Precise DNA Concentration Measurements with Nanopores by Controlled Counting

Recent advances of small molecule detection in nanopore sensing

Due to its advantages of label-free and highly sensitive, the resistive pulse sensing with a nanopore has recently become even more potent for the discrimination of analytes in single molecule level. Generally, a transient interruption of ion current originated from the captured molecule passing through a nanopore will provide the rich information on the structure, charge and translocation dynamics of the analytes. Therefore, nanopore sensors have been widely used in the fields of DNA sequencing, protein recognition, and the portable detection of varied macromolecules and particles. However, the conventional nanopore devices are still lack of sufficient selectivity and sensitivity to distinguish more metabolic molecules involving ATP, glucose, amino acids and small molecular drugs because it is hard to receive a large number of identifiable signals with the fabricated pores comparable in size to small molecules for nanopore sensing. For all this, a series of innovative strategies developed in the past decades have been summarized in this review, including host-guest recognition, engineering alteration of protein channel, the introduction of nucleic acid aptamers and various delivery carriers integrating signal amplification sections based on the biological and solid nanopore platforms, to achieve the high resolution for the small molecules sensing in micro-nano environment. These works have greatly enhanced the powerful sensing capabilities and extended the potential application of nanopore sensors.

Identifying Viral Vector Characteristics by Nanopore Sensing

Using viral vectors as gene delivery vehicles for gene therapy necessitates their quality control. Here, we report on nanopore sensing for nondestructively inspecting genomes inside the nanoscale cargoes at the single-molecule level. Using ionic current measurements, we motion-tracked the adeno-associated virus (AAV) vectors as they translocated through a solid-state nanopore. Considering the varying contributions of the electrophoretic forces from the negatively charged internal polynucleotides of different lengths, the nanocargoes carrying longer DNA moved more slowly in the nanochannel. Moreover, ion blockage characteristics revealed their larger volume by up to approximately 3600 nm3 in proportion to the length of single-stranded DNA packaged inside, thereby allowing electrical discriminations of AAV vectors by the gene-derived physical features. The present findings can be a promising tool for the enhanced quality control of AAV products by enabling the screening of empty and intermediate vectors at the single-particle level.

High Fidelity Machine-Learning-Assisted False Positive Discrimination in Loop-Mediated Isothermal Amplification Using Nanopore-Based Sizing and Counting

Loop-mediated isothermal amplification (LAMP) is a rapid, sensitive, and cost-effective method for developing point-of-care nucleic acid testing due to its isothermal nature. Yet, LAMP can suffer from the issue of false positives, which can compromise the specificity of the results. LAMP false positives typically arise due to contamination, nonspecific amplification, and nonspecific signal reporting (intercalating dyes, colorimetric, turbidity, etc.). While dye-labeled primers or probes have been introduced for multiplexed detection and enhanced specificity in LAMP assays, they carry the risk of reaction inhibition. This inhibition can result from the labeled primers with fluorophores or quenchers and probes that do not fully dissociate during reaction. This work demonstrated a nanopore-based system for probe-free LAMP readouts by employing amplicon sizing and counting, analogous to an electronic version of gel electrophoresis. We first developed a model to explore LAMP kinetics and verified distinct patterns between true and false positives via gel electrophoresis. Subsequently, we implemented nanopore sized counting and calibrated the event charge deficit (ECD) values and frequencies to ensure a fair analysis of amplicon profiles. This sized counting method, integrated with machine learning, achieved 91.67% accuracy for false positive discrimination, enhancing LAMP's reliability for nucleic acid detection.

Simultaneous Multipass Resistive-Pulse Sensing and Fluorescence Imaging of Liposomes

