Polysaccharide-Based Conjugates for Biomedical Applications

Recent Advances in the Degradability and Applications of Tissue Adhesives Based on Biodegradable Polymers

In clinical practice, tissue adhesives have emerged as an alternative tool for wound treatments due to their advantages in ease of use, rapid application, less pain, and minimal tissue damage. Since most tissue adhesives are designed for internal use or wound treatments, the biodegradation of adhesives is important. To endow tissue adhesives with biodegradability, in the past few decades, various biodegradable polymers, either natural polymers (such as chitosan, hyaluronic acid, gelatin, chondroitin sulfate, starch, sodium alginate, glucans, pectin, functional proteins, and peptides) or synthetic polymers (such as poly(lactic acid), polyurethanes, polycaprolactone, and poly(lactic-co-glycolic acid)), have been utilized to develop novel biodegradable tissue adhesives. Incorporated biodegradable polymers are degraded in vivo with time under specific conditions, leading to the destruction of the structure and the further degradation of tissue adhesives. In this review, we first summarize the strategies of utilizing biodegradable polymers to develop tissue adhesives. Furthermore, we provide a symmetric overview of the biodegradable polymers used for tissue adhesives, with a specific focus on the degradability and applications of these tissue adhesives. Additionally, the challenges and perspectives of biodegradable polymer-based tissue adhesives are discussed. We expect that this review can provide new inspirations for the design of novel biodegradable tissue adhesives for biomedical applications.

Extraction and In Vitro Skincare Effect Assessment of Polysaccharides Extract from the Roots of Abelmoschus manihot (L.)

Obtaining high-added value compounds from agricultural waste receives increasing attention, as it can both improve resource utilization efficiency and reduce waste generation. In this study, polysaccharides are extracted from the discarded roots of Abelmoschus manihot (L.) by the high-efficiency ultrasound-assisted extraction (UAE). The optimized condition was determined as solid-liquid ratio SL ratio = 1:20, temperature T = 30 °C and time T = 40 min, achieving an extraction yield of 13.41%. Composition analysis revealed that glucose (Glc, 44.65%), rhamnose (Rha, 26.30%), galacturonic acid (GalA, 12.50%) and galactose (Gal, 9.86%) are the major monosaccharides of the extract. The extract showed a low degree of esterification (DE) value of 40.95%, and its Fourier-transform infrared (FT-IR) spectrum exhibited several characteristic peaks of polysaccharides. Inspired by the wide cosmetic applications of polysaccharides, the skincare effect of the extract was evaluated via the moisture retention, total phenolic content (TPC) quantification, 2,2-Diphenyl-1-picrylhydrazyl (DPPH)-free radical scavenging activity, anti-hyaluronidase and anti-elastase activity experiments. The extract solutions demonstrated a 48 h moisture retention rate of 10.75%, which is superior to that of commercially available moisturizer hyaluronic acid (HA). Moreover, both the TPC value of 16.16 mg GAE/g (dw) and DPPH-free radical scavenging activity of 89.20% at the concentration of 2 mg/mL indicated the strong anti-oxidant properties of the extract. Furthermore, the anti-hyaluronidase activity and moderate anti-elastase activity were determined as 72.16% and 42.02%, respectively. In general, in vitro skincare effect experiments suggest moisturizing, anti-oxidant, anti-radical and anti-aging activities of the A. manihot root extract, indicating its potential applications in the cosmetic industry.

Searching for Conjugates as New Structures for Antifungal Therapies

The progressive increase in fungal infections and the decrease in the effectiveness of current therapy explain research on new drugs. The synthesis of compounds with proven antifungal activity, favorable physicochemical and pharmacokinetic properties affecting their pharmaceutical availability and bioavailability, and limiting or eliminating side effects has become the goal of many studies. The publication describes the directions of searching for new compounds with antifungal activity, focusing on conjugates. The described modifications include, among others, azoles or amphotericin B in combination with fatty acids, polysaccharides, proteins, and synthetic polymers. The benefits of these combinations in terms of activity, mechanism of action, and bioavailability were indicated. The possibilities of creating or using nanoparticles, "umbrella" conjugates, siderophores (iron-chelating compounds), and monoclonal antibodies were also presented. Taking into account the role of vaccinations in prevention, the scope of research related to developing a vaccine protecting against fungal infections was also indicated.

The advancement of polysaccharides in disease modulation: Multifaceted regulation of programmed cell death

Programmed cell death (PCD), also known as regulatory cell death (RCD), is a process that occurs in all organisms and is closely linked to both normal physiological processes and disease states. Various signaling pathways, such as TP53, KRAS, NOTCH, hypoxia, and metabolic reprogramming, have been found to regulate RCD. Polysaccharides, which are essential natural products, have been the subject of extensive research in the fields of food, nutrition, and medicine due to their wide range of pharmacological effects. Studies have shown that polysaccharides have biological activities and the potential to target signal transduction pathways for the treatment of diseases. This paper provides a review of the mechanisms through which polysaccharides exert their therapeutic effects at different levels and explores the relationship between different types of RCD and human diseases. The aim of this review is to provide a theoretical basis for the further clinical use and application of polysaccharide bioactivities.

