Two D-π-A Schiff-Base-Functionalized Silica Gel Adsorbents for Preconcentration of Copper Ions in Foods and Water for Detection

Chelation therapy-inspired design of a water-stable fluorescent probe for the effectual monitoring of copper(II) ions in real water

This work introduces a thought-provoking design to develop a water-soluble chemical probe, sodium 4-hydroxy-3-((E)-((E)-((2-hydroxynaphthalen-1yl)methylene)hydrazono)methyl) benzenesulfonate (SW2) and its analytical characterization for the efficient detection and monitoring of Cu2+ ions in a matrix of s-, d-, and f-metal ions in pure water. The water-stable molecular probe, SW2, in the presence of Cu2+ salts in pure water exhibits a fluorescence turn-off characteristic with a high detection limit, 3.8 μM, and irresistibly holds 4-cycle reversibility in the presence of sulphide ions without any significant loss of its chemosensing efficiency. Spectroscopic and computational studies ensure 1 : 1 complexation between SW2 and Cu2+ ions, leading to the formation of SW2-Cu2+ chelate, thus inducing dynamic quenching of SW2 emission, which subsequently reverts on the addition of S2- ions in water. Additionally, the SW2-Cu2+ chelate was isolated in microcrystalline powder and the complexation was studied with mass spectrometry and EPR analysis. Computational analysis reveals the remarkable reduction in the S0-S1 energy level of the SW2-Cu2+ complex, which is attributed to the drastic quenching of the fluorescence intensity. Furthermore, SW2 was successfully applied to the detection of Cu2+ ions in tap and pond water. Interestingly, the probe is also effective for the determination of Cu2+ ions in the aqueous solution of a Cu-based fungicide (copper oxychloride), commercially available as Blitox in India, thus evaluating the effectiveness of SW2 in real sample analysis.

Synthesis, characterization and NLO properties of 1,4-phenylenediamine-based Schiff bases: a combined theoretical and experimental approach

In the current study, three novel 1,4-phenylenediamine-based chromophores (3a-3c) were synthesized and characterized and then their nonlinear optical (NLO) characteristics were explored theoretically. The characterization was done by spectroscopic analysis, i.e. FT-IR, UV-Visible, and NMR spectroscopy, and elemental analysis. Notably, these chromophores exhibited UV-Visible absorption within the range of 378.635-384.757 nm in acetonitrile solvent. Additionally, the FMO findings for 3a-3c revealed the narrowest band gap (4.129 eV) for 3c. The GRPs for these chromophores were derived from HOMO-LUMO energy values, which showed correspondence with FMO results by depicting a minimum hardness (2.065 eV) for 3c. Among these compounds, 3c displayed the highest nonlinear behavior with maximum μtot, βtot and γtot values of 4.79 D, 8.00 × 10-30 and 8.13 × 10-34 a.u., respectively. Our findings disclosed that the synthesized 1,4-phenylenediamine chromophores may be considered promising candidates for nonlinear optical materials, showing potential applications in the realm of optoelectronic devices.

The Latest Sensor Detection Methods for per- and Polyfluoroalkyl Substances

Per- and polyfluoroalkyl substances (PFASs) have emerged as a prominent environmental pollutant in recent years, primarily due to their tendency to accumulate and magnify in both the environment and living organisms. The entry of PFASs into the environment can have detrimental effects on human health. Hence, it is crucial to actively monitor and detect the presence of PFASs. The current standard detection method of PFAS is the combination of chromatography and mass spectrometry. However, this requires expensive instruments, extra sample pretreatment steps, complicated operation and long analysis time. As a result, new methods that do not rely on chromatography and mass spectrometry have been developed and applied. These alternative methods mainly include optical and electrochemical sensor methods, which offer great potential in terms of real-time field detection, instrument miniaturization, shorter analysis time, and reduced detection cost. This review provides a summary of recent advancements in PFAS detection sensors. We categorize and explain the principles and mechanisms of these sensors, and compare their limits of detection and sensitivity. Finally, we discuss the future challenges and improvements needed for PFAS sensors, such as field application, commercialization, and other related issues.

Environmentally friendly nanoflower Al2O3@carbon spheres as adsorbent for dispersive solid-phase microextraction of copper and lead in food and water samples

