Structural Changes in Spider Dragline Silk after Repeated Supercontraction-Stretching Processes

FTIR microspectroscopic study of gastric cancer AGS cells apoptosis induced by As2O3

As2O3 has shown significant anti-gastric cancer effects, but the mechanism is still unclear. Thus, biomacromolecular changes induced by As2O3 were investigated by using human gastric cancer AGS cells as the model. Flow cytometry results confirmed that As2O3 induced AGS cells apoptosis. Fourier transform infrared (FTIR) microspectroscopy detected biomacromolecular changes during As2O3-induced AGS cells apoptosis sensitively: IR spectra showed significant changes in the lipids content and the proteins and DNA structure. Peak-area ratios indicated obvious changes in the lipids and DNA content and the proteins structure, while also showing a relatively good linear relationship between A1733/A969 and the apoptosis rate. PCA exhibited significant alteration in nucleic acids while curve fitting further revealed the changes in nucleic acids and proteins. On the whole, our study explored As2O3-induced gastric cancer cells apoptosis in depth on the basis of analyzing biomacromolecular changes, in addition, it also suggested FTIR microspectroscopy to be possibly useful in the research of apoptosis.

Influence of experimental methods on the mechanical properties of silk fibers: A systematic literature review and future road map

Spider silk fibers are of scientific and industrial interest because of their extraordinary mechanical properties. These properties are normally determined by tensile tests, but the values obtained are dependent on the morphology of the fibers, the test conditions, and the methods by which stress and strain are calculated. Because of this, results from many studies are not directly comparable, which has led to widespread misconceptions in the field. Here, we critically review most of the reports from the past 50 years on spider silk mechanical performance and use artificial spider silk and native silks as models to highlight the effect that different experimental setups have on the fibers' mechanical properties. The results clearly illustrate the importance of carefully evaluating the tensile test methods when comparing the results from different studies. Finally, we suggest a protocol for how to perform tensile tests on silk and biobased fibers.

Lampshade web spider Ectatosticta davidi chromosome-level genome assembly provides evidence for its phylogenetic position

The spider of Ectatosticta davidi, belonging to the lamp-shade web spider family, Hypochilidae, which is closely related to Hypochilidae and Filistatidae and recovered as sister of the rest Araneomorphs spiders. Here we show the final assembled genome of E. davidi with 2.16 Gb in 15 chromosomes. Then we confirm the evolutionary position of Hypochilidae. Moreover, we find that the GMC gene family exhibit high conservation throughout the evolution of true spiders. We also find that the MaSp genes of E. davidi may represent an early stage of MaSp and MiSp genes in other true spiders, while CrSp shares a common origin with AgSp and PySp but differ from MaSp. Altogether, this study contributes to addressing the limited availability of genomic sequences from Hypochilidae spiders, and provides a valuable resource for investigating the genomic evolution of spiders.

Synergistic enhancement on flexible solid-state supercapacitor based on redox-active Fe3+ions/natural spidroin modified vertically aligned carbon nanotube arrays

The conductive skeleton and aligned carbon nanotube array (CNTA) structure can greatly shorten the ion transfer path and promote the charge transfer speed, which makes the CNTA an ideal electrode material for energy storage application. However, poor mechanical stability and low specific capacitance greatly impede its practical utilization. Here, we introduce a promising flexible electrode material based on the natural spider silk protein (SSP) modified CNTA(SSP/CNTA) with improved hydrophilicity and mechanical flexibility. The redox-active Fe³⁺doped SSP/CNTA flexible solid-state supercapacitor (FSSC) device with superior energy storage performance was assembled in a symmetric 'sandwich-type' structure. The synergetic interaction between Fe³⁺ions and the SSP are proved to greatly enhance the electrochemical performance especially the long-term cyclic stability. The Fe³⁺doped SSP/CNTA FSSCs device achieves an ultra-high volumetric capacitance of 4.92 F cm^-3at a sweep speed of 1 mV s^-1. Meanwhile it exhibited an excellent cycling stability with an increased capacitance by 10% after 10 000 charge-discharge cycles. As a control, a Fe³⁺doped CNTA composite device without SSP will lose over 74% of the capacitance after 10 000 cycles. The energy storage mechanism analysis confirms the dominated capacitive behavior of the device, which explained a considerable power density and rate performance. Our method thus provides a promising strategy to build up highly-efficient redox-enhanced FSSCs for next generation of wearable and implantable electronics.

