p-Bromophenol-Enhanced Bienzymatic Chemiluminescence Competitive Immunoassay for Ultrasensitive Determination of Aflatoxin B1

Highly sensitive and label free on-site monitoring immunosensor for detection of Aflatoxin B1 from real samples

Aflatoxin B1 (AF-B1) are toxins secreted by secondary metabolites of molds that have adverse effects on humans and animals resulting in huge economic losses. Here we report on field useable, cost effective and direct electrochemical sensor based on conducting polymer composite electrode, Poly (3,4-ethylenedioxythiophene): polystyrene sulphonic acid (PEDOT-PSS) for label-free detection of AF-B1. Structural and morphological characterization of composite electrodes were carried out using XRD and SEM. We compared two different electroanalytical techniques namely, transient capacitance and differential pulse voltammetry, to select the most prominent technique for analyzing the mycotoxin easily. For direct detection of AF-B1, transient capacitance measurement at 77 and 1000 Hz was employed wherein sensor showed linearity in 18.18-300.0 ng mL-1 range at 77 Hz for AF-B1. Best limit of detection (LOD) for AF-B1 was 55.41 ng mL-1 (369 pM) at 77 Hz with very good repeatability. DPV showed linearity in the range 18.18-342.85 ng mL-1 with LOD 435 pM. For demonstration of application of this sensor directly using minimum sample preparation, AF-B1 sensing has been confirmed successfully using white button mushrooms and okra stored at ambient conditions. Sensor response with real samples suggest usefulness of sensor to monitor stored farm products easily.

A Highly Sensitive and Group-Specific Enzyme-Linked Immunosorbent Assay (ELISA) for the Detection of AFB1 in Agriculture and Aquiculture Products

Aflatoxins (AFs) including AFB1, AFB2, AFG1 and AFG2 are widely found in agriculture products, and AFB1 is considered one of the most toxic and harmful mycotoxins. Herein, a highly sensitive (at the pg mL-1 level) and group-specific enzyme-linked immunosorbent assay (ELISA) for the detection of AFB1 in agricultural and aquiculture products was developed. The AFB1 derivative containing a carboxylic group was synthesized and covalently linked to bovine serum albumin (BSA). The AFB1-BSA conjugate was used as an immunogen to immunize mice. A high-quality monoclonal antibody (mAb) against AFB1 was produced by hybridoma technology, and the mAb-based ELISA for AFB1 was established. IC50 and limit of detection (LOD) of the ELISA for AFB1 were 90 pg mL-1 and 18 pg mL-1, respectively. The cross-reactivities (CRs) of the assay with AFB2, AFG1, and AFG2 were 23.6%, 42.5%, and 1.9%, respectively, revealing some degree of group specificity. Corn flour, wheat flour, and crab roe samples spiked with different contents of AFB1 were subjected to ELISA procedures. The recoveries and relative standard deviation (RSD) of the ELISA for AFB1 in spiked samples were 78.3-116.6% and 1.49-13.21% (n = 3), respectively. Wheat flour samples spiked with the mixed AF (AFB1, AFB2, AFG1, AFG2) standard solution were measured by ELISA and LC-MS/MS simultaneously. It was demonstrated that the proposed ELISA can be used as a screening method for evaluation of AFs (AFB1, AFB2, AFG1, AFG2) in wheat flour samples.

Construction of Magnetic Core-Large Mesoporous Satellite Immunosensor for Long-Lasting Chemiluminescence and Highly Sensitive Tumor Marker Determination

Chemiluminescence immunoassay exhibits high sensitivity and signal-to-noise ratio, thus attracting great attention in the early diagnosis and dynamic monitoring of diseases. However, the collection of conventional flash-type chemiluminescence signal (<5 s) relies heavily on automatic sampling and reading instrument. Herein, a novel core-satellite multifunctional chemiluminescence immunosensor is designed for the efficient enrichment and highly sensitive determination of cancer biomarker carcinoembryonic antigen (CEA) with enhanced and long-lasting output signal that can be conveniently recorded by a simple microplate plate reading instrument. Anti-CEA monoclonal antibody 2 (Ab2) modified Fe3 O4 @SiO2 microspheres (Fe3 O4 @SiO2 -Ab2, 370 nm in diameter) are synthesized as the core for selectively capturing and enriching target CEA in solution, and anti-human CEA monoclonal antibody 1 (Ab1) and horseradish peroxidase (HRP) co-immobilized dendritic large-mesoporous silica nanospheres (MSNs-HRP/Ab1, 80 nm in diameter, pore size: 17 nm) are synthesized as the satellite for efficient immunological recognition and signal amplification. The as-designed core-satellite magnetic chemiluminescence immunosensors exhibit a broad linear range of 0.01-20 ng mL-1 and a low detection limit of 3.0 pg mL-1 for the convenient, highly specific, and sensitive determination of CEA in human serum. Such core-satellite chemiluminescence immunosensors are expected to act as a powerful tool for in vitro detection of various biomarkers, overcome the defect of conventional chemiluminescence relying heavily on expensive and bulky automatic instruments and popularize chemiluminescence analysis to primary medical institutions and remote areas.