A fast and simple dispersive solid-phase microextraction method (d-SPμE) was described for the determination of copper and lead in food, water, and sediments using FAAS. Firstly, nanoflower Al2O3@carbon spheres composite (NF Al2O3@CSs) was synthesized and then characterized. The obtained NF Al2O3@CSs was used for the d-SPμE of copper and lead in aqueous solutions. The influence of important parameters like pH, contact time, eluent conditions, volume of sample, and competing ion effects on the d-SPμE efficiency of copper and lead was investigated. They were pH, 7; eluent, 2 mol L-1 HCl (2 mL); sample volume, 250 mL for copper and 150 mL for lead with recoveries ≥90%. The adsorption and elution of analytes on NF Al2O3@CSs were realized quickly without vortexing. The LODs of the d-SPμE for copper and lead were found to be 0.69 μg L-1 and 2.8 μg L-1, respectively, while its PF was 125 for copper and 75 for lead. The intra-day precision and inter-day repeatability (RSD%, n = 7) were 1.3% and 1.6% for Cu(II) and 2.3% and 3.2% for Pb(II), respectively. Finally, the accuracy of the d-SPμE was investigated by determination of the analytes in four certified reference materials (TMDA-53.3 Lake water, NW-TMDA-54.6 Lake water, NIST 1573a Tomato leaves, and NIST RM 8704 Buffalo River Sediment). The analyte recoveries together with analyses of dam water, river water, wastewater, sea water, sumac, tea, chocolate, and lentils were studied. The results indicate that recoveries ranged from 90 to 103% in water samples and 91 to 110% in food samples.

Fluorescence Properties of ZnOQDs-GO-g-C3N4 Nanocomposites

In this paper, the fluorescence properties of ZnOQD-GO-g-C₃N₄ composite materials (ZCGQDs) were studied. Firstly, the addition of a silane coupling agent (APTES) in the synthesis process was explored, and it was found that the addition of 0.04 g·mL^-1 APTES had the largest relative fluorescence intensity and the highest quenching efficiency. The selectivity of ZCGQDs for metal ions was also investigated, and it was found that ZCGQDs showed good selectivity for Cu²⁺. ZCGQDs were optimally mixed with Cu²⁺ for 15 min. ZCGQDs also had good anti-interference capability toward Cu²⁺. There was a linear relationship between the concentration of Cu²⁺ and the fluorescence intensity of ZCGQDs in the range of 1~100 µM. The regression equation was found to be F₀/F = 0.9687 + 0.12343C. The detection limit of Cu²⁺ was about 1.74 μM. The quenching mechanism was also analyzed.

Multilayer Graphene Oxide Supported ZIF-8 for Efficient Removal of Copper Ions

To address the performance deterioration of ZIF-8 for the adsorption of copper ions caused by powder volume pressure and particle aggregation, we employed multilayer graphene oxide (MGO) as a support to prepare composite adsorbents (MGO@ZIF-8) by using the in situ growth of ZIF-8 on MGO. Due to a good interfacial compatibility and affinity between ZIF-8 and graphene nanosheets, the MGO@ZIF-8 was successfully prepared. The optimal Cu²⁺ adsorption conditions of MGO@ZIF-8 were obtained through single factor experiments and orthogonal experiments. Surprisingly, the Cu²⁺ adsorption capacity was significantly improved by the integration of MGO and ZIF-8, and the maximum Cu²⁺ adsorption capacity of MGO@ZIF-8 reached 431.63 mg/g under the optimal adsorption conditions. Furthermore, the kinetic fitting and isotherm curve fitting confirmed that the adsorption law of Cu²⁺ by MGO@ZIF-8 was the pseudo-second-order kinetic model and the Langmuir isotherm model, which indicated that the process of Cu²⁺ adsorption was monolayer chemisorption. This work provides a new approach for designing and constructing ZIF-8 composites, and also offers an efficient means for the removal of heavy metals.

Selective adsorption of heavy metals from water by a hyper-branched magnetic composite material: Characterization, performance, and mechanism

The development of adsorbents to remove heavy metal ions from water with recyclable, high adsorption capacity, strong selectivity, safe, and economic performances has always been the focus and challenge of current research. A hyper-branched magnetic composite material (Fe₃O₄@SiO₂-S₄) was fabricated by a method combining "grafting,", "branching," and "modification,", and the structure was characterized by FTIR, XRD, SEM, TEM, SAED, VSM, TGA, and BET. In addition, the adsorption performance and mechanism for heavy metal ions in water were studied. The as-prepared composite material had excellent selective absorbability for Hg²⁺, Cd²⁺, and Ag⁺ in the presence of Fe³⁺, Fe²⁺, Cu²⁺, Mn²⁺, CO²⁺, Zn²⁺, and Ni²⁺, and when pH = 6, T = 30 °C, t = 4 h, it reached a saturated adsorption capacity of 2.42, 2.18, and 1.94 mmol/g to Hg²⁺, Cd²⁺, and Ag⁺, respectively. The adsorption isotherm was consistent with the Langmuir isotherm adsorption model, and the Dubinin Redushcke (D-R) model identified that the adsorption was chemical adsorption in nature. The adsorption kinetic followed the pseudo-second-order model and Boyd film diffusion models. The adsorption capacity of as-prepared material remained about 83% after five elutions. The adsorption mechanism and selective adsorption were revealed by FTIR, EDS, XPS, and DFT calculation. N atoms and O atoms of the active functional groups complexed with metal ions to form stable 2 heptachate chelates and 1 tridentate chelate to achieve the effect of adsorption; furthermore, the adsorption was mainly governed by N atoms of Schiff base groups. This work not only explored an innovative method for the construction of adsorbing materials but also provided a promising adsorbent to selectively remove heavy metal ions in water with potential application.