Surface modification strategies for improved hemocompatibility of polymeric materials: a comprehensive review

Polymeric biomaterials are a widely used class of materials due to their versatile properties. However, as with all other types of materials used for biomaterials, polymers also have to interact with blood. When blood comes into contact with any foreign body, it initiates a cascade which leads to platelet activation and blood coagulation. The implant surface also has to encounter a thromboinflammatory response which makes the implant integrity vulnerable, this leads to blood coagulation on the implant and obstructs it from performing its function. Hence, the surface plays a pivotal role in the design and application of biomaterials. In particular, the surface properties of biomaterials are responsible for biocompatibility with biological systems and hemocompatibility. This review provides a report on recent advances in the field of surface modification approaches for improved hemocompatibility. We focus on the surface properties of polysaccharides, proteins, and synthetic polymers. The blood coagulation cascade has been discussed and blood - material surface interactions have also been explained. The interactions of blood proteins and cells with polymeric material surfaces have been discussed. Moreover, the benefits as well as drawbacks of blood coagulation on the implant surface for wound healing purposes have also been studied. Surface modifications implemented by other researchers to enhance as well as prevent blood coagulation have also been analyzed.

Utilizing epoxy Bletilla striata polysaccharide collagen sponge for hemostatic care and wound healing

Hemostatic materials that are lightweight and possess good blood absorption performance have been widely considered for use in modern wound care. Natural hemostatic ingredients derived from traditional Chinese medicine have also received extensive attention. Bletilla polysaccharides are valued by researchers for their excellent hemostatic performance and good reactivity. Collagen is favored by researchers due to its high biocompatibility and low immunogenicity. In this study, Bletilla striata polysaccharide, the main hemostatic component of Bletilla striata, was activated by epoxy groups, and epoxidized Bletilla striata polysaccharide (EBSP) was prepared. Then, EBSP was crosslinked with collagen under alkaline conditions, and a new hemostatic material that was an epoxidized Bletilla polysaccharide crosslinked collagen hemostatic sponge was prepared. We demonstrated that endowing collagen with better hemostatic performance, cytocompatibility, and blood compatibility does not destroy its original three-stranded helical structure. Compared with the medical gauze, hemostasis time was shorter (26.75 ± 2.38 s), and blood loss was lower (0.088 ± 0.051 g) in the rat liver injury hemostasis model. In the rat model of severed tail hemostasis, hemostasis time was also shorter (47.33 ± 2.05 s), and the amount of blood loss was lower (0.330 ± 0.122 g). The sponge possessed good hemostatic and healing performance.

Dendronization of chitosan to afford unprecedent thermoresponsiveness and tunable microconfinement

Convenient chemical modification of biomacromolecules to create novel biocompatible functional materials satisfies the current requirements of sustainable chemistry. Dendronization of chitosan with dendritic oligoethylene glycols (OEGs) paves a strategy for the preparation of functional dendronized chitosans (DCSs) with unprecedent thermoresponsive behavior, which inherit biological features from polysaccharides and the topological features from dendritic OEGs. In addition, densely packed dendritic OEG chains around the backbone provide efficient cooperative interactions and form an intriguing confined microenvironment based on the degradable biopolymers. In this perspective, we describe the principle for the preparation of the thermoresponsive DCSs, and focus on the molecular envelop effect from the hydrophobic microconfinement to the encapsulated guest molecules or moieties. Particular attention is put on their capacity to regulate behavior and the functions of the encapsulated guests through thermally-mediated dehydration and collapse of the densely packed dendritic OEGs. We believe that the methodology described here may provide prospects for the fabrication of functional materials from biomacromolecules, especially when used as environmentally friendly nanomaterials or in accurate diagnosis and therapy.

Catechol-chitosan/carboxymethylated cotton-based Janus hemostatic patch for rapid hemostasis in coagulopathy

Uncontrolled bleeding is the leading cause of death, and the death risk of bleeding from coagulopathy is even higher. By infusing the relevant coagulation factors, bleeding in patients with coagulopathy can be clinically treated. However, there are not many emergency hemostatic products accessible for coagulopathy patients. In response, a Janus hemostatic patch (PCMC/CCS) with a two-layer structure of partly carboxymethylated cotton (PCMC) and catechol-grafted chitosan (CCS) was developed. Ultra-high blood absorption (4000 %) and excellent tissue adhesion (60 kPa) were both displayed by PCMC/CCS. The proteomic analysis revealed that PCMC/CCS has significantly contributed to the creative generation of FV, FIX, and FX, as well as to the substantial enrichment of FVII and FXIII, re-paving the initially blocked coagulation pathway of coagulopathy to promote hemostasis. The in vivo bleeding model of coagulopathy demonstrated that PCMC/CCS was substantially more effective than gauze and commercial gelatin sponge at achieving hemostasis in just 1 min. The study provides one of the first investigations on procoagulant mechanisms in anticoagulant blood conditions. Rapid hemostasis in coagulopathy will be significantly affected by the results of this experiment.

Preparation of injectable hydrophilic dextran/AgNPs nanocomposite product: White light active biomolecules as an antitumor agent

Incidence of various cancers including melanoma continues to rise worldwide. While treatment options have expanded in the recent years, the benefit of these treatments suffer from short period of duration for many patients. Hence, new treatment options are highly desired. Here, we propose a method combining a Dextran/reactive-copolymer/AgNPs nanocomposite and a harmless visible light approach to obtain a plasma substitute carbohydrate-based nanoproduct (D@AgNP) that shows strong antitumor activity. Light-driven polysaccharide-based nanocomposite provided essential conditions for extra small (8-12nm) AgNPs capping with subsequent specific self-assembly into spherical-like cloud nanostructures. Obtained biocompatible D@AgNP are stable over six months at room temperature and demonstrated absorbance peak at 406 nm. New formulated nanoproduct revealed efficient anticancer properties against A375 with IC50 0.0035 mg/mL following 24-h incubation; complete cell death is achieved at 0.001 mg/mL and 0.0005 mg/mL by 24- and 48-h time points, respectively. SEM examination shows that D@AgNP altered the shape of the cell structure and damaged the cell membrane. TEM finding shows that D@AgNP are mostly localized at vesicles such as the endosomes, lysosomes and mitochondria. It is anticipated that the introduced new method serves as the cornerstone for improving the generation of biocompatible hydrophilic carbohydrate-based anticancer drugs.

