Stimulus-Responsive Imprinted Polymer-Based Potentiometric Sensor for Reversible Detection of Neutral Phenols

Chronopotentiometric Nanopore Sensor Based on a Stimulus-Responsive Molecularly Imprinted Polymer for Label-Free Dual-Biomarker Detection

The development of sensors for detection of biomarkers exhibits an exciting potential in diagnosis of diseases. Herein, we propose a novel electrochemical sensing strategy for label-free dual-biomarker detection, which is based on the combination of stimulus-responsive molecularly imprinted polymer (MIP)-modified nanopores and a polymeric membrane chronopotentiometric sensor. The ion fluxes galvanostatically imposed on the sensing membrane surface can be blocked by the recognition reaction between the target biomarker in the sample solution and the stimulus-responsive MIP receptor in the nanopores, thus causing a potential change. By using two external stimuli (i.e., pH and temperature), the recognition abilities of the stimulus-responsive MIP receptor can be effectively modulated so that dual-biomarker label-free chronopotentiometric detection can be achieved. Using alpha fetoprotein (AFP) and prostate-specific antigen (PSA) as model biomarkers, the proposed sensor offers detection limits of 0.17 and 0.42 ng/mL for AFP and PSA, respectively.

Polymeric membrane potentiometric sensors based on template-removal-free imprinted receptors for determination of antibiotics

Currently, Nernstian-response-based polymeric membrane potentiometric sensors using molecularly imprinted polymers (MIPs) as receptors have been successfully developed for determination of organic ionic species. However, the preparation of these MIP receptors usually involves tedious and time-consuming template-removal procedures. Herein, a template-removal-free MIP is proposed and used as a receptor for fabrication of a potentiometric sensor. The proposed methodology not only significantly shortens the preparation time of MIP-based potentiometric sensors but also improves the batch-to-batch reproducibility of these sensors. By using antibiotic vancomycin as a model, the new concept offers a linear concentration range of 1.0 × 10-7 to 1.0 × 10-4 mol L-1 with a detection limit of 2.51 × 10-8 mol L-1. It can be expected that the template-removal-free MIP-based sensing strategy could lay the foundation for simple fabrication of electrochemical sensors without the need for template removal such as potentiometric and capacitive sensors and ion-sensitive field-effect transistors.

Improvement of the selectivity of a molecularly imprinted polymer-based potentiometric sensor by using a specific functional monomer

Potentiometric sensors based on the molecularly imprinted polymers (MIPs) as the receptors have been successfully developed for determination of various organic and biological species. However, these MIP receptors may suffer from problems of low selectivity. Especially, it would be difficult to distinguish the target analyte from its structurally similar interferents. In this work, we propose a novel strategy that using specific functional monomer to fabricate MIP with high selectivity towards the target molecule. The density functional theory calculations are used to investigate the interactions between the template and the functional monomer. The binding energy between the template and functional monomer can be used as the criterion for identifying the optimal monomer. As a proof-of-concept experiment, bisphenol A (BPA) is chosen as the template and the MIP is synthesized by the precipitation polymerization method using the specific allyl-β-cyclodextrin (allyl-β-CD) with high affinity towards BPA as the functional monomer. The high-affinity MIP is employed as the receptor for the construction of the potentiometric sensor. The proposed potentiometric sensor based on the MIP using allyl-β-CD as the functional monomer shows an improved response performance in terms of selectivity and sensitivity compared to the conventional potentiometric sensor based on the MIP with the common monomer (i.e., methacrylic acid). This allyl-β-CD MIP-based potentiometric sensor shows a detection limit of 0.29 μM for BPA, which is about one order of magnitude lower than that obtained by the conventional MIP-based potentiometric sensor. We believe that utilizing a functional monomer with specific recognition ability towards target in the fabrication of MIP could provide an appealing way to construct highly selective MIP-based electrochemical and optical sensors.

