Versatile Electrochemiluminescence and Photoelectrochemical Detection of Glutathione Using Mn2+ Substitute Target by DNA-Walker-Induced Allosteric Switch and Signal Amplification

Photoelectrochemical signal polarity transition mediated by quercetin for the detection of neuron-specific enolase

A photoelectrochemical (PEC) biosensor with a wide linear detection range was developed for the sensitive detection of neuron-specific enolase (NSE), which was achieved by applying a photocurrent polarity transition strategy mediated by quercetin. The coupling reaction between Cr(VI) and quercetin drives the signal polarity from anodic to cathodic. When only quercetin is present in the test solution, photogenerated electrons are transferred to the electrode to generate anodic photocurrent. However, in the presence of the target, the signal probe released Cr(VI), which interacted with quercetin, and the electron transfer direction was changed to achieve signal polarity conversion. Meanwhile, protoporphyrin-sensitized Bi:SrTiO3 nanocubes were used as matrix photoactive materials to provide basic photocurrent. The doping of Bi element would adjust the bandgap of SrTiO3, and the organic-inorganic composite material exhibits good photostability and chemical stability that can maintain stable photoelectric properties over a long period of time. Such a novel signal polarity transition strategy greatly broadened the sensor detection to the range of 0.00007-170 ng mL-1 and obtained a relatively low detection limit (25 fg mL-1), which greatly improved the detection sensitivity and accuracy of the biosensor.

Dual-mode photoelectrochemical radar based on CdS quantum dot and Ce-MOF for detection of low-abundance disease-associated proteins

Herein, we developed a convenient and versatile dual-mode electrochemiluminescence (ECL) and photoelectrochemistry (PEC) sensing radar for the detection of Prostate-specific antigen (PSA), which has important implications for detection of low-abundance disease-associated proteins. Cerium-based metal-organic framework (Ce-MOFs) were firstly modified on the electrode, showing well ECL and PEC property. In particular, a unique multifunctional Au@CdS quantum dots (QDs) probe loaded numerous QDs and antibody was fabricated, not only displaying strong ECL and PEC signals, but also having specific recognition to PSA. After the signal probe was linked to the electrode by immune reaction, much amplified signals of ECL and PEC were generated for double-mode detection of PSA. Therefore, this work proposed a multifunctional Au@CdS QDs signal probe with excellent ECL and PEC performance, and developed an ultrasensitive photoelectric biosensing platform for dual-mode detection, which provides an effective method for health monitoring of cancer patients.

A novel electrochemiluminescence biosensor based on Ru(bpy)32+-functionalized MOF composites and cycle amplification technology of DNAzyme walker for ultrasensitive detection of kanamycin

An electrochemiluminescence (ECL) sensing platform for ultrasensitive and highly selective detection of kanamycin (KANA) was developed based on the prepared Ru(bpy)32+-functionalized MOF (Ru@MOF) composites by hydrothermal synthesis and Ag+-dependent DNAzyme. In this sensor, the stem-loop DNA (HP) with the ferrocene (Fc) was used as substrate chain to quench the ECL emission generated by the Ru@MOF. Using the specific recognition effect between KANA and the KANA aptamer (Apt) and the DNAzyme dependence on Ag+, the KANA aptamer as the pendant strand of the DNAzyme was assembled on Ru@MOF/GCE with the aptamer. When both Ag+ and KANA were present simultaneously, KANA specifically was binded to KANA aptamer as a pendant chain. Subsequently, Ag+-dependent DNAzyme walker continuously cleaved the HP chain and released the modified end of Fc to restore the ECL signal of Ru@MOF composites, thus achieving selective and ultrasensitive detection of KANA. The constructed KANA biosensor exhibits a wide detection range (30 pM to 300 μM) accompanied by a low detection limit (13.7 pM). The KANA in seawater and milk samples are determined to evalute the practical application results of the sensor. This ECL detection strategy could be used for detecting other similar analytes and has broad potential application in biological analysis.

Aptamer-Modified Homogeneous Catalysts, Heterogenous Nanoparticle Catalysts, and Photocatalysts: Functional "Nucleoapzymes", "Aptananozymes", and "Photoaptazymes"

Conjugation of aptamers to homogeneous catalysts ("nucleoapzymes"), heterogeneous nanoparticle catalysts ("aptananozymes"), and photocatalysts ("photoaptazymes") yields superior catalytic/photocatalytic hybrid nanostructures emulating functions of native enzymes and photosystems. The concentration of the substrate in proximity to the catalytic sites ("molarity effect") or spatial concentration of electron-acceptor units in spatial proximity to the photosensitizers, by aptamer-ligand complexes, leads to enhanced catalytic/photocatalytic efficacies of the hybrid nanostructures. This is exemplified by sets of "nucleoapzymes" composed of aptamers conjugated to the hemin/G-quadruplex DNAzymes or metal-ligand complexes as catalysts, catalyzing the oxidation of dopamine to aminochrome, oxygen-insertion into the Ar─H moiety of tyrosinamide and the subsequent oxidation of the catechol product into aminochrome, or the hydrolysis of esters or ATP. Also, aptananozymes consisting of aptamers conjugated to Cu2+ - or Ce4+ -ion-modified C-dots or polyadenine-stabilized Au nanoparticles acting as catalysts oxidizing dopamine or operating bioreactor biocatalytic cascades, are demonstrated. In addition, aptamers conjugated to the Ru(II)-tris-bipyridine photosensitizer or the Zn(II) protoporphyrin IX photosensitizer provide supramolecular photoaptazyme assemblies emulating native photosynthetic reaction centers. Effective photoinduced electron transfer followed by the catalyzed synthesis of NADPH or the evolution of H2 is demonstrated by the photosystems. Structure-function relationships dictate the catalytic and photocatalytic efficacies of the systems.