Recent advances in pH/enzyme-responsive polysaccharide-small-molecule drug conjugates as nanotherapeutics

Now-a-days, the polysaccharides are extensively employed for the delivery of small-molecule drugs ascribed to their excellent biocompatibility, biodegradability and modifiability. An array of drug molecules is often chemically conjugated with different polysaccharides to augment their bio-performances. As compared to their therapeutic precursors, these conjugates could typically demonstrate an improved intrinsic solubility, stability, bioavailability and pharmacokinetic profiles of the drugs. In current years, various stimuli-responsive particularly pH and enzyme-sensitive linkers or pendants are also exploited to integrate the drug molecules into the polysaccharide backbone. The resulting conjugates could experience a rapid molecular conformational change upon exposure to the microenvironmental pH and enzyme changes of the diseased states, triggering the release of the bioactive cargos at the targeted sites and eventually minimize the systemic side effects. Herein, the recent advances in pH and enzyme -responsive polysaccharide-drug conjugates and their therapeutic benefits are systematically reviewed, following a brief description on the conjugation chemistry of the polysaccharides and drug molecules. The challenges and future perspectives of these conjugates are also precisely discussed.

Advances in the development and optimization strategies of the hemostatic biomaterials

Most injuries are accompanied by acute bleeding. Hemostasis is necessary to relieve pain and reduce mortality in these accidents. In recent years, the traditional hemostatic materials, including inorganic, protein-based, polysaccharide-based and synthetic materials have been widely used in the clinic. The most prominent of these are biodegradable collagen sponges (Helistat^®, United States), gelatin sponges (Ethicon^®, SURGIFOAM^®, United States), chitosan (AllaQuixTM, ChitoSAMTM, United States), cellulose (Tabotamp^®, SURGICEL^®, United States), and the newly investigated extracellular matrix gels, etc. Although these materials have excellent hemostatic properties, they also have their advantages and disadvantages. In this review, the performance characteristics, hemostatic effects, applications and hemostatic mechanisms of various biomaterials mentioned above are presented, followed by several strategies to improve hemostasis, including modification of single materials, blending of multiple materials, design of self-assembled peptides and their hybrid materials. Finally, the exploration of more novel hemostatic biomaterials and relative coagulation mechanisms will be essential for future research on hemostatic methods.

Polyanhydride Chemistry

Polyanhydrides (PAs) are a class of synthetic biodegradable polymers employed as controlled drug delivery vehicles. They can be synthesized and scaled up from low-cost starting materials. The structure of PAs can be manipulated synthetically to meet desirable characteristics. PAs are biocompatible, biodegradable, and generate nontoxic metabolites upon degradation, which are easily eliminated from the body. The rate of water penetrating into the polyanhydride (PA) matrix is slower than the anhydride bond cleavage. This phenomenon sets PAs as "surface-eroding drug delivery carriers." Consequently, a variety of PA-based drug delivery carriers in the form of solid implants, pasty injectable formulations, microspheres, nanoparticles, etc. have been developed for the sustained release of small molecule drugs, and vaccines, peptide drugs, and nucleic acid-based active agents. The rate of drug delivery is often controlled by the polymer erosion rate, which is influenced by the polymer structure and composition, crystallinity, hydrophobicity, pH of the release medium, device size, configuration, etc. Owing to the above-mentioned interesting physicochemical and mechanical properties of PAs, the present review focuses on the advancements made in the domain of synthetic biodegradable biomedical PAs for therapeutic delivery applications. Various classes of PAs, their structures, their unique characteristics, their physicochemical and mechanical properties, and factors influencing surface erosion are discussed in detail. The review also summarizes various methods involved in the synthesis of PAs and their utility in the biomedical domain as drug, vaccine, and peptide delivery carriers in different formulations are reviewed.

Hydrolytic Quinoa Protein and Cationic Lotus Root Starch-Based Micelles for Co-Delivery of Quercetin and Epigallo-catechin 3-Gallate in Ulcerative Colitis Treatment

The accumulation and sustained release of drugs in the colonic inflammatory region are the favorable strategy for treating ulcerative colitis (UC). In this study, we developed a synergistic anti-inflammatory drug (quercetin/EGCG)-loaded micelle using hydrolytic quinoa protein (HQP) and cationic lotus root starch (CLRS) by a layer-by-layer assembly method. The encapsulation efficiency of quercetin and EGCG in the Que-HQP-EGCG-CLRS micelles reached 91.5 and 89.4%, respectively. This composite micelle exhibited a core-shell structure, where Que-HQP-EGCG was the core and CLRS was the coating shell. Moreover, the in vitro experiments indicated that these micelles can make Que/EGCG pass through gastric environments stably and delay their release in the intestine. Animal experiments further confirmed that the Que-HQP-EGCG-CLRS micelles can efficiently accumulate in the colonic inflammatory region and enable sustained release of drugs (more than 24 h), thus notably alleviating the symptoms of UC. These results suggested that Que-HQP-EGCG-CLRS micelles have good gastric stability, colonic inflammatory-accumulated effect, and sustained drug release ability, which are a promising co-delivery system for UC treatment.

