Rapid Amplification-Free Microarray-Based Ultrasensitive Detection of DNA

An integrated microfluidic platform for nucleic acid testing

This study presents a rapid and versatile low-cost sample-to-answer system for SARS-CoV-2 diagnostics. The system integrates the extraction and purification of nucleic acids, followed by amplification via either reverse transcription-quantitative polymerase chain reaction (RT-qPCR) or reverse transcription loop-mediated isothermal amplification (RT-LAMP). By meeting diverse diagnostic and reagent needs, the platform yields testing results that closely align with those of commercial RT-LAMP and RT‒qPCR systems. Notable advantages of our system include its speed and cost-effectiveness. The assay is completed within 28 min, including sample loading (5 min), ribonucleic acid (RNA) extraction (3 min), and RT-LAMP (20 min). The cost of each assay is ≈ $9.5, and this pricing is competitive against that of Food and Drug Administration (FDA)-approved commercial alternatives. Although some RNA loss during on-chip extraction is observed, the platform maintains a potential limit of detection lower than 297 copies. Portability makes the system particularly useful in environments where centralized laboratories are either unavailable or inconveniently located. Another key feature is the platform's versatility, allowing users to choose between RT‒qPCR or RT‒LAMP tests based on specific requirements.

Detection of Single Nucleotide Polymorphisms of Circulating Tumor DNA by Strand Displacement Amplification Coupled with Liquid Chromatography

The detection of multiple single nucleotide polymorphisms (SNPs) of circulating tumor DNA (ctDNA) is still a great challenge. In this study, we designed enzyme-assisted nucleic acid strand displacement amplification combined with high-performance liquid chromatography (HPLC) for the simultaneous detection of three ctDNA SNPs. First, the trace ctDNA could be hybridized to the specially designed template strand, which initiated the strand displacement nucleic acid amplification process under the synergistic action of DNA polymerase and restriction endonuclease. Then, the targets would be replaced with G-quadruplex fluorescent probes with different tail lengths. Finally, the HPLC-fluorescence assay enabled the separation and quantification of multiple signals. Notably, this method can simultaneously detect both the wild type (WT) and mutant type (MT) of multiple ctDNA SNPs. Within a linear range of 0.1 fM-0.1 nM, the detection limits of BRAF V600E-WT, EGFR T790M-WT, and KRAS 134A-WT and BRAF V600E-MT, EGFR T790M-MT, and KRAS 134A-MT were 29, 31, and 11 aM and 22, 29, and 33 aM, respectively. By using this method, the mutation rates of multiple ctDNA SNPs in blood samples from patients with lung or breast cancer can be obtained in a simple way, providing a convenient and highly sensitive analytical assay for the early screening and monitoring of lung cancer.

Ultrasensitive detection of genetic variation based on dual signal amplification assisted by isothermal amplification and cobalt oxyhydroxide nanosheets/quantum dots

PML/RARα fusion gene (P/R) is the characteristic signature genetic variation of acute promyelocytic leukemia (APL). Here, by integrating triple-stranded DNA hybridization-triggered strand displacement amplification (tri-HT SDA) and cobalt oxyhydroxide nanosheets/quantum dots (CoOOH/QD)-based amplification, we constructed a novel biosensor of easy-operating, time-saving and high sensitivity for detecting P/R to meet clinical needs. Owing to the specific recognition and efficient amplification of tri-HT SDA as well as impressive anti-interference and considerable amplification of CoOOH/QD, this biosensor demonstrated a wide dynamic range (10 fM to 10 nM) with a low limit of detection (5.50 fM) in P/R detection. Additionally, this biosensor could detect P/R spiked into human serum with good recoveries and relative standard deviation (RSD), thus potentially exhibiting ultrasensitive and specific nuclear acid sequence detection ability in clinical diagnosis owing to combing isothermal amplification and nanomaterials.

Nucleotide detection mechanism and comparison based on low-dimensional materials: A review

The recent pandemic has led to the fabrication of new nucleic acid sensors that can detect infinitesimal limits immediately and effectively. Therefore, various techniques have been demonstrated using low-dimensional materials that exhibit ultrahigh detection and accuracy. Numerous detection approaches have been reported, and new methods for impulse sensing are being explored. All ongoing research converges at one unique point, that is, an impetus: the enhanced limit of detection of sensors. There are several reviews on the detection of viruses and other proteins related to disease control point of care; however, to the best of our knowledge, none summarizes the various nucleotide sensors and describes their limits of detection and mechanisms. To understand the far-reaching impact of this discipline, we briefly discussed conventional and nanomaterial-based sensors, and then proposed the feature prospects of these devices. Two types of sensing mechanisms were further divided into their sub-branches: polymerase chain reaction and photospectrometric-based sensors. The nanomaterial-based sensor was further subdivided into optical and electrical sensors. The optical sensors included fluorescence (FL), surface plasmon resonance (SPR), colorimetric, and surface-enhanced Raman scattering (SERS), while electrical sensors included electrochemical luminescence (ECL), microfluidic chip, and field-effect transistor (FET). A synopsis of sensing materials, mechanisms, detection limits, and ranges has been provided. The sensing mechanism and materials used were discussed for each category in terms of length, collectively forming a fusing platform to highlight the ultrahigh detection technique of nucleotide sensors. We discussed potential trends in improving the fabrication of nucleotide nanosensors based on low-dimensional materials. In this area, particular aspects, including sensitivity, detection mechanism, stability, and challenges, were addressed. The optimization of the sensing performance and selection of the best sensor were concluded. Recent trends in the atomic-scale simulation of the development of Deoxyribonucleic acid (DNA) sensors using 2D materials were highlighted. A critical overview of the challenges and opportunities of deoxyribonucleic acid sensors was explored, and progress made in deoxyribonucleic acid detection over the past decade with a family of deoxyribonucleic acid sensors was described. Areas in which further research is needed were included in the future scope.

