Photopolymerization of Bio-Based Polymers in a Biomedical Engineering Perspective

Evaluation of Various Types of Alginate Inks for Light-Mediated Extrusion 3D Printing

Naturally derived biopolymers modifying or combining with other components are excellent candidates to promote the full potential of additive manufacturing in biomedicine, cosmetics, and the food industry. This work aims to develop new photo-cross-linkable alginate-based inks for extrusion 3D printing. Specifically, this work is focused on the effect of the addition of cross-linkers with different chemical structures (polyethylene glycol diacrylate (PEGDA), N,N'-methylenebisacrylamide (NMBA), and acrylic acid (AA)) in the potential printability and physical properties of methacrylated alginate (AlgMe) hydrogels. Although all inks showed maximum photo-curing conversions and gelation times less than 2 min, only those structures printed with the inks incorporating cross-linking agents with flexible and long chain structure (PEGDA and AA) displayed acceptable size accuracy (~0.4-0.5) and printing index (Pr ~1.00). The addition of these cross-linking agents leads to higher Young's moduli (from 1.6 to 2.0-2.6 KPa) in the hydrogels, and their different chemical structures results in variations in their mechanical and rheological properties. However, similar swelling ability (~15 swelling factor), degradability (~45 days 100% weight loss), and cytocompatibility (~100%) were assessed in all the systems, which is of great importance for the final applicability of these hydrogels.

Systematic screening of photopolymer resins for stereolithography (SLA) 3D printing of solid oral dosage forms: Investigation of formulation factors on printability outcomes

Pharmaceutical three-dimensional printing (3DP) is now in its golden age. Recent years have seen a dramatic increase in the research in 3D printed pharmaceuticals due to their potential to deliver highly personalised medicines, thus revolutionising the way medicines are designed, manufactured, and dispensed. A particularly attractive 3DP technology used to manufacture medicines is stereolithography (SLA), which features key advantages in terms of printing resolution and compatibility with thermolabile drugs. Nevertheless, the enthusiasm for pharmaceutical SLA has not been followed by the introduction of novel excipients specifically designed for the fabrication of medicines; hence, the choice of biocompatible polymers and photoinitiators available is limited. This work provides an insight on how to maximise the usefulness of the limited materials available by evaluating how different formulation factors affect printability outcomes of SLA 3D printed medicines. 156 photopolymer formulations were systematically screened to evaluate the influence of factors including photoinitiator amount, photopolymer molecular size, and type and amount of liquid filler on the printability outcomes. Collectively, these factors were found highly influential in modulating the print quality of the final dosage forms. Findings provide enhanced understanding of formulation parameters informing the future of SLA 3D printed medicines and the personalised medicines revolution.

Resorbable conductive materials for optimally interfacing medical devices with the living

Implantable and wearable bioelectronic systems are arising growing interest in the medical field. Linking the microelectronic (electronic conductivity) and biological (ionic conductivity) worlds, the biocompatible conductive materials at the electrode/tissue interface are key components in these systems. We herein focus more particularly on resorbable bioelectronic systems, which can safely degrade in the biological environment once they have completed their purpose, namely, stimulating or sensing biological activity in the tissues. Resorbable conductive materials are also explored in the fields of tissue engineering and 3D cell culture. After a short description of polymer-based substrates and scaffolds, and resorbable electrical conductors, we review how they can be combined to design resorbable conductive materials. Although these materials are still emerging, various medical and biomedical applications are already taking shape that can profoundly modify post-operative and wound healing follow-up. Future challenges and perspectives in the field are proposed.

Bioactive and biomimetic 3D scaffolds for bone tissue engineering using graphitic carbon nitride as a sustainable visible light photoinitiator