Polysaccharide peptide conjugates: Chemistry, properties and applications

The intention of this publication is to give an overview on research related to conjugates of polysaccharides and peptides. Dextran, chitosan, and alginate were selected, to cover four of the most often encountered functional groups known to be present in polysaccharides. These groups are the hydroxyl, the amine, the carboxyl, and the acetal functionality. A collection of the commonly used chemical reactions for conjugation is provided. Conjugation results into distinct properties compared to the parent polysaccharide, and a number of these characteristics are highlighted. This review aims at demonstrating the applicability of said conjugates with a strong emphasis on biomedical applications, drug delivery, biosensing, and tissue engineering. Some suggestions are made for more rigorous chemistries and analytics that could be investigated. Finally, an outlook is given into which direction the field could be developed further. We hope that this survey provides the reader with a comprehensive summary and contributes to the progress of works that aim at synthetically combining two of the main building blocks of life into supramolecular structures with unprecedented biological response.

Self-assembling nanowires from a linear l,d-peptide conjugated to the dextran end group

Preparation and characterization of a block-like l,d-octapeptide-dextran conjugate DEX₂₉-(l-Val-d-Val)₄ self-assembling into nanowire structures is reported. The conjugate was prepared by solid phase click-chemistry on an alkyne group N-terminus functionalized peptide with a regularly alternating enantiomeric sequence. Low molecular weight dextran (X_n = 29) with moderately low dispersity (1.30) was prepared by controlled acid hydrolysis and dialysis with selected cut-off and functionalized with an azido group on the reducing end by reductive amination. The strong hydrogen bonds and hydrophobic interactions of the (l-Val-d-Val)₄ linear peptide drive the conjugate to self-assemble into long (0.1-1 μm) nanowires. To our knowledge, this is the first example of a peptide-polysaccharide conjugate that can self-assemble into a nanowire architecture.

Polysaccharide hydrogels: Functionalization, construction and served as scaffold for tissue engineering

Polysaccharide hydrogels have been widely utilized in tissue engineering. They interact with the organismal environments, modulating the cargos release and realizing of long-term survival and activations of living cells. In this review, the potential strategies for modification of polysaccharides were introduced firstly. It is not only used to functionalize the polysaccharides for the consequent formation of hydrogels, but also used to introduce versatile side groups for the regulation of cell behavior. Then, techniques and underlying mechanisms in inducing the formation of hydrogels by polysaccharides or their derivatives are briefly summarized. Finally, the applications of polysaccharide hydrogels in vivo, mainly focus on the performance for alleviation of foreign-body response (FBR) and as cell scaffolds for tissue regeneration, are exemplified. In addition, the perspectives and challenges for further research are addressed. It aims to provide a comprehensive framework about the potentials and challenges that the polysaccharide hydrogels confronting in tissue engineering.

The Biocompatibility of Multi-Source Stem Cells and Gelatin-Carboxymethyl Chitosan-Sodium Alginate Hybrid Biomaterials

BACKGROUND

Nowadays, biological tissue engineering is a growing field of research. Biocompatibility is a key indicator for measuring tissue engineering biomaterials, which is of great significance for the replacement and repair of damaged tissues.

METHODS

In this study, using gelatin, carboxymethyl chitosan, and sodium alginate, a tissue engineering material scaffold that can carry cells was successfully prepared. The material was characterized by Fourier transforms infrared spectroscopy. In addition, the prepared scaffolds have physicochemical properties, such as swelling ratio, biodegradability. we observed the biocompatibility of the hydrogel to different adult stem cells (BMSCs and ADSCs) in vivo and in vitro. Adult stem cells were planted on gelatin-carboxymethyl chitosan-sodium alginate (Gel/SA/CMCS) hydrogels for 7 days in vitro, and the survival of stem cells in vitro was observed by live/died staining. Gel/SA/CMCS hydrogels loaded with stem cells were subcutaneously transplanted into nude mice for 14 days of in vivo culture observation. The survival of adult stem cells was observed by staining for stem cell surface markers (CD29, CD90) and Ki67.

RESULTS

The scaffolds had a microporous structure with an appropriate pore size (about 80 μm). Live/died staining showed that adult stem cells could stably survive in Gel/SA/CMCS hydrogels for at least 7 days. After 14 days of culture in nude mice, Ki67 staining showed that the stem cells supported by Gel/SA/CMCS hydrogel still had high proliferation activity.

CONCLUSION

Gel/SA/CMCSs hydrogel has a stable interpenetrating porous structure, suitable swelling performance and degradation rate, can promote and support the survival of adult stem cells in vivo and in vitro, and has good biocompatibility. Therefore, Gel/SA/CMCS hydrogel is a strong candidate for biological tissue engineering materials.