Computer vision-assisted smartphone microscope imaging digital immunosensor based on click chemistry-mediated microsphere counting technology for the detection of aflatoxin B1 in peanuts

Aflatoxin B1 is a carcinogenic contaminant in food or feed, and it poses a serious health risk to humans. Herein, a computer vision-assisted smartphone microscope imaging digital (SMID) immunosensor based on the click chemistry-mediated microsphere counting technology was designed for the detection of aflatoxin B1 in peanuts. In this SMID immunosensor, the modified polystyrene (PS) microspheres were used as the signal probes and were recorded by a smartphone microscopic imaging system after immunoreaction and click chemistry reaction. The number of PS probes is adjusted by aflatoxin B1. The customized computer vision procedure was used to efficiently identify and count the obtained PS probes. This SMID immunosensor enables sensitive detection of aflatoxin B1 with a linear range from 0.001 ng/mL to 500 ng/mL, providing a simple, sensitive, and portable tool for food safety supervision.

Nanoassemblies Based on a Cationic Perylene Diimide Derivative and Sodium Dodecyl Sulfate: A Simple Fluorescent Platform for Efficient Analysis of Aflatoxin B1

Aflatoxin B₁ (AFB₁) is a kind of potently carcinogenic fungal metabolite in food threatening human health, and it is crucial and challenging to develop advanced nonimmune approaches for AFB₁ determination. Addressing this challenge, we successfully constructed a nanoassembly (PdE-PDI/SDS) by noncovalently coupling a cationic perylene diimide derivative (PdE-PDI) and sodium dodecyl sulfate (SDS), exhibiting high-density charges and a specific surface area for rapid sensing of AFB₁. The large electronic conjugate structure and rigid plane of PdE-PDI enable it to form more stable σ-π, π-π coordination, and hydrogen bonds with AFB₁. Additionally, the introduction of SDS significantly amplifies noncovalent interactions and enhances the quenching efficiency of PdE-PDI toward AFB₁. The proposed PdE-PDI/SDS exhibited excellent specificity to AFB₁ and showed dosage-sensitive detection with detection limit as low as 0.74 ng mL^-1. Finally, the PdE-PDI/SDS was successfully applied in cereal samples with good recoveries from 94.61 to 109.92%. To our knowledge, this is the first time a fluorescent strategy from the point of self-assembly for AFB₁ determination is reported, which holds great promise for wide applications of perylene diimide derivative in food safety.

Integrating Ordered Two-Dimensional Covalent Organic Frameworks to Solid-State Nanofluidic Channels for Ultrafast and Sensitive Detection of Mercury

Grafting specific recognition moieties onto solid-state nanofluidic channels is a promising way for selective and sensitive sensing of analytes. However, the time-consuming interaction between recognition moieties and analytes is the main hindrance to the application of nanofluidic channel-based sensors in rapid detection. Here, we show the integration of ordered two-dimensional covalent organic frameworks (2D COFs) to solid-state nanofluidic channels to achieve rapid, selective, and sensitive detection of contaminants. As a proof of concept, a thiourea-linked 2D COF (JNU-3) as the recognition unit is covalently bonded on the stable artificial anodic aluminum oxide nanochannels (AAO) to fabricate a JNU-3@AAO-based nanofluidic sensor. The rapid and selective interaction of Hg(II) with the highly ordered channels of JNU-3 allows the JNU-3@AAO-based nanofluidic sensor to realize ultrafast and precise determination of Hg(II) (90 s) with a low limit of detection (3.28 fg mL^-1), wide linear range (0.01-100 pg mL^-1), and good precision (relative standard deviation of 3.8% for 11 replicate determination of 10 pg mL^-1). The developed method was successfully applied to the determination of mercury in a certified reference material A072301c (rice powder), real water, and rice samples with recoveries of 90.4-99.8%. This work reveals the great potential of 2D COFs-modified solid-state nanofluidic channels as a sensor for the rapid and precise detection of contaminants in complicated samples.