Graphitic carbon nitride (g-C3N4) is explored as a novel sustainable visible light photoinitiator for the preparation of biomimetic 3D hydrogel scaffolds comprising gelatin methacrylamide (GelMA) and dopamine methacrylamide for use in tissue engineering. The initiator efficiency was assessed by comparing the swelling behavior and the stability of photopolymerized hydrogels prepared with GelMA of different degrees of functionalization and different comonomer compositions. Bioactive composite hydrogels with a 50 wt% nanohydroxyapatite (nHAp) content, to closely mimic the actual bone composition, were successfully obtained by the introduction of nHAp in the prepolymer solutions followed by photopolymerization. The composite hydrogels demonstrated enhanced mechanical properties and excellent stability in PBS verifying the preparation of robust 3D scaffolds for use in cancellous or pre-calcified bone tissue engineering applications. The in vitro cell response of the composite scaffolds exhibited high cell viability and enhanced differentiation of pre-osteoblasts to mature osteoblasts, demonstrating their osteogenic potential. This work establishes, for the first time, the excellent properties of g-C3N4 as a sustainable, visible light initiator, fully satisfying the principles of green chemistry, for the preparation of robust and biologically relevant hydrogels, and proposes a new approach to overcome the main challenges of conventional photoinitiators in cell scaffold fabrication, such as photobleaching, high cost and non-scalable synthesis employing toxic organic precursors and solvents.

A 3D-Printed Dual Driving Forces Scaffold with Self-Promoted Cell Absorption for Spinal Cord Injury Repair

Stem cells play critical roles in cell therapies and tissue engineering for nerve repair. However, achieving effective delivery of high cell density remains a challenge. Here, a novel cell delivery platform termed the hyper expansion scaffold (HES) is developed to enable high cell loading. HES facilitated self-promoted and efficient cell absorption via a dual driving force model. In vitro tests revealed that the HES rapidly expanded 80-fold in size upon absorbing 2.6 million human amniotic epithelial stem cells (hAESCs) within 2 min, representing over a 400% increase in loading capacity versus controls. This enhanced uptake benefited from macroscopic swelling forces as well as microscale capillary action. In spinal cord injury (SCI) rats, HES-hAESCs promoted functional recovery and axonal projection by reducing neuroinflammation and improving the neurotrophic microenvironment surrounding the lesions. In summary, the dual driving forces model provides a new rationale for engineering hydrogel scaffolds to facilitate self-promoted cell absorption. The HES platform demonstrates great potential as a powerful and efficient vehicle for delivering high densities of hAESCs to promote clinical treatment and repair of SCI.

First-Row d6 Metal Complex Enables Photon Upconversion and Initiates Blue Light-Dependent Polymerization with Red Light

Photosensitizers for sensitized triplet-triplet annihilation upconversion (sTTA-UC) often rely on precious heavy metals, whereas coordination complexes based on abundant first-row transition metals are less common. This is mainly because long-lived triplet excited states are more difficult to obtain for 3d metals, particularly when the d-subshell is only partially filled. Here, we report the first example of sTTA-UC based on a 3d6 metal photosensitizer yielding an upconversion performance competitive with precious metal-based analogues. Using a newly developed Cr0 photosensitizer featuring equally good photophysical properties as an OsII benchmark complex in combination with an acetylene-decorated anthracene annihilator, red-to-blue upconversion is achievable. The upconversion efficiency under optimized conditions is 1.8 %, and the excitation power density threshold to reach the strong annihilation limit is 5.9 W/cm2 . These performance factors, along with high photostability, permit the initiation of acrylamide polymerization by red light, based on radiative energy transfer between delayed annihilator fluorescence and a blue light absorbing photo-initiator. Our study provides the proof-of-concept for photon upconversion with elusive first-row analogues of widely employed precious d6 metal photosensitizers, and for their application in photochemical reactions triggered by excitation wavelengths close to near-infrared.

Degradable Elastomeric Silk Biomaterial for Flexible Bioelectronics

The integration of degradable and biomimetic approaches in material and device development can facilitate the next generation of sustainable (bio) electronics. The use of functional degradable materials presents exciting opportunities for applications in healthcare, soft robotics, energy, and electronics. These include conformability to curved surfaces, matching of stiffness of tissue, and the ability to withstand mechanical deformations. Nature-derived materials such as silk fibroin (SF) provide excellent biocompatibility, resorbability, and tunable properties toward such goals. However, fibroin alone lacks the required mechanical properties and durability for processing in biointegrated electronics and dry conditions. To overcome these limitations, we report on an elastomeric photocurable composite of silk fibroin and poly(dimethylsiloxane) (PDMS). Photofibroin (containing methacryl functionalities) is doped with photoPDMS (methacryloxypropyl-terminated poly(dimethylsiloxane)) to form an elastomeric photofibroin (ePF) composite. The elastomeric silk is photocurable, allowing for microfabrication using UV photolithography. It is suitable for circuits, strain-sensing devices, and biointegrated systems. The ePF exhibits flexibility in both wet and dry conditions, enhanced mechanical strength and long-term durability, and optical transparency. It is stable at high temperatures, compatible with electronic materials, and cytocompatible while being enzymatically degradable. This work therefore highlights a path toward combining natural and synthetic materials to achieve versatile properties and demonstrates the potential of silk fibroin composites in (bio) electronics, encapsulation, and packaging.

