Immobilization of l-Asparaginase on Carrier Materials: A Comprehensive Review

Mimicomes: Mimicking Multienzyme System by Artificial Design

Enzymes are widely distributed in organelles of cells, which are capable of carrying out specific catalytic reactions. In general, several enzymes collaborate to facilitate complex reactions and engage in vital biochemical processes within cells, which are also called cascade systems. The cascade systems are highly efficient, and their dysfunction is associated with a multitude of endogenous diseases. The advent of nanotechnology makes it possible to mimic these cascade systems in nature and realize partial functions of natural biological processes both in vitro and in vivo. To emphasize the significance of artificial cascade systems, mimicomes is first proposed, a new concept that refers to the artificial cascade catalytic systems. Typically, mimicomes are able to mimic specific natural biochemical catalytic processes or facilitate the overall catalytic efficiency of cascade systems. Subsequently, the evolution and development of different types of mimicomes in recent decades are elucidated exhaustedly, from the natural enzyme-based mimicomes (immobilized enzyme and vesicle mimicomes) to the nanozyme-based mimicomes and enzyme-nanozyme hybrid mimicomes. In conclusion, the remaining challenges in the design of multifunctional mimicomes and their potential applications are summarized, offering insights into their future prospects.

Improved L-Asparaginase Properties and Reusability by Immobilization onto Functionalized Carbon Xerogels

Enzyme immobilization can offer a range of significant advantages, including reusability, and increased selectivity, stability, and activity. In this work, a central composite design (CCD) of experiments and response surface methodology (RSM) were used to study, for the first time, the L-asparaginase (ASNase) immobilization onto functionalized carbon xerogels (CXs). The best results were achieved using CXs obtained by hydrothermal oxidation with nitric acid and subsequent heat treatment in a nitrogen flow at 600 °C (CX-OX-600). Under the optimal conditions (81 min of contact time, pH 6.2 and 0.36 g/L of ASNase), an immobilization yield (IY) of 100 % and relative recovered activity (RRA) of 103 % were achieved. The kinetic parameters obtained also indicate a 1.25-fold increase in the affinity of ASNase towards the substrate after immobilization. Moreover, the immobilized enzyme retained 97 % of its initial activity after 6 consecutive reaction cycles. All these outcomes confirm the promising properties of functionalized CXs as support for ASNase, bringing new insights into the development of an efficient and stable immobilization platform for use in the pharmaceutical industry, food industry, and biosensors.

L-Asparaginase Conjugates from the Hyperthermophilic Archaea Thermococcus sibiricus with Improved Biocatalytic Properties

This study investigated the effect of polycationic and uncharged polymers (and oligomers) on the catalytic parameters and thermostability of L-asparaginase from Thermococcus sibiricus (TsA). This enzyme has potential applications in the food industry to decrease the formation of carcinogenic acrylamide during the processing of carbohydrate-containing products. Conjugation with the polyamines polyethylenimine and spermine (PEI and Spm) or polyethylene glycol (PEG) did not significantly affect the secondary structure of the enzyme. PEG contributes to the stabilization of the dimeric form of TsA, as shown by HPLC. Furthermore, neither polyamines nor PEG significantly affected the binding of the L-Asn substrate to TsA. The conjugates showed greater maximum activity at pH 7.5 and 85 °C, 10-50% more than for native TsA. The pH optima for both TsA-PEI and TsA-Spm conjugates were shifted to lower pH ranges from pH 10 (for the native enzyme) to pH 8.0. Additionally, the TsA-Spm conjugate exhibited the highest activity at pH 6.5-9.0 among all the samples. Furthermore, the temperature optimum for activity at pH 7.5 shifted from 90-95 °C to 80-85 °C for the conjugates. The thermal inactivation mechanism of TsA-PEG appeared to change, and no aggregation was observed in contrast to that of the native enzyme. This was visually confirmed and supported by the analysis of the CD spectra, which remained almost unchanged after heating the conjugate solution. These results suggest that TsA-PEG may be a more stable form of TsA, making it a potentially more suitable option for industrial use.

Recent trends in targeted delivery of smart nanocarrier-based microbial enzymes for therapeutic applications

Smart carrier-based immobilization has widened the use of enzymes for the treatment of several disorders. Large surface areas, tunable morphology, and surface modification ability aid the targeted and controlled release of therapeutic enzymes from such formulations. Smart nanocarriers, such as polymeric carriers, liposomes, and silica have also increased the stability, half-life, and permeability of these enzymes. In this review, summarize recent advances in the smart immobilization of microbial enzymes and their development as precision nanomedicine for the treatment of cancer, thrombosis, phenylketonuria (PKU), and wound healing. We also discuss the challenges and measures to be adopted for the successful clinical translation of these formulations.

