Ultrafast Mapping of Subcellular Domains via Nanopipette-Based Electroosmotically Modulated Delivery into a Single Living Cell

Multilayer track-etched membrane-based electroosmotic pump for drug delivery

Herein, we report an electroosmotic pump (EOP) based on a multilayer track-etched polycarbonate (PC) membrane. A remarkable increase of maximum backpressure (198.2-2400 mmH2 O) of a fundamental pump unit was obtained at 0.8 mA, when the number of PC membranes was increased from 1 to 10. Meanwhile, the corresponding flow rate was increased from 80.3 to 111.7 µL/min. Furthermore, multiple pump units were assembled in series to obtain a multistage EOP. For a three-stage EOP (EOP-3), the operating voltage and power can be decreased significantly by 52%-72% under different driving currents, with a minimum power of 26.7 µW. Thus, EOP-3 can run stably over 35 h at a pulse current of 0.1 mA without the generation of gas bubbles. The pump was further integrated into a miniature device, which was successfully used to decrease the blood glucose level of diabetic rats by subcutaneous delivery of fast-acting insulin. This work brings a facile and efficient strategy to enhance the backpressure and lower the operating voltage and power of EOPs, which may find promising applications in drug delivery.

High-Precision Single-Cell microRNA Therapy by a Functional Nanopipette with Sensitive Photoelectrochemical Feedback

This work proposes the concept of single-cell microRNA (miR) therapy and proof-of-concept by engineering a nanopipette for high-precision miR-21-targeted therapy in a single HeLa cell with sensitive photoelectrochemical (PEC) feedback. Targeting the representative oncogenic miR-21, the as-functionalized nanopipette permits direct intracellular drug administration with precisely controllable dosages, and the corresponding therapeutic effects can be sensitively transduced by a PEC sensing interface that selectively responds to the indicator level of cytosolic caspase-3. The experimental results reveal that injection of ca. 4.4 × 10-20  mol miR-21 inhibitor, i.e., 26488 copies, can cause the obvious therapeutic action in the targeted cell. This work features a solution to obtain the accurate knowledge of how a certain miR-drug with specific dosages treats the cells and thus provides an insight into futuristic high-precision clinical miR therapy using personalized medicine, provided that the prerequisite single-cell experiments are courses of personalized customization.

Microfluidic Aqueous Two-Phase Focusing of Chemical Species for In Situ Subcellular Stimulation

Confinement of chemical species in a controllable micrometer-level (several to a dozen micrometers) space in an aqueous environment is essential for precisely manipulating chemical events in subcellular regions. However, rapid diffusion and hard-to-control micrometer-level fluids make it a tough challenge. Here, a versatile open microfluidic method based on an aqueous two-phase system (ATPS) is developed to restrict species inside an open space with micron-level width. Unequal standard chemical potentials of the chemical species in two phases and space-time correspondence in the microfluidic system prevent outward diffusion across the phase interface, retaining the target species inside its preferred phase flow and creating a sharp boundary with a dramatic concentration change. Then, the chemical flow (the preferred phase with target chemical species) is precisely manipulated by a microfluidic probe, which can be compressed to a micron-level width and aimed at an arbitrary position of the sample. As a demonstration of the feasibility and versatility of the strategy, chemical flow is successfully applied to subcellular regions of various kinds of living single cells. Subcellular regions are successfully labeled (cytomembrane and mitochondria) and damaged. Healing-regeneration behaviors of living single cells are triggered by subcellular damage and analyzed. The method is relatively general regarding the species of chemicals and biosamples, which could promote deeper cell research.

The Modification and Applications of Nanopipettes in Electrochemical Analysis

Nanopipette, which is fabricated by glasses and possesses a nanoscale pore in the tip, has been proven to be immensely useful in electrochemical analysis. Numerous nanopipette-based sensors have emerged with improved sensitivity, selectivity, ease of use, and miniaturization. In this minireview, we provide an overview of the recent developments of nanopipette-based electrochemical sensors based on different types of nanopipettes, including single-nanopipettes, self-referenced nanopipettes, dual-nanopipettes, and double-barrel nanopipettes. Several important modification materials for nanopipette functionalization are highlighted, such as conductive materials, macromolecular materials, and functional molecules. These materials can improve the sensing performance and targeting specificities of nanopipettes. We also discuss examples of related applications and the future development of nanopipette-based strategies.