Construction of a dual-responsive dual-drug delivery platform based on the hybrids of mesoporous silica, sodium hyaluronate, chitosan and oxidized sodium carboxymethyl cellulose

An intelligent drug delivery platform based on the hybrids of mesoporous silica nanoparticles (MSN), sodium hyaluronate (HA), chitosan (CS) and oxidized sodium carboxymethyl cellulose (oxCMC) is developed, which can be used for dual-responsive dual-drug delivery. Hydrophilic cytarabine (Cyt) is first loaded into the mesopores of the aminated MSN (NH₂-MSN), which is encapsulated by the hydrogel of HA and cystamine (Cys) crosslinked via amidation. The Cyt encapsulated hydrogel which is denoted as Cyt/NH₂-MSN/HA is co-encapsulated with hydrophobic methotrexate (MTX) into the hydrogel of CS and oxCMC resulted from Schiff base reaction. Since the acylhydrazone bonds (-HC=N-) between CS and oxCMC are sensitive to pH and the disulfide bonds (-S-S-) in Cys are sensitive to glutathione (GSH), the resultant dual-drug encapsulated hydrogel, denoted as Cyt/NH₂-MSN/HA/MTX/CS/oxCMC, can be used for dual-responsive (pH and GSH) drug delivery. The results of cell viability demonstrate that the developed dual-drug encapsulated hydrogel has significantly higher efficacy of chemotherapy than that of single-drug (MTX or Cyt) encapsulated hydrogel.

Palladium catalyzed decarboxylative β-C-glycosylation of glycals with oxazol-5-(4H)-ones as acceptors

Palladium catalyzed decarboxylative glycosylation of bicyclic glycals affords a series of C-glycosylated oxazol-5-(4H)-ones with high efficiency and exquisite chemo- and stereoselectivity at the anomeric center under mild reaction conditions.

Engineering immunomodulatory nanoplatforms from commensal bacteria-derived polysaccharide A

Capsular zwitterionic polysaccharides (CZPs), typically found on the surfaces of commensal gut bacteria, are important immunomodulatory molecules due to their ability to produce a T-cell dependent immune response upon processing...

Reprint of: Advanced glycosidases as ingenious biosynthetic instruments

Until recently, glycosidases, naturally hydrolyzing carbohydrate-active enzymes, have found few synthetic applications in industry, being primarily used for cleaving unwanted carbohydrates. With the establishment of glycosynthase and transglycosidase technology by genetic engineering, the view of glycosidases as industrial biotechnology tools has started to change. Their easy production, affordability, robustness, and substrate versatility, added to the possibility of controlling undesired side hydrolysis by enzyme engineering, have made glycosidases competitive synthetic tools. Current promising applications of engineered glycosidases include the production of well-defined chitooligomers, precious galactooligosaccharides or specialty chemicals such as glycosylated flavonoids. Other synthetic pathways leading to human milk oligosaccharides or remodeled antibodies are on the horizon. This work provides an overview of the synthetic achievements to date for glycosidases, emphasizing the latest trends and outlining possible developments in the field.

Multiple-therapy strategies via polysaccharides-based nano-systems in fighting cancer

Polysaccharide-based biomaterials (e.g., chitosan, dextran, hyaluronic acid, chondroitin sulfate and heparin) have received great attention in healthcare, particularly in drug delivery for tumor therapy. They are naturally abundant and available, outstandingly biodegradable and biocompatible, and they generally have negligible toxicity and low immunogenicity. In addition, they are easily chemically or physically modified. Therefore, PSs-based nanoparticles (NPs) have been extensively investigated for the enhancement of tumor treatment. In this review, we introduce the synthetic pathways of amphiphilic PS derivatives, which allow the constructs to self-assemble into NPs with various structures. We especially offer an overview of the emerging applications of self-assembled PSs-based NPs in tumor chemotherapy, photothermal therapy (PTT), photodynamic therapy (PDT), gene therapy and immunotherapy. We believe that this review can provide criteria for a rational and molecular level-based design of PS-based NPs, and comprehensive insight into the potential of PS-based NPs used in multiple cancer therapies.

Modulating the Thermoresponse of Polymer-Protein Conjugates with Hydrogels for Controlled Release

Sustained release is being explored to increase plasma and tissue residence times of polymer-protein therapeutics for improved efficacy. Recently, poly(oligo(ethylene glycol) methyl ether methacrylate) (PEGMA) polymers have been established as potential PEG alternatives to further decrease immunogenicity and introduce responsive or sieving properties. We developed a drug delivery system that locally depresses the lower critical solution temperature (LCST) of PEGMA-protein conjugates within zwitterionic hydrogels for controlled release. Inside the hydrogel the conjugates partially aggregate through PEGMA-PEGMA chain interactions to limit their release rates, whereas conjugates outside of the hydrogel are completely solubilized. Release can therefore be tuned by altering hydrogel components and the PEGMA's temperature sensitivity without the need for traditional controlled release mechanisms such as particle encapsulation or affinity interactions. Combining local LCST depression technology and degradable zwitterionic hydrogels, complete release of the conjugate was achieved over 13 days.