Simultaneous multipass resistive-pulse sensing and fluorescence imaging have been used to correlate the size and fluorescence intensity of individual E. coli lipid liposomes composed of E. coli polar lipid extracts labeled with membrane-bound 3,3-dioctadecyloxacarbocyanine (DiO) fluorescent molecules. Here, a nanopipet serves as a waveguide to direct excitation light to the resistive-pulse sensing zone at the end of the nanopipet tip. Individual DiO-labeled liposomes (>50 nm radius) were multipassed back and forth through the orifices of glass nanopipets' 110-150 nm radius via potential switching to obtain subnanometer sizing precision, while recording the fluorescence intensity of the membrane-bound DiO molecules. Fluorescence was measured as a function of liposome radius and found to be approximately proportional to the total membrane surface area. The observed relationship between liposome size and fluorescence intensity suggests that multivesicle liposomes emit greater fluorescence compared to unilamellar liposomes, consistent with all lipid membranes of the multivesicle liposomes containing DiO. Fluorescent and nonfluorescent liposomes are readily distinguished from each other in the same solution using simultaneous multipass resistive-pulse sensing and fluorescence imaging. A fluorescence "dead zone" of ∼1 μm thickness just outside of the nanopipet orifice was observed during resistive-pulse sensing, resulting in "on/off" fluorescent behavior during liposome multipassing.

Sensing the DNA-mismatch tolerance of catalytically inactive Cas9 via barcoded DNA nanostructures in solid-state nanopores

Single-molecule quantification of the strength and sequence specificity of interactions between proteins and nucleic acids would facilitate the probing of protein-DNA binding. Here we show that binding events between the catalytically inactive Cas9 ribonucleoprotein and any pre-defined short sequence of double-stranded DNA can be identified by sensing changes in ionic current as suitably designed barcoded linear DNA nanostructures with Cas9-binding double-stranded DNA overhangs translocate through solid-state nanopores. We designed barcoded DNA nanostructures to study the relationships between DNA sequence and the DNA-binding specificity, DNA-binding efficiency and DNA-mismatch tolerance of Cas9 at the single-nucleotide level. Nanopore-based sensing of DNA-barcoded nanostructures may help to improve the design of efficient and specific ribonucleoproteins for biomedical applications, and could be developed into sensitive protein-sensing assays.

Over One Million DNA and Protein Events Through Ultra-Stable Chemically-Tuned Solid-State Nanopores

Stability, long lifetime, resilience against clogging, low noise, and low cost are five critical cornerstones of solid-state nanopore technology. Here, a fabrication protocol is described wherein >1 million events are obtained from a single solid-state nanopore with both DNA and protein at the highest available lowpass filter (LPF, 100 kHz) of the Axopatch 200B-the highest event count mentioned in literature. Moreover, a total of ≈8.1 million events are reported in this work encompassing the two analyte classes. With the 100 kHz LPF, the temporally attenuated population is negligible while with the more ubiquitous 10 kHz, ≈91% of the events are attenuated. With DNA experiments, the pores are operational for hours (typically >7 h) while the average pore growth is merely ≈0.16 ± 0.1 nm h-1 . The current noise is exceptionally stable with traces typically showing <10 pA h-1 increase in noise. Furthermore, a real-time method to clean and revive pores clogged with analyte with the added benefit of minimal pore growth during cleaning (< 5% of the original diameter) is showcased. The enormity of the data collected herein presents a significant advancement to solid-state pore performance and will be useful for future ventures such as machine learning where large amounts of pristine data are a prerequisite.

Mechanistic Study of the Conductance and Enhanced Single-Molecule Detection in a Polymer-Electrolyte Nanopore

Solid-state nanopores have been widely employed in the detection of biomolecules, but low signal-to-noise ratios still represent a major obstacle in the discrimination of nucleic acid and protein sequences substantially smaller than the nanopore diameter. The addition of 50% poly(ethylene) glycol (PEG) to the external solution is a simple way to enhance the detection of such biomolecules. Here, we demonstrate with finite-element modeling and experiments that the addition of PEG to the external solution introduces a strong imbalance in the transport properties of cations and anions, drastically affecting the current response of the nanopore. We further show that the strong asymmetric current response is due to a polarity-dependent ion distribution and transport at the nanopipette tip region, leading to either ion depletion or enrichment for few tens of nanometers across its aperture. We provide evidence that a combination of the decreased/increased diffusion coefficients of cations/anions in the bath outside the nanopore and the interaction between a translocating molecule and the nanopore-bath interface is responsible for the increase in the translocation signals. We expect this new mechanism to contribute to further developments in nanopore sensing by suggesting that tuning the diffusion coefficients of ions could enhance the sensitivity of the system.

