Separation-Free Electrogenerated Chemiluminescence Immunoassay Incorporating Target Assistant Proximity Hybridization and Dynamically Competitive Hybridization of a DNA Signal Probe

Antibody-Protein-Aptamer Electrochemical Biosensor based on Highly Efficient Proximity-Induced DNA Hybridization on Tetrahedral DNA Nanostructure for Sensitive Detection of Insulin-like Growth Factor-1

Herein, an antibody-protein-aptamer electrochemical biosensor was designed by highly efficient proximity-induced DNA hybridization on a tetrahedral DNA nanostructure (TDN) for ultrasensitive detection of human insulin-like growth factor-1 (IGF-1). Impressively, the IGF-1 antibody immobilized on the top vertex of the TDN could effectively capture the target protein with less steric effect, and the ferrocene-labeled signal probe (SP) bound on the bottom vertex of the TDN was close to the electrode surface for generating a strong initial signal. In the presence of target protein IGF-1 and an aptamer strand, an antibody-protein-aptamer sandwich could be formed on the top vertex of TDN, which would trigger proximity-induced DNA hybridization to release the SP on the bottom vertex of TDN; therefore, the signal response would decrease dramatically, enhancing the sensitivity of the biosensor. As a result, the linear range of the proposed biosensor for target IGF-1 was 1 fM to 1 nM with the limit of detection down to 0.47 fM, which was much lower than that of the traditional TDN designs on electrochemical biosensors. Surprisingly, the use of this approach offered an innovative approach for the sensitive detection of biomarkers and illness diagnosis.

Signal-on electrogenerated chemiluminescence detection of gonyautoxin 1/4 based on proximity ligation-induced an electrode-bound pseudoknot DNA

A "signal on" electrogenerated chemiluminescence (electrochemiluminescence, ECL) aptasensor based on proximity ligation-induced an electrode-bound pseudoknot DNA for sensitive detection of gonyautoxin 1/4 (GTX1/4) was developed on basis of the competitive type reaction mode. Aptamer was adopted as recognition element. Ru(bpy)32+ as ECL signal, was attached on the glassy carbon electrode (GCE) surface modified with nafion and gold nanoparticles (AuNPs) by electrostatic attraction to obtain the ECL platform. The pseudoknot DNA as capture probe, was immobilized onto the ECL platform via Au-S bond to obtain the ECL aptasensor. In the absence of GTX1/4, Y-shape proximate cooperative complex among aptamer, pseudoknot DNA and DNA1 was formed, drawing the ferrocene groups Fc, as ECL quencher) of both pseudoknot DNA and DNA1 near the electrode surface and resulting in low ECL signal. In the presence of GTX1/4, GTX1/4 competed with pseudoknot DNA and DNA1 for aptamer in homogeneous solution, preventing the formation of proximate cooperative complex and keeping the capture DNA in the pseudoknot conformation with Fc groups far away from the electrode surface, generating a high ECL signal. The recovery of ECL intensity increased with the GTX1/4 concentration and allowed the detection of GTX1/4 in the range of 0.01 ng/mL to 10 ng/mL with a detection of limit as low as 6.56 pg/mL. Additionally, the accuracy of this method was validated for analysis of spiked sea water samples with good recoveries, which indicates great potential in commercial application.

A novel efficient intramolecular self-enhanced water-soluble iridium-based electrochemiluminescence reagent and its analytical application in aptamer sensor

In order to overcome the poor solubilities of iridium-based ECL luminophores and explore self-enhanced ECL luminophores, polyethyleneimine (PEI) covalently linked with iridium complex via amide bonds (abbreviated as Ir-PEI) as a new novel intramolecular self-enhanced water-soluble ECL reagent has been unprecedently designed and successfully synthesized in this work. The chemical structure data, FT-IR spectra, photophysical, electrochemical and electrochemiluminescence of this new ECL reagent have been well characterized. In addition, in order to investigate its properties in the real applications, a corresponding new sensitive and specific ECL-based aptasensor to monitor tetracycline (TET) residues in honey and lake water has been further constructed based on this novel self-enhanced reagent of Ir-PEI in this work. This as-prepared intramolecular self-enhanced water-soluble of Ir-PEI illustrated in this work would pave a new avenue to promote the analytical applications of iridium-based ECL luminophores in the future.