Ratiometric Luminescence Aptasensor Based on Dual-Emissive Persistent Luminescent Nanoparticles for Autofluorescence- and Exogenous Interference-Free Determination of Trace Aflatoxin B1 in Food Samples

Sensitive and accurate determination of aflatoxin B1 (AFB1) is of great significance to food safety and human health as it is recognized as the most toxic mycotoxin and carcinogenic. Herein, we report a ratiometric luminescence aptasensor based on dual-emissive persistent luminescent nanoparticles (PLNP) for the accurate determination of trace AFB1 in complex food samples without autofluorescence and exogenous interference. Dual-emissive PLNP ZnGa₂O₄:Cr_0.0001 was prepared first and acted as the donor for energy transfer as well as the signal unit with phosphorescence at 714 and 508 nm (the detection and the reference signal, respectively). AFB1 aptamer was then bonded on the surface of PLNP to offer specific recognition ability. Aptamer complementary DNA modified with Cy5.5 was employed as the acceptor for energy transfer and the quenching group to eventually develop a turn-on ratiometric luminescence aptasensor. The developed ratiometric luminescence aptasensor combined the merits of long-lasting luminescence, in situ excitation and autofluorescence-free of PLNP, exogenous interference-free and self-calibration reading of ratiometric sensor, as well as the high selectivity of aptamer, holding great promise for accurate determination of trace AFB1 in complex matrix. The developed ratiometric aptasensor exhibited excellent linearity (0.05-70 ng mL^-1), low limit of detection (0.016 ng mL^-1), and good precision (2.3% relative standard deviation for 11 replicate determination of 1 ng mL^-1 AFB1). The proposed ratiometric aptasensor was successfully applied for the determination of AFB1 in corn, wheat, peanut, millet, oats, and wheat kernels with recoveries of 95.1-106.5%.

Ultrafast Ratiometric Detection of Aflatoxin B1 Based on Fluorescent β-CD@Cu Nanoparticles and Pt2+ Ions

Rapid detection of aflatoxin B1 (AFB1) is a very important task in food safety monitoring. However, it is still challenging to achieve highly sensitive detection without antibody or aptamer biomolecules. In this work, a rapid detection of aflatoxin B1 was achieved using a ratiometric fluorescence probe without antibody or aptamer for the first time. In the ratiometric fluorescence system, the fluorescence emission of AFB1 at 433 nm was significantly enhanced due to the β-cyclodextrin-AFB1 host-guest interaction and the complexation of AFB1 and Pt²⁺. Meanwhile, the inclusion of aflatoxin B1 also quenched the fluorescence emission of β-CD@Cu nanoparticles (NPs) at 650 nm based on inner filter effect mechanism. On the basis of the above effects, the ratiometric detection of aflatoxin B1 was achieved in the range of 0.03-10 ng/mL with a low detection limit of 0.012 ng/mL (3σ/s). In addition, the β-CD@Cu NPs based nanoprobe could achieve stable response within 1 min to AFB1. The above ratiometric detection also demonstrated excellent application potential in the rapid on-site detection of AFB1 in food due to the advantages of convenience, rapidness, and high accuracy.

A novel fluorescent aptasensor based on exonuclease-assisted triple recycling amplification for sensitive and label-free detection of aflatoxin B1

Aflatoxins are the most toxic type of mycotoxins, which may cause serious carcinogenesis, teratogenesis, and mutagenesis to humans and animals. In this work, we demonstrate a novel label-free fluorescent aptasensor based on exonuclease-assisted triple recycling amplification for the sensitive detection of aflatoxin B1 (AFB1). With the close cooperation of T7 exonuclease and three elaborately designed hairpin probes, the target AFB1 can perform three consecutive cycles of amplification reactions. In this process, each hairpin probe is fully utilized, and the target AFB1, the secondary target and the tertiary target are recycled, thereby achieving a high amplification. Interestingly and importantly, the secondary and tertiary targets generated by amplification are also excellent DNA template sequences for silver nanoclusters (AgNCs). In the presence of NaBH₄ and AgNO₃, a great number of DNA-AgNCs are synthesized, thereby producing a strong fluorescent signal. Under optimal conditions, the developed aptasensor exhibited high sensitivity to AFB1 with a low detection limit of 0.19 pg mL^-1 and a wide dynamic range of 1 × 10^-6-1 μg mL^-1. In addition, the aptasensor also performed well in the determination of AFB1 in real samples.