UV-Induced Thiol-Ene "Click" Surface Grafting Polymerization on BOPP Substrate and Its Postmodifying for Hydrophilic and Antibacterial Applications

This paper proposed a novel and versatile surface modification route by integrating UV light-mediated thiol-ene "click" surface grafting polymerization and postmodification via the reactions of the surface thiol groups. At first, poly(thiol ether) layers with tunable thiol group density, up to 8.2 × 102 ea/nm3 for cross-linked grafting layers, were grafted from biaxially oriented polypropylene (BOPP) film. Then, the surface -SH groups reacted with epoxy compounds to introduce quaternary ammonium salt. With the immobilized quaternary ammonium salt and coordinated Zn2+ ions, the modified film demonstrated 99.98% antibacterial rate against Staphylococcus aureusafter soaking in DI water for 21 days and in a highly alkaline environment (0.1 M NaOH aqueous solution) for 3 days, and the surface water contact angle decreased to 39°. At last, the polymethacrylate chains were also successfully grafted from the surface thiol groups of the cross-linked poly(thiol ether) under visible light irradiation. With 2-(dimethyldodecylammonium) ethyl methacrylate as the grafting monomer, the modified BOPP film had shown a 99.99% antibacterial rate against both Escherichia coliand S. aureus. Meanwhile, with 2-methacryloxyethyl phosphoryl choline as grafting monomer, the modified surface showed an excellent antibioadhesion of living S. aureus, and the surface water contact angle was as low as 48°.

The battle of lipid-based nanocarriers against blood-brain barrier: a critical review

Central nervous system integrity is the state of brain functioning across sensory, cognitive, emotional-social behaviors, and motor domains, allowing a person to realise his full potential. Thus, brain disorders seriously affect patients' quality of life. Efficient drug delivery to treat brain disorders remains a crucial challenge due to numerous brain barriers, particularly the blood-brain barrier (BBB), which greatly impacts the ultimate drug therapeutic efficacy. Lately, nanocarrier technology has made huge progress in overcoming these barriers by improving drug solubility, ameliorating its retention, reducing its toxicity, and targeting the encapsulated agents to different brain tissues. The current review primarily offers an overview of the different components of BBB and the progress, strategies, and contemporary applications of the nanocarriers, specifically lipid-based nanocarriers (LBNs), in treating various brain disorders.

Emerging Bioprinting for Wound Healing

Bioprinting has attracted much attention due to its suitability for fabricating biomedical devices. In particular, bioprinting has become one of the growing centers in the field of wound healing, with various types of bioprinted devices being developed, including 3D scaffolds, microneedle patches, and flexible electronics. Bioprinted devices can be designed with specific biostructures and biofunctions that closely match the shape of wound sites and accelerate the regeneration of skin through various approaches. Herein, a comprehensive review of the bioprinting of smart wound dressings is presented, emphasizing the crucial effect of bioprinting in determining biostructures and biofunctions. The review begins with an overview of bioprinting techniques and bioprinted devices, followed with an in-depth discussion of polymer-based inks, modification strategies, additive ingredients, properties, and applications. The strategies for the modification of bioprinted devices are divided into seven categories, including chemical synthesis of novel inks, physical blending, coaxial bioprinting, multimaterial bioprinting, physical absorption, chemical immobilization, and hybridization with living cells, and examples are presented. Thereafter, the frontiers of bioprinting and wound healing, including 4D bioprinting, artificial intelligence-assisted bioprinting, and in situ bioprinting, are discussed from a perspective of interdisciplinary sciences. Finally, the current challenges and future prospects in this field are highlighted.