Homogeneous immunoassay utilizing fluorescence resonance energy transfer from quantum dots to tyramide dyes deposited on full immunocomplexes

There is an urgent need for homogeneous immunoassays that offer sufficient sensitivity for routine clinical practice. In this study, we have developed a highly sensitive, fluorescence resonance energy transfer (FRET)-based homogeneous immunoassay. Unlike previous FRET-based homogeneous immunoassays, where acceptors were attached to antibody molecules located far from the donor, we employed acceptors to label the entire sandwich-structured immunocomplex, including two antibodies and one antigen. As a result, the FRET signal was amplified by a factor of 10, owing to the reduced distance between the donor and acceptors. We validated our method by quantifying carcinoembryonic antigen (CEA) and α-fetoprotein (AFP) in PBS buffer and blank plasma. The limits of detection (LOD) for CEA and AFP in both PBS buffer and blank plasma were comparable, reaching sub-femtomolar levels. Furthermore, we successfully quantified CEA and AFP in three human plasma samples, thereby confirming the reliability of our method for clinical applications.

Washing-Free Electrochemiluminescence Biosensor for the Simultaneous Determination of N6 Methyladenosines Incorporating a Tri-Double Resolution Strategy

We propose a novel washing-free electrochemiluminescence (ECL) biosensor for the simultaneous detection of two types of N6 methyladenosines-RNAs (m6A-RNAs), which are potential cancer biomarkers, on the basis of binding-induced DNA strand displacement (BINSD). The biosensor integrated a tri-double resolution strategy that combined spatial and potential resolution, hybridization and antibody recognition, and ECL luminescence and quenching. The biosensor was fabricated by separately immobilizing two ECL reagents (gold nanoparticles/g-C3N4 nanosheets and ruthenium bipyridine derivative/gold nanoparticles/Nafion) and the capture DNA probe on the two sections of glassy carbon electrode. As a proof of concept, m6A-Let-7a-5p and m6A-miR-17-5p were chosen as model analytes, while m6A antibody-DNA3/ferrocene-DNA4/ferrocene-DNA5 was designed as an m6A-binding probe and DNA6/DNA7 was designed as a hybridization probe with DNA3 to release the quenching probes ferrocene-DNA4/ferrocene-DNA5. The recognition process led to the quenching of the ECL signals from both probes via BINSD. The proposed biosensor has the advantage of being washing-free. The ECL methods using the fabricated ECL biosensor with the designed probes exhibited a low detection limit of 0.03 pM for two m6A-RNAs and high selectivity. This work reveals that this strategy is promising for developing an ECL method for the simultaneous detection of two m6A-RNAs. The proposed strategy could be expanded to develop the analytical methods for the simultaneous detection of other RNA modifications by changing the antibody and hybridization probe sequences.

Mulberry-like porous-hollow AuPtAg nanorods for electrochemical immunosensing of biomarker myoglobin

Mulberry-like AuPtAg porous hollow nanorods (PHNR) were facilely synthesized for the first time via a wet chemical method, where Au nanorods (Au NR) behaved as sacrificed template. The anisotropic oriented growth and etching process are involved in this synthesis. Their structural and electronic characteristics were scrutinously examined by TEM, EDS, XPS, and electrochemical techniques. The AuPtAg PHNR provided a large specific surface area and exposed a large number of active sites, showing highly enhanced catalytic activity. On this foundation, a label-free electrochemical immunosensor was developed for myoglobin (Myo) assay based on the AuPtAg PHNR. Further, the built sensor exhibited fast and ultrasensitive responses in a linear range of 0.0001 ~ 1000 ng mL^-1 with a low limit of detection (LOD = 0.46 pg mL^-1, S/N = 3), and enabled efficient application to human serum samples with acceptable results. Consequently, the developed AuPtAg PHNR-based platform has a broad prospect in practically monitoring Myo and other biomarkers in clinics.