Enhancement of enzyme activity by laser-induced energy propulsion of upconverting nanoparticles under near-infrared light: A comprehensive methodology for in vitro and in vivo applications

If the appropriate immobilization method and carrier support are not selected, partial decreases in the activity of enzymes may occur after immobilization. Herein, to overcome this challenge, an excitation mechanism that enables energy transfer was proposed. Modified upconverting nanoparticles (UCNPs) were constructed and the important role of near-infrared (NIR) excitation in enhancing the catalytic activity of the enzyme was demonstrated. For this purpose, UCNPs were first synthesized via the hydrothermal method, functionalized with isocyanate groups, and then, PEG-L-ASNase was immobilized via covalent binding. UCNPs with and without PEG-L-ASNase were extensively characterized by different methods. These supports had immobilization yield and activity efficiency of >96 % and 78 %, respectively. Moreover, immobilized enzymes exhibited improved pH, thermal, and storage stability. In addition, they retained >65 % of their initial activity even after 20 catalytic cycles. Biochemical and histological findings did not indicate a trend of toxicity in rats due to UCNPs. Most importantly, PEG-L-ASNase activity was triggered approximately 5- and 2-fold under in vitro and in vivo conditions, respectively. Overall, it is anticipated that this pioneering work will shed new light on the realistic and promising usage of NIR-excited UCNPs for the immobilization of enzymes in expensive and extensive applications.

Immobilization of l-asparaginase on chitosan nanoparticles for the purpose of long-term application

Asparaginase holds significant commercial value as an enzyme in the food and pharmaceutical industries. This study examined the optimum and practical use of the l-asparaginase derived from Pseudomonas aeruginosa HR03. Specifically, the study focused on the effectiveness of the stabilized enzyme when applied to chitosan nanoparticles. The structure, size, and morphology of chitosan nanoparticles were evaluated in relation to the immobilization procedure. This assessment involved the use of several analytical techniques, including FT-IR, DLS, SEM, TEM, and EDS analysis. Subsequently, the durability of the enzyme that has been stabilized was assessed by evaluating its effectiveness under extreme temperatures of 60 and 70 °C, as well as at pH values of 3 and 12. The findings indicate that incorporating chitosan nanoparticles led to enhanced immobilization of the l-asparaginase enzyme. This improvement was observed in terms of long-term stability, stability under crucial temperature and pH conditions, as well as thermal stability. In addition, the optimum temperature increased from 40 to 50 °C, and the optimum pH increased from 8 to 9. Enzyme immobilization led to an increase in Km and a decrease in kcat compared to its free counterpart. Because of its enhanced long-term stability, l-asparaginase immobilization on chitosan nanoparticles may be a potential choice for use in industries that rely on l-asparaginase enzymes, particularly the pharmaceutical and food industries.

L-Asparaginase delivery systems targeted to minimize its side-effects

L-asparaginase (L-ASP) is one of the key enzymes used in therapeutic applications, particularly to treat Acute Lymphocytic Leukemia (ALL). L-asparagine is a non-essential amino acid, which means that it can be synthesized by the body and is not required to be obtained through the diet. The synthesis of L-asparagine occurs primarily in the liver, but it also takes place in other tissues throughout the body. In contrast, leukemic cells cannot synthesize L-asparagine due the absence of L-asparagine synthetase and should obtain it from circulating sources for protein synthesis and cell division processes to ensure their vital functions. L-ASP catalyzes the deamination process of L-asparagine amino-acid into aspartic acid and ammonia, depriving leukemic cells of asparagine. This leads to decreased protein synthesis and cell division in tumor cells. However, using L-ASP has side effects, such as hypersensitivity or allergic reaction, antigenicity, short half-life, temporary blood clearance, and toxicity. L-ASP immobilization can minimize the side effects of L-ASP by stopping the immune system from attacking non-human enzymes and improving the enzyme's performance. The first strategy includes modification of enzyme structure, such as covalent binding (conjugation), adsorption to the support material and cross-linking of the enzyme. The chemical modification of residues, often nonspecific, changes the enzyme's hydrophobicity and surface charge, lowering the enzyme's activity. Also, the first strategy exposes the enzyme's surface to the environment. This eliminates its performance and does not allow targeted delivery of the enzyme. The second strategy is based on the entrapment of the enzyme inside the protecting structure or encapsulation. This strategy offers the same benefits as the first. Still, it also enables reducing toxicity, prolonging in vivo half-life, enhancing stability and activity, enables a targeted delivery and controlled release of the enzyme. Compared to the first strategy, encapsulation does not modify the chemical structure of the enzyme since L-ASP is only effective against leukemia in its native tetrameric form. This review aims to present state of the art in L-ASP formulations developed for reducing the side effects of L-ASP, focusing on describing improvements in their safety. The primary focus in the field remains to be improving the overall performance of the L-ASP formulations. Almost all encapsulation systems allow reducing immune response due to screening the enzyme from antibodies and prolonging its half-life. However, the enzyme's activity and stability depend on the encapsulation system type. Therefore, the selection of the right encapsulation system is crucial in therapy due to its effect on the performance parameters of the L-ASP. Biodegradable and biocompatible materials, such as chitosan, alginate and liposomes, mainly attract the researcher's interest in enzyme encapsulation. The research trends are also moving towards developing formulations with targeted delivery and increased selectivity.