A versatile CRISPR Cas12a-based point-of-care biosensor enabling convenient glucometer readout for ultrasensitive detection of pathogen nucleic acids

Pathogen nucleic acid detection is of great significance to control the spread of diseases caused by the viruses. Nevertheless, traditional methods for nucleic acid detection such as polymerase chain reaction (PCR) and oligonucleotide microarrays require bulky instruments, which restrain their point-of-care (POC) testing application. Here, we proposed a POC method enabling sensitive detection of pathogen nucleic acids by combining the clustered regularly interspaced short palindromic repeat (CRISPR) Cas12a-based assay and personal glucometer readout (PGM). The quantification of target pathogen DNA by PGM was achieved based on pathogen DNA activates Cas12a ssDNase to cleave magnetic bead-DNA-invertase reporter probe, and separated free invertase to catalyze hydrolysis of sucrose to glucose. Without using nucleic acid amplification technology, we demonstrated here dual signal amplifications based on Cas12a and invertase-mediated catalytic reactions, making it possible to sensitively detect HIV-related DNA or SARS-CoV-2 pseudovirus with the limits of detection of 11.0 fM and 50 copies/μL, respectively. This strategy also showed excellent selectivity as well as potential applicability for detection of HIV in human serum samples or of SARS-CoV-2 in saliva samples. Therefore, our CRISPR-PGM-based dual signal amplifications detection platform might offer a great promise in POC diagnosis of pathogen nucleic acids.

Smartphone-Based Pure DNAzyme Hydrogel Platform for Visible and Portable Colorimetric Detection of Cell-Free DNA

Cell-free DNA (cfDNA), as a tumor marker, is of great importance for the diagnosis of cancer and targeted therapy. However, the need for huge analytical instruments for cfDNA analysis has restricted its practical applications, especially in rural areas and third-world countries. Herein, a portable and visual smartphone-based DNAzyme hydrogel platform is developed for cfDNA detection. The target cfDNA triggers rolling circle amplification to produce a G-quadruplex-comprised DNA hydrogel with an horseradish peroxidase (HRP)-like catalytic function, which further catalyzes the chromogenic substrate to generate a visible output signal. Notably, the naked-eye detection of cfDNA can be realized by the macroscale visibility and catalytic ability of the DNA hydrogel. The linear range of the DNAzyme hydrogel platform for cfDNA detection is 0.1 pM-1500 nM with a detection limit of 0.042 pM. Moreover, this platform is exploited for the detection of cfDNA in spiked human serum with favorable sensitivity and recovery. Therefore, the DNAzyme hydrogel platform provides highly promising potential for testing other nucleic acid biomarkers.

A colorimetric biosensor for ultrasensitive detection of the SURF1 gene based on a dual DNA-induced cascade hybridization reaction

In this work, a simple and ultrasensitive colorimetric biosensor for detection of SURF1 gene fragments (Leigh syndrome) has been developed based on a dual DNA-induced cascade hybridization reaction. Firstly, a biotin labeled capture probe was immobilized on a streptavidin labeled 96-well transparent plate surface. Then the target SURF1 fragment and auxiliary probe S1 were added into the reaction system to form a "Y" structure with the capture probe. Furthermore, to achieve a highly efficient signal amplification strategy, digoxin labeled P1, P2, P3 and P4 probes were used to cause a dual DNA-induced cascade hybridization reaction on the "Y" structure of the 96-well plate surface. As a detection probe, the HRP anti-digoxin antibody was combined on the surface to produce a colorimetric response to the SURF1 fragment in the presence of TMB. Under the optimal conditions, the established method exhibited a wide linear range from 1.0 × 10^-13 M to 1.0 × 10^-8 M and a detection limit to SURF1 as low as 1.73 × 10^-14 M. In addition, the strategy has been successfully applied to the detection of SURF1 in spiked human serum samples. Therefore, the established biosensor has potential application prospects in gene fragment analysis and early diagnosis of clinical diseases.