Washing-free electrogenerated chemiluminescence magnetic microbiosensors based on target assistant proximity hybridization for multiple protein biomarkers

This work reports washing-free electrogenerated chemiluminescence (ECL) magnetic microbiosensors based on target assistant proximity hybridization (TAPH) for multiple protein biomarkers for the first time. As a principle-of-proof, alpha-fetoprotein (AFP) was chosen as a model analyte, and biotin-DNA1 bound streptavidin-coated magnetic microbeads (MMB@SA⋅biotin-DNA1) were designed as the universal capture MMB, while the corresponding two antibodies tagged with DNA2 or DNA3 were utilized as hybrid recognition probes, and ruthenium complex-tagged DNA4-10A was designed as a universal ECL signal probe. When the capture MMB was added into the mixture solution (containing the analyte, hybrid recognition probes, signal probe and tri-n-propylamine), biocomplexes were formed on the MMB. After the resulting MMB was efficiently brought to the surface of a magnetic glassy carbon electrode (MGCE), ECL measurement was performed without a washing step, resulting in an increase in the ECL intensity. A model for ECL measuring the second-order rate constants of hybridization reactions on MMB was derived. It was found that the rate constants for hybridization reactions on MMB in rotating mode are 1.6-fold higher than those in shaking mode, and a suitable DNA length of the signal probe can improve the signal-to-noise ratio. The washing-free ECL method was developed for the determination of AFP with a much lower detection limit (LOD) of 0.04 ng mL^-1. The developed flexible strategy has been extended to determine D-dimer with an LOD of 0.1 ng mL^-1 and myoglobinglobin with an LOD of 1.1 ng mL^-1. This work demonstrated that the proposed strategy of ECL TAPH on MMB at MGCE is a washing-free and flexible promising strategy, and can be extended to qualify other multiple protein biomarkers in real clinical assays.

Recent advances and challenges in developing electrochemiluminescence biosensors for health analysis

This Feature Article simply introduces principles and mechanisms of electrochemiluminescence (ECL) biosensors for the determination of biomarkers and highlights recent advances of ECL biosensors on key aspects including new ECL reagents and materials, new biological recognition elements, and emerging construction biointerfacial strategies with illustrative examples and a critical eye on pitfalls and discusses challenges and perspectives of ECL biosensors for health analysis.

Recent advances in electrochemical proximity ligation assay

Proximity ligation assay (PLA) is a vigorously developed homogeneous immunoassay assisted by DNA combining dual recognition of target protein by pairs of proximity probes, in which the detection of protein is tactfully converted to the detection of DNA. The booming developments in PLA have enabled a variety of ultrasensitive assays for the detection of protein and this concept of PLA is also extended to the detection of nucleic acids and some small molecule. The association between PLA and electrochemical method, defined as electrochemical proximity ligation assay (ECPLA), has gained much interests in disease diagnosis, food safety and environmental assays with the advantages, such as broad range of targets, simplicity, low cost and rapid response. In this review, we took a different perspective to present the history of PLA, the classical ECPLA biosensing methodology as well as the developments of ECPLA based on several key parameters, such as sensitivity, selectivity, reusability and generalization. In addition, the developments of PLA with electrochemiluminescence as readout are also presented. Finally, perspective and some unresolved challenges in ECPLA that can potentially be addressed have also been discussed.

Photoelectrochemical and visual dual-mode sensor for efficient detection of Cry1Ab protein based on the proximity hybridization driven specific desorption of multifunctional probe

Currently, the development of sensitive and visual strategy for Cry1Ab detection, particularly using a switchable dual-mode detection system based on a single component, remains a great challenge. Here, a photoelectrochemical (PEC) and visual dual-mode sensor was designed for Cry1Ab detection based on a proximity hybridization driven multifunctional probe. In the presence of Cry1Ab, specific desorption of the antibody-DNA conjugate was achieved via sufficient proximity hybridization, leading to the selective release of the multifunctional signal probe, i.e., antibody-labeled single-stranded DNA-gold nanoparticles (Ab₁-S1-AuNPs). The released Ab₁-S1-AuNPs reduced the photocurrent signal and produced a colored response, thereby achieving PEC and visual dual-mode detection based on a single component. Owing to the different signal generation mechanisms, two independent signals were obtained simultaneously, which provided self-verification to improve reliability and accuracy. Taking advantage of the PEC sensitive detection and visual prediction, the dual-mode sensor achieved efficient detection of the Cry1Ab protein. The developed sensor was successfully used to determine Cry1Ab in corn, wheat, and soil samples with satisfactory results. This method offers a promising biosensing platform for the on-site detection of Cry1Ab protein.

