Interactions between Chitosan and Alginate Dialdehyde Biopolymers and Their Layer-by-Layer Assemblies

Fabrication of Fully Positively Charged Layer-by-Layer Polyelectrolyte Nanofilms with pH-Dependent Swelling Properties

Nanofilms fabricated by layer-by-layer (LbL) assembly from polyelectrolytes (PEs) are important materials for various applications. However, PE films cannot retain the charges along the polymer chains during fabrication, resulting in a low charge density. In this study, the preparation of LbL nanofilms with preserved positive charges via a controllable and efficient approach was achieved. To fabricate fully positively charged (FPC) LbL nanofilms, a polycation, poly-l-lysine, was partially grafted with azide and alkyne groups. Through copper-catalyzed azide-alkyne cycloaddition and the LbL procedure, nanofilms were fabricated with all of the individual layers covalently bonded, improving the pH stability of the nanofilms. Because the resulting nanofilms had a high charge density with positive charges both inside and on the surface, they showed unique pH-dependent swelling properties and adsorption of negatively charged molecules compared with those of traditional polyelectrolyte LbL nanofilms. This kind of FPC nanofilm has great potential for use in sensors, diagnostics, and filter nanomaterials in the biomedical and environmental fields.

Chitosan/alginate nanogel potentiate berberine uptake and enhance oxidative stress mediated apoptotic cell death in HepG2 cells

Biopolymer-based nanoscale drug delivery systems have become a promising approach to overcome the limitations associated with conventional chemotherapeutics used for cancer treatment. Herein, we reported to develop a hydrophilic nanogel (NG) composed of Chitosan (Chi) and sodium alginate (Alg) using the ion gelation method for delivering Berberine hydrochloride (BBR), an alkaloid obtained from Berberis aristata roots. The use of different nanocarriers for BBR delivery has been reported previously, but the bioavailability of these carriers was limited due to phagocytic uptake and poor systemic delivery. The developed NG showed enhanced stability and efficient entrapment of BBR ∼92 %, resulting in a significant increase in bioavailability. The pH-dependent release behavior demonstrated sustained and effective release of ∼86 %, ∼74 % and, ∼53 % BBR at pH 5.5, 6.6, and 7.4 respectively after 72h, indicating its potential as a drug carrier. Additionally, the cellular uptake of BBR was significantly higher ∼19 % in the BBR-NG (25 μM) than in bulk BBR (100 μM), leading to enhanced ROS generation, mitochondrial depolarisation, and inhibition of cell proliferation and colony formation in HepG2 cells. In summary, the results suggest that the Chi/Alg biopolymer-based nano-formulation could be an effective approach for delivering BBR and enhancing its cellular uptake, efficacy, and cytotoxicity.

Self-Cross-Linkable Chitosan-Alginate Complexes Inspired by Mussel Glue Chemistry

In this study, mussel-inspired chemistry, based on catechol-amine reactions, was adopted to develop self-cross-linkable chitosan-alginate (Chi-Alg) complexes. To do so, the biopolymers were each substituted with ∼20% catechol groups (ChiC and AlgC), and then four complex combinations (Chi-Alg, ChiC-Alg, Chi-AlgC, ChiC-AlgC) were prepared at the surface and in bulk solution. Based on QCM-D and lap shear adhesion tests, the complex with catechol only on Chi (ChiC-Alg) did not show a significant variation from the control complex (Chi-Alg). Conversely, the complexes with catechol on alginate (Chi-AlgC and ChiC-AlgC) rendered a self-cross-linking property and enhanced cohesive properties.

Construction and Evaluation of Alginate Dialdehyde Grafted RGD Derivatives/Polyvinyl Alcohol/Cellulose Nanocrystals IPN Composite Hydrogels

