Integration of Enzymatic Labeling with Single-Molecule Detection for Sensitive Quantification of Diverse DNA Damages

Elongation and Ligation-Mediated Differential Coding for Label-Free and Locus-Specific Analysis of 8-Oxo-7,8-dihydroguanine in DNA

Oxidative DNA damage is closely associated with the occurrence of numerous human diseases and cancers. 8-Oxo-7,8-dihydroguanine (8-oxoG) is the most prevalent form of DNA damage, and it has become not only an oxidative stress biomarker but also a new epigenetic-like biomarker. However, few approaches are available for the locus-specific detection of 8-oxoG because of the low abundance of 8-oxoG damage in DNA and the limited sensitivity of existing assays. Herein, we demonstrate the elongation and ligation-mediated differential coding for label-free and locus-specific analysis of 8-oxoG in DNA. This assay is very simple without the involvement of any specific labeled probes, complicated steps, and large sample consumption. The utilization of Bsu DNA polymerase can specifically initiate a single-base extension reaction to incorporate dATP into the opposite position of 8-oxoG, endowing this assay with excellent selectivity. The introduction of cascade amplification reaction significantly enhances the sensitivity. The proposed method can monitor 8-oxoG with a limit of detection of 8.21 × 10-19 M (0.82 aM), and it can identify as low as 0.001% 8-oxoG damage from a complex mixture with excessive undamaged DNAs. This method can be further applied to measure 8-oxoG levels in the genomic DNA of human cells under diverse oxidative stress, holding prospect potential in the dynamic monitoring of critical 8-oxoG sites, early clinical diagnosis, and gene damage-related biomedical research.

Colorimetric Detection of DNase Type I 3'OH DNA Ends Using an Isothermal Amplification-Assisted Paper-Based Analytical Device

The generation of DNase type I 3'OH DNA ends is closely related to the harm of endogenous reactive oxygen species (ROS) and environmental genotoxic agents. The evaluation of this type of DNA damage plays an important role in clinical intervention and environmental toxicity assessment. Terminal deoxynucleotidyl transferase (TdT)-assisted isothermal amplification (TAIA) offers a facile and versatile way to detect DNase type I 3'OH DNA ends. Its ability of templated-independent isothermal amplification is one unique feature. Here, we reported a paper-based analytical device (PAD) coupled with a smartphone for the detection of DNase type I 3'OH DNA ends using TAIA and colorimetric signal readout. We achieved the integration of cell lysis, DNA extraction, TAIA, horseradish peroxidase (HRP)-enabled colorimetric reaction, and signal readout. This device could achieve a limit of detection of 264 cells with a total assay time of less than 45 min. By combining PAD with a smartphone, the integrated platform could be used for the visual and quantitative analysis of DNA damages with the advantages of ease-to-use, fast response, inexpensive, and instrument free. Furthermore, successful assessment of the genotoxicity in wastewater effluents suggested the great promise of the integrated platform for on-site testing in practical applications.

Construction of Bioluminescent Sensors for Label-Free, Template-Free, Separation-Free, and Sequence-Independent Detection of both Clustered and Isolated Damage in Genomic DNA