Engineering 3D-Printed Advanced Healthcare Materials for Periprosthetic Joint Infections

The use of additive manufacturing or 3D printing in biomedicine has experienced fast growth in the last few years, becoming a promising tool in pharmaceutical development and manufacturing, especially in parenteral formulations and implantable drug delivery systems (IDDSs). Periprosthetic joint infections (PJIs) are a common complication in arthroplasties, with a prevalence of over 4%. There is still no treatment that fully covers the need for preventing and treating biofilm formation. However, 3D printing plays a major role in the development of novel therapies for PJIs. This review will provide a deep understanding of the different approaches based on 3D-printing techniques for the current management and prophylaxis of PJIs. The two main strategies are focused on IDDSs that are loaded or coated with antimicrobials, commonly in combination with bone regeneration agents and 3D-printed orthopedic implants with modified surfaces and antimicrobial properties. The wide variety of printing methods and materials have allowed for the manufacture of IDDSs that are perfectly adjusted to patients' physiognomy, with different drug release profiles, geometries, and inner and outer architectures, and are fully individualized, targeting specific pathogens. Although these novel treatments are demonstrating promising results, in vivo studies and clinical trials are required for their translation from the bench to the market.

Interfacial Photopolymerization: A Method for Light-Based Printing of Thermoplastics

Ultraviolet (UV) printing of photopolymers is a widely adopted manufacturing method because of its high resolution and throughput. However, available printable photopolymers are typically thermosets, resulting in challenges in postprocessing and recycling of printed structures. Here, we present a new process called interfacial photopolymerization (IPP) which enables photopolymerization printing of linear chain polymers. In IPP, a polymer film is formed at the interface between two immiscible liquids, one containing a chain-growth monomer and the other containing a photoinitiator. We demonstrate the integration of IPP in a proof-of-concept projection system for printing of polyacrylonitrile (PAN) films and rudimentary multi-layer shapes . IPP shows in-plane and out-of-plane resolutions comparable to conventional photoprinting methods. Cohesive PAN films with number-average molecular weights greater than 15 kg mol^-1 are obtained, and to our knowledge this is the first report of photopolymerization printing of PAN. A macrokinetics model of IPP is developed to elucidate the transport and reaction rates involved and evaluate how reaction parameters affect film thickness and print speed. Last, demonstration of IPP in a multilayer scheme suggests its suitabiliy for three-dimensional printing of linear-chain polymers.

Polysaccharides and Structural Proteins as Components in Three-Dimensional Scaffolds for Breast Cancer Tissue Models: A Review

Breast cancer is the most common cancer among women, and even though treatments are available, efficiency varies with the patients. In vitro 2D models are commonly used to develop new treatments. However, 2D models overestimate drug efficiency, which increases the failure rate in later phase III clinical trials. New model systems that allow extensive and efficient drug screening are thus required. Three-dimensional printed hydrogels containing active components for cancer cell growth are interesting candidates for the preparation of next generation cancer cell models. Macromolecules, obtained from marine- and land-based resources, can form biopolymers (polysaccharides such as alginate, chitosan, hyaluronic acid, and cellulose) and bioactive components (structural proteins such as collagen, gelatin, and silk fibroin) in hydrogels with adequate physical properties in terms of porosity, rheology, and mechanical strength. Hence, in this study attention is given to biofabrication methods and to the modification with biological macromolecules to become bioactive and, thus, optimize 3D printed structures that better mimic the cancer cell microenvironment. Ink formulations combining polysaccharides for tuning the mechanical properties and bioactive polymers for controlling cell adhesion is key to optimizing the growth of the cancer cells.

Modification, 3D printing process and application of sodium alginate based hydrogels in soft tissue engineering: A review

Sodium alginate (SA) is an inexpensive and biocompatible biomaterial with fast and gentle crosslinking that has been widely used in biological soft tissue repair/regeneration. Especially with the advent of 3D bioprinting technology, SA hydrogels have been applied more deeply in tissue engineering due to their excellent printability. Currently, the research on material modification, molding process and application of SA-based composite hydrogels has become a hot topic in tissue engineering, and a lot of fruitful results have been achieved. To better help readers have a comprehensive understanding of the development status of SA based hydrogels and their molding process in tissue engineering, in this review, we summarized SA modification methods, and provided a comparative analysis of the characteristics of various SA based hydrogels. Secondly, various molding methods of SA based hydrogels were introduced, the processing characteristics and the applications of different molding methods were analyzed and compared. Finally, the applications of SA based hydrogels in tissue engineering were reviewed, the challenges in their applications were also analyzed, and the future research directions were prospected. We believe this review is of great helpful for the researchers working in biomedical and tissue engineering.