To enhance the mechanical strength and cell adhesion of alginate hydrogel, making it satisfy the requirements of an ideal tissue engineering scaffold, the grafting of Arg-Gly-Asp (RGD) polypeptide sequence onto the alginate molecular chain was conducted by oxidation of sodium periodate and subsequent reduction amination of 2-methylpyridine borane complex (2-PBC) to synthesize alginate dialdehyde grafted RGD derivatives (ADA-RGD) with good cellular affinity. The interpenetrating network (IPN) composite hydrogels of alginate/polyvinyl alcohol/cellulose nanocrystals (ALG/PVA/CNCs) were fabricated through a physical mixture of ion cross-linking of sodium alginate (SA) with hydroxyapatite/D-glucono-δ-lactone (HAP/GDL), and physical cross-linking of polyvinyl alcohol (PVA) by a freezing/thawing method, using cellulose nanocrystals (CNCs) as the reinforcement agent. The effects of the addition of CNCs and different contents of PVA on the morphology, thermal stability, mechanical properties, swelling, biodegradability, and cell compatibility of the IPN composite hydrogels were investigated, and the effect of RGD grafting on the biological properties of the IPN composite hydrogels was also studied. The resultant IPN ALG/PVA/CNCs composite hydrogels exhibited good pore structure and regular 3D morphology, whose pore size and porosity could be regulated by adjusting PVA content and the addition of CNCs. By increasing the PVA content, the number of physical cross-linking points in PVA increased, resulting in greater stress support for the IPN composite hydrogels of ALG/PVA/CNCs and consequently improving their mechanical characteristics. The creation of the IPN ALG/PVA/CNCs composite hydrogels' physical cross-linking network through intramolecular or intermolecular hydrogen bonding led to improved thermal resistance and reduced swelling and biodegradation rate. Conversely, the ADA-RGD/PVA/CNCs IPN composite hydrogels exhibited a quicker degradation rate, attributed to the elimination of ADA-RGD by alkali. The results of the in vitro cytocompatibility showed that ALG/0.5PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels showed better proliferative activity in comparison with other composite hydrogels, while ALG/PVA/0.3%CNCs and ADA-RGD/PVA/0.3%CNCs composite hydrogels displayed obvious proliferation effects, indicating that PVA, CNCs, and ADA-RGD with good biocompatibility were conducive to cell proliferation and differentiation for the IPN composite hydrogels.

Physicochemical and in vitro biological evaluation of an injectable self-healing quaternized chitosan/oxidized pectin hydrogel for potential use as a wound dressing material

Injectable self-healing hydrogels are attractive materials for use as wound dressings. To prepare such hydrogels, the current study used quaternized chitosan (QCS) to improve the solubility and antibacterial activity and oxidized pectin (OPEC) to introduce aldehyde groups for Schiff's base reaction with the amine groups from QCS. Self-healing hydrogels were made by co-injection of polymer solutions at specific polymer concentrations and reagent ratios that optimized both Schiff's base reactions and ionic interactions. The optimal hydrogel displayed self-healing 30 min after cutting and continuous self-healing during continuous step strain analysis, rapid gelation (< 1 min), a storage modulus of 394 Pa, and hardness of 700 mN, and compressibility of 162 mN s. The adhesiveness of this hydrogel (133 Pa) was within a suitable range for application as a wound dressing. The extraction media from the hydrogel displayed no cytotoxicity to NCTC clone 929 cells and higher cell migration than the control. While the extraction media from the hydrogel was found not to have antibacterial properties, QCS was verified as having MIC50 of 0.04 mg/mL against both E. coli and S. aureus. Therefore, this injectable self-healing QCS/OPEC hydrogel has the potential use as a biocompatible hydrogel material for wound management.

Superior performance of novel chitosan-based flocculants in decolorization of anionic dyes: Responses of flocculation performance to flocculant molecular structures and hydrophobicity and flocculation mechanism

To achieve economical and efficient decolorization, two novel flocculants, weakly hydrophobic comb-like chitosan-graft-poly (N, N-Dimethylacrylamide) (CSPD) and strongly hydrophobic chain-like chitosan-graft-L-Cyclohexylglycine (CSLC) were synthesized in this study. To assess the effectiveness and application of CSPD and CSLC, the impacts of factors, including flocculant dosages, initial pH, initial dye concentrations, co-existing inorganic ions and turbidities, on the decolorization performance were explored. The results suggested that the optimum decolorizing efficiencies of the five anionic dyes ranged from 83.17% to 99.40%. Moreover, for accurately controlling flocculation performance, the responses to flocculant molecular structures and hydrophobicity in flocculation using CSPD and CSLC were studied. The Comb-like structure gives CSPD a wider dosage range for effective decolorization and better efficiencies with large molecule dyes under weak alkaline conditions. The strong hydrophobicity makes CSLC more effective in decolorization and more suitable for removing small molecule dyes under weak alkaline conditions. Meanwhile, the responses of removal efficiency and floc size to flocculant hydrophobicity are more sensitive. Mechanism studies revealed that charge neutralization, hydrogen bonding and hydrophobic association worked together in the decolorization of CSPD and CSLC. This study has provided meaningful guidance for developing flocculants in the treatment of diverse printing and dyeing wastewater.

