Easy Surface Functionalization and Bioconjugation of Peptides as Capture Agents of a Microfluidic Biosensing Platform for Multiplex Assay in Serum

Characterization of bovine serum albumin immobilization on surface modified glass slides in case of pyro-electrohydrodynamic spots

BACKGROUND

Pyro-electrohydrodynamic jetting (p-jet) has emerged recently as a promising technique for biosensing applications, through the concentration of highly diluted biomolecules in fluorescent spots at microscale. However, a great challenge still remains in optimizing the binding strategy for the sensing interface, enabling the detection of low abundance proteins through immunofluorescence protocols. Indeed, the surface of reaction can be functionalized with different chemical groups able to bind the target molecule with a strong interaction, prior to the p-jet spots decreasing the possibility to lose sensitivity after the common rinsing steps.

RESULTS

Here, we characterize the immobilization of a model protein, specifically the bovine serum albumin (BSA), in the concentrated p-jet spots to demonstrate the reliability of the technique for highly sensitive immunodetection assays. We first performed spectroscopic measurements on BSA deposited through pipette spots at relatively high concentrations and we achieved a higher efficiency in case of the covalent bond by using the carbonate buffer and the epoxy-based slides. We then tested the covalent setting in case of the p-jet spots with highly diluted samples of pre-labelled BSA. A significant concentration-dependent behavior of the signal was obtained down to picogram levels. Finally, an immunofluorescent protocol was settled with the p-jet spots and a Limit of the Detection (LOD) of 0. 27 pg/mL was reached.

SIGNIFICANCE

The demonstration here that the p-jet spots are compatible with immunodetection procedures and provide a LOD down to 0.27 pg/mL, launches the p-jet technique towards the development in future of a point-of-care (POC) diagnostic tool. This would become a major force in analytical chemical laboratories. The identification of highly diluted biomarkers from peripheral body fluids would help clinicians performing early diagnosis, overcoming the limitations of the traditional immunochemistry tests, such as the enzyme-linked immunosorbent assay (ELISA).

Highly sensitive detection of the neurodegenerative biomarker Tau by using the concentration effect of the pyro-electrohydrodynamic jetting

It is largely documented that neurodegenerative diseases can be effectively treated only if early diagnosed. In this context, the structural changes of some biomolecules such as Tau, seem to play a key role in neurodegeneration mechanism becoming eligible targets for an early diagnosis. Post-translational modifications are responsible to drive the Tau protein towards a transition phase from a native disorder conformation into a preaggregation state, which then straight recruits the final fibrillization process. Here, we show for the first time the detection of pre-aggregated Tau in artificial urine at femto-molar level, through the concentration effect of the pyro-electrohydrodynamic jet (p-jet) technique. An excellent linear calibration curve is demonstrated at the femto-molar level with a limit of detection (LOD) of 130 fM. Moreover, for the first time we show here the structure stability of the protein after p-jet application through a deep spectroscopic investigation. Thanks to the small volumes required and the relatively compact and cost-effective characteristics, this technique represents an innovative breakthrough in monitoring the early stage associated to neurodegeneration syndromes in different scenarios of point of care (POC) and such as for example in long-term human space exploration missions.

Protein Identification and Quantification Using Porous Silicon Arrays, Optical Measurements, and Machine Learning

We report a versatile platform based on an array of porous silicon (PSi) thin films that can identify analytes based on their physical and chemical properties without the use of specific capture agents. The ability of this system to reproducibly classify, quantify, and discriminate three proteins separately is demonstrated by probing the reflectance of PSi array elements with a unique combination of pore size and buffer pH, and by analyzing the optical signals using machine learning. Protein identification and discrimination are reported over a concentration range of two orders of magnitude. This work represents a significant first step towards a low-cost, simple, versatile, and robust sensor platform that is able to detect biomolecules without the added expense and limitations of using capture agents.

Alternating Magnetic Field-Promoted Nanoparticle Mixing: The On-Chip Immunocapture of Serum Neuronal Exosomes for Parkinson's Disease Diagnostics

The analysis of cargo proteins in exosome subpopulations has considerable value in diagnostics but a translatable impact has been limited by lengthy or complex exosome extraction protocols. We describe herein a scalable, fast, and low-cost exosome extraction using an alternating (AC) magnetic field to support the dynamic mixing of antibody-coated magnetic beads (MBs) with serum samples within 3D-printed microfluidic chips. Zwitterionic polymer-coated MBs are, specifically, magnetically agitated and support ultraclean exosome capture efficiencies >70% from <50 μL of neat serum in 30 min. Applied herein to the immunocapture of neuronal exosomes using anti-L1CAM antibodies, prior to the array-based assaying of α-synuclein (α-syn) content by a standard duplex electrochemical sandwich ELISA, sub pg/mL detection was possible with an excellent coefficient of variation and a sample-to-answer time of ∼75 min. The high performance and semiautomation of this approach hold promise in underpinning low-cost Parkinson's disease diagnostics and is of value in exosomal biomarker analyses more generally.