Nanopore Detection Using Supercharged Polypeptide Molecular Carriers

The analysis at the single-molecule level of proteins and their interactions can provide critical information for understanding biological processes and diseases, particularly for proteins present in biological samples with low copy numbers. Nanopore sensing is an analytical technique that allows label-free detection of single proteins in solution and is ideally suited to applications, such as studying protein-protein interactions, biomarker screening, drug discovery, and even protein sequencing. However, given the current spatiotemporal limitations in protein nanopore sensing, challenges remain in controlling protein translocation through a nanopore and relating protein structures and functions with nanopore readouts. Here, we demonstrate that supercharged unstructured polypeptides (SUPs) can be genetically fused with proteins of interest and used as molecular carriers to facilitate nanopore detection of proteins. We show that cationic SUPs can substantially slow down the translocation of target proteins due to their electrostatic interactions with the nanopore surface. This approach enables the differentiation of individual proteins with different sizes and shapes via characteristic subpeaks in the nanopore current, thus facilitating a viable route to use polypeptide molecular carriers to control molecular transport and as a potential system to study protein-protein interactions at the single-molecule level.

Large-scale production of polyimide micropore-based flow cells for detecting nano-sized particles in fluids

In diagnostic and sequencing applications, solid-state nanopores hold significant promise as a single-molecule sensing platform. The fabrication of precisely sized pores has traditionally been challenging, laborious, expensive, and inefficient, which has limited its applications until recently. To overcome this problem, this paper proposes a novel, reliable, cost-effective, portable, mass-productive, robust, and ease-of-use micropore flow cell that works based on the resistive pulse sensor (RPS) technique in order to distinguish the different sizes of c nanoparticles. RPS is a robust and informative technique that can provide valuable details of the size, shape, charge, and individual particle concentrations in the media. By femtosecond laser drilling of a polyimide substrate as an alternate material, translocation of 100, 300, and 350 nm polystyrene nanoparticles in PBS buffer was distinguished by 0.1, 1, and 2 nA current blockade levels, respectively. This is the first time a micropore has been opened in a polyimide membrane using a femtosecond laser in a single step. The experimental and theoretical investigation, scanning electron microscopy and focused ion beam spectroscopy were performed to comprehensively explain the micropore's performance. We showed that our innovative micropore-based flow cell could distinguish nano-sized particles in fluids, and it can be used in large-scale production because of its simplicity and cost-effectiveness.

Probing RNA Conformations Using a Polymer-Electrolyte Solid-State Nanopore

Nanopore systems have emerged as a leading platform for the analysis of biomolecular complexes with single-molecule resolution. The conformation of biomolecules, such as RNA, is highly dependent on the electrolyte composition, but solid-state nanopore systems often require high salt concentration to operate, precluding analysis of macromolecular conformations under physiologically relevant conditions. Here, we report the implementation of a polymer-electrolyte solid-state nanopore system based on alkali metal halide salts dissolved in 50% w/v poly(ethylene) glycol (PEG) to augment the performance of our system. We show that polymer-electrolyte bath governs the translocation dynamics of the analyte which correlates with the physical properties of the salt used in the bath. This allowed us to identify CsBr as the optimal salt to complement PEG to generate the largest signal enhancement. Harnessing the effects of the polymer-electrolyte, we probed the conformations of the Chikungunya virus (CHIKV) RNA genome fragments under physiologically relevant conditions. Our system was able to fingerprint CHIKV RNA fragments ranging from ∼300 to ∼2000 nt length and subsequently distinguish conformations between the co-transcriptionally folded and the natively refolded ∼2000 nt CHIKV RNA. We envision that the polymer-electrolyte solid-state nanopore system will further enable structural and conformational analyses of individual biomolecules under physiologically relevant conditions.