L-asparaginase immobilization in supramolecular nanogels of PEG-grafted poly HPMA and bis(α-cyclodextrin) to enhance pharmacokinetics and lower enzyme antigenicity

L-asparaginase (ASNase) enzyme has limited therapeutic use due to its poor pharmacokinetics and immunogenicity. To overcome these obstacles, we immobilized ASNase in biocompatible poly hydroxypropyl methacrylamide (P(HPMA))-based nanogels simply formed through the host-guest inclusion complex of ASNase-conjugated random copolymer of HPMA and polyethylene glycol (PEG) acrylate (P(HPMA-MPEGA)) and α-cyclodextrin dimer (bisCD) using cystamine as a linker. The effects of bisCD and polymer concentrations on particle size, gelation time, and recovery of enzyme activity were investigated. The ASNase-conjugated bisCD nanogels were discrete, homogeneous, and spherical with a mean projected diameter of 148 ± 41 nm. ASNase immobilized in the bisCD nanogels caused cytotoxicity on HL-60 cell line with IC₅₀ of 3 IU/ml. In-vivo rat study revealed that the immobilized ASNase reduced the enzyme antigenicity and resulted in 8.1 folds longer circulation half-life than the native enzyme. Conclusively, immobilization of ASNase in P(HPMA-MPEGA) and bisCD supramolecular nanogels could enhance the therapeutic value of ASNase in cancer chemotherapy.

Co-Encapsulation of l-Asparaginase and Etoposide in Dextran Nanoparticles for Synergistic Effect in Chronic Myeloid Leukemia Cells

Co-encapsulation of multiple therapeutic drugs in a single nanocarrier has the potential to enable synergistic interactions, increase drug efficacy, and reduce side effects. The enzyme l-asparaginase and the small molecule drug etoposide have a known synergistic effect against selected cancer types. However, both drugs differ significantly in size, molecular weight, and solubility, which often results in challenges when a simultaneous delivery is required. In this study, we present the co-encapsulation of a large hydrophilic enzyme l-asparaginase and the small hydrophobic drug etoposide into a biodegradable, biocompatible, and acid-responsive dextran-based nanoparticle system. These dual drug-loaded nanoparticles show an excellent cellular uptake in chronic myeloid leukemia (CML) K562 cells and a stepwise release of the cytotoxic payloads in a pH-dependent manner. In activity tests, the dual drug-loaded formulation has shown a significant effect on cell viability (down to 31%) compared to those incubated only with l-asparaginase (92%) or etoposide (82%) at a particle concentration of 125 μg∙mL^-1. These results show that the simultaneous co-delivery of these two drugs in K562 cells leads to synergistic cytotoxicity, indicating a great potential for the treatment of CML.

Immobilization and Characterization of L-Asparaginase over Carbon Xerogels

L-asparaginase (ASNase) is an aminohydrolase currently used in the pharmaceutical and food industries. Enzyme immobilization is an exciting option for both applications, allowing for a more straightforward recovery and increased stability. High surface area and customizable porosity make carbon xerogels (CXs) promising materials for ASNase immobilization. This work describes the influence of contact time, pH, and ASNase concentration on the immobilization yield (IY) and relative recovered activity (RRA) using the Central Composite Design methodology. The most promising results were obtained using CX with an average pore size of 4 nm (CX-4), reaching IY and RRA of 100%. At the optimal conditions (contact time 49 min, pH 6.73, and [ASNase] 0.26 mg·mL⁻¹), the ASNase-CXs biocomposite was characterized and evaluated in terms of kinetic properties and operational, thermal, and pH stabilities. The immobilized ASNase onto CX-4 retained 71% of its original activity after six continuous reaction cycles, showed good thermal stability at 37 °C (RRA of 91% after 90 min), and was able to adapt to both acidic and alkaline environments. Finally, the results indicated a 3.9-fold increase in the immobilized ASNase affinity for the substrate, confirming the potential of CXs as a support for ASNase and as a cost-effective tool for subsequent use in the therapeutic and food sectors.

