Direct Quantitation of 135Cs in Spent Cs Adsorbent Used for the Decontamination of Radiocesium-Containing Water by Laser Ablation Inductively Coupled Plasma Mass Spectrometry

226Ra and 137Cs determination by inductively coupled plasma mass spectrometry: state of the art and perspectives including sample pretreatment and separation steps

Achieving precise and accurate quantification of radium (²²⁶Ra) and cesium (¹³⁷Cs) by inductively coupled plasma mass spectrometry (ICP-MS) is of particular interest in the field of radiological monitoring and more widely in environmental and biological sciences. However, the accuracy and sensitivity of the quantification depend on the analytical strategy implemented. Eliminating interferences during the sample handling step and/or during the analysis step is critical since presence of matrix elements can lead to spectral and non-spectral interferences in ICP-MS. Consequently, before the ICP-MS analysis, multiple sample preparation approaches have been applied to purify and/or pre-concentrate environmental and biological samples containing radium and cesium through years, such as (co)-precipitation, solid phase extraction (SPE) or dispersive SPE (dSPE). Separation steps using liquid chromatography and capillary electrophoresis can also be useful in complement with the abovementioned sample preparation techniques. The most attractive sample handling technique remains SPE but efficiency of the extraction procedures is currently limited by sorbent specificity. Indeed, with the recent advances in ICP-MS instrumentation, it becomes indispensable to eliminate residual interferences and improve sensitivity. It is in this direction that it will be possible to meet analytical challenges, e.g. analyzing radium and cesium at concentrations below the pg L^-1 range in complex matrices of small volumes, as they are found for instance in pore waters or in biological samples. Development of new innovative sorbents based for example on hybrid and nanostructured materials has been reported with the aim of enhancing sorbent specificity and/or capacity. In the present review, the performances of the different analytical approaches are discussed, followed by an overview of applications.

Determination of Ultratrace Level 135Cs and 135Cs/137Cs Ratio in Small Volume Seawater by Chemical Separation and Thermal Ionization Mass Spectrometry

The atomic ratio of ¹³⁵Cs/¹³⁷Cs is a powerful fingerprint for distinguishing the source terms of radioactive contamination and tracing the circulation of water masses in the ocean. However, the determination of the ¹³⁵Cs/¹³⁷Cs ratio is very difficult due to the ultratrace level of ¹³⁵Cs (<0.02 mBq/m³) and ¹³⁷Cs (<2 Bq/m³) in the ordinary seawater samples. In this work, a sensitive method was developed for determination of ¹³⁵Cs concentration and ¹³⁵Cs/¹³⁷Cs ratio in seawater using chemical separation combined with thermal ionization mass spectrometry (TIMS) measurement. Cesium was first preconcentrated from seawater using ammonium molybdophosphate-polyacrylonitrile column chromatography and then purified using cation exchange chromatography to remove the interferences. With this method, decontamination factors of 6.0 × 10⁶ for barium and 1800 for rubidium and a chemical yield of more than 60% for cesium were achieved. By using glucose as an activator, the ionization efficiency of cesium was significantly improved to 50.6%, and a constant high current of Cs⁺ (20 V) can be maintained for more than 180 min, which ensures sensitive and reliable measurement of low level ¹³⁵Cs and ¹³⁷Cs. Detection limits of 4.0 × 10^-17 g/L for both ¹³⁵Cs and ¹³⁷Cs for 200 mL seawater were achieved, which enables the accurate determination of ¹³⁵Cs concentration and ¹³⁵Cs/¹³⁷Cs ratio in a small volume of seawater samples (<200 mL). The developed method has been validated by analysis of seawater reference material IAEA-443. Seawater samples collected from the Greenland Sea, Baltic Sea, and Danish Straits have been successfully analyzed for ¹³⁵Cs concentrations and ¹³⁵Cs/¹³⁷Cs ratios, and the results showed that ¹³⁵Cs concentrations in the seawater of the Baltic Sea is much higher than that in the Greenland Sea, which is attributed to the high deposition of Chernobyl accident derived radiocesium in the Baltic Sea region.