High-Voltage Biomolecular Sensing Using a Bacteriophage Portal Protein Covalently Immobilized within a Solid-State Nanopore

The application of nanopores as label-free, single-molecule biosensors for electrical or optical probing of structural features in biomolecules has been widely explored. While biological nanopores (membrane proteins and bacteriophage portal proteins) and solid-state nanopores (thin films and two-dimensional materials) have been extensively employed, the third class of nanopores known as hybrid nanopores, where an artificial membrane substitutes the organic support membrane of proteins, has been only sparsely studied due to challenges in implementation. G20c portal protein contains a natural DNA pore that is used by viruses for filling their capsid with viral genomic DNA. We have previously developed a lipid-free hybrid nanopore by "corking" the G20c portal protein into a SiN_x nanopore. Herein, we demonstrate that through chemical functionalization of the synthetic nanopore, covalent linkage between the solid-state pore and the G20c portal protein considerably improves the hybrid pore stability, lifetime, and voltage resilience. Moreover, we demonstrate electric-field-driven and motor protein-mediated transport of DNA molecules through this hybrid nanopore. Our integrated protein/solid-state device can serve as a robust and durable framework for sensing and sequencing at high voltages, potentially providing higher resolution, higher signal-to-noise ratio, and higher throughput compared to the more conventional membrane-embedded protein platforms.

A Critical Review on the Sensing, Control, and Manipulation of Single Molecules on Optofluidic Devices

Single-molecule techniques have shifted the paradigm of biological measurements from ensemble measurements to probing individual molecules and propelled a rapid revolution in related fields. Compared to ensemble measurements of biomolecules, single-molecule techniques provide a breadth of information with a high spatial and temporal resolution at the molecular level. Usually, optical and electrical methods are two commonly employed methods for probing single molecules, and some platforms even offer the integration of these two methods such as optofluidics. The recent spark in technological advancement and the tremendous leap in fabrication techniques, microfluidics, and integrated optofluidics are paving the way toward low cost, chip-scale, portable, and point-of-care diagnostic and single-molecule analysis tools. This review provides the fundamentals and overview of commonly employed single-molecule methods including optical methods, electrical methods, force-based methods, combinatorial integrated methods, etc. In most single-molecule experiments, the ability to manipulate and exercise precise control over individual molecules plays a vital role, which sometimes defines the capabilities and limits of the operation. This review discusses different manipulation techniques including sorting and trapping individual particles. An insight into the control of single molecules is provided that mainly discusses the recent development of electrical control over single molecules. Overall, this review is designed to provide the fundamentals and recent advancements in different single-molecule techniques and their applications, with a special focus on the detection, manipulation, and control of single molecules on chip-scale devices.

On the origins of conductive pulse sensing inside a nanopore

Nanopore sensing is nearly synonymous with resistive pulse sensing due to the characteristic occlusion of ions during pore occupancy, particularly at high salt concentrations. Contrarily, conductive pulses are observed under low salt conditions wherein electroosmotic flow is significant. Most literature reports counterions as the dominant mechanism of conductive events (a molecule-centric theory). However, the counterion theory does not fit well with conductive events occurring via net neutral-charged protein translocation, prompting further investigation into translocation mechanics. Herein, we demonstrate theory and experiments underpinning the translocation mechanism (i.e., electroosmosis or electrophoresis), pulse direction (i.e., conductive or resistive) and shape (e.g., monophasic or biphasic) through fine control of chemical, physical, and electronic parameters. Results from these studies predict strong electroosmosis plays a role in driving DNA events and generating conductive events due to polarization effects (i.e., a pore-centric theory).

Conductive events during nanopore sensing, are seen typically under low salt conditions and widely thought to arise from counterions brought into the pore via analyte. Here, authors show that an imbalance of ionic fluxes lead to conductive events.

The application of single molecule nanopore sensing for quantitative analysis

Nanopore-based sensors typically work by monitoring transient pulses in conductance via current-time traces as molecules translocate through the nanopore. The unique property of being able to monitor single molecules gives nanopore sensors the potential as quantitative sensors based on the counting of single molecules. This review provides an overview of the concepts and fabrication of nanopore sensors as well as nanopore sensing with a view toward using nanopore sensors for quantitative analysis. We first introduce the classification of nanopores and highlight their applications in molecular identification with some pioneering studies. The review then shifts focus to recent strategies to extend nanopore sensors to devices that can rapidly and accurately quantify the amount of an analyte of interest. Finally, future prospects are provided and briefly discussed. The aim of this review is to aid in understanding recent advances, challenges, and prospects for nanopore sensors for quantitative analysis.