Encapsulation of Asparaginase as a Promising Strategy to Improve In Vivo Drug Performance

Asparaginase (ASNase) is a widely applied chemotherapeutic drug that is used to treat Acute Lymphoblastic Leukemia (ALL); however, immune responses and silent inactivation of the drug often limit its bioavailability. Many strategies have been proposed to overcome these drawbacks, including the development of improved formulations (biobetters), but only two of them are currently on the market. Nano- and micro-encapsulation are some of the most promising and novel approaches to enhance in vivo performance of ASNase, preventing the direct contact of the enzyme with the environment, protecting it from protease degradation, increasing the enzymes catalytic half-life, and in some cases, reducing immunogenicity. This review summarizes the strategies, particularly for ASNase nano- and micro-encapsulation, and their main findings, constraints, and current gaps in the state-of-the-art knowledge. The pros and cons of the use of different nanocarriers are discussed with the idea to ultimately provide safer and more effective treatments for patients with ALL.

Superior operational stability of immobilized L-asparaginase over surface-modified carbon nanotubes

L-asparaginase (ASNase, EC 3.5.1.1) is an enzyme that catalyzes the L-asparagine hydrolysis into L-aspartic acid and ammonia, being mainly applied in pharmaceutical and food industries. However, some disadvantages are associated with its free form, such as the ASNase short half-life, which may be overcome by enzyme immobilization. In this work, the immobilization of ASNase by adsorption over pristine and modified multi-walled carbon nanotubes (MWCNTs) was investigated, the latter corresponding to functionalized MWCNTs through a hydrothermal oxidation treatment. Different operating conditions, including pH, contact time and ASNase/MWCNT mass ratio, as well as the operational stability of the immobilized ASNase, were evaluated. For comparison purposes, data regarding the ASNase immobilization with pristine MWCNT was detailed. The characterization of the ASNase-MWCNT bioconjugate was addressed using different techniques, namely Transmission Electron Microscopy (TEM), Thermogravimetric Analysis (TGA) and Raman spectroscopy. Functionalized MWCNTs showed promising results, with an immobilization yield and a relative recovered activity of commercial ASNase above 95% under the optimized adsorption conditions (pH 8, 60 min of contact and 1.5 × 10-3 g mL-1 of ASNase). The ASNase-MWCNT bioconjugate also showed improved enzyme operational stability (6 consecutive reaction cycles without activity loss), paving the way for its use in industrial processes.

Tailor-made shape memory stents for therapeutic enzymes: A novel approach to enhance enzyme performance

Herein, our suggestion is to immobilize enzymes in-situ on absorbable shape-memory stents instead of injecting therapeutic enzymes into the blood. Chitosan (CHI)-based stents were tailored as novel support and the enzyme-immobilizing ability was elucidated using L-asparaginase (L-ASNase). For developing shape-memory stents, CHI-glycerol (GLY) solution was prepared and further blended with different ratios of polyethylene glycol (PEG), and polyvinyl alcohol (PVA). Afterward, the blends were modified by ionic crosslinking with sodium tripolyphosphate to obtain a shape-memory character. L-ASNase was included in the blends by using in-situ method before ionic crosslinking. The prepared stents, with or without L-ASNase, were comprehensively characterized by using several techniques. Collectively, immobilized L-ASNase exhibited much better performance in immobilization parameters than free one, thanks to its improved stability and reusability. For instance, CHI/GLY/PEG-3@L-ASNase retained about 70% of the initial activity after storage at 30 °C for 2 weeks, whereas the free form lost half of its initial activity. Besides, it retained 73.4% residual activity after 15 consecutive cycles. Most importantly, stent formulations exhibited ~60% activity in the bioreactor system after 4 weeks of incubation. Given the above results, shape-memory stents can be a promising candidate as a new platform for immobilization, especially in the blood circulation system.

Highly enhanced activity and stability via affinity induced immobilization β-glucosidase from Aspergillus niger onto amino-based silica for the biotransformation of ginsenoside Rb1

In this study, an enzyme immobilization method for the effective biotransformation of ginsenoside Rb1 to impart activity and stability was developed. Using a hydrolase enzyme model, β-glucosidase from Aspergillus niger, immobilization within chemically affinity-linked amino-based silica provided an immobilization efficiency 5.86-fold higher than that of free enzyme. Compared with the free enzyme, the immobilized enzyme functioned optimally at a wider pH range and had higher thermostability. The optimum pH for the free and immobilized enzymes was 5.5. The optimal reaction temperature of the immobilized enzyme was 45 °C, which was 5 °C higher than that of the free enzyme. The Michaelis constant (K_m) values before and after immobilization were 0.482 mmol•L^-1 and 0.387 mmol•L^-1, respectively. The catalytic rate (K_cat) for the immobilized and free enzymes was 22.269 mmol•L^-1and 8.800 mmol•L^-1, respectively, and the catalytic efficiency (K_cat/K_m) activity of the immobilized enzyme was 3.30-fold higher than that of the free enzyme. The immobilized enzyme could preserve 97 % of the activity after 45 cycles of repeated use. The high catalytic activity and significant operational stability are beneficial for industrial applications.