Flash phase engineering of MoS2 nanofilms for enhanced photoelectrochemical performance

A heterophase structure combining semiconducting 2H- and metallic 1T-MoS2 exhibits significantly enhanced photoelectrochemical performance due to the electrical coupling and synergistic effect between the phases. Therefore, site-selective effective phase engineering is crucial for the fabrication of MoS2-based photoelectrochemical devices. Here, we employed a flash phase engineering (FPE) strategy to precisely fabricate a 2H-1T heterophase structure. This technique allows simple, efficient, and precise control over the micropatterning of MoS2 nanofilms while enabling site-selective phase transition from the 1T to the 2H phase. The detection of reduced glutathione (GSH) showed an approximately 5-fold increase in sensitivity when using the electrode fabricated by FPE.

Enhancing charge transfer in a W18O49/g-C3N4 heterostructure via band structure engineering for effective SERS detection and flexible substrate applications

Chemical mechanism (CM)-related surface-enhanced Raman spectroscopy (SERS) has received tremendous interest due to its exceptional stability and excellent uniformity. Nevertheless, there remains a demand for ingenious methodologies for promoting effective charge transfer (CT) to improve SERS sensitivity further. Herein, a band structure engineered W18O49/g-C3N4 heterostructure (WCN) was first employed as a CM-based SERS substrate with remarkable enhancement and sensitivity. To investigate the Raman enhancement properties of the substrate, malachite green (MG) was employed as the Raman probe with the excitation of a 633 nm laser. The WCN substrate exhibits a Raman enhancement factor (EF) of 2.6 × 107, achieving a limit of detection (LOD) of 1.9 × 10-10 M for MG. The outstanding Raman amplification behavior can be attributed to the heterojunction-induced efficient CT process, energy band matching resonance due to minor doping with g-C3N4 serving as a band gap modifier, and improved photo-induced charge transfer (PICT) efficiency via the oxygen vacancies in the W18O49 units. Additionally, a flexible SERS substrate based on WCN was constructed using a vacuum filtration method and utilized to detect prohibited pharmaceutical residues on fish skin. The integration of this WCN and a nylon membrane not only preserves the Raman activity of the WCN for sensitive detection but also endows the Raman substrate with high flexibility and good mechanical durability, making it a potential candidate for in situ detection in particular environments.

A Direct-Contact Photocurrent-Direction-Switching Biosensing Platform Based on In Situ Formation of CN QDs/TiO2 Nanodiscs and Double-Supported 3D DNA Walking Amplification

Herein, a direct-contact photocurrent-direction-switching photoelectrochemical (PEC) biosensing platform for the ultrasensitive and selective detection of soluble CD146 (sCD146) is reported for the first time via in situ formation of carbon nitride quantum dots (CN QDs)/titanium dioxide (TiO2 ) nanodiscs with the double-supported 3D DNA walking amplification. In this platform, metal organic frameworks (MOFs)-derived porous TiO2 nanodiscs exhibit excellent anodic photocurrent, whereas a single-stranded auxiliary DNA (ssDNA) as biogate is absorbed onto the TiO2 nanodiscs to block active sites. Subsequently, with the help of intermediate DNAs from target sCD146-induced double-supported 3D DNA walking signal amplification, the ssDNA can leave away from the surface of TiO2 nanodiscs due to the specific hybridization with intermediate DNAs. Afterward, the successful direct contact of CN QDs on TiO2 nanodiscs by porosity and electrostatic adsorption, leads to the effective photocurrent-direction switching from anodic to cathodic photocurrent. Based on direct-contact photocurrent-direction-switching CN QDs/TiO2 nanodiscs system and double-supported 3D DNA walking signal amplification, sCD146 is detected sensitively with a wide linear range (10 fg mL-1 to 5 ng mL-1 ) and a low limit of detection (2.1 fg mL-1 ). Also, the environmentally friendly and direct-contact photocurrent-direction-switching PEC biosensor has an application prospect for cancer biomarker detection.

A novel DNA-quantum dot nanostructure electrochemiluminescence aptamer sensor by chain reaction amplification for rapid detection of trace Cd2

This work proposes a new enzyme-free electrochemiluminescence (ECL) sensing platform based on a novel DNA-quantum dot (QD) nanostructure and hybridization chain reaction (HCR) amplification for the trace detection of Cd2+. First, the Cd2+ aptamer triggers the HCR amplification circuit, so abundant biotin-labeled DNAs are introduced to the electrode, and then biotin as a linker specifically captures a large number of streptavidin (SA)-CdS QD complexes, showing very high ECL signals. After the present Cd2+ binds to its aptamer on the electrode, it causes the linear DNA structure loaded with a large number of QDs to break away from the electrode, resulting in a significantly decreased ECL response. This method combines the HCR-amplified DNA structure-QD signal with the specificity of the biotin-avidin reaction, enabling the rapid detection of Cd2+ in complex water. Therefore, this sensor provides a novel and competitive strategy for detecting heavy metal ions in actual samples, which extends its application to practical settings, such as environmental monitoring and biomedical diagnostics.