Lifetime of glass nanopores in a PDMS chip for single-molecule sensing

Nanopore sensing is an emerging technology that has many biosensing applications ranging from DNA sequencing using biological pores to biomolecular analysis using solid-state pores. Solid-state nanopores that are more stable are an attractive choice for biosensing applications. Still, biomolecule interactions with the nanopore surface reduce nanopore stability and increase usage costs. In this study, we investigated the biosensing capability for 102 quartz glass nanopores with a diameter of 11–18 nm that were fabricated using laser-assisted capillary pulling. Nanopores were assembled into multiple microfluidic chips that were repeatedly used for up to 19 weeks. We find that using vacuum storage combined with minimal washing steps improved the number of use cycles for nanopores. The single-molecule biosensing capability over repeated use cycles was demonstrated by quantitative analysis of a DNA carrier designed for detection of short single-stranded DNA oligonucleotides.

•

Maintaining low noise and linear current-voltage relation is crucial for biosensing

•

Multiple nanopores embedded in a chip can make more than 90 different measurements

•

Nanopores can be reused weekly over 19 weeks

•

Nanopore failure can be attributed to contaminant accumulation and dissolution

Optimizing the sensitivity and resolution of hyaluronan analysis with solid-state nanopores

Hyaluronan (HA) is an essential carbohydrate in vertebrates that is a potentially robust bioindicator due to its critical roles in diverse physiological functions in health and disease. The intricate size-dependent function that exists for HA and its low abundance in most biological fluids have highlighted the need for sensitive technologies to provide accurate and quantitative assessments of polysaccharide molecular weight and concentration. We have demonstrated that solid state (SS-) nanopore technology can be exploited for this purpose, given its molecular sensitivity and analytical capacity, but there remains a need to further understand the impacts of experimental variables on the SS-nanopore signal for optimal interpretation of results. Here, we use model quasi-monodisperse HA polymers to determine the dependence of HA signal characteristics on a range of SS-nanopore measurement conditions, including applied voltage, pore diameter, and ionic buffer asymmetry. Our results identify important factors for improving the signal-to-noise ratio, resolution, and sensitivity of HA analysis with SS-nanopores.

Screening for Group A Streptococcal Disease via Solid-State Nanopore Detection of PCR Amplicons

Single-molecule detection methods are becoming increasingly important for diagnostic applications. Practical early detection of disease requires sensitivity down to the level of single copies of the targeted biomarkers. Of the candidate technologies that can address this need, solid-state nanopores show great promise as digital sensors for single-molecule detection. Here, we present work detailing the use of solid-state nanopores as downstream sensors for a polymerase chain reaction (PCR)-based assay targeting group A streptococcus (strep A), which can be readily extended to detect any pathogen that can be identified with a short nucleic acid sequence. We demonstrate that with some simple modifications to the standard PCR reaction mixture, nanopores can be used to reliably identify strep A in clinical samples. We also discuss methodological best practices for both adapting PCR-based assays to solid-state nanopore readout and analytical approaches by which to decide on sample status.

Salt Gradient Control of Translocation Dynamics in a Solid-State Nanopore

Tuning capture rates and translocation time of analytes in solid-state nanopores are one of the major challenges for their use in detecting and analyzing individual nanoscale objects via ionic current measurements. Here, we report on the use of salt gradient for the fine control of capture-to-translocation dynamics in 300 nm sized SiN_x nanopores. We demonstrated a decrease up to a factor of 3 in the electrophoretic speed of nanoparticles at the pore exit along with an over 3-fold increase in particle detection efficiency by subjecting a 5-fold ion concentration difference across the dielectric membrane. The improvement in the sensor performance was elucidated to be a result of the salt-gradient-mediated electric field and electroosmotic flow asymmetry at nanochannel orifices. The present findings can be used to enhance nanopore sensing capability for detecting biomolecules such as amyloids and proteins.

Digital immunoassay for biomarker concentration quantification using solid-state nanopores

Single-molecule counting is the most accurate and precise method for determining the concentration of a biomarker in solution and is leading to the emergence of digital diagnostic platforms enabling precision medicine. In principle, solid-state nanopores—fully electronic sensors with single-molecule sensitivity—are well suited to the task. Here we present a digital immunoassay scheme capable of reliably quantifying the concentration of a target protein in complex biofluids that overcomes specificity, sensitivity, and consistency challenges associated with the use of solid-state nanopores for protein sensing. This is achieved by employing easily-identifiable DNA nanostructures as proxies for the presence (“1”) or absence (“0”) of the target protein captured via a magnetic bead-based sandwich immunoassay. As a proof-of-concept, we demonstrate quantification of the concentration of thyroid-stimulating hormone from human serum samples down to the high femtomolar range. Further optimization to the method will push sensitivity and dynamic range, allowing for development of precision diagnostic tools compatible with point-of-care format.