Asparaginase-Phage P22 Nanoreactors: Toward a Biobetter Development for Acute Lymphoblastic Leukemia Treatment

Asparaginase (ASNase) is a biopharmaceutical for Acute Lymphoblastic Leukemia (ALL) treatment. However, it shows undesirable side effects such as short lifetimes, susceptibility to proteases, and immunogenicity. Here, ASNase encapsidation was genetically directed in bacteriophage P22-based virus-like particles (VLPs) (ASNase-P22 nanoreactors) as a strategy to overcome these challenges. ASNase-P22 was composed of 58.4 ± 7.9% of coat protein and 41.6 ± 8.1% of tetrameric ASNase. Km and Kcat values of ASNase-P22 were 15- and 2-fold higher than those obtained for the free enzyme, respectively. Resulting Kcat/Km value was 2.19 × 10⁵ M⁻¹ s⁻¹. ASNase-P22 showed an aggregation of 60% of the volume sample when incubated at 37 °C for 12 days. In comparison, commercial asparaginase was completely aggregated under the same conditions. ASNase-P22 was stable for up to 24 h at 37 °C, independent of the presence of human blood serum (HBS) or whether ASNase-P22 nanoreactors were uncoated or PEGylated. Finally, we found that ASNase-P22 caused cytotoxicity in the leukemic cell line MOLT-4 in a concentration dependent manner. To our knowledge, this is the first work where ASNase is encapsulated inside of VLPs, as a promising alternative to fight ALL.

Recent Strategies and Applications for l-Asparaginase Confinement

l-asparaginase (ASNase, EC 3.5.1.1) is an aminohydrolase enzyme with important uses in the therapeutic/pharmaceutical and food industries. Its main applications are as an anticancer drug, mostly for acute lymphoblastic leukaemia (ALL) treatment, and in acrylamide reduction when starch-rich foods are cooked at temperatures above 100 °C. Its use as a biosensor for asparagine in both industries has also been reported. However, there are certain challenges associated with ASNase applications. Depending on the ASNase source, the major challenges of its pharmaceutical application are the hypersensitivity reactions that it causes in ALL patients and its short half-life and fast plasma clearance in the blood system by native proteases. In addition, ASNase is generally unstable and it is a thermolabile enzyme, which also hinders its application in the food sector. These drawbacks have been overcome by the ASNase confinement in different (nano)materials through distinct techniques, such as physical adsorption, covalent attachment and entrapment. Overall, this review describes the most recent strategies reported for ASNase confinement in numerous (nano)materials, highlighting its improved properties, especially specificity, half-life enhancement and thermal and operational stability improvement, allowing its reuse, increased proteolysis resistance and immunogenicity elimination. The most recent applications of confined ASNase in nanomaterials are reviewed for the first time, simultaneously providing prospects in the described fields of application.

Recent advances on porous interfaces for biomedical applications

Porous structures on solid surfaces prepared artificially through the water droplet template method have the features of easy operation, low cost and self-removal of templates, and thus are widely applied in the fields of medicine, biomedicine, adsorption, catalysis, and separation, optical and electronic materials. Due to their tunable dimensions, abundant selection of materials, mechanical stability, high porosity, and enlarged pore surface, the formed porous interfaces show specific significance in bio-related systems. In this study, recent achievements related to applications of porous interfaces and a focus into biological and medical-related systems are summarized. The discussion involves the preparation of porous interfaces, and porous interface-induced cell behaviors including culture, growth, proliferation, adhesion, and differentiation of cells. The inhibitory effect of bacteria and separated features of microorganisms supported by porous interfaces, the immobilization of biomolecules related to proteins, DNA and enzymes, and the controllable drug delivery are also discussed. The summary of recent advances pointed out in the study, are suggestive of insights for motivating unique potential applications including their extension to porous interfaces in biomedical materials.

Chemistry, Structures, and Advanced Applications of Nanocomposites from Biorenewable Resources

Researchers have recently focused on the advancement of new materials from biorenewable and sustainable sources because of great concerns about the environment, waste accumulation and destruction, and the inevitable depletion of fossil resources. Biorenewable materials have been extensively used as a matrix or reinforcement in many applications. In the development of innovative methods and materials, composites offer important advantages because of their excellent properties such as ease of fabrication, higher mechanical properties, high thermal stability, and many more. Especially, nanocomposites (obtained by using biorenewable sources) have significant advantages when compared to conventional composites. Nanocomposites have been utilized in many applications including food, biomedical, electroanalysis, energy storage, wastewater treatment, automotive, etc. This comprehensive review provides chemistry, structures, advanced applications, and recent developments about nanocomposites obtained from biorenewable sources.