A multifunctional electrochemiluminescence and photoelectrochemical biosensor based on a quantum dot ion-exchange reaction for two-channel detection of thrombin

Herein, a multifunctional electrochemiluminescence (ECL) and photoelectrochemical (PEC) biosensor based on exchange of Ag+ with CdTe QDs was developed for dual-mode detection of thrombin. First, CdTe QDs assembled on an electrode displayed superior ECL and PEC signals. At the same time, C-rich hairpin (HP) DNA linked to silicon spheres loaded a large amount of Ag+, and the specific binding of thrombin to an aptamer led to the release of DNA P; then, DNA P interacted with HP DNA to produce numerous Ag+ ions by an enzyme-digestion amplification reaction. Ag+ underwent ion exchange with CdTe QDs to generate AgTe/CdTe QDs, resulting in much reversed PEC and changed ECL signals for dual-mode detection of thrombin. This work takes advantage of outstanding multi-signals of QDs coupled with convenient ion exchange to achieve multi-mode detection of the target, avoiding false positive or false negative signals generated in the traditional detection process, and thus can be used for the rapid detection of various biomolecules in actual samples.

RNA-Cleaving DNAzyme-Based Amplification Strategies for Biosensing and Therapy

Since their first discovery in 1994, DNAzymes have been extensively applied in biosensing and therapy that act as recognition elements and signal generators with the outstanding properties of good stability, simple synthesis, and high sensitivity. One subset, RNA-cleaving DNAzymes, is widely employed for diverse applications, including as reporters capable of transmitting detectable signals. In this review, the recent advances of RNA-cleaving DNAzyme-based amplification strategies in scaled-up biosensing are focused, the application in diagnosis and disease treatment are also discussed. Two major types of RNA-cleaving DNAzyme-based amplification strategies are highlighted, namely direct response amplification strategies and combinational response amplification strategies. The direct response amplification strategies refer to those based on novel designed single-stranded DNAzyme, and the combinational response amplification strategies mainly include two-part assembled DNAzyme, cascade reactions, CHA/HCR/RCA, DNA walker, CRISPR-Cas12a and aptamer. Finally, the current status of DNAzymes, the challenges, and the prospects of DNAzyme-based biosensors are presented.

A dual-channel sensor array for discrimination of biothiols based on manganese dioxide nanosheets

A dual-signal sensor array for highly sensitive identification of biothiols is reported based on different optical responses of MnO₂/curcumin (CUR) system to different biothiols. The addition of MnO₂ nanosheets (MnO₂ NSs) quenches the fluorescence of CUR, and the color of the mixture changes from yellow to brown. In the presence of reductive biothiols, MnO₂ NSs are etched and lose their fluorescence quenching ability, resulting in an increase in the fluorescence intensity of CUR at 540 nm and a decrease in the absorbance at 430 nm. The sensor array generates specific response modes based on the varying reduction abilities of different biothiols, which can be distinguished by linear discriminant analysis (LDA). The sensor array successfully distinguished five biothiols (glutathione (GSH), dithiothreitol (DTT), cysteine (Cys), mercaptoethanol (ME), and homocysteine (Hcy)) across a wide concentration range (1 μM-100 μM) and biothiol mixtures with varing molar ratios.

Sb-doped FeOCl nanozyme-based biosensor for highly sensitive colorimetric detection of glutathione

Nanozymes have been emerging as substitutes for natural enzymes to construct biosensors towards biomolecular detection. However, the detection of glutathione (GSH) by nanozyme-based biosensors still remains a great challenge for research on catalytic activity enhancement and the detection mechanism. In this work, Sb-doped iron oxychloride (Sb-FeOCl) with a well-defined nanorod-like structure is prepared by high-temperature calcination. Sb-FeOCl nanorods have high peroxidase-like activity, which can catalyze the decomposition of H₂O₂ into ·OH and then oxidize 3,3',5,5'-tetramethylbenzidine (TMB). In view of these intriguing observations, a reliable colorimetric method with a simple mixing and detection strategy is developed for the detection of GSH. The linear range of GSH detection is 1-36 μM. The detection limit of GSH reaches a low level of 0.495 μM (3σ/slope). The GSH sensing system also exhibits excellent specificity and anti-interference. Taking advantage of the advantages of the Sb-FeOCl nanorod-based biosensor, it can be used to quantitatively detect GSH levels in human serum. It can be anticipated that the Sb-FeOCl nanorods have broad prospects in the field of enzymatic biochemical reactions.

Construction and Application of DNAzyme-based Nanodevices

The development of stimuli-responsive nanodevices with high efficiency and specificity is very important in biosensing, drug delivery, and so on. DNAzymes are a class of DNA molecules with the specific catalytic activity. Owing to their unique catalytic activity and easy design and synthesis, the construction and application of DNAzymes-based nanodevices have attracted much attention in recent years. In this review, the classification and properties of DNAzyme are first introduced. The construction of several common kinds of DNAzyme-based nanodevices, such as DNA motors, signal amplifiers, and logic gates, is then systematically summarized. We also introduce the application of DNAzyme-based nanodevices in sensing and therapeutic fields. In addition, current limitations and future directions are discussed.

