Multistage Signals Based on Cyclic Chemiluminescence for Decoding Complex Samples

Recent progress of cataluminescence sensing based on gas-solid interfaces

Cataluminescence (CTL) has emerged as a sensing transduction principle of gas-solid interface for constructing gas sensors that present fast response, high sensitivity, and online monitoring. It has thus been widely associated with the field of chemical analysis and catalytic science. Herein, the latest developments in CTL sensors are reviewed, and the status quo of CTL-based gas sensing systems is discussed. In particular, the basic principles and sensing systems of CTL are outlined, including performance enhancement strategies for specific targets and recognition methods for multiple targets. Moreover, the important applications of CTL sensors are listed and classified, including environmental pollutant monitoring, product quality control, clinical diagnosis, and evaluation of catalyst performance. Finally, based on abundant case reports, the current conundrums of CTL sensors are summarized and their future development trends are also put forward.

Efficient Discrimination of Hazardous Organophosphate Flame Retardants via Cataluminescence-Based Multidimensional Ratiometric Sensing

Emerging contaminants have recently evolved into a severe worldwide environmental issue. Organophosphate flame retardants (OPFRs) with neurotoxicity, genotoxicity, and reproductive and developmental toxicity are a class of notorious emerging contaminants that cause great concern. The development of high-efficiency and portable sensors for rapid online monitoring of OPFRs has become the primary demand for the exploration of the environmental migration and transformation of OPFRs. In this work, interestingly, the cataluminescence (CTL) phenomenon of OPFRs is first observed, and an ingenious multidimensional ratiometric CTL sensing strategy is developed for the recognition of multiple OPFRs. Three characteristic ratios are extracted from the multipeak CTL spectral curves based on energy transfer of single Tb/Eu-modified MgO sensing material, and thus a novel three-dimensional (3D) code recognition could be mapped out. This obtained 3D coordinate is found to be a unique characteristic for a given OPFR, just like an exclusive person's ID number, which can successfully discriminate and detect 10 kinds of OPFR vapors, including homologous series and isomers. More importantly, CTL mechanism investigations for OPFRs demonstrate that OPFRs undergo a series of chemical reaction processes, e.g., oxidative pyrolysis and hydroxylation, and different high-energy excited intermediates are generated, which trigger discrepant energy-transfer efficiency toward rare earth ions, leading to multipeak spectral profiles. Briefly, this proposed CTL analytical platform for OPFRs recognition initiates a new sensing principle for the efficient identification of emerging contaminants and shows significant prospects on rapid on-site detection.

Liquid-Phase Cyclic Chemiluminescence for the Identification of Cobalt Speciation

Accurate discrimination of metal species is a significant analytical challenge. Herein, we propose a novel methodology based on liquid-phase cyclic chemiluminescence (CCL) for the identification of cobalt speciation. The CCL multistage signals (In) of the luminol-H2O2 reaction catalyzed by different cobalt species have different decay coefficients k. Thereby, we can facilely identify various cobalt species according to the distinguishable k values, including the complicated and structurally similar cobalt complexes, such as analogues of [Co(NH3)5X]n+ (X = Cl-, H2O, and NH3), Co(II) porphyrins, and bis(2,4-pentanedione) cobalt(II) derivatives. Especially, the number of substituent atoms also influences the k value greatly, which allows excellent discrimination between complexes that only have a subtle difference in the substituent group. In addition, linear discriminant analysis based on In provides a complementary solution to improve the differentiating ability. We performed density functional theory calculations to investigate the interaction mode of H2O2 over cobalt species. A close negative correlation between the adsorption energy and the k value is observed. Moreover, the calculation of energy evolutions of H2O2 decomposition into a double hydroxide radical shows that a high level of consistency exists between the activation energy barrier and the k value. The results further demonstrate that the decay coefficient of the CCL multistage signal is associated with the catalytic reactivity of the cobalt species. Our work not only broadens the application of chemiluminescence but also provides a complementary technology for speciation analysis.

