from 91.80 to 102.7% with relative standard deviation values no more than 1.84% (n = 3). In addition, the changes of the fluorescence color of the CDs@Eu-AMP suspension with different BPA concentrations can be easily visualized under a UV lamp by the naked eye, which highlights the great potential of the coffee ring detection method for the fast and convenient monitoring of BPA in real water samples.

CoO Nanozymes with Multiple Catalytic Activities Regulate Atopic Dermatitis

Herein, we prepared CoO nanozymes with three types of enzyme catalytic activities for the first time, which have SOD-like, CAT-like, and POD-like catalytic activities. This is the first study to report the preparation of CoO nanoparticles with three types of enzyme catalytic activities by the one-pot method. By modifying the surface of CoO nanozymes with a carboxyl group, its biocompatibility enhanced, so it can be used in the field of life sciences. In vitro cytotoxicity and anti-H₂O₂-induced ROS experiments proved that CoO nanozymes can protect HaCaT cells against ROS and cytotoxicity induced by H₂O₂. In addition, an atopic dermatitis (AD) mouse model was established by topical application of MC903, which verified the anti-inflammatory effect of CoO nanozymes on the AD mouse model. Traditional drugs for the treatment of AD, such as dexamethasone, have significant side-effects. The side-effects include skin burns, telangiectasias, and even serious drug dependence. CoO nano-enzymes have a low cytotoxicity and its multiple enzyme-like catalytic activities can effectively protect cells and tissues in ROS environments, which proves that CoO nano-enzymes have high application potential in the field of anti-inflammation.

Supramolecule self-assembly synthesis of amyloid phenylalanine-Cu fibrils with laccase-like activity and their application for dopamine determination

Laccases are multicopper proteins for dioxygen-involved oxidation of a broad spectrum of organic compounds. I Novel amyloid-like phenylalanine-Cu (F-Cu(II)) fibrils were developed, which were obtained via supramolecular self-assembly of Cu²⁺ and phenylalanine (F) under basic condition. The obtained amyloid-like fibrils represented highly periodic structure, of which the lattice unit was constructed via alternating hydrophobic (aromatic environment) and hydrophilic (both hydrogen bonding and Cu(II) coordination) interactions. Relative to natural laccases, the amyloid-like F-Cu(II) architecture exhibited comparable substrate affinity (Michaelis constant, K_m = 0.75 mM) and higher catalytic efficiency (k_cat/K_m = 773.33 × 10^-3 g^-1 min^-1L). Moreover, it exhibited remarkable tolerances in pH (4 ~ 10), temperature (room temperature ~ 200 ℃), organic solvent, and long-term storage (> 15 days). These stabilities were superior among the reported nature and artificial laccases, presenting a more promising candidate in various chemo- or bio-applications. In addition, F-Cu(II) fibrils could catalyze the oxidation of dopamine (DA) to a brown product, in which a new absorption band at 470 nm was observed. Based on this, a simple colorimetric assay for the detection of DA could be performed. We reported a novel amyloid-like phenylalanine-Cu fibrils, in which F-Cu⁺ complex can mimick the T1 site of natural laccase to oxidize the substrates. Then electrons transferred to F-Cu²⁺ complex via N-H···O=C hydrogen binding pathway. Finally, the dioxygen was transformed to water though radical reaction.

Highly Specific Colorimetric Probe for Fluoride by Triggering the Intrinsic Catalytic Activity of a AgPt-Fe3O4 Hybrid Nanozyme Encapsulated in SiO2 Shells

Current colorimetric probes for fluoride (F^-) primarily rely on organic chromophores that often suffer from unsatisfactory selectivity, complex organic synthesis, and low aqueous compatibility. Herein, we proposed a highly specific colorimetric method for F^- with 100% aqueous compatibility by triggering the intrinsic peroxidase-like activity of a AgPt-Fe₃O₄ nanozyme encapsulated in SiO₂ shells. The excellent catalytic performance of the AgPt-Fe₃O₄ nanozyme serves as an ideal platform for sensitive colorimetric sensing. After being encapsulated in SiO₂, the enzyme-like activity of AgPt-Fe₃O₄ is inhibited and only F^- can exclusively etch the SiO₂ shell to expose the active site of the nanozyme, thereby inducing color changes via oxidation of the chromogenic substrate. The limit of detection of the proposed method can reach as low as 13.73 μM in aqueous solution, which is lower than the maximum allowable concentration (79 μM) stipulated in the World Health Organization drinking water regulation. More importantly, this method is highly specific toward F^- over other types of anions commonly found in environmental water, making it capable of analyzing sewage samples with very complex matrices. Finally, the nanoprobe is embedded into a test strip by electrostatic spinning to enable the rapid, visual, and on-site detection of F^-.