In-situ formation of MnO2 nanoparticles on Ru@SiO2 nanospheres as a fluorescent probe for sensitive and rapid detection of glutathione

Glutathione (GSH)-switched fluorescent assays have appealed much attention due to rapid signal changes of fluorescent probes. However, exposure to exterior environment of fluorescent probe causes photobleaching and premature leakage, leading to low sensitivity and poor photostability. Herein, luminescent SiO₂ nanoparticles encapsulated with Ru(bpy)₃²⁺ (Ru@SiO₂) were designed and synthesized as fluorescent probe to construct a GSH-switched fluorescent assay. The encapsulation of Ru(bpy)₃²⁺ in the SiO₂ nanoparticles could effectively prevent the leakage of Ru(bpy)₃²⁺ molecules, improving the photostability of probe. The fluorescence of Ru@SiO₂ nanoparticles was quenched by coating MnO₂ nanoparticles on Ru@SiO₂ surface (Ru@SiO₂@MnO₂ nanocomposites) through an in situ growth approach, which reduced background of the assay. The MnO₂ nanoparticles not only further inhibited the leakage of Ru(bpy)₃²⁺ molecules, but also could serve as a recognition unit of GSH. In the presence of GSH, the MnO₂ nanoparticles on the surface of Ru@SiO₂ nanoparticles were reduced to Mn²⁺, resulting the fluorescence recovery of Ru@SiO₂ nanoparticles. Thus, a signal-on fluorescent strategy was constructed for GSH detection. The assay displayed good analytical performance for GSH detection with a low detection limit of 16.2 nM due to excellent fluorescence quenching ability of MnO₂ nanoparticles and special role of Ru@SiO₂ nanoparticles to block probe leakage. The proposed assay was also applied to measure GSH levels in human serum samples. This work paves a new way to detect GSH with high sensitivity.

MnO2 nanosheet-mediated generalist probe: Cancer-targeted dual-microRNAs detection and enhanced CDT/PDT synergistic therapy

While integrated nanoplatform for diagnosis and therapy has received much recent interest, its widespread application has been hampered by the complicated preparation process, high-cost and low-efficacy. Herein, we designed a MnO₂ nanosheet-mediated generalist probe (MNSGP), for intracellular dual-microRNAs (miRNAs) imaging and enhanced synergistic therapy of chemodynamic therapy (CDT) and photodynamic therapy (PDT). Because MNSGP can specifically target nucleolin receptor overexpressed on the cancer cell surface, it can be internalized via a receptor-mediated endocytosis pathway. After entering the cells, MnO₂ NS was degraded to Mn²⁺ by the excessive glutathione (GSH), releasing the DNA probes for cyclic amplification detection of miR-155 and miR-21 based on toehold-mediated strand displacement amplification (TSDA). Meanwhile, the produced O₂ by MnO₂ NS catalysis can promote the photosensitizer TMPyP4 to produce singlet oxygen (¹O₂) for PDT. The degraded Mn²⁺, as Fenton reagent, can convert endogenous H₂O₂ to cytotoxic hydroxyl radical (·OH) for CDT. In addition, the depletion of GSH impairs the antioxidant defense system (ADS), enhancing the CDT/PDT synergistic effect. The prepared generalist probe was fully characterized. Accuracy of dual-miRNAs detection and the high curative effect of enhanced CDT/PDT synergistic therapy were attested via in vitro and in vivo experiments. Unarguably, MNSGP broadens new horizons in the design of nucleic acid nanoplatform, cancer-targeted detection and theranostic application.

Split aptamer remodeling-initiated target-self-service 3D-DNA walker for ultrasensitive detection of 17β-estradiol

DNA walker machines, as one of the dynamic DNA nanodevices, have attracted extensive interest in the field of analysis due to their inherent superiority. Herein, we reported a split aptamer remodeling-initiated target-self-service 3D-DNA walker for ultrasensitive, specific, and high-signal-background ratio determination of 17β-estradiol (E2) in food samples. Two split probes (STWS-a and STWS-b) were rationally designed that can undergo structural reassembled to serve as walking strands (STWS) under the induction of the target. Meanwhile, an intact E6-DNAzyme region was formed and activated at the tail of STWS. The activated E6-DNAzyme then continuously drives the 3D-DNA walker for signal amplification and specific detection of E2. Under optimal conditions, the proposed DNA walker-based biosensor exhibited excellent linearity in the range of 1 pM to 50 nM with a low limit of detection (LOD) of 0.28 pM, and good precision (2.7%) for 11 replicate determinations of 1 nM of E2. Furthermore, the developed DNA walker-based biosensor achieved excellent sensitive analysis of E2 in the complex food matrix with recoveries of 95.6-106.5%. This newly proposed split aptamer-based strategy has the advantages of ultrasensitive, high signal-to-background ratio, and high stability. Noteworthy, the successful operation of the DNA walker initiated by the split aptamer expands the principles of DNA walker design and provides a universal signal amplification platform for trace analysis.

