Off-Resonance Photoacoustic Spectroscopy Technique for Multi-Gas Sensing in Biogas Plants

Near-infrared sensitive differential Helmholtz-based hydrogen sulfide photoacoustic sensors

A near-infrared (NIR) sub-ppm level photoacoustic sensor for hydrogen sulfide (H₂S) using a differential Helmholtz resonator (DHR) as the photoacoustic cell (PAC) was presented. The core detection system was composed of a NIR diode laser with a center wavelength of 1578.13 nm, an Erbium-doped optical fiber amplifier (EDFA) with an output power of ∼120 mW, and a DHR. Finite element simulation software was used to analyze the influence of the DHR parameters on the resonant frequency and acoustic pressure distribution of the system. Through simulation and comparison, the volume of the DHR was 1/16 that of the conventional H-type PAC for a similar resonant frequency. The performance of the photoacoustic sensor was evaluated after optimizing the DHR structure and modulation frequency. The experimental results showed that the sensor had an excellent linear response to the gas concentration and the minimum detection limit (MDL) for H₂S detection in differential mode can reach 460.8 ppb.

Smartphone-Integrated Photoacoustic Analytical Device for Point-of-Care Testing of Food Contaminant Azodicarbonamide

Azodicarbonamide (ADA) is widely used as a flour additive due to its oxidizing and bleaching properties, but it reacts with wet flour during heat processing and is easily decomposed into semicarbazide with genotoxicity and carcinogenicity. In order to improve the efficiency of food safety supervision and expand the scope of food safety control, it is of great significance to develop a facile method for point-of-care testing (POCT) of ADA. Herein, a field-portable and universal smartphone-based photoacoustic (PA) integration device is constructed for quantitative POCT of ADA in flour. The recognition probe Prussian blue with favorable stability is loaded on a flexible substrate for fabricating a portable test strip. In the presence of target ADA, the PA signal changes driven by a modulated 808 nm laser beam can be conveniently collected through the recording application (Audio Lab) of the smartphone. By combining the economic test strip and portable PA device with smartphone readout, it not only greatly simplifies the operation steps but also dramatically reduces the size and cost of the instrument. There is a favorable linear relationship between the PA signal and ADA concentration in the range of 10-200 μmol L^-1 (R² = 0.9928), and a detection limit of 5 μmol L^-1 obtained is much lower than the maximum allowable ADA level in the extract of flour (388 μmol L^-1). The present miniature PA device with strong POCT ability holds enormous public health significance and economic value in the field of food safety, especially in resource-limited settings.

Advances in mid-infrared spectroscopy enabled by supercontinuum laser sources

Supercontinuum sources are all-fiber pulsed laser-driven systems that provide high power spectral densities within ultra-broadband spectral ranges. The tailored process of generating broadband, bright, and spectrally flat supercontinua-through a complex interplay of linear and non-linear processes-has been recently pushed further towards longer wavelengths and has evolved enough to enter the field of mid-infrared (mid-IR) spectroscopy. In this work, we review the current state and perspectives of this technology that offers laser-like emission properties and instantaneous broadband spectral coverage comparable to thermal emitters. We aim to go beyond a literature review. Thus, we first discuss the basic principles of supercontinuum sources and then provide an experimental part focusing on the quantification and analysis of intrinsic emission properties such as typical power spectral densities, brightness levels, spectral stability, and beam quality (to the best of the authors' knowledge, the M² factor for a mid-IR supercontinuum source is characterized for the first time). On this basis, we identify key competitive advantages of these alternative emitters for mid-IR spectroscopy over state-of-the-art technologies such as thermal sources or quantum cascade lasers. The specific features of supercontinuum radiation open up prospects of improving well-established techniques in mid-IR spectroscopy and trigger developments of novel analytical methods and instrumentation. The review concludes with a structured summary of recent advances and applications in various routine mid-IR spectroscopy scenarios that have benefited from the use of supercontinuum sources.

Advances in Mid-Infrared Spectroscopy-Based Sensing Techniques for Exhaled Breath Diagnostics

Human exhaled breath consists of more than 3000 volatile organic compounds, many of which are relevant biomarkers for various diseases. Although gas chromatography has been the gold standard for volatile organic compound (VOC) detection in exhaled breath, recent developments in mid-infrared (MIR) laser spectroscopy have led to the promise of compact point-of-care (POC) optical instruments enabling even single breath diagnostics. In this review, we discuss the evolution of MIR sensing technologies with a special focus on photoacoustic spectroscopy, and its application in exhaled breath biomarker detection. While mid-infrared point-of-care instrumentation promises high sensitivity and inherent molecular selectivity, the lack of standardization of the various techniques has to be overcome for translating these techniques into more widespread real-time clinical use.

A portable photoacoustic device for facile and sensitive detection of serum alkaline phosphatase activity

It is still a high challenge to develop a simple, sensitive and portable approach for bioassay in strong scattering medium. Herein, a photoacoustic (PA) device is developed for the detection of alkaline phosphatase (ALP) in serum with silver nanoparticles (AgNPs) as signal probe, without any requirements for expensive equipment, professional operation and pre-processing of real samples. ALP as an important disease marker could catalyze the breakdown of sodium L-ascorbyl-2-phosphate (AAP) into ascorbic acid (AA), thereby reducing Ag⁺ to AgNPs. AgNPs could generate strong PA signal under the irradiation of modulated 638-nm laser due to their localized plasmon resonance, and detected by the self-made portable PA device. Under the optimized experimental conditions, the present PA device exhibits excellent photostability and reproducibility with the relative standard deviation (RSD) of 2.2% at the concentration of 25 U L^-1 ALP. Linear calibration graph is obtained within 5-70 U L^-1 for ALP, along with a detection limit of 1.1 U L^-1. This portable PA device is applied to detect ALP in serum samples, providing satisfactory spiking recoveries and competitive analytical performances with the current techniques. The PA-based analytical strategy obviously opens up a new avenue to the detection of disease-correlated biomarker in practice.