An α-naphtholphthalein-derived colorimetric fluorescent chemoprobe for the portable and visualized monitoring of Hg2+ by the hydrolysis mechanism

An ɑ-naphtholphthalein-derived colorimetric fluorescent chemoprobe was elaborately designed for the portable and visual monitoring of Hg2+ in environmental and biological samples.

A multi-responsive pyranone based Schiff base for the selective, sensitive and competent recognition of copper metal ions

Exploring a new multi-responsive pyranone chemosensor capable of sensing copper ions specifically and selectively through colorimetric, UV-Vis absorption and fluorescence methods is of great importance. In this piece of work, a novel pyranone based Schiff base ligand 4-Hydroxy-6-methyl-3-[1-(2-morpholin-4-yl-ethylimino)-ethyl]-pyran-2-one (DM) was synthesized by the condensation of dehydroacetic acid and 4-(2-aminoethyl) morpholine. The structural determination of ligand DM was executed using distinct spectral techniques i.e.,¹H NMR, ¹³C NMR, FT-IR and HR-MS techniques. The reported Schiff base DM showed an immediate colorimetric change from pale yellow to colorless accompanied by a strong change in the UV-Vis absorption band onto the addition of Cu (II) ions. This metal ligand chelation leads a decrease in ICT process. Also the decrease in fluorescence emission intensity of Schiff base DM with Cu (II) ions addition showed its turn-off behavior towards copper ions. Further absorption/ emission titration studies, Job's plot, HR-MS and ¹H NMR titration data designated 2:1 stoichiometric ratio between DM and Cu (II) ions respectively. Density functional theory studies were also performed to authenticate the binding mechanism theoretically. The sensitivity of Schiff base DM towards Cu (II) ions was applicable at every pH conditions and at the same time DM exhibited selectivity towards Cu (II) ions with a negligible interference of other metal ions. DM showed a detection limit of 7.7 nM towards copper ions via fluorescence emission studies. The best part about DM is that it has good stability but showed an instant chemical reversibility when titrated with EDTA solution.

A turn-on red-emitting fluorescent probe for determination of copper(II) ions in food samples and living zebrafish

Herein, we developed a turn-on red-emitting fluorescent probe for the sensitive and selective detection of copper ions (Cu²⁺) in food samples and living zebrafish. The probe employs a hemicyanine scaffold as the fluorophore and a 2-pyridinecarbonyl group as the recognition receptor and quenching moiety. The 2-pyridinecarbonyl moiety can be specifically cleaved by Cu²⁺ and results in an approximately 18-fold fluorescence enhancement of the probe, thereby providing a fluorescence turn-on assay for Cu²⁺. Additionally, the probe exhibited excellent selectivity, high sensitivity, a broad linear relationship (0.020 to 8.0 μM), and a low limit of detection (4.0 nM, S/N = 3) for Cu²⁺. Concomitantly, the probe exhibited satisfactory analytical performance when used with actual food samples. Moreover, the probe could be used for in situ determination of Cu²⁺ in both living plant tissues and in living zebrafish.

Mercury speciation based on mercury-stimulated peroxidase mimetic activity of gold nanoparticles

Mercury speciation is of significant importance in environmental and biological analysis because its toxicity and metabolic behavior in the human body differ among species. Nanomaterial-assisted optical sensors are widely used for mercury ion detection but rarely applied in mercury speciation analysis. In this work, we develop a novel colorimetric sensing strategy for mercury speciation based on mercury-stimulated peroxidase mimetic activity of gold nanoparticles with the assistance of different reductants. In the presence of a weak reductant, only inorganic mercury can be reduced to Hg⁰, whereas both inorganic mercury and organic mercury can be reduced to Hg⁰ in the presence of a strong reductant. Due to the high affinity between Hg and Au, Hg⁰ deposits on the AuNP surface in the form of a Au-Hg amalgam, leading to a remarkable enhancement of peroxidase mimetic activity of gold nanoparticles. On the basis of this effect, inorganic mercury and total mercury can be detected by using 3,3',5,5'-tetramethylbenzidine (TMB) as the substrate. The limits of detection for inorganic mercury and total mercury are 1.9 and 0.9 nM within 5-100 nM, respectively. The selectivity of this sensing system is high due to the specificity of Au-Hg interaction. Its practical applications are further demonstrated by organic mercury analysis in a fish sample and mercury speciation in a human hair sample.

An ultrasensitive and selective fluorescent nanosensor based on porphyrinic metal–organic framework nanoparticles for Cu2+ detection

A fluorescent nanosensor based on ultrasmall MOF-525 NPs was proposed for the monitoring of Cu²⁺ in aqueous solution and living cells.