CRISPR-Cas12a based fluorescence assay for organophosphorus pesticides in agricultural products

Herein, we propose a sensitive fluorescent assay for organophosphorus pesticides (OPs) detection based on a novel strategy of activating the CRISPR-Cas12a system. Specifically, acetylcholinesterase (AChE) hydrolyzes acetylthiocholine into thiocholine (TCh). Subsequently, TCh induces the degradation of MnO₂ nanosheets and generates sufficient Mn²⁺ ions to activate the Mn²⁺-dependent DNAzyme. Then, as the catalytic product of activated DNAzyme, the short DNA strand activates the CRISPR-Cas12a system to cleave the fluorophore-quencher-labeled DNA reporter (FQ) probe effectively; thus, increasing the fluorescence intensity (FI) in the solution. However, in the presence of OPs, the activity of AChE is suppressed, resulting in a decrease in FI. Under optimized conditions, the limits of detection for paraoxon, dichlorvos, and demeton were 270, 406, and 218 pg/mL, respectively. Benefiting from the outstanding MnO₂ nanosheets properties and three rounds of enzymatic signal amplification, the proposed fluorescence assay holds great potential for the detection of OPs in agricultural products.

A glucose/O2 biofuel cell integrated with an exonuclease-powered DNA walker for self-powered sensing of microRNA

With the aid of an exonuclease-powered DNA walker, the amount of glucose oxidase immobilized on the bioanode can be facilely tailored by varying the concentration of microRNA-141, so a glucose/O₂ biofuel cell is employed as a self-powered sensor for sensitive and selective detection of microRNA-141.

In situ synthesis of chiral AuNCs with aggregation-induced emission using glutathione and ceria precursor nanosheets for glutathione biosensing

Au(i)–SG/Ce(CO3)2 NS conjugated nanoprobe was developed for selective GSH detection. The redox reaction between GSH and the NS could release Ce3+ ions to initiate the intense AIE of Au(i)–SG oligomers.

Recent Advances of Nanostructured Materials for Photoelectrochemical Bioanalysis

Nowadays, the emerging photoelectrochemical (PEC) bioanalysis has drawn intensive interest due to its numerous merits. As one of its core elements, functional nanostructured materials play a crucial role during the construction of PEC biosensors, which can not only be employed as transducers but also act as signal probes. Although both chemical composition and morphology control of nanostructured materials contribute to the excellent analytical performance of PEC bioassay, surveys addressing nanostructures with different dimensionality have rarely been reported. In this review, according to classification based on dimensionality, zero-dimensional, one-dimensional, two-dimensional, and three-dimensional nanostructures used in PEC bioanalysis are evaluated, with an emphasis on the effect of morphology on the detection performances. Furthermore, using the illustration of recent works, related novel PEC biosensing patterns with promising applications are also discussed. Finally, the current challenges and some future perspectives in this field are addressed based on our opinions.

Au-quantum dot nanocluster electrochemiluminescence coupled with cycling-amplification for sensitive microRNA detection

A novel polyamidoamine (PAMAM) dendrimer-Au nanocluster composite was synthesized, and used to fabricate a new amplified electrochemiluminescence (ECL) signal probe for sensitive detection of microRNA by multiple strand displacement amplification (SDA) strategy. The as prepared PAMAM-Au nanocluster with many amino groups could assemble a large number of quantum dots (QDs) to greatly amplify ECL of the probe. In addition, a new sliver nanocluster (NC) with excellent conductivity and many reactive carboxyl groups was prepared, and used to immobilize a large amount of capture (c1) DNA molecules on the electrode. Moreover, by using bifunctional DNA strand displacement reaction-mediated multiple cycling-amplification technique, a small number of target miRNA could induce to generate abundant DNA (t1) fragments, which was used as a linker to hybridize with c1 DNA on the electrode, and then conjugate many amplified QDs probe. Thus an amplified ECL analytical method for detecting target miRNA was designed, and highly sensitive detection of miRNA was achieved. This newly established strategy paves a new way for homogeneous microRNA detection, which hold great potential for application in early clinical diagnosis.

Methylene blue embedded duplex DNA as an efficient signal stimulator of petal-like BiVO4 for ultrasensitive photoelectrochemical bioassay

Conventionally, the photoelectrochemistry relies on freely diffusive signal molecules in solution to stimulate the photocurrent output, leading to limited sensing strategies. Herein, we showcase the methylene blue (MB) embedded duplex DNA for efficient signal stimuli and its application for ultrasensitive photoelectrochemical (PEC) bioassay. Specifically, the MB embedded duplex DNA scavenged the photogenerated holes of petal-like BiVO₄ efficiently, and thus greatly augmented the anodic photocurrent output. Taking the miRNA-21 as a model target, whose biorecognition reaction was aided by the rolling circle amplification (RCA) reaction to finally produce an amplified amount of double-stranded DNA (dsDNA) with embedded MB on the photoelectrode's surface, a "label-free" and "signal-on" PEC biosensing platform was implemented with ultra-sensitivity and high selectivity. The proposed strategy could detect miRNA-21 in the concentration range of 5.0 fM to 10 nM, with the detection limit as low as 0.3 fM. This work opens up the utilization of redox substance intercalated duplex DNA for an efficient signal stimulator, which hints the prospect of other more intercalators embedded DNA for versatile biosensing purposes. Importantly, considering the large quantities of bioreactions that involve duplex DNA as reactants/products, the developed signal transduction strategy may further find wide applications in bioanalysis for targeting more analytes.