Hemin-graphene oxide-gold nanoflower-assisted enhanced electrochemiluminescence immunosensor for determination of prostate-specific antigen

An ultrasensitive luminol electrochemiluminescence (ECL) immunosensor was constructed for the detection of prostate specific antigen (PSA) using glucose oxidase-decorated hemin-graphene oxide-gold nanoflowers ternary nanocomposites as probes. Graphene oxide was first modified with hemin and then with gold nanoflowers through an in situ growth method, which has significantly boosted the catalytic activity of this graphene oxide-based peroxidase mimetics. The biocatalytical activity of this ECL immunosensor was thoroughly investigated to achieve selective recognition of the analyte molecules (PSA) by specific binding between antigens and antibodies. The limit of detection was calculated to be 0.32 pg mL^-1 with a signal-to-noise ratio of 3. A broad linear range from 7.5 × 10^-4 to 2.5 ng mL^-1 was obtained. Such step-by-step assembled biosensor showed controlled nanostructure and exhibited promising application in analysis of human serum samples with a recovery range of 90.6-111.8% and a RSD range of 3.9-5.5%.

Covalently grafting first-generation PAMAM dendrimers onto MXenes with self-adsorbed AuNPs for use as a functional nanoplatform for highly sensitive electrochemical biosensing of cTnT

2D MXene-Ti₃C₂T_χ has demonstrated promising application prospects in various fields; however, it fails to function properly in biosensor setups due to restacking and anodic oxidation problems. To expand beyond these existing limitations, an effective strategy to for modifying the MXene by covalently grafting first-generation poly(amidoamine) dendrimers onto an MXene in situ (MXene@PAMAM) was reported herein. When used as a conjugated template, the MXene not only preserved the high conductivity but also conferred a specific 2D architecture and large specific surface areas for anchoring PAMAM. The PAMAM, an efficient spacer and stabilizer, simultaneously suppressed the substantial restacking and oxidation of the MXene, which endowed this hybrid with improved electrochemical performance compared to that of the bare MXene in terms of favorable conductivity and stability under anodic potential. Moreover, the massive amino terminals of PAMAM offer abundant active sites for adsorbing Au nanoparticles (AuNPs). The resulting 3D hierarchical nanoarchitecture, AuNPs/MXene@PAMAM, had advanced structural merits that led to its superior electrochemical performance in biosensing. As a proof of concept, this MXene@PAMAM-based nanobiosensing platform was applied to develop an immunosensor for detecting human cardiac troponin T (cTnT). A fast, sensitive, and highly selective response toward the target in the presence of a [Fe(CN)₆]^3-/4- redox marker was realized, ensuring a wide detection of 0.1-1000 ng/mL with an LOD of 0.069 ng/mL. The sensor's signal only decreased by 4.38% after 3 weeks, demonstrating that it exhibited satisfactory stability and better results than previously reported MXene-based biosensors. This work has potential applicability in the bioanalysis of cTnT and other biomarkers and paves a new path for fabricating high-performance MXenes for biomedical applications and electrochemical engineering.

Contrary Logic Pair Library, Parity Generator/Checker and Various Concatenated Logic Circuits Engineered by a Label-Free and Immobilization-Free Electrochemiluminescence Resonance Energy Transfer System

Herein, a label-free and immobilization-free electrochemiluminescence resonance energy transfer (ECL-RET) system based on graphitic carbon nitride nanosheets (GCNNs)/Ru(phen)32+ donor/acceptor pair is developed, in which the ECL-RET is regulated by regulating the diffusivity of Ru(phen)32+ molecules toward the negatively charged GCNNs through logically programmed DNA hybridization reactions. The two optical signals of GCNNs (445 nm) and Ru(phen)32+ (593 nm) show completely opposite changes through the same one-time DNA hybridization reaction. Based on this ECL-RET system, a contrary logic pair (CLP) library, a parity generator/checker system for differentiating the erroneous bits during data transmission, the parity checker to identify the even/odd natural numbers from 0 to 9, and a series of concatenated logic circuits including a six-input logic gate capable of implementing of 64 input combinations for meeting the needs of computational complexity are developed. The ECL-RET-based molecular logic system avoids the time-consuming, costly and inefficient labeling procedures and the laborious processes of immobilization, presenting great potential for building more complicated and advanced logic gates, and providing a refreshing inspiration for the construction of combinatorial logic circuits based on ECL method.