Cytomembrane-mimicking nanocarriers with a scaffold consisting of a CD44-targeted endogenous component for effective asparaginase supramolecule delivery

Highly effective and safe delivery of therapeutic enzymes is pivotal to the success of antitumor therapy. Herein, we report on a targeted enzyme delivery system based on cytomembrane-mimicking nanocarriers (CmN) and a supramolecular technique (SmT). Specifically, each CmN had a scaffold that mainly consisted of a CD44-targeted endogenous component conjugated with polyethylene glycol 2000 (HA-g-PEG) that self-assembled with α-cyclodextrin (ACD). The CmN acted as a microbioreactor with an inner hollow space with the capacity to confine the large molecule asparaginase (Asp) in an Asp/ACD-supramolecular complex conjugated to the inner region. The supramolecular Asp loaded into the CmN (A-S-CmN) exhibited superior stability, kinetic properties, catalytic activity and antitumor effects compared to free Asp due to the dual protection of the supramolecular complex and the nanovesicle, the CD44 targeting-homing ability, the prolonged effects of HA-g-PEG, and the favorable inner microenvironment of the constructed supramolecular CmN. The A-S-CmN also showed a decrease in in vivo toxicity and immunogenicity. CmN combined with SmT therapeutics are easy to implement and extend for use in the delivery of various enzymes and for many types of cancer treatment.

FTIR-based L-asparaginase activity assay enables continuous measurements in optically dense media including blood plasma

Complex heterogeneous systems, such as micelles or blood plasma, represent a particularly challenging environment to measure the catalytic parameters of some enzymes, including l-asparaginase. Existing methods are strongly interfered by the presence of plasma proteins, amino acids, as well as other components of plasma. Here we show that FTIR spectroscopy enables continuous real-time measurement of catalytic activity of l-asparaginase, in native and in PEG-chitosan conjugated form, in aqueous solutions as well as in heterogeneous non-transparent multicomponent systems, including colloidal systems or blood plasma, with minimal or no sample preparation. The approach developed is potentially applicable to other enzymatic reactions where the spectroscopic properties of substrate and product do not allow direct measurement with absorption or fluorescence spectroscopy.

A comprehensive review on microbial l-asparaginase: Bioprocessing, characterization, and industrial applications

l-Asparaginase (E.C.3.5.1.1.) is a vital enzyme that hydrolyzes l-asparagine to l-aspartic acid and ammonia. This property of l-asparaginase inhibits the protein synthesis in cancer cells, making l-asparaginase a mainstay of pediatric chemotherapy practices to treat acute lymphoblastic leukemia (ALL) patients. l-Asparaginase is also recognized as one of the important food processing agent. The removal of asparagine by l-asparaginase leads to the reduction of acrylamide formation in fried food items. l-Asparaginase is produced by various organisms including animals, plants, and microorganisms, however, only microorganisms that produce a substantial amount of this enzyme are of commercial significance. The commercial l-asparaginase for healthcare applications is chiefly derived from Escherichia coli and Erwinia chrysanthemi. A high rate of hypersensitivity and adverse reactions limits the long-term clinical use of l-asparaginase. Present review provides thorough information on microbial l-asparaginase bioprocess optimization including submerged fermentation and solid-state fermentation for l-asparaginase production, downstream purification, its characterization, and issues related to the clinical application including toxicity and hypersensitivity. Here, we have highlighted the bioprocess techniques that can produce improved and economically viable yields of l-asparaginase from promising microbial sources in the current scenario where there is an urgent need for alternate l-asparaginase with less adverse effects.

Insights into the Microbial L-Asparaginases: from Production to Practical Applications

L-asparaginase is a valuable protein therapeutic drug utilized for the treatment of leukemia and lymphomas. Administration of asparaginase leads to asparagine starvation causing inhibition of protein synthesis, growth, and proliferation of tumor cells. Besides its clinical significance, the enzyme also finds application in the food sector for mitigation of a cancer-causing agent acrylamide. The numerous applications ensue huge market demands and create a continued interest in the production of costeffective, more specific, less immunogenic and stable formulations which can cater both the clinical and food processing requirements. The current review article approaches the process parameters of submerged and solid-state fermentation strategies for the microbial production of the L-asparaginase from diverse sources, genetic engineering approaches used for the production of L-asparaginase enzyme and major applications in clinical and food sectors. The review also addresses the immunological issues associated with the L-asparaginase usage and the immobilization strategies, drug delivery systems employed to circumvent the toxicity complications are also discussed. The future prospects for microbial Lasparaginase production are discussed at the end of the review article.