Hyaluronan-based Multifunctional Nano-carriers for Combination Cancer Therapy

Hyaluronan (HA) is a natural linear polysaccharide that has excellent hydrophilicity, biocompatibility, biodegradability, and low immunogenicity, making it one of the most attractive biopolymers used for biomedical researches and applications. Due to the multiple functional sites on HA and its intrinsic affinity for CD44, a receptor highly expressed on various cancer cells, HA has been widely engineered to construct different drug-loading nanoparticles (NPs) for CD44-targeted anti-tumor therapy. When a cocktail of drugs is co-loaded in HA NP, a multifunctional nano-carriers could be obtained, which features as a highly effective and self-targeting strategy to combat cancers with CD44 overexpression. The HA-based multidrug nano-carriers can be a combination of different drugs, various therapeutic modalities, or the integration of therapy and diagnostics (theranostics). Up to now, there are many types of HA-based multidrug nano-carriers constructed by different formulation strategies, including drug co-conjugates, micelles, nano-gels and hybrid NP of HA and so on. This multidrug nano-carrier takes the full advantages of HA as an NP matrix, drug carriers and targeting ligand, representing a simplified and biocompatible platform to realize the targeted and synergistic combination therapy against the cancers. In this review, recent progress of HA-based multidrug nano-carriers for combination cancer therapy is summarized and the potential challenges for translational applications have been discussed.

Direct Access to Polysaccharide-Based Vesicles with a Tunable Membrane Thickness in a Large Concentration Window via Polymerization-Induced Self-Assembly

Polymersomes are multicompartmental vesicular nano-objects obtained by self-assembly of amphiphilic copolymers. When prepared in the aqueous phase, they are composed of a hydrophobic bilayer enclosing water. Although such fascinating polymeric nano-objects have been widely reported with synthetic block copolymers, their formation from polysaccharide-based copolymers remains a significant challenge. In the present study, the powerful platform technology known as polymerization-induced self-assembly was used to prepare in situ pure vesicles from a polysaccharide-grafted copolymer: dextran-g-poly(2-hydroxypropyl methacrylate) (Dex-g-PHPMA). The growth of the PHPMA grafts was performed with a dextran-based macromolecular chain transfer agent in water at 20 °C using photomediated reversible addition fragmentation chain transfer polymerization at 405 nm. Transmission electron microscopy, cryogenic electron microscopy, small-angle X-ray scattering, atomic force microscopy, and dynamic light scattering revealed that amphiphilic Dex-g-PHPMA_{X = 100-300} (X is the targeted average degree of polymerization, X_n̅, of each graft at full conversion) exhibit remarkable self-assembly behavior. On the one hand, vesicles were obtained over a wide range of solid concentrations (from 2.5% to 13.5% w/w), which can facilitate posterior targeting of such rare morphology. On the other hand, the extension of X_n̅ induces an increase in the vesicle membrane thickness, rather than a morphological evolution (spherical micelles to cylinders to vesicles).

Dextran based amphiphilic self-assembled biopolymeric macromolecule synthesized via RAFT polymerization as indomethacin carrier

This work demonstrates a facile pathway to develop a biopolymer based amphiphilic macromolecule through reversible addition-fragmentation chain transfer (RAFT) polymerization, using dextran (a biopolymer) as starting material. Also, a new hydrophobic monomer [2-methyl-acrylic acid 1-benzyl-1H-[1,2,3] triazol-4-ylmethyl ester (MABTE)] has been synthesized using methacrylic acid via "click" approach. The resultant copolymer displays controlled radical polymerization characteristics: narrow polydispersity (Ð) and controlled molecular weight as obtained through advanced polymer chromatography (APC) analysis. In aqueous solution, the copolymer can proficiently be self-assembled to provide micellar structure, which has been evidenced from field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analyses. The in-vitro cytotoxicity study illustrates the nontoxic nature of the copolymer up to 100 μg/mL polymer concentration. The copolymer has been found to be worthy as an efficient carrier for the sustained release of hydrophobic drug: Indomethacin (IND).

Soft matter polysaccharide-based hydrogels as versatile bioengineered platforms for brain tissue repair and regeneration

Acute or chronic brain injuries promote deaths and the life-long debilitating neurological status where, despite advances in therapeutic strategies, clinical outcome hardly achieves total patient recovery. In recent decades, brain tissue engineering emerged as an encouraging area of research for helping in damaged central nervous system (CNS) recovery. Polysaccharides are abundant naturally occurring biomacromolecules with a great potential enhancement of advanced technologies in brain tissue repair and regeneration (BTRR). Besides carrying rich biological information, polysaccharides can interact and communicate with biomolecules, including glycosaminoglycans present in cell membranes and many signaling moieties, growth factors, chemokines, and axon guidance molecules. This review includes a comprehensive investigation of the current progress on designing and developing polysaccharide-based soft matter biomaterials for BTRR. Although few interesting reviews concerning BTRR have been reported, this is the first report specifically focusing on covering multiple polysaccharides and polysaccharide-based functionalized biomacromolecules in this emerging and intriguing field of multidisciplinary knowledge. This review aims to cover the state of art challenges and prospects of this fascinating field while presenting the richness of possibilities of using these natural biomacromolecules for advanced biomaterials in prospective neural tissue engineering applications.

Supramolecular magnetonanohybrids for multimodal targeted therapy of triple-negative breast cancer cells