Novel electrochemical sensing platform basing on di-functional stimuli-responsive imprinted polymers for simultaneous extraction and determination of metronidazole

A novel magnetic-controlled electrochemical sensor has been fabricated by combined photo-responsive surface molecular imprinted polymers (P-SMIPs) and electrochemical sensor. In particular, the P-SMIPs were obtained by living radical polymerization of photo-responsive functional monomer onto the magnetic Fe₃O₄ modified multi-walled carbon nanotubes nanocomposites. The magnetic glassy carbon electrode was introduced to make the anchoring and removal of P-SMIPs onto the magnetic-controlled glassy carbon electrode easy to manipulate. Driven by UV/vis light, the platform performs releasing and absorption of metronidazole basing on conformational variations of the photo-responsive monomer at the receptor sites part in the P-SMIPs. This process can be tested by the photo-responsive variations of metronidazole electrochemical signal. As the consequence, extracting of P-SMIPs sensor can be conveniently triggered by the controllable UV light intervention measure, leading to effectively improve in both analytes mass transfer rate to the receiving media and extraction efficiency. The experimental result indicated that the excellent recoveries of metronidazole were varied between 77.9% and 89.9% with RSDs ≤4.87% in the biological samples. Therefore, the P-SMIPs sensor shows satisfactory potential in reusable extractions that can be recycled several times with no significant loss of activity, and this utilization strategy can be extended to other analytes, achieving manifold applications of pharmaceutical and environmental.

One-pot synthesis of ion-imprinted three-dimensional porous material based on graphene oxide for the selective adsorption of copper(II)

Molecularly imprinted polymers (MIPs) are synthetic polymers with predetermined selectivity for a given analyte. One major problem associated with MIPs is the inaccessibility of a large fraction of the recognition sites that remain buried within the polymeric matrix. To address this problem, the high selectivity imparted by the imprinting technique and the porosity of three-dimensional (3D) graphene oxide (GO)-based porous materials were utilized in this work to prepare a 3D GO-based Cu(II)-ion-imprinted material (hereafter denoted as IIM) via one-pot reactions of GO, chitosan (CS), and glutaraldehyde in the presence of Cu(II). Results of equilibrium binding experiments show that IIM has a high template-ion binding capacity (1.75 mmol g^-1) and good imprinting factor (2.19). Further, results of selectivity tests indicate that IIM has a high Cu(II)-recognition ability. IIM also has a fast binding rate and satisfactory reusability. In addition, the Langmuir isotherm model was well fitted with the experimental data, indicating the monolayer adsorption of Cu(II) ions. The present work provided a convenient approach to prepare 3D GO-based imprinted materials that are promising for enrichment or recycling of target compounds from wastewater.

Bio-Inspired Imprinting Materials for Biomedical Applications

Inspired by the recognition mechanism of biological molecules, molecular imprinting techniques (MITs) are imparted with numerous merits like excellent stability, recognition specificity, adsorption properties, and easy synthesis processes, and thus broaden the avenues for convenient fabrication protocol of bio-inspired molecularly imprinted polymers (MIPs) with desirable functions to satisfy the extensive demands of biomedical applications. Herein, the recent research progress made with respect to bio-inspired imprinting materials is discussed in this review. First, the underlying mechanism and basic components of a typical molecular imprinting procedure are briefly explored. Then, emphasis is put on the introduction of diverse MITs and novel bio-inspired imprinting materials. Following these two sections, practical applications of MIPs in the field of biomedical science are focused on. Last but not least, perspectives on the remaining challenges and future development of bio-inspired imprinting materials are presented.

Multifunctional Molecularly Imprinted Receptor-Based Polymeric Membrane Potentiometric Sensor for Sensitive Detection of Bisphenol A