Smart Catalyzed Hairpin Assembly-Induced DNAzyme Nanosystem for Intracellular UDG Imaging

Uracil DNA glycosylase (UDG) is one of the key initiators for the base excision repair pathway. Since abnormal UDG expression is associated with various diseases, sensitive detection of UDG activity is critical for early clinical diagnosis. Here, a smart catalyzed hairpin assembly (CHA)-DNAzyme nanosystem is developed for intracellular UDG imaging by incorporating CHA and DNAzyme onto MnO₂ nanosheets. In this strategy, the biodegradable MnO₂ nanosheets are employed as nanocarriers for efficiently adsorbing and delivering five DNA probes into cells by endocytosis. Then, the MnO₂ nanosheets are degraded by cellular glutathione to release the DNA modules at the same intracellular position. Liberated Mn²⁺, an indispensable DNAzyme cofactor, was used to promote catalytic cleavage for facilitating the cascade process in cells. Based on the uracil site-recognition and -excision operation of the target UDG, the activated CHA-DNAzyme nanosystem generates lots of DNAzyme-assisted CHA products, turning on the fluorescence resonance energy transfer response. This autocatalytic CHA-DNAzyme nanosystem provides a detectable minimum UDG concentration of 0.23 mU/mL, which is comparable to some reported UDG detection approaches. As a multiple signal amplification strategy, the CHA-DNAzyme nanosystem realizes the UDG imaging in living cells with enhanced sensitivity, indicating great promise in the prediction and diagnosis of early-stage cancer.

A DNAzyme-Based Dual-Stimuli Responsive Electrochemiluminescence Resonance Energy Transfer Platform for Ultrasensitive Anatoxin-a Detection

An effective and precise electrochemiluminescence resonance energy transfer (ECL-RET), including the efficient regulation over the proximity of a donor and an acceptor and the reliable stimuli responsive as well as the avoidance of undesirable probes leakage, etc., is significant for the development of an accurate and sensitive ECL detection method; yet, the current literature in documentation involves only a limited range of such ECL-RET systems. Herein, we propose an ECL-RET strategy with dually quenched ultralow background signals and a dual-stimuli responsive, accurate signal output for the ultrasensitive and reliable detection of anatoxin-a (ATX-a). The dual quenching is accomplished by an integrated ECL-RET probe of metal organic frameworks (MOFs) encapsulated into Ru(bpy)₃²⁺ (Ru-MOF) (donor) coated with silver nanoparticles (AgNPs) shell (acceptor 1) and close proximity with DNA-ferrocene (Fc) (acceptor 2). Multistimuli responsive DNAzyme facilitated the accurate signal switch by both target ATX-a and hydrogen peroxide (H₂O₂). Because of the specific recognition of the aptamer toward ATX-a, an intricate design of the DNA sequence enabled the exposure of the Ag⁺-dependent DNAzyme sequence and H₂O₂ in situ generated Ag⁺ triggering a catalytic cleavage reaction to freely release the two ECL-RET energy acceptors, thus switching the ECL signal significantly and achieving ultrasensitive detection. It is noteworthy that AgNPs are key in this ECL-RET strategy, serving both as the gate-keepers for avoiding ECL probes leakage and also the ECL energy acceptors, and mostly importantly serving as the redox substrate for the subsequent DNAzyme catalytic signal switch. The proposed ECL-RET aptasensor for ATX-a detection displayed splendid monitoring performance with a quite low detection limit of 0.00034 mg mL^-1. This sensor not only led to the development of a dual-quenching ECL-RET system but also provided meaningful multistimuli responsive ECL biosensing platform construction, which shows a promising application prospect in complicated sample analysis.

High-Efficient Electrochemiluminescence of Au Nanoclusters Induced by the Electrosensitizer Cu2O: The Mechanism Insights from the Electrogenerated Process

Herein, a novel Au nanoclusters/Cu₂O (Au NCs/Cu₂O) heterostructure exhibited exceptionally strong electrochemiluminescence (ECL) emission, in which the p-type semiconductor Cu₂O was defined as the electrosensitizer to provide the electrogenerated holes for rapidly transferring the electrogenerated hot electrons of Au NCs. Thus, the fast charge transfer of Au NCs/Cu₂O was achieved by the electrosensitizer compared to the sluggish one via intramolecular covalent bond charge transfer of traditional Au NCs, resulting in a greatly higher ECL efficiency (63.8%) than that of pure Au NCs (2.7%) versus the standard [Ru(bpy)₃]²⁺. It solved one main challenge of electrochemiluminophore-based metal NCs: high efficiency with energic charge-transport kinetics. As a proof of concept, Au NCs/Cu₂O was successfully employed in an ultrasensitive ECL biosensing platform for determining the biological antioxidant glutathione with a limit of detection (LOD) as low as 6.3 pM. The heterostructure as an ECL emitter is a very promising start for guiding the rational design of efficient electrochemiluminophores in intense light-emitting devices and high-definition ECL imaging.