Significantly improved antifouling capability of silicone rubber surfaces by covalently bonded acrylated agarose towards biomedical applications

Bacteria have the extraordinary ability to adhere to biomaterial surfaces and form multicellular structures known as biofilms, which have a detrimental impact on the performance of medical devices. Herein, an investigation highlighted the effective inhibition of bacteria adhesion and overgrowth on silicone rubber surface by grafting polysaccharide, agarose (AG), to construct hydrophilic and negatively charged surfaces. Because of the strong hydration capacity of agarose, the water contact angle of the modified silicone rubber surfaces was significantly reduced from 107.6 ± 2.7° to 19.3 ± 2.6°, which successfully limited bacterial adherence. Most importantly, the durability and stability of coating were observed after 10 days of simulated dynamic microenvironment in vivo, exhibiting a long service life. This modification method did not compromise biocompatibility of silicone rubber, opening a door to new applications for silicone rubber in the field of biomedical materials.

Biomimetic multifunctional hybrid sponge via enzymatic cross-linking to accelerate infected burn wound healing

Preparing sponge dressings with stable wet adhesion remains difficult in wound repair, especially in burn wounds with bleeding and large amounts of exudate. In this work, a multifunctional hybrid sponge dressing (DHGT+PHMB+TiO₂NPs) with good wet adhesion was developed by combining biomimetic and enzymatic cross-linking reactions. The sponge dressing matrix (DHGT) was prepared by tyrosinase-catalyzed cross-linking of dopamine-modified hyaluronic acid (DOPA-HA) and gelatin. The multifunctional hybrid sponge dressing was obtained by loading polyhexamethylene biguanide (PHMB) and titanium dioxide nanoparticles (TiO₂NPs) onto the DHGT matrix. The newly developed sponge dressing exhibited high mechanical properties, good wet adhesion, antibacterial activity, reactive oxygen species (ROS) scavenging, biocompatibility, and excellent hemostasis ability. In vivo studies showed that the multifunctional hybrid sponge dressing could significantly accelerate the healing of infected full-thickness burn wounds by inhibiting bacterial growth, accelerating skin tissue reepithelialization, collagen deposition, and angiogenesis, as well as regulating the expression of inflammatory factors and cytokines.

Naphthalene-Based Oxime Esters as Type I Photoinitiators for Free Radical Photopolymerization

In order to discuss the polymerization effect from the substituted position and methoxy group of Type I photinitiators, a series of naphthalene-based oxime esters was designed and synthesized. Compared to the 2-naphthalene-substituted compound, the UV absorption region of the 1-naphthalene-based compound was greatly improved. In addition, the methoxy substitution exhibited longer absorption characteristics than did the methoxy-free one. The photochemical reaction behavior of these novel compounds was also studied by photolysis, cyclic voltammetry (CV), and electron spin resonance (ESR) experiments. Finally, the initiation abilities of naphthalene-based oxime esters toward trimethylolpropane triacrylate (TMPTA) monomer were conducted through the photo-DSC instrument under UV and a 405@nm LED lamp. Remarkedly, the naphthalene-based oxime ester (NA-3) that contains 1-naphthalene with o-methoxy substituent showed the rather red-shifted absorption region with the highest final conversion efficiency under UV (46%) and 405@nm LED (41%) lamp irradiation.