Enzyme Reactor Based on Reversible pH-Controlled Catalytic Polymer Porous Membrane

The challenge for polymeric enzyme reactors at present is to selectively control the enzymolysis rate in complex conditions. Additionally, the fabrication methodology is hindered by complex processes, especially for achieving diverse stimuli responsiveness and functions. Here, we reported a kind of pH-sensitive polymer, poly(styrene- co-maleic anhydride-acrylic acid) (PS-MAn-AA)-based hybrid enzyme reactor. It comprised magnetic nanoparticles and a pH-sensitive PS-MAn-AA porous polymer membrane made by breath figure method. The enzyme l-asparaginase (l-ASNase) could covalently bond on the surface of the pH-sensitive porous polymer membrane (pH-PPM), and the resultant enzyme reactor was characterized by Fourier transform infrared spectroscopy and vibrating sample magnetometer. The apparent Michaelis-Menten constants ( K_m and V_max) of the l-ASNase enzyme reactor at different pH values were determined by a chiral ligand-exchange capillary electrophoresis method with l-asparagine as the substrate. The V_max value of the l-ASNase enzyme reactor (0.67 mM/min) was almost 3-fold of that of the free l-ASNase (0.23 mM/min) at pH 8.2. Its ability to precisely control the enzymolysis rate in complex conditions is triggered primarily by the pH of the buffer solution, allowing controlled enzymatic reactions and displaying excellent stability and reusability of the proposed pH-PPM. This strategy for porous polymer membrane enzyme reactor fabrication has established a platform for enzyme efficiency adjusting. These valve-like distinguished features highlight the outstanding potential of stimuli-responsive enzyme reactor applied for enzyme immobilization and enzyme-related disease treatment.

Development of L-Asparaginase Biobetters: Current Research Status and Review of the Desirable Quality Profiles

L-Asparaginase (ASNase) is a vital component of the first line treatment of acute lymphoblastic leukemia (ALL), an aggressive type of blood cancer expected to afflict over 53,000 people worldwide by 2020. More recently, ASNase has also been shown to have potential for preventing metastasis from solid tumors. The ASNase treatment is, however, characterized by a plethora of potential side effects, ranging from immune reactions to severe toxicity. Consequently, in accordance with Quality-by-Design (QbD) principles, ingenious new products tailored to minimize adverse reactions while increasing patient survival have been devised. In the following pages, the reader is invited for a brief discussion on the most recent developments in this field. Firstly, the review presents an outline of the recent improvements on the manufacturing and formulation processes, which can severely influence important aspects of the product quality profile, such as contamination, aggregation and enzymatic activity. Following, the most recent advances in protein engineering applied to the development of biobetter ASNases (i.e., with reduced glutaminase activity, proteolysis resistant and less immunogenic) using techniques such as site-directed mutagenesis, molecular dynamics, PEGylation, PASylation and bioconjugation are discussed. Afterwards, the attention is shifted toward nanomedicine including technologies such as encapsulation and immobilization, which aim at improving ASNase pharmacokinetics. Besides discussing the results of the most innovative and representative academic research, the review provides an overview of the products already available on the market or in the latest stages of development. With this, the review is intended to provide a solid background for the current product development and underpin the discussions on the target quality profile of future ASNase-based pharmaceuticals.

Applications of RAFT polymerization for chemical and enzymatic stabilization of l-asparaginase conjugates with well-defined poly(HPMA)

HPMA RAFT polymerization and activation with variable linker chemistry for stabilization of l-asparaginase against pH, temperature, freeze–thaw and proteolytic stresses.

Thiol-maleimide poly(ethylene glycol) crosslinking of L-asparaginase subunits at recombinant cysteine residues introduced by mutagenesis

L-Asparaginase is an enzyme successfully being used in the treatment of acute lymphoblastic leukemia, acute myeloid leukemia, and non-Hodgkin’s lymphoma. However, some disadvantages still limit its full application potential, e.g., allergic reactions, pancreatitis, and blood clotting impairment. Therefore, much effort has been directed at improving its performance. A popular strategy is to randomly conjugate L-asparaginase with mono-methoxy polyethylene glycol, which became a commercial FDA approved formulation widely used in recent years. To improve this formulation by PEGylation, herein we performed cysteine-directed conjugation of the L-asparaginase subunits to prevent dissociation-induced loss of activity. The recombinant cysteine conjugation sites were introduced by mutagenesis at surface-exposed positions on the protein to avoid affecting the catalytic activity. Three conjugates were obtained using different linear PEGs of 1000, 2000, and 5000 g/mol, with physical properties ranging from a semi-solid gel to a fully soluble state. The soluble-conjugate exhibited higher catalytic activity than the non-conjugated mutant, and the same activity than the native enzyme. The cysteine-directed crosslinking of the L-asparaginase subunits produced a higher molecular weight conjugate compared to the native tetrameric enzyme. This strategy might improve L-asparaginase efficiency for leukemia treatment by reducing glomerular filtration due to the increase in hydrodynamic size thus extending half-live, while at the same time retaining full catalytic activity.