Peptide-based direct electrochemical detection of receptor binding domains of SARS-CoV-2 spike protein in pristine samples

RNA isolation and amplification-free user-friendly detection of SARS-CoV-2 is the need of hour especially at resource limited settings. Herein, we devised the peptides of human angiotensin converting enzyme-2 (hACE-2) as bioreceptor at electrode interface for selective targeting of receptor binding domains (RBD) of SARS-CoV-2 spike protein (SP). Disposable carbon-screen printed electrode modified with methylene blue (MB) electroadsorbed graphene oxide (GO) has been constructed as cost-efficient and scalable platform for hACE-2 peptide-based SARS-CoV-2 detection. In silico molecular docking of customized 25 mer peptides with RBD of SARS-CoV-2 SP were validated by AutoDock CrankPep. N-terminal region of ACE-2 showed higher binding affinity of - 20.6 kcal/mol with 15 H-bond, 9 of which were < 3 Å. Electrochemical biosensing of different concentrations of SPs were determined by cyclic voltammetry (CV) and chronoamperometry (CA), enabling a limit of detection (LOD) of 0.58 pg/mL and 0.71 pg/mL, respectively. MB-GO devised hACE-2 peptide platform exert an enhanced current sensitivity of 0.0105 mA/pg mL^-1 cm^-2 (R² = 0.9792) (CV) and 0.45 nA/pg mL^-1 (R² = 0.9570) (CA) against SP in the range of 1 pg/mL to 1 µg/mL. For clinical feasibility, nasopharyngeal and oropharyngeal swab specimens in viral transport medium were directly tested with the prepared peptide biosensor and validated with RT-PCR, promising for point-of-need analysis.

PLGA microparticle formulations for tunable delivery of a nano-engineered filamentous bacteriophage-based vaccine: in vitro and in silico-supported approach

Bacteriophages have attracted great attention in the bioengineering field in diverse research areas from tissue engineering to therapeutic and clinical applications. Recombinant filamentous bacteriophage, carrying multiple copies of foreign peptides on protein capsid has been successfully used in the vaccine delivery setting, even if their plasma instability and degradation have limited their use on the pharmaceutical market. Encapsulation techniques in polymeric materials can be applied to preserve bacteriophage activity, extend its half-life, and finely regulate their release in the target environment. The main goal of this study was to provide tunable formulations of the bacteriophage encapsulated in polymeric microparticles (MPs). We used poly (lactic-co-glycolic-acid) as a biocompatible and biodegradable polymer with ammonium bicarbonate as a porogen to encapsulate bacteriophage expressing OVA (257-264) antigenic peptide. We demonstrate that nano-engineered fdOVA bacteriophages encapsulated in MPs preserve their structure and are immunologically active, inducing a strong immune response towards the delivered peptide. Moreover, MP encapsulation prolongs bacteriophage stability over time also at room temperature. Additionally, in this study, we show the ability of in silico-supported approach to predict and tune the release of bacteriophages. These results lay the framework for a versatile bacteriophage-based vaccine delivery system that could successfully generate robust immune responses in a sustained manner, to be used as a platform against cancer and new emerging diseases.

Graphical abstract

Synopsis: administration of recombinant bacteriophage-loaded PLGA microparticles for antigen delivery. PLGA microparticles release the bacteriophages, inducing activation of dendritic cells and enhancing antigen presentation and specific T cell response. Bacteriophage-encapsulated microneedles potentially can be administered into human body and generate robust immune responses.

Engineered Bacterial Cellulose Nanostructured Matrix for Incubation and Release of Drug-Loaded Oil in Water Nanoemulsion

Bacterial cellulose (BC) is a highly pure form of cellulose produced by bacteria, which possesses numerous advantages such as good mechanical properties, high chemical flexibility, and the ability to assemble in nanostructures. Thanks to these features, it achieved a key role in the biomedical field and in drug delivery applications. BC showed its ability to modulate the release of several drugs and biomolecules to the skin, thus improving their clinical outcomes. This work displays the loading of a 3D BC nanonetwork with an innovative drug delivery nanoemulsion system. BC was optimized by static culture of SCOBY (symbiotic colony of bacteria and yeast) and characterized by morphological and ultrastructural analyses, which indicate a cellulose fiber diameter range of 30–50 nm. BC layers were then incubated at different time points with a nanocarrier based on a secondary nanoemulsion (SNE) previously loaded with a well-known antioxidant and anti-inflammatory agent, namely, coenzyme-Q10 (Co-Q10). Incubation of Co-Q10–SNE in the BC nanonetwork and its release were analyzed by fluorescence spectroscopy.