DNA-Tetrahedral-Nanostructure-Based Entropy-Driven Amplifier for High-Performance Photoelectrochemical Biosensing

In virtue of the inherent molecular recognition and programmability, DNA has recently become the most promising for high-performance biosensors. The rationally engineered nucleic acid architecture will be very advantageous to hybridization efficiency, specificity, and sensitivity. Herein, a robust and split-mode photoelectrochemical (PEC) biosensor for miRNA-196a was developed based on an entropy-driven tetrahedral DNA (EDTD) amplifier coupled with superparamagnetic nanostructures. The DNA tetrahedron structure features in rigidity and structural stability that contribute to obtain precise identification units and specific orientations, improving the hybridization efficiency, sensitivity, and selectivity of the as-designed PEC biosensor. Further, superparamagnetic Fe₃O₄@SiO₂@CdS particles integrated with DNA nanostructures are beneficial for the construction of a split-mode, highly selective, and reliable PEC biosensor. Particularly, the enzyme- and hairpin-free EDTD amplifier eliminates unnecessary interference from the complex secondary structure of pseudoknots or kissing loops in typical hairpin DNAs, significantly lowers the background noise, and improves the detection sensitivity. This PEC biosensor is capable of monitoring miRNA-196a in practical settings with additional advantages of efficient electrode fabrication, stability, and reproducibility. This strategy can be extended to various miRNA assays in complex biological systems with excellent performance.

Improving Immunoassay Performance with Cleavable Blocking of Microarrays

Among the key issues that are commonly associated with the development of microarray-based assays are nonspecific binding and diffusion constraints. Here we present a novel strategy addressing both of these challenges simultaneously. The essence of the method consists in blocking the microarray surface with a blocking agent containing a perfluoroalkyl chain and a disulfide linker. The resulting surface is hydrophobic, and no immiscible liquid layer remains on it upon cyclically draining and replenishing the sample solution, ensuring an efficient mass transfer of an analyte onto a microarray. Prior to the signal detection procedure, disulfide bonds are chemically cleaved, and the perfluoroalkyl chains are removed from the microarray surface along with nonspecifically adsorbed proteins, resulting in extremely low background. Using conventional fluorescent detection, we show a 30-fold increase in signal/background ratio compared to a common epoxy-modified glass substrate. The combination of this technique with magnetic beads detection results in a simple and ultrasensitive cholera toxin (CT) immunoassay. The limit of detection (LOD) is 1 fM, which is achieved with an analyte binding time of 1 h. Efficient mass transfer provides highly sensitive detection of whole virus particles despite their low diffusion coefficient. The achieved LOD for vaccinia virus is 10⁴ particles in 1 mL of sample. Finally, we have performed for the first time the simultaneous detection of whole virus and CT protein biomarker in a single assay. The developed technique can be used for multiplex detection of trace amounts of pathogens of various natures.

Applying CRISPR-Cas12a as a Signal Amplifier to Construct Biosensors for Non-DNA Targets in Ultralow Concentrations

Efficient signal amplification is essential to construct ultrasensitive biosensors for biologically relevant species with abundant concomitant interferences. Here, we apply LbaCas12a as a signal amplifier to develop a versatile CRISPR-Cas12a platform to detect a wide range of analytes in ultralow concentrations. The platform relies on the indiscriminate single-stranded DNase activity of LbaCas12a, which recognizes single-stranded DNA intermediates generated by non-DNA targets down to femtomolar concentrations and subsequently enhances the fluorescence signal output. With the help of functional nucleotides (DNAzyme and aptamer), ultrasensitive bioassays for Pb²⁺ and Acinetobacter baumannii have been designed with a limit of detection down to ∼0.053 nM and ∼3 CFU/mL, respectively. It also allows simultaneous detection of four microRNAs (miRNAs) at a picomolar concentration without significant interferences by other counterparts, suggesting the potential of multiplexed miRNA expression profiles analysis in high throughput. Given the versatility and generality of the CRISPR-Cas12a platform, we expect the current work to advance the application of CRISPR-Cas-based platforms in bioanalysis and provide new insights into ultrasensitive biosensor design.

Rapid Ultrasensitive Gel-Free Immunoblotting with Magnetic Labels

Immunoblotting is widely used for the detection of proteins using specific antibodies. We present here a new immunoblotting method, which is characterized by exceptional sensitivity, rapidness, and low consumption of antibodies. A thin conductive layer between touching hydrophilic cellulose membranes instead of polyacrylamide gel is used for the electrophoretic separation of proteins. Contrary to common Western blotting, the separation occurs in nondenaturing conditions. The membrane surface is smoothed by deposition of the cellulose layer and modified with azidophenyl groups, allowing for the photochemical in situ immobilization of proteins, which are carried out after the electrophoresis. Thus, the additional step of transferring the protein from the gel onto the membrane is eliminated. Specific protein bands are then visualized by decoration with magnetic beads. The limit of detection of interleukin IL-1β reaches 0.3 fg or ∼10⁴ molecules, whereas the total blotting time is about 5 min. The application of the technique is demonstrated by the detection of IL-1β, total IgA, and IgA specific to Mycobacterium tuberculosis antigen in the exhaled breath samples, obtained from healthy subjects and tuberculosis patients.