The concentration of a biomarker in solution can be determined by counting single molecules. Here the authors report a digital immunoassay scheme with solid-state nanopore readout to quantify a target protein and use this to measure thyroid-stimulating hormone from human serum.

Nanopore Data Analysis: Baseline Construction and Abrupt Change-Based Multilevel Fitting

Solid-state nanopore technology delivers single-molecule resolution information, and the quality of the deliverables hinges on the capability of the analysis platform to extract maximum possible events and fit them appropriately. In this work, we present an analysis platform with four baseline fitting methods adaptive to a wide range of nanopore traces (including those with a step or abrupt changes where pre-existing platforms fail) to maximize extractable events (2× improvement in some cases) and multilevel event fitting capability. The baseline fitting methods, in the increasing order of robustness and computational cost, include arithmetic mean, linear fit, Gaussian smoothing, and Gaussian smoothing and regressed mixing. The performance was tested with ultra-stable to vigorously fluctuating current profiles, and the event count increased with increasing fitting robustness prominently for vigorously fluctuating profiles. Turning points of events were clustered using the dbscan method, followed by segmentation into preliminary levels based on abrupt changes in the signal level, which were then iteratively refined to deduce the final levels of the event. Finally, we show the utility of clustering for multilevel DNA data analysis, followed by the assessment of protein translocation profiles.

Quantitative Measurements of Protein Volume and Concentration using Hydrogel-Backed Nanopores

Accurate identification and quantification of proteins in solution using nanopores is technically challenging in part because of the large fraction of missed translocation events due to short event times and limitations of conventional current amplifiers. Previously, we have shown that a nanopore interfaced with a poly(ethylene glycol)-dimethacrylate hydrogel with an average mesh size of 3.1 nm significantly enhances the protein residence time within the pore, reducing the number of missed events. We used hydrogel-backed nanopores to sense unlabeled proteins as small as 5.5 kDa in size and 10 fM in concentration. We show that the frequency of protein translocation events linearly scales with bulk concentration over a wide range of concentrations and that unknown protein concentrations can be determined from an interpolation of the frequency-concentration curve with less than 10% error. Further, we show an iterative method to determine a protein volume accurately from measurement data for proteins with a diameter comparable to a nanopore diameter. Our measurements and analysis also suggest several competing mechanisms for the detection enhancement enabled by the presence of the hydrogel.

Dielectric Coatings for Resistive Pulse Sensing Using Solid-State Pores

The present study reports on the systematic characterization of the effectiveness of dielectric coating to tailor capture-to-translocation dynamics of single particles in solid-state pores. We covered the surface of SiN_x membranes with SiO₂, HfO₂, Al₂O₃, TiO₂, or ZnO, which allowed us to change the ζ-potential at the pore wall, reflecting the isoelectric points of these coating materials. Resistive pulse measurements of negatively charged polystyrene beads elucidated more facile electrophoretic capture of the particles and slower translocation motions in the channel under more negative electric potential at the oxide surface. These findings provide a guide to engineer pore wall surface for optimizing the translocation dynamics for efficient sensing of particles and molecules.

An efficient kinetic Monte Carlo to study analyte capture by a nanopore: transients, boundary conditions and time-dependent fields

To better understand the capture process by a nanopore, we introduce an efficient Kinetic Monte Carlo (KMC) algorithm that can simulate long times and large system sizes by mapping the dynamic of a point-like particle in a 3D spherically symmetric system onto the 1D biased random walk. Our algorithm recovers the steady-state analytical solution and allows us to study time-dependent processes such as transients. Simulation results show that the steady-state depletion zone near pore is barely larger than the pore radius and narrows at higher field intensities; as a result, the time to reach steady-state is much smaller than the time required to empty a zone of the size of the capture radius λe. When the sample reservoir has a finite size, a second depletion region propagates inward from the outer wall, and the capture rate starts decreasing when it reaches the capture radius λe. We also note that the flatness of the electric field near the pore, which is often neglected, induces a traffic jam that can increase the transient time by several orders of magnitude. Finally, we propose a new proof-of-concept scheme to separate two analytes of the same mobility but different diffusion coefficients using time-varying fields.