Molecularly imprinted polymer (MIP)-based polymeric membrane potentiometric sensors have become an attractive tool for detection of organic species. However, the MIP receptors in potentiometric sensors developed so far are usually prepared by only using single functional monomers. This may lead to low affinities of the MIP receptors due to the lack of diversity of the functional groups, thus resulting in low detection sensitivity of the potentiometric sensors. Additionally, these classical MIP receptors are nonconductive polymers, which are undesirable for the fabrication of an electrochemical sensor. Herein, we describe a novel multifunctional MIP receptor-based potentiometric sensor. The multifunctional MIP receptor is prepared by using two functional monomers, methacrylic acid, and 3-vinylaniline with a dual functionality of both recognition and conduction properties. The poly(aniline) groups are introduced into the methacrylic acid-based MIP by postoxidation of the aniline monomer. Such poly(aniline) groups not only serve as the additional functional groups for selective recognition, but also work as a conducting polymer. The obtained multifunctional MIP receptor shows a high binding capacity and an excellent electron-transfer ability. By using bisphenol A as a model, the proposed multifunctional MIP sensor exhibits a largely improved sensitivity and low noise levels compared to the conventional MIP sensor. We believe that the proposed MIP-based sensing strategy provides a general and facile way to fabricate sensitive and selective MIP-based electrochemical sensors.

Towards potentiometric detection in nonaqueous media: Evaluation of the impacts of organic solvents on polymeric membrane ion-selective electrodes

Polymeric membrane ion-selective electrodes (ISEs) have been widely used in various fields including clinical diagnosis, environmental monitoring and industrial analysis. Although most samples of analytical interest measured by the ISEs are aqueous solutions, the applications of these electrodes in nonaqueous media are often inevitable. Unfortunately, so far, little has been known about the extent to which the properties of the ISEs could be affected by the organic solvents. Herein, the feasibility for the applications of the polymeric membrane ISEs in nonaqueous media has been investigated. A polymeric membrane Ca²⁺-ISE is chosen as a model of potentiometric sensors. Four typical water miscible organic solvents (three protic solvents: ethanol, acetic acid, and methanol, and one aprotic dipolar solvent: acetonitrile) are used as the representative examples. Experiments show that the aprotic solvent acetonitrile has the strongest destructive ability towards the sensing performance of the ISE in terms of Nernstian slope and selectivity coefficient. Moreover, the effect on the sensing performance depends on the kind of the protic solvent, the immersion time and the polarity of the membrane plasticizer. We believe that the obtained results could promote further applications of the polymeric membrane ISEs in the organic solvent-containing samples, which could significantly extend the application scope of the ISEs.

Self-cleaning electrochemical protein-imprinting biosensor with a dual-driven switchable affinity for sensing bovine serum albumin

A facile, universal and highly efficient approach for producing a self-cleaning electrochemical protein-imprinting biosensor based on dual stimuli-responsive memory hydrogels via free-radical polymerisation is described. As confirmed by static contact angle and scanning electron microscopy results, the imprinted hydrogels exhibited reversible conformational changes after being simulated by an external electric field and temperature. By exploring the properties of imprinted hydrogels for sensing applications, the electrochemical protein-imprinting biosensor was originally fabricated on a glassy carbon electrode using the drop-casting method. Because of the trigger gates of the temperature and electric field, the biosensor demonstrated excellent self-cleaning behaviours compared with other corresponding electric-field or thermo-responsive imprinting biosensors. Moreover, the prepared biosensor exhibited satisfactory selectivity, good biocompatibility, comparable limits of detection and linearity ranges as well as acceptable stability toward bovine serum albumin. Consequently, the biosensor was successfully employed to simultaneously enrich, detect and extract bovine serum albumin from complex biological samples; the process was dynamic, controllable and harmless to the template under the dual external stimuli. Thus, the proposed biosensor exhibited considerable potential in controlled drug/chemical delivery and smart sensing for bioanalyses involving dual stimuli-responsive behaviours.

Ag2S/Ag Nanoparticle Microelectrodes for In Vivo Potentiometric Measurement of Hydrogen Sulfide Dynamics in the Rat Brain