Despite the undeniable advances in recent decades, cancer remains one of the deadliest diseases of the current millennium, where the triple-negative breast cancer (TNBC) is very aggressive, extremely metastatic, and resistant to conventional chemotherapy. The nanotheranostic approach focusing on targeting membrane receptors often expressed at abnormal levels by cancer cells can be a strategic weapon for fighting malignant tumors. Herein, we introduced a novel "all-in-one nanosoldier" made of colloidal hybrid nanostructures, which were designed for simultaneously targeting, imaging, and killing TNBC cells. These nanohybrids comprised four distinct components: (a) superparamagnetic iron oxide nanoparticles, as bi-functional nanomaterials for inducing ferroptosis via inorganic nanozyme-mediated catalysis and magnetotherapy by hyperthermia treatment; (b) carboxymethyl cellulose biopolymer, as a water-soluble capping macromolecule; (c) folic acid, as the membranotopic vector for targeting folate receptors; (d) and doxorubicin (DOX) drug for chemotherapy. The results demonstrated that this novel strategy was highly effective for targeting and killing TNBC cells in vitro, expressing high levels of folate membrane-receptors. The results evidenced that three integrated mechanisms triggered the deaths of the cancer cells in vitro: (a) ferroptosis, by magnetite nanoparticles inducing a Fenton-like reaction; (b) magneto-hyperthermia effect by generating heat under an alternate magnetic field; and (c) chemotherapy, through the DOX intracellular release causing DNA dysfunction. This "all-in-one nanosoldier" strategy offers a vast realm of prospective alternatives for attacking cancer cells, combining multimodal therapy and the delivery of therapeutic agents to diseased sites and preserving healthy cells, which is one of the most critical clinical challenges faced in fighting drug-resistant breast cancers.

Advanced glycosidases as ingenious biosynthetic instruments

Until recently, glycosidases, naturally hydrolyzing carbohydrate-active enzymes, have found few synthetic applications in industry, being primarily used for cleaving unwanted carbohydrates. With the establishment of glycosynthase and transglycosidase technology by genetic engineering, the view of glycosidases as industrial biotechnology tools has started to change. Their easy production, affordability, robustness, and substrate versatility, added to the possibility of controlling undesired side hydrolysis by enzyme engineering, have made glycosidases competitive synthetic tools. Current promising applications of engineered glycosidases include the production of well-defined chitooligomers, precious galactooligosaccharides or specialty chemicals such as glycosylated flavonoids. Other synthetic pathways leading to human milk oligosaccharides or remodeled antibodies are on the horizon. This work provides an overview of the synthetic achievements to date for glycosidases, emphasizing the latest trends and outlining possible developments in the field.

In silico design and pharmacological evaluation of conjugates of atenolol with modified saccharide for cardiovascular targeting

Amongst a wide range of biological macromolecules, saccharides exhibit the potential to be specifically recognized by cell-surface receptors and hence can be utilized as ligands in targeted drug delivery. The current study aims to use saccharides viz. Galactose, Pectin and Chitosan to improve targeting of Atenolol by oxalyl chloride mediated grafting. Conjugates were engineered by grafting Atenolol, a cardiovascular agent with the modified saccharide units. The conjugates were characterized by FTIR, DSC and ¹H NMR study. Drug release analysis and cellular uptake study was carried out using H9c2 cell lines which represent that concentration of drug in cells treated with all atenolol-saccharide conjugates is enhanced by almost two-folds in comparison with cells treated with atenolol solution. Thus cell line study confers the evidence of selective cardiac delivery. No significant cytotoxicity was observed in case of all synthesized conjugates in the Brine shrimp lethality bioassay. Possible binding of the developed conjugates with the GLUT-4 receptors was assessed by in silico analysis using homology model developed by Swiss Model server. Hence it was concluded that the application of these conjugates with saccharides in selective cardiovascular drug delivery can be a promising approach to increase bioavailability, minimize drug loss by degradation and prevent harmful side effects by increasing specific cell targeting.

Enhanced heat stability and antioxidant activity of myofibrillar protein-dextran conjugate by the covalent adduction of polyphenols

In the present study, three types of polyphenols, namely, (-)-epigallocatechin-3-gallate (EGCG), catechin (C), and gallic acid (GA), were grafted to myofibrillar protein (MP)-dextran (DX) conjugate through a free radical-mediated adduction method. The analysis of secondary structure showed that conjugation of polyphenols induced a decrease in contents of α-helix structures. The surface hydrophobicity of MP-DX conjugate was increased after polyphenols were covalently adducted, while that of the free amino, thiol groups, and tyrosine residues were decreased, especially with the addition of EGCG (p < 0.05). Analysis of rheological properties showed that covalently linking of polyphenols decreased the thermal gelling capacity by inhibiting myosin-head aggregation and myosin tails interaction. Moreover, polyphenol adduction was able to remarkably improve the thermal stability and antioxidant activity of MP-DX conjugate. The findings regarding enhanced functionalities evidence potential of applying the ternary adduct as a novel antioxidant.

Doxorubicin delivery systems based on doped CaCO3 cores and polyanion drug conjugates

In order to prolong the release and reduce the toxicity of anticancer drug - doxorubicin (DOX), delivery systems (DS) using different polyanions have been developed. Structural (size, morphological stability) and functional (encapsulation efficiency, DOX release) characteristics of three types of DS are compared: CaCO₃ porous vaterites doped with polyanions by co-precipitation and coating techniques, and DOX-polyanion conjugates. Using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), it was shown that the doping enhances the morphological stability of CaCO₃-based DS during the DOC loading. Doping of CaCO₃ cores by co-precipitation reduces its sizes (up to 1 µm) and DOX encapsulation efficiency. Polyanion-coated CaCO₃ cores and polyanion drug conjugates show about 98 w/w% DOX encapsulation. For the first time, it was shown that the release of DOX from developed DS into human blood plasma is more intense (from 1.3 to 3.0 times for different DS) than into model tumour environment.