Digital counting of nucleic acid targets using solid-state nanopores

Assays targeting biomarkers for the early diagnosis of disease demand a sensing platform with a high degree of specificity and sensitivity. In this work, we developed and characterized a solid-state nanopore-based sensing assay for the detection of short nucleic acid targets with readily customizable nanostructured DNA probe sets. We explored the electrical signatures of three DNA nanostructures to determine their performance as probe sets in a digital counting scheme to quantify the concentration of targets. With these probes, we demonstrate the specific, simultaneous detection of two different DNA targets in a 2-plex assay, and separately that of microRNA-155, a biomarker linked to various human cancers. In addition to specific target detection, our scheme demonstrated the ability to quantify at least six different microRNA concentrations. These results highlight the potential for solid-state nanopores as single-molecule counters for future digital diagnostic technologies.

Beyond nanopore sizing: improving solid-state single-molecule sensing performance, lifetime, and analyte scope for omics by targeting surface chemistry during fabrication

Solid-state nanopores (SSNs) are single-molecule resolution sensors with a growing footprint in real-time bio-polymer profiling-most prominently, but far from exclusively, DNA sequencing. SSNs accessibility has increased with the advent of controlled dielectric breakdown (CDB), but severe fundamental challenges remain: drifts in open-pore current and (irreversible) analyte sticking. These behaviors impede basic research and device development for commercial applications and can be dramatically exacerbated by the chemical complexity and physical property diversity of different analytes. We demonstrate a SSN fabrication approach attentive to nanopore surface chemistry during pore formation, and thus create nanopores in silicon nitride (SiN_x) capable of sensing a wide analyte scope-nucleic acid (double-stranded DNA), protein (holo-human serum transferrin) and glycan (maltodextrin). In contrast to SiN_x pores fabricated without this comprehensive approach, the pores are Ohmic in electrolyte, have extremely stable open-pore current during analyte translocation (>1 h) over a broad range of pore diameters ([Formula: see text]3- ∼30 nm) with spontaneous current correction (if current deviation occurs), and higher responsiveness (i.e. inter-event frequency) to negatively charged analytes (∼6.5 × in case of DNA). These pores were fabricated by modifying CDB with a chemical additive-sodium hypochlorite-that resulted in dramatically different nanopore surface chemistry including ∼3 orders of magnitude weaker K_a (acid dissociation constant of the surface chargeable head-groups) compared to CDB pores which is inextricably linked with significant improvements in nanopore performance with respect to CDB pores.

Sensing with Nanopores and Aptamers: A Way Forward

In the 90s, the development of a novel single molecule technique based on nanopore sensing emerged. Preliminary improvements were based on the molecular or biological engineering of protein nanopores along with the use of nanotechnologies developed in the context of microelectronics. Since the last decade, the convergence between those two worlds has allowed for biomimetic approaches. In this respect, the combination of nanopores with aptamers, single-stranded oligonucleotides specifically selected towards molecular or cellular targets from an in vitro method, gained a lot of interest with potential applications for the single molecule detection and recognition in various domains like health, environment or security. The recent developments performed by combining nanopores and aptamers are highlighted in this review and some perspectives are drawn.

Capture of rod-like molecules by a nanopore: Defining an "orientational capture radius"

Both the translational diffusion coefficient D and the electrophoretic mobility μ of a short rod-like molecule (such as dsDNA) that is being pulled toward a nanopore by an electric field should depend on its orientation. Since a charged rod-like molecule tends to orient in the presence of an inhomogeneous electric field, D and μ will change as the molecule approaches the nanopore, and this will impact the capture process. We present a simplified study of this problem using theoretical arguments and Langevin dynamics simulations. In particular, we introduce a new orientational capture radius, which we compare to the capture radius for the equivalent point-like particle, and we discuss the different physical regimes of orientation during capture and the impact of initial orientations on the capture time.