CDs-MnO2-TPPS Ternary System for Ratiometric Fluorescence Detection of Ascorbic Acid and Alkaline Phosphatase

Manganese dioxide (MnO₂) nanosheet-based fluorescence sensors often use oxidase-like activity or wide absorption spectrum for detection of antioxidants. In those strategies, MnO₂ nanosheets were reduced to Mn²⁺ by antioxidants. However, few strategies emphasize the role of Mn²⁺ obtained from MnO₂ reduction in the design of the fluorescence sensor. Herein, we expanded the application of a MnO₂ nanosheet-based fluorescence sensor by involving Mn²⁺ in the detection process using ascorbic acid (AA) as a model target. In this strategy, carbon dots (CDs), MnO₂ nanosheets, and tetraphenylporphyrin tetrasulfonic acid (TPPS) comprise a ternary system for ratiometric fluorescence detection of AA. Initially, CDs were quenched by MnO₂ nanosheets based on the inner filter effect, while TPPS maintained its fluorescence intensity. After the addition of AA, MnO₂ nanosheets were reduced to Mn²⁺ so that the fluorescence intensity of CDs was recovered and TTPS was quenched by coordination with Mn²⁺. Overall, AA triggered an emission intensity increase at 440 nm for CDs and a decrease at 640 nm for TPPS. The ratio intensity of CDs to TPPS (F ₄₄₀/F ₆₄₀) showed a good linear relationship from 0.5 to 40 μM, with a low detection limit of 0.13 μM for AA detection. By means of the alkaline phosphatase (ALP)-triggered generation of AA, this strategy can be applied for the detection of ALP in the range of 0.1-100 mU/mL, with a detection limit of 0.04 mU/mL. Furthermore, this sensor was applied to detect AA and ALP in real, complex samples with ideal recovery. This novel platform extended the application of MnO₂ nanosheet-based fluorescence sensors.

A dual-model "on-super off" photoelectrochemical/ratiometric electrochemical biosensor for ultrasensitive and accurate detection of microRNA-224

A dual-model "on-super off" photoelectrochemical (PEC)/ratiometric electrochemical (EC) biosensor based on signal enhancing and quenching combining three-dimensional (3D) DNA walker strategy was designed for the ultrasensitive and accurate detection of microRNA-224 (miRNA-224). The "signal on" PEC state was achieved by methylene blue labeled hairpin DNA (MB-DNA) for sensitizing CdS QDs. Then numerous transformational ferrocene labeled DNAs (Fc-DNAs) converted by target-induced 3D DNA walker amplification with the help of Ag nanocubes (NCs) label DNA (Ag-DNA) were introduced to open hairpin MB-DNA. Such configuration change would relocate the sensitizer MB and the quencher Fc, whereas energy transfer placed between Ag NCs and CdS QDs, thereby significantly quenching the PEC signal to obtain "super off" state. Meanwhile, these changes resulted in a decreased oxidation peak current of MB (I_MB) and an increased that of Fc (I_Fc). MiRNA-224 was also detected on basis of the dual-signaling EC ratiometric method for complementary PEC detection. Benefiting from different mechanisms and relatively independent signal transduction, this approach not only avoided interference from difficult assembly but also outstandingly increased sensitivity by distance-controllable signal enhancing and quenching strategies. As a result, the detection ranges of 0.1-1000 fM with a low detection limit of 0.019 fM for PEC, and 0.52 to 500 fM with a low detection limit of 0.061 fM for EC, were obtained for miRNA-224, which opens a new avenue for designing numerous elegant biosensors with potential utility in bioanalysis and early disease diagnosis.

Recent advances in DNA walker machines and their applications coupled with signal amplification strategies: A critical review

DNA walkers, a type of dynamic nanomachines, have become the subject of burgeoning research in the field of biology. These walkers are powered by driving forces based on strand displacement reactions, protein enzyme/DNAzyme reactions and conformational transitions. With the unique properties of high directionality, flexibility and efficiency, DNA walkers move progressively and autonomously along multiple dimensional tracks, offering abundant and promising applications in biosensing, material assembly and synthesis, and early cancer diagnosis. Notably, DNA walkers identified as signal amplifiers can be combined with various amplification approaches to enhance signal transduction and amplify biosensor sensing signals. Herein, we systematically and comprehensively review the walking principles of various DNA walkers and the recent progress on multiple dimensional tracks by presenting representative examples and an insightful discussion. We also summarized and categorized the diverse signal amplification strategies with which DNA walkers have coupled. Finally, we outline the challenges and future trends of DNA walker machines in emerging analytical fields.

Photoinduced-electron transfer coupled with DNA cross-chain displacement multiple amplification for fluorescence biosensing of MicroRNA

In this work, a new fluorescence biosensor platform based on distance-dependent photoinduced-electron transfer (PET) coupled with target cross-chain displacement cyclic amplification strategy was developed to detect MicroRNA. The DNA cross structure was cleverly designed to protect restriction site, then multiple amplification reactions of target cycle and chain replacement based on DNA cross-configuration were carried out in the presence of primer, polymerase and cutting enzyme, thus a large number of single-stranded (ss) DNA products (S1 and S2) can be exported by inputting a small amount of target miRNA. The fluorescent AgNCs/DNA probe was synthesized based on high affinity of Ag to cytosine (C) rich in ssDNA acting as electron donor, and guanine (G) rich ssDNA can form G-quadruplex complex acting as electron receptor to induce PET process. S1 and S2 hybridized with flexible single-stranded DNA COM 1 and Com 2, forming rigid double-stranded DNA to inhibit fluorescence quenching PET process, so the corresponding fluorescence was recovered. Thus the miRNA-induced amplified products can specifically result in fluorescence changes by PET, and the changes increase with increasing miRNA concentration. Therefore, the proposed fluorescent biosensor can be applied to quantitative determination of miRNA-182-5p, which has great potential in early clinical diagnosis of miRNAs related diseases.

