In Situ Monitoring of the “Point Discharge” Induced Antibacterial Process by the Onsite Formation of a Raman Probe

Quantifiable Relationship Between Antibacterial Efficacy and Electro-Mechanical Intervention on Nanowire Arrays

Physical disruption is an important antibacterial means as it is lethal to bacteria without spurring antimicrobial resistance. However, it is very challenging to establish a quantifiable relationship between antibacterial efficacy and physical interactions such as mechanical and electrical forces. Herein, titanium nitride (TN) nanowires with adjustable orientations and capacitances are prepared to exert gradient electro-mechanical forces on bacteria. While vertical nanowires show the strongest mechanical force resulting in an antibacterial efficiency of 0.62 log reduction (vs 0.22 for tiled and 0.36 for inclined nanowires, respectively), the addition of electrical charges maximizes the electro-mechanical interactions and elevates the antibacterial efficacy to more than 3 log reduction. Biophysical and biochemical analyses indicate that electrostatic attraction by electrical charge narrows the interface. The electro-mechanical intervention more easily stiffens and rips the bacteria membrane, disturbing the electron balance and generating intracellular oxidative stress. The antibacterial ability is maintained in vivo and bacteria-challenged rats are protected from serious infection. The physical bacteria-killing process demonstrated here can be controlled by adjusting the electro-mechanical interactions. Overall, these results revealed important principles for rationally designing high-performance antibacterial interfaces for clinical applications.

Supramolecular Polymeric Material Based on Twisted Cucurbit[14]uril: Sensitive Detection and Removal of Potential Cyanide from Water

Potassium ferricyanide in an aqueous solution is easily decomposed into highly toxic substances (potassium cyanide and hydrogen cyanide) by light or alkaline action, which poses a major hazard to environmental and human health. Here, a reticulated aggregation-induced emission (AIE) supramolecular polymer material (TPAP-Mb@tQ[14]) was prepared by the supramolecular self-assembly of twisted cucurbit[14]uril (tQ[14]) and a triphenylamine derivative (TPAP-Mb). TPAP-Mb@tQ[14] not only recognizes Fe(CN)₆^3- with sensitive specificity with a limit of detection (LOD) of 1.64 × 10^-7 M but can also effectively remove and adsorb Fe(CN)₆^3- from an aqueous solution with a removal rate as high as 97.38%. Meanwhile, an important component of the supramolecular polymer material (tQ[14]) can be reused. Thus, the tQ[14]-based supramolecular assembly has the potential to be used for applications addressing toxic anionic contaminants present in aqueous environments.

Understanding of chiral site-dependent enantioselective identification on a plasmon-free semiconductor based SERS substrate

Chiral differentiation is an important topic in diverse fields ranging from pharmaceutics to chiral synthesis. The improvement of sensitivity and the elucidation of the mechanism of chiral recognition are still the two main challenges. Herein, a plasmon-free semiconductive surface-enhanced Raman spectroscopy (SERS) substrate with sensitive chiral recognition ability is proposed for the discrimination of enantiomers. A homochiral environment is constructed by typical π–π stacking between l-tryptophan (l-Trp) and phenyl rings on well-aligned TiO₂ nanotubes (TiO₂ NTs). Using 3,4-dihydroxyphenylalanine (DOPA) enantiomers as the targets and the chelating interaction of Fe³⁺–DOPA for the onsite growth of Prussian blue (PB), the enantioselectivity difference between l-DOPA and d-DOPA on the homochiral substrate can be directly monitored from PB signals in the Raman-silent region. By combining the experimental results with molecular dynamic (MD) simulations, it is found that satisfactory enantioselective identification not only requires a homochiral surface but also largely depends on the chiral center environment-differentiated hydrogen-bond formation availability.

An intelligent enantioselective identification strategy is designed to demonstrate that both enantioselectivity and stereoselectivity are crucial factors for chiral sensing.

Highly sensitive detection of free testosterone assisted by magnetic nanobeads and gap-enhanced SERS nanotags

The quantitative determination of trace free testosterone (FT) is of great significance for the diagnosis of androgen-related endocrine diseases. Herein, a fascinating detection protocol was developed for highly sensitive FT analysis through a competitive immunoassay mechanism, which was composed of magnetic nanobeads (MNBs) and gap-enhanced surface enhanced Raman scattering (SERS) nanotags. With the MNBs as detection carriers, trace FT could be enriched by simple magnetic separation. The SERS nanotag constructed with silver-gold core-shell nanoparticle was acted as quantitative label, and Raman indicators were located at the interface between silver core and gold shell. It is demonstrated that the as-proposed protocol achieves high detection sensitivity for FT of 12.11 fg mL^-1, and wider linear dynamic detection range (LDR) in the concentration of 100 fg mL^-1 to 100 ng mL^-1 with R² value of 0.979, which is due to the enhanced Raman signal of the gap-enhanced SERS nanotag and the high surface-to-volume ratio of the MNB, respectively. Taking advantages of such sensitivity and accuracy approach, the as-developed powerful strategy presents potential applications for rapid disease diagnosis through analyzing trace levels of FT, and can also provide guidance for the exploitation of analysis project of other analytes.