Influence of Ionic Strength and Specific Ion Effects on Polyelectrolyte Multilayer Films with pH-Responsive Behavior

Layer-by-layer assembled multilayer films have shown great potential for different applications owing to their responsive behavior. Herein, we systematically investigated the effects of composition, salt concentration, and ion specificity on the pH responsiveness of covalently crosslinked chitosan and alginate dialdehyde multilayer films. The changes in film swelling were measured using ellipsometry from low (0.01 mM) to high (3 M) salt (NaCl or NaSCN) concentrations at pH 3, 6, and 9. The swelling responses to increasing ionic strength matched the swelling responses observed for polyzwitterionic and weak monocomponent polyelectrolyte films and depended on the multilayer composition, pH, and ion specificity. Finally, we used the ellipsometric data to demonstrate that the pH responsiveness of such multilayer films, as measured using a quartz crystal microbalance with dissipation monitoring, strongly depends on the ionic condition under which the responses were measured. We thus show that erroneous conclusions about the pH responsiveness of polyelectrolyte multilayer films can be easily obtained if the ionic environment of the application does not closely resemble the ionic condition under which the pH responsiveness is tested.

Synthesis of oxidized sodium alginate and its electrospun bio-hybrids with zinc oxide nanoparticles to promote wound healing

Electrospun fibers provide a promising platform for wound healing; however, they lack requisite characteristics for wound repair, including antibacterial and anti-inflammatory properties and angiogenic ability. Sodium alginate (SA) is being used for different types of applications. However, the poor spinnability of SA restricts its applications. The objectives of this study were three-fold: a) to synthesize oxidized sodium alginate (OSA) to improve its spinnability, b) to fabricate composite fibrous membranes by blending OSA along with zinc oxide nanoparticles (ZnO-NPs), and c) to decipher antibacterial and anti-inflammatory properties as well as biocompatibility of membranes in vitro and in vivo. OSA displaying different oxidation degrees (Dox (%)) was synthesized by varying the molar ratio of sodium periodate to SA. OSA (Dox, ∼48 %) afforded smooth and uniform fibers; 0.5 wt% of adipic dihydrazide (ADH) evolved into structurally stable and water-insoluble membranes. Composite fibrous membranes containing 2 wt% of ZnO-NPs displayed good biocompatibility and bactericidal effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in vitro. In addition, composite membranes showed remarkable epithelialization, neovascularization, and anti-inflammatory response than that of the membranes devoid of ZnO-NPs. Conclusively, these composite fibrous membranes may have broad implications for wound healing applications.

Novel Karaya Gum Derivatives Produced by Alkaline Hydrolysis and Periodate Oxidation for Active Packaging with Cinnamaldehyde

This study aims to produce novel derivatives of karaya gum using chemical modification and then apply them for active packaging with cinnamaldehyde as the main active component. Native karaya gum (NKG) was hydrolyzed using sodium hydroxide to yield hydrolyzed karaya gum (HKG), which then was oxidized using sodium periodate to yield hydrolyzed-oxidized karaya gum (HOKG). For comparison, NKG was also directly oxidized using sodium periodate to produce oxidized karaya gum (OKG). FTIR spectra confirmed the removal of acetyl groups after alkaline hydrolysis and the formation of carbonyl groups with subsequent formation of hemiacetal and acetal structures after periodate oxidation. The alkaline hydrolysis and the periodate oxidation resulted in opposite effects on the hydrophilicity of the gum: hydrolysis increased solubility, moisture uptake, and viscosity, while periodate oxidation decreased these properties. We then produced films from corn starch and these gums (5% $w/w$ gum/starch) and properties of the films were studied. Hydrolysis of KG resulted in higher tensile strength, higher transparency but lower puncture strength and antifungal activity against of the films, while periodate oxidation exerted the opposite effects. The incorporation of 5% cinnamaldehyde ( $w/w$ of starch) exerted strong antifungal and antibacterial effects on the films against Colletotrichum gloeosporioides and Escherichia coli, which are useful in active packaging. The active packages based on the novel derivatives of KG can find applications in the agricultural, food, and pharmaceutical industries.