Autonomous operation of 3D DNA walkers in living cells for microRNA imaging

Three dimensional (3D) DNA walkers hold great potential in serving as an ideal candidate for signal transduction and amplification in bio-assays. However, the autonomous operation of 3D DNA walkers inside living cells is still few and far between, which could be attributed to the lack of suitable driving forces and moderate efficiency in terms of the cellular uptake of such complex 3D DNA components. Herein, a newly updated autonomously operated and highly integrated 3D DNA walker on Au nanoparticles (Au NPs)/zeolitic imidazolate framework-8 (ZIF-8) was activated in a tumor microenviroment and its signal amplified assay capability in living cells was demonstrated using miRNA as a sensing model biomolecule. Specifically, we assembled a 3D DNA motor, including Zn2+-dependent DNAzyme and substrates on the AuNPs grafted on ZIF-8. After being delivered into a living cell, ZIF-8 was efficiently degraded in the tumor microenvironment (low pH value), locally releasing the Zn2+ and DNA motor. Then, a self-sufficient DNA motor autonomously performed the bio-analytical task of imaging miRNA-10b, with a low detection limit of 34 pM. Also, such self-sufficient 3D walkers allowed real-time imaging of MDA-MB-231 cells by intracellular operation. This method demonstrates the self-sufficient 3D DNA motor's bioanalytical application in living cells which may inspire various other biological applications including gene delivery, therapy, etc.

Progress in electrochemiluminescence of nanoclusters: how to improve the quantum yield of nanoclusters

Classification of nanoclusters and methods to improve their quantum yield and applications.

Dual-Modular Aptasensor for Detection of Cardiac Troponin I Based on Mesoporous Silica Films by Electrochemiluminescence/Electrochemical Impedance Spectroscopy

A simple, dual-modular aptasensor for accurate determination of cardiac troponin I (cTnI), a sensitive biomarker of acute myocardial infarction, is reported. It has the parallel output of electrochemiluminescence (ECL) and electrochemical impedance spectroscopy (EIS) based on target-gated transportation of signal probes (luminol/H₂O₂ or Fe(CN)₆^3-/4-). The sensing capacity is originated from the amino-functionalized mouth margin of the nanochannels in a vertically oriented mesoporous silica film, which was in situ-grown on indium tin oxide-coated glass. With the linkage of glutaraldehyde to couple the aptamer as a trapper, it brings in the high specific target-gated response toward cTnI as decreased ECL or increased EIS. The concentration of cTnI is measurable by the ECL response within a wide linear range from 0.05 pg mL^-1 to 10 ng mL^-1, as well as the EIS response for a linear range between 0.05 pg mL^-1 and 1 ng mL^-1. Significantly, the self-verification of these two data from ECL and EIS validated each other with a satisfactory linear correlation (R² = 0.999), thereby realizing the more reliable and accurate quantification to avoid false results. The designed strategy is an effective method for detection of cTnI, which is of great potential to apply in clinical detection.

An electrochemiluminescence biosensor for p53 antibody based on Zn-MOF/GO nanocomposite and Ag+-DNA amplification

An ultrasensitive electrochemiluminescence biosensor was established based on the Zn-MOF/GO nanocomposite. Ag(I)-embedded DNA complexes were used as a signal amplification reagent. In this work, 5,10,15,20-tetrakis(4-carboxyphenyl)porphyrin (TCPP) and Zn²⁺ were integrated into a porphyrin paddlewheel framework (Zn-MOF) by a hydrothermal method. The synthesized Zn-MOF material has electrochemiluminescence property, and the luminescence intensity is improved after being composited with graphene oxide (GO). Based on the composite material, we constructed an ultrasensitive ECL biosensor for the p53 antibody detection. The composite material acted as an admirable substrate and then loaded plenty of p53 antigens to recognize the target (p53 antibody) accurately. Because of the bridging effect of streptavidin and biotin-conjugated goat anti-rabbit IgG (bio-ab2), the rich-C DNA with positive correlation with the target was modified on the electrode and then captured the co-reactant accelerator Ag⁺ to amplify the signal. Therefore, the ECL biosensor response increases with increasing p53 antibody concentration. In the range 0.1 fg/mL-0.01 ng/mL, the response signal of the biosensor has a good linear relationship with the p53 antibody concentration. The detection limit is 0.03 fg/mL (S/N = 3). Impressively, the biosensor not only featured high sensitivity, good stability, and excellent specificity for the detection of p53 antibody, but also provides a new way for early detection of cancer. Graphical abstract Schematic representation of the electrochemiluminescence sensor based on a Zn-MOF/GO nanocomposite, which can be applied to the determination of p53 antibody.

A near-infrared light-controlled, ultrasensitive one-step photoelectrochemical detection of dual cell apoptosis indicators in living cancer cells

The proposed near-infrared (NIR) light-controlled, one-step photoelectrochemical (PEC) strategy could simultaneously detect cell apoptosis indicators, phosphatidylserine (Pho) and sodium potassium adenosine triphosphatase (Sat), on living cancer cells.