Determination of acetic acid in enzymes based on the cataluminescence activity of graphene oxide-supported carbon nanotubes coated with NiMn layered double hydroxides

A cataluminescence (CTL) method has been developed for the rapid determination of acetic acid in enzyme products. The NiMn LDH/CNT/GO was synthesized based on the nanohybridization of NiMn layered double hydroxide (NiMn LDH), carbon nanotubes (CNTs), and graphene oxide (GO). The composite has excellent CTL activity against acetic acid. It could be ascribed to the larger specific surface area and more exposure to active sites. NiMn LDH/CNT/GO is used as a catalyst in the CTL method based on its special structure and advantages. There is a linear relationship between CTL response and the acetic acid concentration in the range 0.31-12.00 mg·L^-1 with the detection limit of 0.10 mg·L^-1. The developed method is rapid and takes only about 13 s. The method is applied to the determination of acetic acid in enzyme samples with little sample preparation. The result of the CTL method shows good agreement with that of the gas chromatography method. The proposed CTL method possesses promising potential in the quality monitoring of enzymes.

Chiral-Controlled Cyclic Chemiluminescence Reactions for the Analysis of Enantiomer Amino Acids

The similarity and complexity of chiral amino acids (AAs) in complex samples remain a significant challenge in their analysis. In this work, the chiral metal-organic framework (MOF)-controlled cyclic chemiluminescence (CCL) reaction is developed and utilized in the analysis of enantiomer AAs. The chiral MOF of d-Co_0.75Zn_0.25-MOF-74 is designed and prepared by modifying the Co_0.75Zn_0.25-MOF-74 with d-tartaric acid. The developed chiral bimetallic MOF can not only offer the chiral recognize sites but also act as the catalyst in the cyclic luminol-H₂O₂ reaction. Moreover, a distinguishable CCL signal can be obtained on enantiomer AAs via the luminol-H₂O₂ reaction with the control of d-Co_0.75Zn_0.25-MOF-74. The amplified difference of enantiomer AAs can be quantified by the decay coefficient (k-values) which are calculated from the exponential decay fitting of their obtained CCL signals. According to simulation results, the selective recognition of 19 pairs of AAs is controlled by the pore size of the MOF-74 and their hydrogen-bond interaction with d-tartaric acid on the chiral MOF. Furthermore, the k-values can also be used to estimate the change of chiral AAs in complex samples. Consequently, this chiral MOF-controlled CCL reaction is applied to differentiate enantiomer AAs involved in the quality monitoring of dairy products and auxiliary diagnosis, which provides a new approach for chiral studies and their potential applications.

Rapid quantification of acid value in frying oil using iron tetraphenylporphyrin fluorescent sensor coupled with density functional theory and multivariate analysis

Metalloporphyrin-based fluorescent sensor was developed for the acid value in frying oil. The electronic and structural performances of iron tetraphenylporphyrin (FeTPP) were theoretically investigated using time-dependent density functional theory (TD-DFT) and DFT at the B3LYP/LANL2DZ level. The quantified FeTPP-based fluorescent sensor results revealed its excellent performance in discriminating different analytes. In the present work, the acid value of palm olein was determined after every single frying cycle. A total of 10 frying cycles were conducted each day for 10 consecutive days. The FeTPP-based fluorescent sensor was used to quantify the acid value and the results were compared with the chemical data obtained by conventional titration method. The synchronous fluorescence spectrum for each sample was recorded. Parallel factor analysis (PARAFAC) was used to decompose the three-dimensional spectrum data. Then, the support vector regression (SVR), partial least squares (PLS), and back-propagation artificial neural network (BP-ANN) methods were applied to build the regression models. After the comparison of the constructed models, the SVR models exhibited the highest correlation coefficients among all models, with 0.9748 and 0.9276 for the training and test set, respectively. The findings suggested the potential of FeTPP-based fluorescent sensor in rapid monitoring of the used frying oil quality and perhaps also in other foods with higher oil content.