Simpler Procedure and Improved Performance for Pathogenic Bacteria Analysis with a Paper-Based Ratiometric Fluorescent Sensor Array

Bacterial infections are the leading cause of morbidity and mortality in the world, particularly due to a delay in treatment and misidentification of the bacterial species causing the infection. Therefore, rapid and accurate identification of these pathogens has been of prime importance. The conventional diagnostic techniques include microbiological, biochemical, and genetic analyses, which are time-consuming, require large sample volumes, expensive equipment, reagents, and trained personnel. In response, we have now developed a paper-based ratiometric fluorescent sensor array. Environment-sensitive fluorescent dyes (3-hydroxyflavone derivatives) pre-adsorbed on paper microzone plates fabricated using photolithography, upon interaction with bacterial cell envelopes, generate unique fluorescence response patterns. The stability and reproducibility of the sensor array response were thoroughly investigated, and the analysis procedure was refined for optimal performance. Using neural networks for response pattern analysis, the sensor was able to identify 16 bacterial species and recognize their Gram status with an accuracy rate greater than 90%. The paper-based sensor was stable for up to 6 months after fabrication and required 30 times lower dye and sample volumes as compared to the analogous solution-based sensor. Therefore, this approach opens avenues to a state-of-the-art diagnostic tool that can be potentially translated into clinical applications in low-resource environments.

The recent development of nanozymes for food quality and safety detection

As potential mimics of natural enzymes, nanozymes overcome many disadvantages of natural enzymes such as complex preparation and purification process, high price, poor stability and low recycling efficiency. Combined with...

Ultrathin Ruthenium Nanosheets with Crystallinity-Modulated Peroxidase-like Activity for Protein Discrimination

Noble-metal-based nanozymes have attracted great interest as enzyme mimics because of their unique properties. To modulate the performance and meet the requirements of practical biosensing applications, phase engineering is promising for the design of novel noble-metal-based nanomaterials. Herein, a simple salt-assist strategy was employed for the synthesis of Ru nanosheets (NSs) with the controlled crystalline degree. The crystalline degree plays a significant role in tuning peroxidase-like activity by optimizing the affinity toward the catalytic substrate. Furthermore, the inhibition effect of mercapto molecules on the peroxidase-like activity of Ru NSs was investigated. As a proof-of-concept, the Ru NSs-based colorimetric sensing arrays were developed to distinguish mercapto molecules, and five model molecules were well classified according to the different inhibition effects. Given the complexity of practical conditions, the sensing array was further applied to discriminate proteins possessing rich mercapto groups. This work not only provides an effective strategy for the design of highly active nanozymes but also achieves promising sensing arrays for practical needs.

A peroxidase-like activity-based colorimetric sensor array of noble metal nanozymes to discriminate heavy metal ions

Heavy metal ions (HMIs), including Cu²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺ from the environment pose a threat to human beings and can cause a series of life-threatening diseases. Therefore, colorimetric sensors with convenience and flexibility for HMI discrimination are still required. To provide a solution, a peroxidase-like activity-based colorimetric sensor array of citrate-capped noble metal nanozymes (osmium, platinum, and gold) has been fabricated. Some studies reported that some HMIs could interact with the noble metal nanozymes leading to a change in their peroxidase-like activity. This phenomenon was confirmed in our work. Based on this principle, different concentrations of HMIs (Cu²⁺, Ag⁺, Cd²⁺, Hg²⁺, and Pb²⁺) were discriminated. Moreover, their practical application has been tested by discriminating HMIs in tap water and SiYu lake water. What is more, as an example of the validity of our method to quantify HMIs at nanomolar concentrations, the LOD of Hg²⁺ was presented. To sum up, our study not only demonstrates the differentiation ability of this nanozyme sensor array but also gives hints for using nanozyme sensor arrays for further applications.

Nanozyme sensor array based on manganese dioxide for the distinction between multiple amyloid β peptides and their dynamic aggregation process

The determination of the amyloid β (Aβ) peptide and its aggregation intermediates helps to understand the pathological mechanism of Alzheimer's disease (AD) caused by toxic amyloid fragments. Because of the transient and heterogeneous properties of Aβ aggregates, it is very difficult to dynamically detect Aβ and its aggregation intermediates. Herein, we successfully constructed a two-dimensional manganese dioxide (MnO₂) nanozyme sensor array by modulating the peroxidase-mimicking activity using various Aβ species and accurately distinguished among six types of Aβ within 1 h through linear discriminant analysis (LDA), with a dynamic detection range of 0.01-500 nmol/L and a detection limit of 0.44 pmol/L. Subsequently, 30 unknown blind samples were used to verify the practicability of the sensor array, and all unknown samples were identified with 100% accuracy. It is worth noting that the sensor array successfully distinguished healthy individuals from AD patients using clinical blood samples. This study provides a convenient and reliable nanozyme biosensing system for detecting Aβ species and their related aggregation processes.