Photo-curable carboxymethylcellulose composite hydrogel as a promising biomaterial for biomedical applications

A series of carboxymethylcellulose (CMC) functionalized with glycidyl methacrylate (GMA) was successfully synthesized for producing of CMC-g-GMA copolymer. Water-soluble CMC-g-GMA copolymer was photo-crosslinked while Irgacure-2959 was used as a UV-photo-initiator at 365 nm. On the other hand, cellulose nanocrystals (CNCs) from sugarcane were graft-copolymerized in an aqueous solution utilizing cerium ammonium nitrate (CAN) as an initiator in a redox-initiated free-radical approach. CNCs were grafted with GMA to enhance their physicochemical and biological characteristics. Factors affecting hydrogel formation, e.g. CMC-g-GMA copolymer concentration, irradiation time and incorporation of different concentration of CNCs-g-GMA nano-filler, were discussed in dependance on the swelling degree and gel fraction of the produced hydrogels. Notably, the addition of CNCs-g-GMA nanofillers increased progressively thermal stability of the prepared hydrogel. CMC-g-GMA filled with CNCs-g-GMA composite hydrogel showed antimicrobial activity against multidrug resistance pathogens. Thus, CMC-g-GMA filled with CNCs-g-GMA composite hydrogel could be endorsed as compatible biomaterials for versatile biomedical applications.

Novel Copper Complexes as Visible Light Photoinitiators for the Synthesis of Interpenetrating Polymer Networks (IPNs)

This work is devoted to the study of two copper complexes (Cu) bearing pyridine ligands, which were synthesized, evaluated and tested as new visible light photoinitiators for the free radical photopolymerization (FRP) of acrylates functional groups in thick and thin samples upon light-emitting diodes (LED) at 405 and 455 nm irradiation. These latter wavelengths are considered to be safe to produce polymer materials. The photoinitiation abilities of these organometallic compounds were evaluated in combination with an iodonium (Iod) salt and/or amine (e.g., N-phenylglycine—NPG). Interestingly, high final conversions and high polymerization rates were obtained for both compounds using two and three-component photoinitiating systems (Cu1 (or Cu2)/Iodonium salt (Iod) (0.1%/1% w/w) and Cu1 (or Cu2)/Iod/amine (0.1%/1%/1% w/w/w)). The new proposed copper complexes were also used for direct laser write experiments involving a laser diode at 405 nm, and for the photocomposite synthesis with glass fibers using a UV-conveyor at 395 nm. To explain the obtained polymerization results, different methods and characterization techniques were used: steady-state photolysis, real-time Fourier transform infrared spectroscopy (RT-FTIR), emission spectroscopy and cyclic voltammetry.

The Use of Graphene and Its Derivatives for the Development of Polymer Matrix Composites by Stereolithographic 3D Printing

Significant advances in graphene-based materials have facilitated the development of various composites structures in a diverse range of industry sectors. At present, the preparation of graphene-added materials is mainly developed through traditional methods. However, in recent years, additive manufacturing emerged as a promising approach that enables the printing of complex objects in a layer-by-layer fashion, without the need for moulds or machining equipment. This paper reviews the most recent reports on graphene-based photopolymerizable resins developed for stereolithography (SLA), with particular consideration for medical applications. The characteristics of the SLA technology, the most suitable raw materials and formulations and the properties of final 3D products are described. Throughout, a specific focus is placed on the mechanical properties and biocompatibility of the final 3D-printed object. Finally, remaining challenges and future directions are also discussed.

Functionalized Hemodialysis Polysulfone Membranes with Improved Hemocompatibility

The field of membrane materials is one of the most dynamic due to the continuously changing requirements regarding the selectivity and the upgradation of the materials developed with the constantly changing needs. Two membrane processes are essential at present, not for development, but for everyday life—desalination and hemodialysis. Hemodialysis has preserved life and increased life expectancy over the past 60–70 years for tens of millions of people with chronic kidney dysfunction. In addition to the challenges related to the efficiency and separative properties of the membranes, the biggest challenge remained and still remains the assurance of hemocompatibility—not affecting the blood during its recirculation outside the body for 4 h once every two days. This review presents the latest research carried out in the field of functionalization of polysulfone membranes (the most used polymer in the preparation of membranes for hemodialysis) with the purpose of increasing the hemocompatibility and efficiency of the separation process itself with a decreasing impact on the body.

Aggregation-Induced Emission-Active Biomacromolecules: Progress, Challenges, and Opportunities

Biomacromolecules featuring aggregation-induced-emission (AIE) characteristics generally present new properties and performances that are silent in the molecular state, providing endless possibilities for the evolution of biomedical applications. Tremendous achievements based on the research of AIE-active biomacromolecules have been made in synthetic exploration, material development, and practical applications. In this Perspective, we give a brief account in the development of AIE-active biomacromolecules. Remarkable progresses have been made in the exploration of AIE-active biomacromolecule preparation, structure-property relationships, and the relevant biomedical applications. The existing challenges and promising opportunities, as well as the future directions in AIE-active biomacromolecule research, are also discussed. It is expected that this Perspective can act as a trigger for the innovation of AIE-active biomacromolecule research and aggregate science.

