Scanning Gel Electrochemical Microscopy (SGECM): Lateral Physical Resolution by Current and Shear Force Feedback

Charge-induced deformation of scanning electrolyte before contact

The recent developments in scanning electrochemical probe techniques focus on the strategy of scanning the electrolyte. For example, scanning electrochemical cell microscopy (SECCM) is based on holding the electrolyte in a glass capillary, while scanning gel electrochemical microscopy (SGECM) immobilizes the gel electrolyte on micro-disk electrodes or etched metal wires. In both SECCM and SGECM, the first and essential step is to bring the electrolyte probe into contact with the sample, which is very often achieved by current feedback with a constant applied potential between the probe and the sample. This work attempts to theoretically analyse the deformation of the electrolyte during this approaching process. For a liquid electrolyte in SECCM, surface tension is considered to counterbalance the gravity and electrostatic force in 2D cylindrical coordinates with axial symmetry. The deformation at equilibrium is solved under certain conditions. For a gel electrolyte, a viscoelastic gel is analysed with a simplified 1D geometry. Both equilibrium and dynamic approaching are considered. The results suggest that for both liquid and gel electrolytes, critical conditions exist for breaking the equilibrium. When the applied potential is higher or the distance is lower than the threshold, the force will not equilibrate and the electrolyte will deform until contact. The critical condition depends on the properties (surface tension for a liquid, elastic and viscous moduli for a gel) and geometry (radius of the capillary for a liquid, thickness for a gel) of the electrolyte. Prospects of further extending the work closer to real experimental scenarios, especially SGECM, are also discussed.

Variable Nanoelectrode at the Air/Water Interface by Hydrogel-Integrated Atomic Force Microscopy Electrochemical Platform

A nanoelectrode with a controllable area was developed using commercial atomic force microscopy and a hydrogel. Although tremendous advantages of small electrodes from micrometer scale down to nanometer scale have been previously reported for a wide range of applications, precise and high-throughput fabrication remains an obstacle. In this work, the set-point feedback current in a modified scanning ionic conductance microscopy system controlled the formation of electrodes with a nanometer-sized area by contact between the boron-doped diamond (BDD) tip and the agarose hydrogel. The modulation of the electroactive area of the BDD-coated nanoelectrode in the hydrogel was successively investigated by the finite element method and cyclic voltammetry with the use of a redox-contained hydrogel. Moreover, this nanoelectrode enables the simultaneous imaging of both the topography and electrochemical activity of a polymeric microparticle embedded in a hydrogel.

Controlling Surface Contact, Oxygen Transport, and Pitting of Surface Oxide via Single-Channel Scanning Electrochemical Cell Microscopy

In single-channel scanning electrochemical cell microscopy, the applied potential during the approach of a micropipette to the substrate generates a transient current upon droplet contact with the substrate. Once the transient current exceeds a set threshold, the micropipette is automatically halted. Currently, the effect of the approach potential on the subsequent electrochemical measurements, such as the open-circuit potential and potentiodynamic polarization, is considered to be inconsequential. Herein, we demonstrate that the applied approach potential does impact the extent of probe-to-substrate interaction and subsequent microscale electrochemical measurements on aluminum alloy AA7075-T73.

Electrochemical Glue for Binding Chitosan–Alginate Hydrogel Fibers for Cell Culture

Three-dimensional organs and tissues can be constructed using hydrogels as support matrices for cells. For the assembly of these gels, chemical and physical reactions that induce gluing should be induced locally in target areas without causing cell damage. Herein, we present a novel electrochemical strategy for gluing hydrogel fibers. In this strategy, a microelectrode electrochemically generated HClO or Ca2+, and these chemicals were used to crosslink chitosan–alginate fibers fabricated using interfacial polyelectrolyte complexation. Further, human umbilical vein endothelial cells were incorporated into the fibers, and two such fibers were glued together to construct “+”-shaped hydrogels. After gluing, the hydrogels were embedded in Matrigel and cultured for several days. The cells spread and proliferated along the fibers, indicating that the electrochemical glue was not toxic toward the cells. This is the first report on the use of electrochemical glue for the assembly of hydrogel pieces containing cells. Based on our results, the electrochemical gluing method has promising applications in tissue engineering and the development of organs on a chip.

Nanoscale kinetic imaging of lithium ion secondary battery materials using scanning electrochemical cell microscopy

To visualize the electrochemical reactivity and obtain the diffusion coefficient of the anode of lithium-ion batteries, we used scanning electrochemical cell microscopy (SECCM) in a glovebox. SECCM provided the facet-dependent diffusion coefficient on a Li₄Ti₅O₁₂ (LTO) thin-film electrode and detected the metastable crystal phase of Li_xFePO₄.