Evaluation of the in vivo fate of ultrapure alginate in a BALB/c mouse model

The linear anionic polysaccharide alginate (ALG) has been comprehensively studied for biomedical applications, yet thus far the in vivo fate of this polymer has not been explored in detail. The current study therefore evaluates the biodistribution of ultrapure ALG (M/G ratio ≥ 0.67 with a measured M_w of 530 kg/mol and polydispersity index; PDI of 1.49) over a 14-day period in BALB/c mice. The biodistribution pattern over 2-days after sample administration using PET imaging with ⁶⁴Cu-labelled ALG showed liver and spleen uptake. This was confirmed by the 14-day biodistribution profile of cyanine 5-labelled ALG from in vivo and ex vivo fluorescence imaging. Using MacGreen mice confirmed the uptake of the ALG by macrophages in the spleen at the 2-day time point. This extended biodistribution study confirmed the clearance of only a portion of the administered ALG biopolymer, but also uptake by macrophage populations in the spleen over a 14-day period.

Applications of oxidized alginate in regenerative medicine

Because of its ideal degradation rate and features, oxidized alginate (OA) is selected as an appropriate substitute and has been introduced into hydrogels, microspheres, 3D-printed/composite scaffolds, membranes, and electrospinning and coating materials. By taking advantage of OA, the OA-based materials can be easily functionalized and deliver drugs or growth factors to promote tissue regeneration. In 1928, it was first found that alginate could be oxidized using periodate, yielding OA. Since then, considerable progress has been made in the research on the modification and application of alginate after oxidation. In this article, we summarize the key properties and existing applications of OA and various OA-based materials and discuss their prospects in regenerative medicine.

Environmentally Benign and Self-Extinguishing Multilayer Nanocoating for Protection of Flammable Foam

Most current flame-retardant nanocoatings for flexible polyurethane foam (PUF) consist of passive barriers, such as clay, graphene oxide, or metal hydroxide. In an effort to develop a polymeric and environmentally benign nanocoating for PUF, positively charged chitosan (CH) and anionic sodium hexametaphosphate (PSP) were deposited using layer-by-layer (LbL) assembly. Only six bilayers of CH/PSP film can withstand flame penetration during exposure to a butane torch (∼1400 °C) for 10 s and stop flame spread on the foam. Additionally, cone calorimetry reveals that the fire growth rate, peak heat release rate, and maximum average rate of heat emission are reduced by 55, 43, and 38%, respectively, compared with uncoated foam. This multilayer thin film quickly dehydrates to form an intumescent charred exoskeleton on the surface of the open-celled structure of polyurethane, inhibiting heat transfer and completely eliminating melt dripping. This entirely polymeric nanocoating provides a safe and effective alternative for reducing the fire hazard of polyurethane foam that is widely used for cushioning and insulation.

Enhanced Oral Vaccine Efficacy of Polysaccharide-Coated Calcium Phosphate Nanoparticles

Oral administration of vaccines has been limited due to low immune response compared to parenteral administration. Antigen degradation in the acidic gastrointestinal environment (GI), mucus barriers, and inefficient cellular uptake by immune cells are the major challenges for oral vaccine delivery. To solve these issues, the current study investigates calcium phosphate nanoparticles (CaP NPs) coated with polysaccharides as nanocarriers for oral protein antigen delivery. In this design, the CaP NP core had an optimized antigen encapsulation capacity of 90 mg (BSA-FITC)/g (CaP NPs). The polysaccharides chitosan and alginate were coated onto the CaP NPs to protect the antigens against acidic degradation in the GI environment and enhance the immune response in the small intestine. The antigen release profiles showed that alginate-chitosan-coated CaP NPs prevented antigen release in a simulated gastric fluid (pH 1.2), followed by sustained release in simulated intestinal (pH 6.8) and colonic (pH 7.4) fluids. Cellular uptake and macrophage stimulation data revealed that the chitosan coating enhanced antigen uptake by intestine epithelia cells (Caco-2) and macrophages and improved surface expression of costimulatory molecules on macrophages. In vivo test further demonstrated that oral administration of alginate-chitosan-coated CaP@OVA NPs significantly enhanced the mucosal IgA and serum IgG antibody responses as compared to naked OVA, indicating that the CaP-Chi-Alg nanoparticle can potentially be used as a promising oral vaccine delivery system.