Bioresorbable Polymers: Advanced Materials and 4D Printing for Tissue Engineering

Three-dimensional (3D) printing is a valuable tool in the production of complexes structures with specific shapes for tissue engineering. Differently from native tissues, the printed structures are static and do not transform their shape in response to different environment changes. Stimuli-responsive biocompatible materials have emerged in the biomedical field due to the ability of responding to other stimuli (physical, chemical, and/or biological), resulting in microstructures modifications. Four-dimensional (4D) printing arises as a new technology that implements dynamic improvements in printed structures using smart materials (stimuli-responsive materials) and/or cells. These dynamic scaffolds enable engineered tissues to undergo morphological changes in a pre-planned way. Stimuli-responsive polymeric hydrogels are the most promising material for 4D bio-fabrication because they produce a biocompatible and bioresorbable 3D shape environment similar to the extracellular matrix and allow deposition of cells on the scaffold surface as well as in the inside. Subsequently, this review presents different bioresorbable advanced polymers and discusses its use in 4D printing for tissue engineering applications.

Tissue Adhesives: From Research to Clinical Translation

Sutures, staples, clips and skin closure strips are used as the gold standard to close wounds after an injury. In spite of being the present standard of care, the utilization of these conventional methods is precarious amid complicated and sensitive surgeries such as vascular anastomosis, ocular surgeries, nerve repair, or due to the high-risk components included. Tissue adhesives function as an interface to connect the surfaces of wound edges and prevent them from separation. They are fluid or semi-fluid mixtures that can be easily used to seal any wound of any morphology - uniform or irregular. As such, they provide alternatives to new and novel platforms for wound closure methods. In this review, we offer a background on the improvement of distinctive tissue adhesives focusing on the chemistry of some of these products that have been a commercial success from the clinical application perspective. This review is aimed to provide a guide toward innovation of tissue bioadhesive materials and their associated biomedical applications.

Electrospun fibers based on botanical, seaweed, microbial, and animal sourced biomacromolecules and their multidimensional applications

This review summarizes and broadly classifies all of the major sustainable natural carbohydrate bio-macromolecular manifestations in nature - from botanical (cellulose, starch, and pectin), seaweed (alginate, carrageenan, and agar), microbial (bacterial cellulose, dextran, and pullulan), and animal (hyaluronan, heparin, chitin, and chitosan) sources - that have been contrived into electrospun fibers. Furthermore, a relative study of these biomaterials for the fabrication of nanofibers by electrospinning and their characteristics viz. solution behavior, blending nature, as well as rheological and fiber attributes are discussed. The potential multidimensional applications of nanofibers (filtration, antimicrobial, biosensor, gas sensor, energy storage, catalytic, and tissue engineering) originating from these polysaccharides and their major impacts on the properties, functionalities, and uses of these electrospun fibers are compared and critically examined.

An AIE-driven fluorescent polysaccharide polymersome as an enzyme-responsive FRET nanoprobe to study the real-time delivery aspects in live cells

An enzyme-responsive FRET nanoprobe was designed and developed based on AIE-driven fluorescent polysaccharide polymersomes to study the real-time delivery aspects in the intracellular compartments in live cancer cells.

Chemical Tuning of Fibers Drawn from Extensible Hyaluronic Acid Networks

Polymer fibers with specific chemical and mechanical properties are key components of many biomaterials used for regenerative medicine and drug delivery. Here, we develop a bioinspired, low-energy process to produce mechanically tunable biopolymer fibers drawn from aqueous solutions. Hyaluronic acid (HA) forms dynamic cross-links with branched polyethylene glycol polymers end-functionalized with boronic acids of varied structure to produce extensible polymer networks. This dynamic fiber precursor (DFP) is directly drawn by pultrusion into HA fibers that display high aspect ratios, ranging from 4 to 20 μm in diameter and up to ∼10 m in length. Dynamic rheology measurements of the DFP and tensile testing of the resulting fibers reveal design considerations to tune the propensity for fiber formation and fiber mechanical properties, including the effect of polymer structure and concentration on elastic modulus, tensile strength, and ultimate strain. The materials' humidity-responsive contractile behavior, a unique property of spider silks rarely observed in synthetic materials, highlights possibilities for further biomimetic and stimulus-responsive fiber applications. This work demonstrates that chemical modification of dynamic interactions can be used to tune the mechanical properties of pultrusion-based fibers and their precursors.

Biomass-Derived Multilayer-Structured Microparticles for Accelerated Hemostasis and Bone Repair

It is very desirable to develop advanced sustainable biomedical materials with superior biosafety and bioactivity for clinical applications. Herein, biomass-derived multilayer-structured absorbable microparticles (MQ x T y ) composed of starches and plant polyphenols are readily constructed for the safe and effective treatment of bone defects with intractable bleeding by coating multiple layers of quaternized starch (Q+) and tannic acid onto microporous starch microparticles via facile layer-by-layer assembly. MQ x T y microparticles exhibit efficient degradability, low cytotoxicity, and good blood compatibility. Among various MQ x T y microparticles with distinct Q+/T- double layers, MQ2T2 with outmost polyphenol layer possess the unique properties of platelet adhesion/activation and red blood cell aggregation, resulting in the best hemostatic performance. In a mouse cancellous-bone-defect model, MQ2T2 exhibits the favorable hemostatic effect, low inflammation/immune responses, high biodegradability, and promoted bone repair. A proof-of-concept study of beagles further confirms the good performance of MQ2T2 in controlling intractable bleeding of bone defects. The present work demonstrates that such biomass-based multilayer-structured microparticles are very promising biomedical materials for clinical use.