DNA damage induced by endogenous/exogenous factors may cause various diseases, and the genomic DNA damage has become an important biomarker for clinical diagnosis and risk assessment, but it remains a great challenge to accurately quantify both clustered and isolated damage because of their random locations, large diversity, and low abundance. Herein, we demonstrate the development of bioluminescent sensors for label-free, template-free, separation-free, and sequence-independent detection of both clustered and isolated damage in genomic DNA based on the base-excision repair (BER) pathway and terminal transferase (TdT)-initiated template-free isothermal cyclic amplification. The damaged bases are cleaved by DNA glycosylase to generate a new 3'-OH terminus, and subsequently, TdT catalyzes the repeated incorporation of dTTPs into the 3'-OH terminus to produce poly-T structures which can hybridize with the signal probe to form a poly-T sequence/signal probe duplex. Under the lambda exonuclease hydrolysis, a large number of adenosine monophosphate (AMP) molecules are produced to generate a high bioluminescence signal through the cyclic interconversion of AMP-adenosine triphosphate (ATP)-AMP in the presence of luciferin and firefly luciferase. Moreover, the introduction of APE1-induced cyclic cleavage signal amplification can greatly improve the detection sensitivity. The proposed strategy can detect both clustered and isolated damage in genomic DNA with extremely high sensitivity and excellent specificity, and it can even distinguish 0.001% DNA damage in the mixture. Importantly, it can detect the cellular DNA damage with a detection limit of 0.011 ng and further extend to measure various DNA damage with the integration of appropriate DNA repair enzymes.

Sensitive Electrochemical Biosensor for Rapid Screening of Tumor Biomarker TP53 Gene Mutation Hotspot

Rapid and sensitive detection of cancer biomarkers is crucial for cancer screening, early detection, and improving patient survival rate. The present study proposes an electrochemical gene-sensor capable of detecting tumor related TP53 gene mutation hotspots by self-assembly of sulfhydryl ended hairpin DNA probes tagged with methylene blue (MB) onto a gold electrode. By performing a hybridization reaction with the target DNA sequence, the gene-sensor can rearrange the probe’s structure, resulting in significant electrochemical signal differences by differential pulse voltammetry. When the DNA biosensor is hybridized with 1 μM target DNA, the peak current response signal can decrease more than 60%, displaying high sensitivity and specificity for the TP53 gene. The biosensor achieved rapid and sensitive detection of the TP53 gene with a detection limit of 10 nmol L⁻¹, and showed good specific recognition ability for single nucleotide polymorphism (SNP) and base sequence mismatches in the TP53 gene affecting residue 248 of the P53 protein. Moreover, the biosensor demonstrated good reproducibility, repeatability, operational stability, and anti-interference ability for target DNA molecule in the complex system of 50% fetal bovine serum. The proposed biosensor provides a powerful tool for the sensitive and specific detection of TP53 gene mutation hotspot sequences and could be used in clinical samples for early diagnosis and detection of cancer.

Ag@Pyc Nanocapsules as Electrochemiluminescence Emitters for an Ultrasensitive Assay of the APE1 Activity

Herein, Ag@pyrenecarboxaldehyde nanocapsules (Ag@Pyc nanocapsules) as emitters were prepared to construct an ultrasensitive electrochemiluminescence (ECL) biosensor for the detection of the human apurinic/apyrimidinic endonuclease1 (APE1) activity. Ag nanoparticles on the surface of Pyc nanocapsules as coreaction accelerators could significantly promote coreactant peroxydisulfate (S₂O₈^2-) to generate massive reactive intermediates of sulfate radical anion (SO₄^•-), which interacted with the Pyc nanocapsules to achieve a strong ECL response. In addition, with the aid of APE1-triggered 3D DNA machine, trace target could be converted into a large number of mimic targets (MTs), which were positively correlated with the activity of APE1. Consequently, the proposed ECL biosensor realized an ultrasensitive detection of APE1 activity with an exceptional linear working range from 5 × 10^-10 to 5 × 10^-4 U·μL^-1 and a lower limit of detection of 1.36 × 10^-11 U·μL^-1. This strategy provided a new approach to construct an efficient ternary system for the detection of biomolecules and early diagnosis of diseases.

Single molecule detection; from microscopy to sensors

Single molecule detection is necessary to find out physical, chemical properties and their mechanism involved in the normal functioning of body cells. In this way, they can provide a new direction to the healthcare system. Various techniques have been developed and employed for their successful detection. Herein, we have emphasized various traditional methods as well as biosensing technology which offer single molecule sensitivity. The various methods including plasmonic resonance, nanopores, whispering gallery mode, Simoa assay and recognition tunneling are discussed in the initial part which has been followed by a discussion about biosensor-based detection. Plasmonic, SERS, CRISPR/Cas, and other types of biosensors are focused in this review and found to be highly sensitive for single molecule detection. This review provides an overview of progression in different techniques employed for single molecule detection.