Ultrasensitive electrochemical detection of hepatitis C virus core antigen using terminal deoxynucleotidyl transferase amplification coupled with DNA nanowires

Early diagnosis of hepatitis C virus (HCV) infection is essential to prevent disease from spreading and progression. Herein, a novel electrochemical biosensor was developed for ultrasensitive detection of HCV core antigen (HCVcAg) based on terminal deoxynucleotidyl transferase (TdT) amplification and DNA nanowires (DNW). After sandwich-type antibody-antigen recognition, the antibody-conjugated DNA was pulled to the electrode surface and further extended into a long DNA sequence by robust TdT reaction. Then, large numbers of methylene blue-loaded DNW (MB@DNW) as signal labels are linked to the extended DNA sequence. This results in an amplified electrochemical signal for HCVcAg determination, typically measured at around -0.25 V (Ag/AgCl). Under the optimum conditions, the proposed biosensor achieved a wide linear range for HCVcAg from 0.1 to 312.5 pg/mL with a low limit of detection of 32 fg/mL. The good practicality of the biosensor was demonstrated by recovery experiment (recoveries from 98 to 104% with RSD of 2.5-4.4%) and comparison with enzyme-linked immunosorbent assay (ELISA). Given the highlighted performance, the biosensor is expected to act as a reliable sensing tool for HCVcAg determination in clinics. Schematic representation of the ultrasensitive electrochemical biosensor based on terminal deoxynucleotidyl transferase (TdT) amplification linked with methylene blue-loaded DNA nanowires (MB@DNW), which can be applied to the determination of hepatitis C virus core antigen (HCVcAg) in clinical samples. dTTPs, 2'-deoxythymidine 5'-triphosphate.

An intermolecular hydrogen-bond-induced quench-type Ru(dcbpy)32+/TPA electrochemiluminescence system by nitrogen-doped carbon quantum dots

Here, we show that nitrogen-doped carbon quantum dots (NCQDs) strongly inhibits the anodic electrochemiluminescence (ECL) signal of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine (TPA) aqueous system. To determine the ECL-quenching mechanism, we used photoluminescence spectroscopy, UV-Visible absorption spectroscopy and dynamic simulation technology. Quenching of the ECL signal of Ru(dcbpy)₃²⁺/TPA by NCQDs was predominantly attributed to the interaction between Ru(dcbpy)₃²⁺ and NCQDs rather than that between TPA and NCQDs. Specifically, when Ru(dcbpy)₃²⁺ and NCQDs were in aqueous solution together, the carboxyl (-COOH) groups of Ru(dcbpy)₃²⁺ were in contact with oxygen- and nitrogen-containing groups on the surface of NCQDs and formed intermolecular hydrogen bonds. This process involved energy transfer from the excited-state Ru(dcbpy)₃²⁺ to the intermolecular hydrogen bonds, thus resulting in a decrease in the Ru(dcbpy)₃²⁺ ECL signal. On this basis, a quenching-type ECL sensor for the quantification of NCQDs was fabricated. The sensor had a wide linear range and an estimated detection limit of 0.0012 mg mL^-1, as well as excellent stability and selectivity. Satisfactory recoveries of 97.0-99.5% were obtained using the ECL sensor to quantify NCQDs in tap water. NCQDs could potentially be used as a quenching probe of Ru(dcbpy)₃²⁺ to construct various biosensors with widespread applications in the sensing field.

Microcapillary-based multicolor assay for quantitative and sensitive point-of-care testing of proteins

A microcapillary-based multicolor assay was developed for proteins quantification in serum sample with the assistance of manual centrifugal platform. The proposed assay only required the operation of "one suction and one extrusion" to realize the target detection. Myoglobin (Myo), a biomarker in the early stage of acute myocardial infarction (AMI), was chosen as the model target. The microcapillary was first modified with polydopamine (PDA), then Myo aptamer was immobilized on the PDA modified microcapillary and hybridized with glucose oxidase (Gox) functionalized DNA probe (DNA-Gox). The step "one suction" referred to the inhalation of the sample into the functionalized microcapillary. Then the target Myo in the sample could bind to the Myo aptamer on the microcapillary so that DNA-Gox complexes were released from the microcapillary into solution. Through the step "one extrusion", the DNA-Gox complexes in the solution could catalyze glucose to generate hydrogen peroxide, and then the etching of gold nanorods (AuNRs) was initiated, causing a color change from brown to yellow. According to the color change based on the etching of AuNRs, as low as 0.1 nM Myo was detected with naked eyes. Combined with the manual centrifugal platform, even the Myo in the serum samples could be detected without power supply. It was expected to build a universal and adaptable sensing platform for different targets more quickly and efficiently.