Prevent or Cure-The Unprecedented Need for Self-Reporting Materials

Self-reporting smart materials are highly relevant in modern soft matter materials science, as they allow for the autonomous detection of changes in synthetic polymers, materials, and composites. Despite critical advantages of such materials, for example, prolonged lifetime or prevention of disastrous material failures, they have gained much less attention than self-healing materials. However, as diagnosis is critical for any therapy, it is of the utmost importance to report the existence of system changes and their exact location to prevent them from spreading. Thus, we herein critically review the chemistry of self-reporting soft matter materials systems and highlight how current challenges and limitations may be overcome by successfully transferring self-reporting research concepts from the laboratory to the real world. Especially in the space of diagnostic self-reporting systems, the recent SARS-CoV-2 (COVID-19) pandemic indicates an urgent need for such concepts that may be able to detect the presence of viruses or bacteria on and within materials in a self-reporting fashion.

Luminescence method for detection of aflatoxin B1 using ATP-releasing nucleotides

Determination of aflatoxin B1 (AFB1) is still a big issue in food safety. In this paper, we developed a luminescence AFB1 detection method combined with ATP-releasing nucleotides (ARNs) and AFB1 aptamer. Firstly, using a new coupling method, we synthesized two ARNs (dTP₄A and dGP₄A) in a yield of 67% and 58%, respectively. The newly prepared ARNs show a much lower background. Then, we developed a new isothermal polymerase amplification method. In this method, two DNA hairpins were used to substitute the circle DNA template in rolling circle amplification. Using this amplification method and combined with AFB1 aptamer, a new AFB1 detection method is developed. A detection limit as low as 0.3 pM is achieved. This method is simple and efficient, and will have a great potential to be used for food safety and public health.

Schematic illustration of a luminescence short DNA sequence detection method using ATP-releasing nucleotides. Combined with AFB1 aptamer, this method is used to detect AFB1.

Quantitative detection of aflatoxin B1 using quantum dots-based immunoassay in a recyclable gravity-driven microfluidic chip

To achieve rapid and sensitive detection of aflatoxin B₁ (AFB₁), we developed a polydimethylsiloxane gravity-driven cyclic microfluidic chip using the two-signal mode strategy. The structural design of the chip, together with the two-wavelength quantum dot ratio fluorescence, effectively eliminates the influence of environmental factors, improves the signal stability, and ensures that the final detection result positively correlates with the target concentration. Moreover, the theoretical analysis performed for the established physical model of the three-dimensional reaction interface inside the chip confirmed the improved reaction rate of immune adsorption in the microfluidic strategy. Overall, the method exhibited a wide analytic range (0.2-500 ng mL^-1), low detection limit (0.06 ng mL^-1), high specificity, good precision (coefficient of variation < 5%), excellent reusability (20 times, 89.1%) and satisfactory practical sample analysis capacity. Furthermore, the reusability and designability of this chip provide a reliable scheme for field detection of AFB₁, analysis of other small molecules, and establishment of high-throughput detection systems under different conditions.

Recent progress of personal glucose meters integrated methods in food safety hazards detection

Development of personal glucose meters (PGMs) for blood glucose monitoring and management by the diabetic patients has been a long history since its first invention in 1968 and commercial application in 1975. The main reasons for its wide acceptance and popularity can be attributed mainly to the easy operation, test-to-result model, low cost, and small volume of sample required for blood glucose concentration test. During past decades, advances in analytical techniques have repurposed the use of PGMs into a general point-of-care testing platform for a variety of non-glucose targets, especially the food hazards. In this review, we summarized the recent published research using PGMs to detect the food safety hazards of mycotoxins, illegal additives, pathogen bacteria, and pesticide and veterinary drug residues detection with PGMs. The progress on PGM-based detection achieved in food safety have been carefully compared and analyzed. Furthermore, the current bottlenecks and challenges for practical applications of PGM for hazards detection in food safety have also been proposed.