Hydrogen sulfide (H₂S) plays a pivotal role in gas signal transduction, neuroprotection, and regulation of physiological and pathological processes. However, in vivo tracking the dynamic of hydrogen sulfide in the complex brain environment still faces huge challenges. This study demonstrates a new potentiometric method to monitor in vivo the dynamics of hydrogen sulfide in the rat brain using silver nanoparticles (AgNPs)-modified carbon fiber microelectrodes (AgNPs/CFE) pretreated with Na₂S (i.e., Ag₂S/AgNPs/CFE), which acts as a solid-contact and ion-selective microelectrode. The Ag₂S/AgNPs/CFE exhibits good potential response toward hydrogen sulfide in the range of 2.5-160 μM, with a detection limit of 0.8 μM. Because of the presence of Ag₂S, the Ag₂S/AgNPs/CFE shows good selectivity to hydrogen sulfide, avoiding the interference from coexistent electroactive neurochemicals and the analogies, such as ascorbic acid and cysteine in the central nervous system. This good selectivity combined with the reversibility, protein antifouling, and biocompatibility of the microelectrode enables the Ag₂S/AgNPs/CFE to detect hydrogen sulfide in the rat brain during local microinfusion of Na₂S and the change in pH. Our study provides a reliable method to track hydrogen sulfide selectively in vivo, which will help to explore the function of hydrogen sulfide in neurophysiology and pathology.

A molecularly imprinted polymer-based potentiometric sensor based on covalent recognition for the determination of dopamine

Polymeric membrane potentiometric sensors based on molecularly imprinted polymers (MIPs) have been successfully designed for the detection of organic compounds both in ionic and neutral forms. However, most of these sensors are based on the non-covalent recognition interactions between the functional groups of the MIP in the polymeric sensing membrane and the target. These weak non-covalent interactions are unfavorable for the detection of hydrophilic organic compounds (e.g., dopamine). Herein novel MIP potentiometric sensor based covalent recognition for the determination of protonated dopamine is described. Uniform-sized boronate-based MIP beads are utilized as the recognition receptors. These receptors can covalently bind with dopamine with a cis-diol group to form a five-membered cyclic ester and thus provide a higher affinity because of the stronger nature of the covalent bonds. It has been found that the proposed electrode shows an excellent sensitivity towards dopamine with a detection limit of 2.1 μM, which could satisfy the needs for in vivo analysis of dopamine in the brain of living animals. We believe that the covalent recognition MIP-based sensing strategy provides an appealing way to design MIP-based electrochemical and optical sensors with excellent sensing properties.

Smart materials for point-of-care testing: From sample extraction to analyte sensing and readout signal generator

The last decade has seen a surge of technical developments in the field on point-of-care testing (POCT). While these developments are extremely diverse, the common aim is to implement improved methods for quick, reliable and inexpensive diagnosis of patients within the clinical setting. While examples of successful introduction and use of POCT techniques are growing, further developments are still necessary to create POCT devices with better portability, usability and performance. Advances in smart materials emerge as potentially valuable know-hows to provide a competitive edge to the development of next generation POCT devices. This review describes the key advantages of adopting smart material-based technologies at different analytical stages of a POCT platform. Under these analytical stages which involves sample pre-treatment, analyte sensing and readout signal generator, several concepts and approaches from contemporary research work in using smart material-based technologies will be the major focus in this review. Lastly, challenges and potential outlook in implementing materials technologies from the application point of view for POCT will be discussed.

Plasticizer-free polymer membrane potentiometric sensors based on molecularly imprinted polymers for determination of neutral phenols

Polymeric membrane potentiometric sensors based on molecularly imprinted polymers (MIPs) as the receptors have been successfully developed for detection of organic and biological species. However, it should be noted that all of the polymeric membrane matrices of these sensors developed so far are the plasticized poly(vinyl chloride) (PVC) membranes, which are usually suffered from undesired plasticizer leaching. Hence, for the first time, we describe a novel plasticizer-free MIP-based potentiometric sensor. A new copolymer, methyl methacrylate and 2-ethylhexyl acrylate (MMA-2-EHA), is synthesized and used as the sensing membrane matrix. By using neutral bisphenol A (BPA) as a model, the proposed plasticizer-free MIP sensor shows an excellent sensitivity and a good selectivity with a detection limit of 32 nM. Additionally, the proposed MMA-2-EHA-based MIP membrane exhibits lower cytotoxicity, higher hydrophobicity and better MIP dispersion ability compared to the classical plasticized PVC-based MIP sensing membrane. We believed that the new copolymer membrane-based MIP sensor can provide an appealing substitute for the traditional PVC membrane sensor in the development of polymeric membrane-based electrochemical and optical MIP sensors.