Swelling Behavior, Interaction, and Electrostatic Properties of Chitosan/Alginate Dialdehyde Multilayer Films with Different Outermost Layer

In this study, self-cross-linked chitosan/alginate dialdehyde multilayer films, capped with either alginate dialdehyde (6 layers) or chitosan (7 layers), were fabricated using the layer-by-layer method. The disruption of the electrostatic equilibrium when exposing the fabricated layers to acidic and alkaline conditions causes swelling within the film and independently in the outermost layer, showing dependence on the ionic strength. Spectroscopic ellipsometry and quartz crystal microbalance with dissipation monitoring were employed to examine the swelling behavior. Atomic force microscopy colloidal probe measurements were conducted to assess the surface forces between the multilayer films at different pH and ionic strengths. Finally, the electrostatic properties of the multilayer films were examined at different pH and ionic strengths using zeta potential measurements. The results suggest that stimuli-responsiveness and overall swelling behavior of the polysaccharide multilayer films significantly depend on the outermost layer, an effect that should expectedly become more pronounced the thinner the film becomes.

Ternary hydrogels with tunable mechanical and self-healing properties based on the synergistic effects of multiple dynamic bonds

Ternary hydrogels with tunable mechanical properties were prepared based on the synergistic effects of hydrogen bonds and imine bonds.

Synthesis of compounds having antimicrobial activity from alginate

Compounds having antimicrobial activity were synthesized from sodium alginate, the main constituent of brown algae. Sodium alginate was oxidized with sodium periodate to get alginate dialdehyde (ADA). FTIR spectrum of the ADA gave very small peak characteristic for aldehyde groups at 1720 cm^-1, indicating that the aldehyde group is masked somehow. It may be hydrated, involving at hemiacetal formation or hemialdol, similar to cellulose dialdehyde. Two methods were used for the condensation of ADA with o-phenylenediamine analogs to obtain the final products. The first method was stirring at room temperature and the second method was heating in microwave. The microwave method gave higher yield and shorter reaction time than the other method. The condensation reaction is considered as a shiff-base formation and the proposed mechanism was suggested. The condensation products were characterized by FTIR and UV spectra. The antimicrobial potency for five of these products in addition to the used alginate and to the precursor amines was evaluated against four pathogenic fungi and six pathogenic bacteria species.

Structural Investigation of a Self-Cross-Linked Chitosan/Alginate Dialdehyde Multilayered Film with in Situ QCM-D and Spectroscopic Ellipsometry

A chitosan/alginate dialdehyde multilayered film was fabricated using the layer-by-layer assembly method. Besides electrostatic interaction that promotes alternate adsorption of the oppositely charged polyelectrolytes, the Schiff base reaction between the amine groups on chitosan and the aldehyde groups on alginate dialdehyde provides a covalently cross-linked film, which after reduction by sodium cyanoborohydride is stable under both acidic and alkaline conditions. Moreover, the cross-linked film is responsive to changes in pH and addition of multivalent salts. The structural properties of the multilayered film such as thickness, refractive index, and water content were examined using simultaneous quartz crystal microbalance with dissipation monitoring and spectroscopic ellipsometry.

Novel cationic tannin/glycosaminoglycan-based polyelectrolyte multilayers promote stem cells adhesion and proliferation

Condensed tannin is a biologically derived polycation that can be combined with glycosaminoglycans (chondroitin sulfate and heparin) to prepare polyelectrolyte multilayers that promote stem cell adhesion and proliferation.

Tuning the formation and stability of microcapsules by environmental conditions and chitosan structure

The goal of this work is to tune the formation and stability of the alginate-chitosan (AC) polyelectrolyte complexes (PECs) and microcapsules. Particularly, we explore the role of the conformation of chitosan on its interaction with alginate to understand the mechanism underpinning their interactions at the molecular level. Reducing the charge density by increasing pH will increase the compactness of chitosan, the values of the enthalpy (H) and stoichiometry (N) of binding between chitosan and alginate. Consequently, chitosan has advantage in being adsorbed on alginate beads to form microcapsules, including the binding rate and binding amount. Though the total heat release remain similar in the range of ionic strength, chitosan diffuses much easier into alginate hydrogels when in higher ionic strength. Increasing pH and ionic strength both help AC microcapsules to have higher stability. The results indicate that the formation and stability of AC microcapsules are related to the rigidity and conformations of chitosan molecules. After increasing acetylation degree (DA) of chitosan, the binding rate of chitosan and mechanical strength of AC microcapsules are both reduced. This work demonstrates the versatility and feasibility of tuning the formation and stability of polysaccharide microcapsules by physical factors and chitosan chemical structures.