Smartphone-based reading system integrated with phycocyanin-enhanced latex nanospheres immunoassay for on-site determination of aflatoxin B1 in foodstuffs

Traditional methods for aflatoxin B1 (AFB1) detection are complex, time-consuming, labor-intensive, and high cost. Moreover, they require sophisticated large-scale instrumentation, which limits their on-site rapid detection. Herein, phycocyanin fluorescent nanospheres based on fluorescence immunochromatographic assay were developed for quantitative detection of AFB1 at parts-per-billion (ppb) levels in foodstuffs. Phycocyanin and anti-AFB1 monoclonal antibodies were coupled on the surface of latex nanospheres to amplify the fluorescence signal and improve the sensitivity. The fluorescence intensity was measured by a self-developed smartphone-based reading system. Under the optimal conditions, this approach achieved quantitative point-of-care detection of AFB1 within 25 min. The calibration curve for AFB1 was linear in the range of 0.2-48 ppb, and the limit of detection was 0.16 ppb. The practical applicability of the proposed approach was demonstrated by the determination of AFB1 in naturally contaminated samples, and the results were consistent with HPLC detection.

Novel cobalt-based metal-organic frameworks with superior catalytic performance on N-(4-aminobutyl)-N-ethylisoluminol chemiluminescent reaction

Novel cobalt-based metal-organic frameworks (Co MOFs) were synthesized by a facile "controlled synthesis" strategy. The MOFs displayed superior catalytic performance on the chemiluminescent (CL) reaction between N-(4-aminobutyl)-N-ethylisoluminol (ABEI) and H₂O₂. UV-vis absorption, CL spectrum, ESR, and radical scavenger experiments were conducted for clarifying the catalytic mechanism of Co MOFs. All results revealed that Co MOFs can accelerate decomposition of H₂O₂ and production of OH^•, O₂^•-as well as ¹O₂ radicals. The rapid reaction between these reactive oxygen species and ABEI resulted in the generation of ABEI-ox∗. The excited-state oxidation product emitted a very intensive CL signal with a maximal emission wavelength of 430 nm as it returned to the ground state. To explore their application potential in CL assay, Co MOFs were used as powerful CL reaction catalyst for establishing a very sensitive method for immunoassay of aflatoxin B₁. The detection range was 0.05-60 ng mL^-1, and the limit of detection was 4.3 pg mL^-1. The result for detecting herbal medicine samples demonstrates the acceptable reliability of the Co MOFs-based CL immunoassay. The proof-of-principle work verifies the application potential of Co MOFs on boosting intensive CL signal, and meets the demand for high sensitivity in various bioassay fields.

Paper-based Chemiluminescence Device with Co-Fe Nanocubes for Sensitive Detection of Caffeic Acid

In this work, a new chemiluminescence (CL) system of Co-Fe prussian blue analogs nanocubes (Co-Fe PBA NCs) that can catalyze luminol to produce strong CL in the absence of H₂O₂ was established. Co-Fe PBA NCs have the property of oxidase-like activity, and it can catalyze the generation of active oxygen radicals in a dissolved oxygen system. Since caffeic acid (CA) can remove reactive oxygen species in the system, a sensitive detection method for CA on a paper-based chip was developed. Under the optimal conditions, this method showed a good linear response to CA in the range of 10 - 800 ng mL^-1 with a limit of 3 ng mL^-1. The proposed method had been used for the determination of CA in tea samples. The results may open a new avenue for the catalytic property on luminol CL system without extra oxidants.

Polyaniline@Au organic-inorganic nanohybrids with thermometer readout for photothermal immunoassay of tumor marker

A photothermal immunoassay using a thermometer as readout based on polyaniline@Au organic-inorganic nanohybrids was built. Temperature output is acquired due to the photothermal effect of the photothermal nanomaterial. Polyaniline@Au organic-inorganic nanohybrids were synthesized by interfacial reactions with high photothermal conversion efficiency. A sandwich structure of the immunocomplex was prepared on a microplate for determination of carcinoembryonic antigen (CEA) by polyaniline@Au organic-inorganic nanohybrids as nanolabel. The released heat based on light-to-heat conversion from the photothermal nanolabel under NIR irradiation is detectable using the thermometer. The increased temperature is directly proportional to CEA concentration. The linear range of the photothermal immunoassay is 0.20 to 25 ng mL-1 with determination limit of 0.17 ng mL-1. Polyaniline@Au organic-inorganic nanohybrids with high photothermal conversion efficiency was synthesized as labels to construct photothermal immunosensor. The sandwich-type immunoassay was built on 96 hole plate based on specific binding of antigen and antibody. Carcinoembryonic antigen in sample was detected quantitatively by thermometer readout.