Bsu polymerase-mediated fluorescence coding for rapid and sensitive detection of 8-oxo-7,8-dihydroguanine in telomeres of cancer cells

Guanine is the most susceptible to oxidation among all the DNA bases, and 8-oxo-7,8-dihydroguanine (OG) is one of main oxidation products that can occur in any part of chromosomal DNA. OG in the telomere sequence is associated with telomere shortening, cell aging, and dysfunction, and it may induce cancers. The accurate detection of OG in telomeres is important to early clinical diagnosis and molecular research. Herein, we develop a simple and rapid method to sensitively measure 8-oxo-7,8-dihydroguanine (OG) in telomeres of cancer cells by using Bsu polymerase-mediated fluorescence coding. This method is very simple without the requirement for any nucleic acid amplification or specific restriction enzyme recognition reaction, and Bsu polymerase can selectively incorporate Cy5-dATP into the opposite site of OG, endowing this method with good specificity. Moreover, the introduction of single-molecule detection significantly improves the sensitivity. This method can detect OG within 70 min with a limit of detection (LOD) of 2.45 × 10^-18 M, and it can detect OG in genomic DNA extracted from H₂O₂-treated HeLa cells with a LOD of 0.0094 ng, holding great potential in disease-specific gene damage research and early clinic diagnosis.

Anisotropic acoustic phonon polariton-enhanced infrared spectroscopy for single molecule detection

Nanoscale Fourier transform infrared spectroscopy (nano-FTIR) based on scanning probe microscopy enables the identification of the chemical composition and structure of surface species with a high spatial resolution (∼10 nm), which is crucial for exploring catalytic reaction processes, cellular processes, virus detection, etc. However, the characterization of a single molecule with nano-FTIR is still challenging due to the weak coupling between the molecule and infrared light due to a large size mismatch. Here, we propose a novel structure (monolayer α-MoO₃/air nanogap/Au) to excite anisotropic acoustic phonon polaritons (APhPs) with ultra-high field confinement (mode volume, V_APhPs∼ 10^-11V₀) and electromagnetic energy enhancement (>10⁷), which largely enhance the interaction of single molecules with infrared light. In addition, the anisotropic APhP-assisted nano-FTIR can detect single molecular dipoles in directions both along and perpendicular to the probe axis, while pristine nano-FTIR mainly detects molecular dipoles along the probe axis. The proposed structure provides a way to detect a single molecule, which will impact the fields of biology, chemistry, energy, and environment through fundamental research and applications.

Simultaneous Enzyme-Free Detection of Multiple Long Noncoding RNAs in Cancer Cells at Single-Molecule/Particle Level

Aberrant change in long noncoding RNA (lncRNA) is associated with various diseases and cancers. So far, simultaneous detection of lncRNAs has remained a great challenge due to their large size and extensive secondary structure. Herein, we develop an enzyme-free single-molecule/particle detection method for simultaneous detection of multiple lncRNAs in cancer cells based on target-catalyzed strand displacement. We designed the magnetic bead-capture probe-multiple Cy5/Cy3-modified reporter unit complexes to isolate and identify lncRNA MALAT1 and lncRNA HOTAIR. The target-catalyzed strand displacement reactions lead to the release of Cy5 and Cy3 fluorescent molecules from the complexes, which can be subsequently quantified by single-molecule/particle detection. The dual-targetability, good selectivity and high sensitivity of this method enables simultaneous detection of multiple lncRNAs in even single cancer cell. Importantly, this method can discriminate cancer cells from normal cells and has significant advantages in the simple sequence design and in being free of enzymes, holding great potential in living cell imaging and early clinical diagnosis.