Confinement of Therapeutic Enzymes in Selectively Permeable Polymer Vesicles by Polymerization-Induced Self-Assembly (PISA) Reduces Antibody Binding and Proteolytic Susceptibility

Covalent PEGylation of biologics has been widely employed to reduce immunogenicity, while improving stability and half-life in vivo. This approach requires covalent protein modification, creating a new entity. An alternative approach is stabilization by encapsulation into polymersomes; however this typically requires multiple steps, and the segregation requires the vesicles to be permeable to retain function. Herein, we demonstrate the one-pot synthesis of therapeutic enzyme-loaded vesicles with size-selective permeability using polymerization-induced self-assembly (PISA) enabling the encapsulated enzyme to function from within a confined domain. This strategy increased the proteolytic stability and reduced antibody recognition compared to the free protein or a PEGylated conjugate, thereby reducing potential dose frequency and the risk of immune response. Finally, the efficacy of encapsulated l-asparaginase (clinically used for leukemia treatment) against a cancer line was demonstrated, and its biodistribution and circulation behavior in vivo was compared to the free enzyme, highlighting this methodology as an attractive alternative to the covalent PEGylation of enzymes.

Engineering l-asparaginase for spontaneous formation of calcium phosphate bioinspired microreactors

Active bioinspired materials are appealing biotechnological targets, and their study is gaining momentum. These materials, which comprise of an inorganic matrix and one or more biomolecules, are extremely variable and therefore may result difficult to characterize in their intimate structure. In this work we have prepared a hydroxyapatite-l-asparaginase composite, with the perspective of using it in acute leukemia treatment. We demonstrate that the use of electron microscopy and powder X-ray diffraction, combined with the atomic-resolution information coming from solid-state NMR, allows us to understand the topology of the material and how the different components interplay to obtain an active composite.

Marine microbial L-asparaginase: Biochemistry, molecular approaches and applications in tumor therapy and in food industry

The marine environment is a rich source of biological and chemical diversity. It covers more than 70% of the Earth's surface and features a wide diversity of habitats, often displaying extreme conditions, where marine organisms thrive, offering a vast pool for microorganisms and enzymes. Given the dissimilarity between marine and terrestrial habitats, enzymes and microorganisms, either novel or with different and appealing features as compared to terrestrial counterparts, may be identified and isolated. L-asparaginase (E.C. 3.5.1.1), is among the relevant enzymes that can be obtained from marine sources. This amidohydrolase acts on L-asparagine and produce L-aspartate and ammonia, accordingly it has an acknowledged chemotherapeutic application, namely in acute lymphoblastic leukemia. Moreover, L-asparaginase is also of interest in the food industry as it prevents acrylamide formation. Terrestrial organisms have been largely tapped for L-asparaginases, but most failed to comply with criteria for practical applications, whereas marine sources have only been marginally screened. This work provides an overview on the relevant features of this enzyme and the framework for its application, with a clear emphasis on the use of L-asparaginase from marine sources. The review envisages to highlight the unique properties of marine L-asparaginases that could make them good candidates for medical applications and industries, especially in food safety.

Magnetic-propelled Fe3O4–chitosan carriers enhancel-asparaginase catalytic activity: a promising strategy for enzyme immobilization

Magnetic-propelled carriers comprising magnetic Fe₃O₄–chitosan nanoparticles were immobilized with l-asparaginase (l-ASNase). The enzyme displayed enhanced catalytic activity in a weak magnetic field, and thermal and pH stabilities. The conjugated l-ASNase presented higher thermostability and wider range of pH stability in comparison with those of free l-ASNase. Moreover, the reusability of conjugated l-ASNase significantly improved after immobilization and it retained 60.5% of its initial activity after undergoing 16 cycles. The conjugated l-ASNase maintained more than 50% and 48% initial activity after 4 weeks of storage at 4 °C and room temperature, respectively. Furthermore, we reveal that the activity of conjugated l-ASNase onto magnetic Fe₃O₄–chitosan particles increased by about 3-fold in the weak magnetic field at certain frequencies and flux density compared with that of free l-ASNase. Considering these excellent attributes, the magnetic-propelled mechanism in the transporting and activation of l-ASNase can be used by enhancing the catalytic activity, stability, and efficiency in vital implications for medicinal biotechnology.

A magnetic-propelled carrier comprising chitosan-coated Fe₃O₄ nanoparticles was prepared to enhance the catalytic activity of immobilized l-asparaginase in a weak magnetic field.