Engineering WS2–Au–HRP-assisted multiple signal amplification strategy for chemiluminescence immunoassay of prostate specific antigen

Engineering of a WS₂–Au–HRP-assisted multiple signal amplification strategy for CL immunoassay of PSA.

Ball-lens assisted sensitivity improvement of fluorescence immunoassay in microchannels

A contactless and ball-lens assisted sensitivity improvement method was present for the fluorescence or luminescence immunoassay in microchannel.

Direct competitive ELISA enhanced by dynamic light scattering for the ultrasensitive detection of aflatoxin B1 in corn samples

Compared with absorbance, scattering-based dynamic light scattering (DLS) signal has higher sensitivity because its light-scattering intensity is very sensitive to changes in size, thereby enhancing the sensitivity. Herein, we first developed a DLS-enhanced direct competitive enzyme-linked immunosorbent assay (DLS-dcELISA) for ultrasensitive detection of aflatoxin B₁ (AFB₁) in corn. By using hydroxyl radical-induced gold nanoparticle (AuNP) aggregation to amplify AuNP scattering signals, the developed DLS-dcELISA exhibited ultrahigh sensitivity for AFB₁. The detection limit was 0.12 pg mL^-1, which was 153- and 385-fold lower than those obtained using plasmonic and colorimetric dcELISA. In addition, the DLS-dcELISA exhibited excellent selectivity, high accuracy, and strong practicality. Overall, this work presented a simple and universal strategy for improving the sensitivity of traditional ELISA platform only by using the sensitive DLS signals. This technique can replace absorbance-based plasmonic or colored signals as immunoassay signal output for enhanced competitive detection of mycotoxins.

Ingenious Electrochemiluminescence Bioaptasensor Based on Synergistic Effects and Enzyme-Driven Programmable 3D DNA Nanoflowers for Ultrasensitive Detection of Aflatoxin B1

Aflatoxin B1 (AFB1), one of the most toxic mycotoxins, has undergone a wide range of studies over the years. The development of rapid, simple, and sensitive analytical methods remains a major challenge for the accurate detection of AFB1 in foodstuffs. In this study, we designed an enhanced and stable ingenious electrochemiluminescence bioaptasensor (IEC-BA) for ultrasensitive detection of AFB1 based on the synergistic effects and enzyme-driven programmable assembled 3D DNA nanoflowers (EPDNs). This synergistic effect was comprised by the competitive impact on auxiliary probes (AP) and the cutting effect of the Hae III. Compared to the traditional aptamer direct-competition method, the synergistic effects ensured that the aptamer was more efficiently and adequately competed away by the target. Also, the redundant double-stranded probes were removed, which greatly facilitates simple, quick, and sensitive detection of AFB1. Besides, a large chunk of positively charged Ru(II) complexes (Ru(bpy)₃²⁺) was accumulated by the utilization of EPDNs, which resulted in tremendous improvement of the sensitivity of the designed method. Thus, even in the presence of trace amounts of AFB1, a sharply visual electrochemiluminescent signal was generated. The proposed method can realize the quantification of AFB1 with a good linear range from 1 ppt (pg mL^-1) to 5 ppb (ng mL^-1) with a detection limit of 0.27 ppt. In addition, it can also be successfully applied for the analysis of AFB1 in a peanut and wheat, with total recoveries ranging from 93.7 to 106.6%. Furthermore, the IEC-BA also exhibited good selectivity, reproducibility, and stability, revealing prospective applications of food safety monitoring and environmental analysis.

Recent Advances in Aflatoxins Detection Based on Nanomaterials

Aflatoxins are the secondary metabolites of Aspergillus flavus and Aspergillus parasiticus and are highly toxic and carcinogenic, teratogenic and mutagenic. Ingestion of crops and food contaminated by aflatoxins causes extremely serious harm to human and animal health. Therefore, there is an urgent need for a selective, sensitive and simple method for the determination of aflatoxins. Due to their high performance and multipurpose characteristics, nanomaterials have been developed and applied to the monitoring of various targets, overcoming the limitations of traditional methods, which include process complexity, time-consuming and laborious methodologies and the need for expensive instruments. At the same time, nanomaterials provide general promise for the detection of aflatoxins with high sensitivity, selectivity and simplicity. This review provides an overview of recent developments in nanomaterials employed for the detection of aflatoxins. The basic aspects of aflatoxin toxicity and the significance of aflatoxin detection are also reviewed. In addition, the development of different biosensors and nanomaterials for aflatoxin detection is introduced. The current capabilities and limitations and future challenges in aflatoxin detection and analysis are also addressed.