Microfluidic Surgery in Single Cells and Multicellular Systems

Microscale surgery on single cells and small organisms has enabled major advances in fundamental biology and in engineering biological systems. Examples of applications range from wound healing and regeneration studies to the generation of hybridoma to produce monoclonal antibodies. Even today, these surgical operations are often performed manually, but they are labor intensive and lack reproducibility. Microfluidics has emerged as a powerful technology to control and manipulate cells and multicellular systems at the micro- and nanoscale with high precision. Here, we review the physical and chemical mechanisms of microscale surgery and the corresponding design principles, applications, and implementations in microfluidic systems. We consider four types of surgical operations: (1) sectioning, which splits a biological entity into multiple parts, (2) ablation, which destroys part of an entity, (3) biopsy, which extracts materials from within a living cell, and (4) fusion, which joins multiple entities into one. For each type of surgery, we summarize the motivating applications and the microfluidic devices developed. Throughout this review, we highlight existing challenges and opportunities. We hope that this review will inspire scientists and engineers to continue to explore and improve microfluidic surgical methods.

Development of multifunctional nanopipettes for controlled intracellular delivery and single-entity detection

The intracellular delivery of biomolecules and nanoscale materials to individual cells has gained remarkable attention in recent years owing to its wide applications in drug delivery, clinical diagnostics, bio-imaging and single-cell analysis. It remains a challenge to control and measure the delivered amount in one cell. In this work, we developed a multifunctional nanopipette - containing both a nanopore and nanoelectrode (pyrolytic carbon) at the apex - as a facile, minimally invasive and effective platform for both controllable single-cell intracellular delivery and single-entity counting. While controlled by a micromanipulator, the baseline changes of the nanopore ionic current (I) and nanoelectrode open circuit potential (V) help to guide the nanopipette tip insertion and positioning processes. The delivery from the nanopore barrel can be facilely controlled by the applied nanopore bias. To optimize the intracellular single-entity detection during delivery, we studied the effects of the nanopipette tip geometry and solution salt concentration in controlled experiments. We have successfully delivered gold nanoparticles and biomolecules into the cell, as confirmed by the increased scattering and fluorescence signals, respectively. The delivered entities have also been detected at the single-entity level using either one or both transient I and V signals. We found that the sensitivity of the single-entity electrochemical measurement was greatly affected by the local environment of the cell and varied between cell lines.

Nanopipette-Based Nanosensor for Label-Free Electrochemical Monitoring of Cell Membrane Rupture under H2O2 Treatment

H₂O₂ is an essential signaling molecule in living cells that can cause direct damage to lipids, proteins, and DNA, resulting in cell membrane rupture. However, current studies mostly focus on probe-based sensing of intracellular H₂O₂, and these methods usually require sophisticated probe synthesis and instruments. In particular, local H₂O₂ treatment induces cell membrane rupture, but the level of cell membrane destruction is unknown because the mechanical properties of the cell membrane are difficult to accurately determine. Therefore, highly sensitive and label-free methods are required to measure and reflect mechanical changes in the cell membrane. Here, using an ultrasmall quartz nanopipette with a tip diameter less than 90 nm as a nanosensor, label-free and noninvasive electrochemical single-cell measurement is achieved for real-time monitoring of cell membrane rupture under H₂O₂ treatment. By spatially controlling the nanopipette tip to precisely approach a specific location on the membrane of a single living cell, stable cyclic membrane oscillations are observed under a constant direct current voltage. Specifically, upon nanopipette advancement, the mechanical status of the cell membrane can be sensibly displayed by continuous current versus time traces. The electrical signals are collected and processed, ultimately revealing the mechanical properties of the cell membrane and the degree of cell apoptosis. This nanopipette-based nanosensor paves the way for developing a facile, label-free, and noninvasive strategy to assay the mechanical properties of the cell membrane during external stimulation at the single-cell level.

An Integrated Photoelectrochemical Nanotool for Intracellular Drug Delivery and Evaluation of Treatment Effect

With reduced background and high sensitivity, photoelectrochemistry (PEC) may be applied as an intracellular nanotool and open a new technological direction of single-cell study. Nevertheless, the present palette of single-cell tools lacks such a PEC-oriented solution. Here a dual-functional photocathodic single-cell nanotool capable of direct electroosmotic intracellular drug delivery and evaluation of oxidative stress is devised by engineering a target-specific organic molecule/NiO/Ni film at the tip of a nanopipette. Specifically, the organic molecule probe serves simultaneously as the biorecognition element and sensitizer to synergize with p-type NiO. Upon intracellular delivery at picoliter level, the oxidative stress effect will cause structural change of the organic probe, switching its optical absorption and altering the cathodic response. This work has revealed the potential of PEC single-cell nanotool and extended the boundary of current single-cell electroanalysis.

Emerging open microfluidics for cell manipulation

Cell manipulation is the foundation of biochemical studies, which demands user-friendly, multifunctional and precise tools. Based on flow confinement principles, open microfluidics can control the movement of microscale liquid in open space. Every position of the circuit is accessible to external instruments, making it possible to perform precise treatment and analysis of cells at arbitrary target positions especially at the single-cell/sub-cell level. Benefiting from its unique superiority, various manipulations including patterned cell culture, 3D tissue modelling, localized chemical stimulation, online cellular factor analysis, single cell sampling, partial cell treatment, and subcellular free radical attack can be easily realized. In this tutorial review, we summarize two basic ideas to design open microfluidics: open microfluidic networks and probes. The principles of mainstream open microfluidic methods are explained, and their recent important applications are introduced. Challenges and developing trends of open microfluidics are also discussed.