Effects of the number and position of methoxy substituents on triphenylamine-based chalcone visible-light-absorbing photoinitiators

Five visible-light-absorbing triphenylamine-based chalcone photoinitiators (CY1–CY5) have been synthesized for application in free radical photopolymerization.

Novel photoinitiators based on difluoroborate complexes of squaraine dyes for radical polymerization of acrylates upon visible light

The present article describes the efficiency of novel two-component photoinitiators based on a typical squaraine dye and its difluoroborate analogues for the radical polymerization of acrylate monomers.

A Novel Generation of Polysulfone/Crown Ether-Functionalized Reduced Graphene Oxide Membranes with Potential Applications in Hemodialysis

Heavy metal poisoning is a rare health condition caused by the accumulation of toxic metal ions in the soft tissues of the human body that can be life threatening if left untreated. In the case of severe intoxications, hemodialysis is the most effective method for a rapid clearance of the metal ions from the bloodstream, therefore, the development of hemodialysis membranes with superior metal ions retention ability is of great research interest. In the present study, synthetic polysulfone membranes were modified with reduced graphene oxide functionalized with crown ether, an organic compound with high metal ions complexation capacity. The physico-chemical characteristics of the composite membranes were determined by FT-IR, Raman, XPS and SEM analysis while their efficiency in retaining metal ions was evaluated via ICP-MS analysis. The obtained results showed that the thermal stability of reduced graphene oxide was improved after functionalization with crown ether and that the presence of the carbonaceous filler influenced the membranes morphology in terms of pore dimensions and membrane thickness. Moreover, the ability of Cu2+ ions retention from synthetic feed solution was up to three times higher in the case of the composite membranes compared to the neat ones.

Crown Ether-Immobilized Cellulose Acetate Membranes for the Retention of Gd (III)

This study presents a new, revolutionary, and easy method of separating Gd (III). For this purpose, a cellulose acetate membrane surface was modified in three steps, as follows: firstly, with aminopropyl triethoxysylene; then with glutaraldehyde; and at the end, by immobilization of crown ethers. The obtained membranes were characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), through which the synthesis of membranes with Gd (III) separation properties is demonstrated. In addition, for the Gd (III) separating process, a gadolinium nitrate solution, with applications of moderator poison in nuclear reactors, was used. The membranes retention performance has been demonstrated by inductively coupled plasma mass spectrometry (ICP-MS), showing a separation efficiency of up to 91%, compared with the initial feed solution.

The Development of Light-Curable Calcium-Silicate-Containing Composites Used in Odontogenic Regeneration

Pulp regeneration is one of the most successful areas in the field of tissue regeneration, despite its current limitations. The biocompatibility of endodontic biomaterials is essential in securing the oral microenvironment and supporting pulp tissue regeneration. Therefore, the objective of this study was to investigate the new light-curable calcium silicate (CS)-containing polyethylene glycol diacrylate (PEGDA) biocomposites’ regulation of human dental pulp stem cells (hDPSCs) in odontogenic-related regeneration. The CS-containing PEGDA (0 to 30 wt%) biocomposites are applied to endodontics materials to promote their mechanical, bioactive, and biological properties. Firstly, X-ray diffraction and Fourier-transform infrared spectroscopy showed that the incorporation of CS increased the number of covalent bonds in the PEGDA. The diameter tension strength of the CS-containing PEGDA composite was significantly higher than that of normal PEGDA, and a different microstructure was detected on the surface. Samples were analyzed for their surface characteristics and Ca/Si ion-release profiles after soaking in simulated body fluid for different periods of time. The CS30 group presented better hDPSC adhesion and proliferation in comparison with CS0. Higher values of odontogenic-related biomarkers were found in hDPSCs on CS30. Altogether, these results prove the potential of light-curable CS-containing PEGDA composites as part of a ‘point-of-care’ strategy for application in odontogenesis-related regeneration.