Co Single-Atom Catalysts Boost Chemiluminescence

Co single-atom catalysts (SACs) with good aqueous solubility and abundant labelling functional groups were prepared in Co/Fe bimetallic metal-organic frameworks by a facile solvothermal method without high-temperature calcination. In contrast to traditional chemiluminescence (CL) catalysts, Co SACs accelerated decomposition of H₂ O₂ to produce a large amount of singlet oxygen (¹ O₂ ) rather than superoxide (O₂ ^.- ) and hydroxyl radical (OH^. ). They were found to dramatically enhance the CL emission of the luminol-H₂ O₂ reaction by 1349 times, and, therefore, were employed as very sensitive signal probes for conducting CL immunoassay of cardiac troponin I. The detection limit of the target analyte was as low as 3.3 pg mL^-1 . It is the first time that employment of SACs for boosting CL reactions has been validated. The Co SACs can also be employed to trace other biorecognition events with high sensitivity.

Review of Research into the Determination of Acrylamide in Foods

Acrylamide (AA) is produced by high-temperature processing of high carbohydrate foods, such as frying and baking, and has been proved to be carcinogenic. Because of its potential carcinogenicity, it is very important to detect the content of AA in foods. In this paper, the conventional instrumental analysis methods of AA in food and the new rapid immunoassay and sensor detection are reviewed, and the advantages and disadvantages of various analysis technologies are compared, in order to provide new ideas for the development of more efficient and practical analysis methods and detection equipment.

Unusual Selective Response to Glycoprotein over Sugar Facilitates Ultrafast Universal Fluorescent Immunoassay of Biomarkers

The enzyme-linked immunosorbent assay (ELISA) is widely used in clinical diagnostics. However, conventional ELISA is labor-intensive and lengthy. Herein, the sensitive detection of biomarkers with only one-step incubation of 20 min is demonstrated, based on antibody-fused, boronic-acid-decorated carbon nitride nanosheets. The decoration of carbon nitride nanosheets with boronic acid facilitates antibody binding at physiological conditions along with a concomitant fluorescence enhancement. The presence of target antigen results in a decrement of the fluorescence and ensures one-step immunofluorescent detection. The immune recognition of the antibody/target antigen in combination with glucose blocking ensures a highly selective assay of the biomarkers. The protocol is validated by the assay of nonglycoprotein, glycoprotein, and small-molecular-toxin targets. The multiplex target detection capability is demonstrated by the simultaneous assay of the triple cardiac biomarker cTnI, Mb, and CK-MB in human serum.

Intensive and Persistent Chemiluminescence System Based on Nano-/Bioenzymes with Local Tandem Catalysis and Surface Diffusion

A chemiluminescence (CL) system with long persistent and intensive emission is essential for accurate CL quantitative analysis and imaging assay. However, with most known CL systems being flash-type, it is still a great challenge to develop long-lasting CL systems. Here, by combining an iron porphyrin metal-organic frameworks (FePorMOFs) based peroxidase mimic with natural glucose oxidase (GOx), an intensive and persistent CL system is presented on the basis of local tandem catalysis and surface diffusion of the nano-/bioenzymes (FePorMOF/GOx). FePorMOF synthesized by iron porphyrin linker and zirconium ion node possesses high peroxidase catalytic activity and stability. Using luminol and glucose as substrate, the FePorMOF/GOx CL system can produce intensive CL emission containing a plateau period of 7.5 h. The strong CL signal is due to the local tandem generation and reaction of H₂O₂ by GOx and FePorMOF, which avoids the diffusion-limited kinetics and leads to a high catalytic efficiency of the nano-/bioenzymes. On the other hand, the long persistent CL emission is attributed mainly to the enzymatic reaction-controlled H₂O₂ supply and surface diffusion-controlled CL reaction. The proposed CL system is explored for CL imaging sensing of glucose and homogeneous immunoassay of α-fetoprotein. The nano-/bioenzymes CL system exhibits intensive and long constant CL emission in physiological condition, showing promising applications in real-time bioassay and bioimaging.