Nanoneedle-Based Materials for Intracellular Studies

Nanoneedles, defined as high aspect ratio structures with tip diameters of 5 to approximately 500 nm, are uniquely able to interface with the interior of living cells. Their nanoscale dimensions mean that they are able to penetrate the plasma membrane with minimal disruption of normal cellular functions, allowing researchers to probe the intracellular space and deliver or extract material from individual cells. In the last decade, a variety of strategies have been developed using nanoneedles, either singly or as arrays, to investigate the biology of cancer cells in vitro and in vivo. These include hollow nanoneedles for soluble probe delivery, nanocapillaries for single-cell biopsy, nano-AFM for direct physical measurements of cytosolic proteins, and a wide range of fluorescent and electrochemical nanosensors for analyte detection. Nanofabrication has improved to the point that nanobiosensors can detect individual vesicles inside the cytoplasm, delineate tumor margins based on intracellular enzyme activity, and measure changes in cell metabolism almost in real time. While most of these applications are currently in the proof-of-concept stage, nanoneedle technology is poised to offer cancer biologists a powerful new set of tools for probing cells with unprecedented spatial and temporal resolution.

Probing the Membrane Vibration of Single Living Cells by Using Nanopipettes

The vibration of a cell membrane plays a key role in the regulation of cell shape and the behavior of cells. However, most existing approaches for the measurement of cell vibration require either exogenous modification or sophisticated techniques, and the main challenge lies in developing methods that can monitor membrane vibration of living cells directly. Herein, a noninvasive strategy based on ultrasmall quartz nanopipettes is introduced. With a tip size of less than 100 nm, nanopipettes can be spatially controlled for precision targeting of a specific location on the membrane of single living cells. Surprisingly, by employing a constant voltage, stable cyclic oscillations are observed from the continuous current versus time traces. The time-domain current can be decomposed into two basic waves: the high-frequency one indicates the local membrane vibration driven by the electro-osmotic flow from the nanopipette, whereas the low-frequency one indicates the natural frequency of the whole cell. This provides a simple but reliable method to test local and global membrane vibration of single living cells simultaneously with little damage, which provides a tool for the quantification of drugs, disease, or mutations of the cell structure.

Lab on a tip: Applications of functional atomic force microscopy for the study of electrical properties in biology

Electrical properties, such as charge propagation, dielectrics, surface potentials, conductivity, and piezoelectricity, play crucial roles in biomolecules, biomembranes, cells, tissues, and other biological samples. However, characterizing these electrical properties in delicate biosamples is challenging. Atomic Force Microscopy (AFM), the so called "Lab on a Tip" is a powerful and multifunctional approach to quantitatively study the electrical properties of biological samples at the nanometer level. Herein, the principles, theories, and achievements of various modes of AFM in this area have been reviewed and summarized. STATEMENT OF SIGNIFICANCE: Electrical properties such as dielectric and piezoelectric forces, charge propagation behaviors play important structural and functional roles in biosystems from the single molecule level, to cells and tissues. Atomic force microscopy (AFM) has emerged as an ideal toolkit to study electrical property of biology. Herein, the basic principles of AFM are described. We then discuss the multiple modes of AFM to study the electrical properties of biological samples, including Electrostatic Force Microscopy (EFM), Kelvin Probe Force Microscopy (KPFM), Conductive Atomic Force Microscopy (CAFM), Piezoresponse Force Microscopy (PFM) and Scanning ElectroChemical Microscopy (SECM). Finally, the outlook, prospects, and challenges of the various AFM modes when studying the electrical behaviour of the samples are discussed.

Electrochemical Monitoring of Paclitaxel-Induced ROS Release from Mitochondria inside Single Cells

Mitochondria are believed to be the major source of intracellular reactive oxygen species (ROS). However, in situ, real-time and quantitative monitoring of ROS release from mitochondria that are present in their cytosolic environment remains a great challenge. In this work, a platinized SiC@C nanowire electrode is placed into a single cell for in situ detection of ROS signals from intracellular mitochondria, and antineoplastic agent (paclitaxel) induced ROS production is successfully recorded. Further investigations indicate that complex IV (cytochrome c oxidase, COX) is the principal site for ROS generation, and significantly more ROS are generated from mitochondria in cancer cells than that from normal cells. This work provides an effective approach to directly monitor intracellular mitochondria by nanowire electrodes, and consequently obtains important physiological evidence on antineoplastic agent-induced ROS generation, which will be of great benefit for better understanding of chemotherapy at subcellular levels.