Quantitative detection of 6-thioguanine in body fluids based on a free-standing liquid membrane SERS substrate

The adverse reactions caused by 6-thioguanine (6-TG) in anti-cancer treatment are closely related to the dose, leading to the urgent need for clinical monitoring of its concentration. In this work, a highly reproducible free-standing liquid membrane (FLM) surface-enhanced Raman spectroscopy (SERS) substrate was developed to detect 6-TG in human urine and serum quantitatively. Briefly, a prepared sample was adjusted to pH 2 and mixed with concentrated core-shell bimetallic nanoparticle (Ag_coreAu_shell NP) suspension. The Au/Ag ratio of the Ag_coreAu_shell NPs was optimized. Then the mixture was formed into an FLM using a custom mold. The relative standard deviation (RSD) of the experimental results can be stabilized below 10% (n ≥ 10). The R² of the calibration curve in the range of 10 ~ 100 μg kg^-1 was 0.988. In addition, the limit of detection (LOD) (3σ/k) of 6-TG was 5 μg kg^-1. The FLM SERS platform has been successfully applied to the rapid and reliable analysis of 6-TG spiked in body fluids.

Development of a pulse-induced electrochemical biosensor based on gluconamide for Gram-negative bacteria detection

Pathogenic bacteria can cause the outbreaks of disease and threaten human health, which stimulates the development of advanced detection techniques. Herein, a specific and sensitive electrochemical biosensor for Gram-negative bacteria was established based on the conductive polymer with artificial muscle properties.  The effective recognition was achieved through the specific carbohydrate-carbohydrate interaction between gluconamide and lipopolysaccharide.  The application of impulse voltage enhances the efficiency of recognition and shortens the detection time through the temporary deformation of the electrode surface, with a limit of detection (LOD)  of 1 × 10⁰ CFU/mL and a linear range of 1 × 10⁰ - 1 × 10⁶ CFU/mL for Escherichia coli (E. coli). In addition  to the merits of low cost, high efficiency, and rapidity,  the developed label-free electrochemical biosensor can also be applicable for other Gram-negative bacteria, owning promising potential in the application of portable devices and paving a potential way for the construction of electrochemical biosensors.

SERS substrate with wettability difference for molecular self-concentrating detection

The surface-enhanced Raman spectroscopy (SERS) has attracted much attention due to the powerful capability of quantificational analysis. Nowadays, most of the enhancement effect by SERS substrate is provided by the 'hot spots' occupying relatively small space. When the amount of analyte is too low, it is difficult to ensure that all the probe molecules can be placed into the 'hot spots', which is a headache in SERS quatification. In order to solve this problem, we have developed a structure of CuO nanowires/Ag nanoparticles with wettability capacity difference, which can aggregate molecules in water and oil simultaneously under two different mechanisms. The limit of detection and enhancement factor of this structure are estimated as 10^-15M and 1.55 × 10¹¹respectively (for rhodamine 6G, R6G). In a proof-in-principle experiment of sewage detection, it successfully achieved the aggregation and additional enhancement of both the R6G molecules in aqueous solution and thiuram molecules in toluene, realizing efficient and accurate Raman detection.

Wireless Battery-Free Generation of Electric Fields on One-Dimensional Asymmetric Au/ZnO Nanorods for Enhanced Raman Sensing

Wearable electronics have great potential in enhancing health monitoring, disease diagnosis, and environmental pollution tracking. Development of wearable surface-enhanced Raman spectroscopy (SERS) substrates with target sampling and sensitive sensing functions is a promising way to obtain physical and chemical information. This study describes a facile and effective approach for constructing an electrically modulated SERS (E-SERS) substrate as a wearable and wireless battery-free substrate with improved sensitivity. By integrating zinc oxide nanorods (ZnO NRs) with asymmetric gold decoration, controllable enhanced piezoelectric potentials were achieved using magnets to supply the adjustable pressure force. Owing to spatially oriented electron-hole pair separation on the asymmetric NRs, the local hotspot intensity at the Au tips is significantly improved, increasing the SERS signal by 6.7 times. This mechanism was quantitatively analyzed using Raman spectra by in situ formation of Prussian blue (PB). As a proof-of-concept, the E-SERS substrate was further used as a wearable flexible device to directly collect the sweat on a runner's skin and then monitor the lactate status of the runner. This study offers new insight into the development of E-SERS substrates and provides new design options for the construction of wearable sampling and sensing devices for the noninvasive monitoring of metabolites in healthcare and biomedical fields.