Multifunctional MgO/HKUST-1 Composite for Capture, Catalysis, and Cyclic Cataluminescence Detection of Esters All-In-One to Rapidly Identify Scented Products

The integration of metallic oxide and metal-organic frameworks has attracted considerable attention as obtained composite materials because they show synergistic effects in applications of catalysis and sensing. Herein, we developed the hybrid MgO and HKUST-1 for efficient capture, catalysis, and cyclic cataluminescence (CCTL) detection of esters all-in-one to rapidly identify scented products. The multifunctional MgO/HKUST-1 composite with high CCTL activity was synthesized and characterized. The multifunctional MgO/HKUST-1 composite acts as an enrichment material for ester capture and serves as a catalyst, assisting the analyte to trigger multistage signals. The multistage signals of ester-containing scented products also satisfy the exponential decay equation with a certain τ-value. The τ-values obtained by the CCTL system were applied to identify the brands of essential oils. The working temperature served as the sensor element to obtain various τ-values. The τ-values constituted a digital code to label the different brands of cigarettes with the same aroma type. The multistage signals could be used to distinguish the origin regions of essential oils and tobacco. This work combines the CCTL strategy with the sample pretreatment, opening up a new direction to develop CCL and providing a new platform to rapidly identify ester-containing scented products.

Evaluating the Band Gaps of Semiconductors by Cataluminescence

A rapid and efficient methodology for the evaluation of band gaps of semiconductors is highly desirable to analyze and assess the intrinsic properties and extending application scopes of semiconductor materials. Here, the negative correlation of the cataluminescence (CTL) signal in the presence of H₂S and the band gap of Aurivillius-type perovskite oxide Bi_4+nFe_nTi₃O_12+3n (n = 1-4) was confirmed, where the H₂S-induced CTL signal acts as a probe to evaluate the band gaps of semiconductor materials. The related mechanism shows that the thermal energy obtained by heating makes the electrons in the valence band more easily excite into the conduction band of a narrower band gap material and further promotes electron transfer between the gaseous compounds and semiconductor materials, causing acceleration of the catalytic oxide process. In addition, the extensibility was further verified by exploring the layered perovskite containing other insertion structures, including Bi_4+nCo_nTi₃O_12+3n (n = 1-4), Bi₅NiTi₃O₁₅, and Bi₅MnTi₃O₁₅, which was also consistent with the results characterized by UV diffuse reflectance spectroscopy. The established CTL probe for band gap evaluation shows rapid response, is simple to operate, and is of low cost, which is expected to become an innovative alternative to the conventional band gap assessment approach.

Rapid chiral analysis based on liquid-phase cyclic chemiluminescence

Rapid chiral analysis has become one of the important aspects of academic and industrial research. Here we describe a new strategy based on liquid-phase cyclic chemiluminescence (CCL) for rapid resolution of enantiomers and determination of enantiomeric excess (ee). A single CCL measurement can acquire multistage signals that provide a unique way to examine the intermolecular interactions between chiral hosts and chiral guests, because the lifetime (τ) of the multistage signals is a concentration-independent and distinguishable constant for a given chiral host-guest system. According to the τ values, CCL allows discrimination between a wide range of enantiomeric pairs including chiral alcohols, amines and acids by using only one chiral host. Even the chiral systems hardly distinguished by nuclear magnetic resonance and fluorescence methods can be distinguished easily by CCL. Additionally, the τ value of a mixture of two enantiomers is equal to the weighted average of each enantiomer, which can be used for the direct determination of ee without the need to separate the chiral mixture and create calibration curves. This is extremely crucial for the cases without readily available enantiomerically pure samples. This strategy was successfully applied to monitoring of the Walden inversion reaction and analysis of chiral drugs. The results were in good agreement with those obtained by high-performance liquid chromatography, indicating the utility of CCL for routine quick ee analysis. Mechanism study revealed that the τ value is possibly related to the activity of the chiral substance to catalyze a luminol-H2O2 reaction. Our research provides an unprecedented and general protocol for chirality differentiation and ee determination, which is anticipated to be a useful technology that will find wide application in chirality-related fields, particularly in asymmetric synthesis and the pharmaceutical industry.