Artificial and natural silk materials have high mechanical property variability regardless of sample size

Silk fibres attract great interest in materials science for their biological and mechanical properties. Hitherto, the mechanical properties of the silk fibres have been explored mainly by tensile tests, which provide information on their strength, Young’s modulus, strain at break and toughness modulus. Several hypotheses have been based on these data, but the intrinsic and often overlooked variability of natural and artificial silk fibres makes it challenging to identify trends and correlations. In this work, we determined the mechanical properties of Bombyx mori cocoon and degummed silk, native spider silk, and artificial spider silk, and compared them with classical commercial carbon fibres using large sample sizes (from 10 to 100 fibres, in total 200 specimens per fibre type). The results confirm a substantial variability of the mechanical properties of silk fibres compared to commercial carbon fibres, as the relative standard deviation for strength and strain at break is 10–50%. Moreover, the variability does not decrease significantly when the number of tested fibres is increased, which was surprising considering the low variability frequently reported for silk fibres in the literature. Based on this, we prove that tensile testing of 10 fibres per type is representative of a silk fibre population. Finally, we show that the ideal shape of the stress–strain curve for spider silk, characterized by a pronounced exponential stiffening regime, occurs in only 25% of all tested spider silk fibres.

Spider Silk-Inspired Artificial Fibers

Spider silk is a natural polymeric fiber with high tensile strength, toughness, and has distinct thermal, optical, and biocompatible properties. The mechanical properties of spider silk are ascribed to its hierarchical structure, including primary and secondary structures of the spidroins (spider silk proteins), the nanofibril, the "core-shell", and the "nano-fishnet" structures. In addition, spider silk also exhibits remarkable properties regarding humidity/water response, water collection, light transmission, thermal conductance, and shape-memory effect. This motivates researchers to prepare artificial functional fibers mimicking spider silk. In this review, the authors summarize the study of the structure and properties of natural spider silk, and the biomimetic preparation of artificial fibers from different types of molecules and polymers by taking some examples of artificial fibers exhibiting these interesting properties. In conclusion, biomimetic studies have yielded several noteworthy findings in artificial fibers with different functions, and this review aims to provide indications for biomimetic studies of functional fibers that approach and exceed the properties of natural spider silk.

Modulating Surface Properties of the Linothele fallax Spider Web by Solvent Treatment

Linothele fallax (Mello-Leitão) (L. fallax) spider web, a potentially attractive tissue engineering material, was investigated using quantitative peak force measurement atomic force microscopy and scanning electron microscopy with energy dispersive spectroscopy both in its natural state and after treatment with solvents of different protein affinities, namely, water, ethanol, and dimethyl sulfoxide (DMSO). Native L. fallax silk threads are densely covered by globular objects, which constitute their inseparable parts. Depending on the solvent, treating L. fallax modifies its appearance. In the case of water and ethanol, the changes are minor. In contrast, DMSO practically removes the globules and fuses the threads into dense bands. Moreover, the solvent treatment influences the chemistry of the threads' surface, changing their adhesive and, therefore, biocompatibility and cell adhesion properties. On the other hand, the solvent-treated web materials' contact effect on different types of biological matter differs considerably. Protein-rich matter controls humidity better when wrapped in spider silk treated with more hydrophobic solvents. However, carbohydrate plant materials retain more moisture when wrapped in native spider silk. The extracts produced with the solvents were analyzed using nuclear magnetic resonance (NMR) and liquid chromatography-mass spectrometry techniques, revealing unsaturated fatty acids as representative adsorbed species, which may explain the mild antibacterial effect of the spider silk. The extracted metabolites were similar for the different solvents, meaning that the globules were not "dissolved" but "fused into" the threads themselves, being supposedly rolled-in knots of the protein chain.