Efficient Tumor Accumulation, Penetration and Tumor Growth Inhibition Achieved by Polymer Therapeutics: The Effect of Polymer Architectures

Additive-anchored thermoresponsive nanoscale self-assembly generation in normal and reverse Tetronics®

Self-assembly of ethylene oxide (EO)-propylene oxide (PO)-based star-shaped block copolymers (BCPs) in the presence of different kinds of additives is investigated in an aqueous solution environment. Commercially available four-armed BCPs, namely Tetronics® (normal: T904 with EO as the terminal end block; and reverse: T90R4 with PO as the terminal end block), each with 40%EO, are used. The effect of various additives such as electrolytes (NaCl and Na2SO4), nonelectrolyte polyols (glucose and sorbitol), and ionic surfactants (viz. anionic-sodium dodecyl sulfate (SDS), cationic-dodecyltrimethylammonium bromide (DTAB) and zwitterionic dodecyldimethylammonium propane sulfonate (C12PS)) on these BCPs is examined to observe their influence on micellization behaviour. The presence of salts and polyols displayed interesting phase behaviour, i.e., the cloud point (CP) was decreased, the water structure was affected and the micelles were dehydrated by expelling water molecules, and thus they were likely to promote micelle formation/growth. In contrast, ionic surfactants in small amounts interacted with the BCPs and showed an increase in CPs thereby forming mixed micelles with increasing charges and decreasing micellar sizes, finally transforming to small surfactant-rich mixed micelles. Molecular interactions such as electrostatic and hydrogen bonding involved within the examined entities are put forth employing a computational simulation approach using the Gaussian 09 window for calculation along with the GaussView 5.0.9 programming software using the (DFT)/B3LYP method and 3-21G basis set. The hydrodynamic diameter (Dh) of the micelles is examined using dynamic light scattering (DLS), while the various micellar parameters inferring the shape/geometry are obtained using small-angle neutron scattering (SANS) by the best fitting of the structure factors. It is observed that 10 w/v% T904 remains as spherical micelles with some micellar growth under physiological conditions (37 °C), while 10 w/v% T90R4 remains as unimers and forms spherical micelles in the presence of additives at 37 °C. Furthermore, the additive-induced micellar systems are tested as developing nanovehicles for anticancer (curcumin, Cur) drug solubilization using UV-vis spectroscopy, which shows a prominent increase in absorbance with enhanced solubilization capacity. Additionally, the cytotoxic effect of Cur loaded on the BCP micelles in HeLa cells is studied through confocal microscopy by capturing fluorescence images that depict HeLa cell growth inhibition under the influence of additive-induced micellar systems.

Prodrug Nanosensitizer Overcomes the Radiation Resistance of Hypoxic Tumor

Clinical radiation therapy (RT) is often hindered by the low radiation energy absorption coefficient and the hypoxic features of tumor tissues. Among the tremendous efforts devoted to overcoming the barriers to efficient RT, the application of hypoxic radiosensitizers and cell-cycle-specific chemotherapeutics has shown great potential. However, their effectiveness is often compromised by their limited bioavailability, especially in the hypoxic region, which plays a major role in radioresistance. Herein, to simultaneously improve the delivery efficacy of both hypoxic radiosensitizer and cell-cycle-specific drug, a gambogic acid (GA) metronidazole (MN) prodrug (GM) was designed and synthesized based on GA, a naturally occurring chemotherapeutic and multiple pathway inhibitor, and MN, a typical hypoxic radiosensitizer. In combination with MN-containing block copolymers, the prodrug nanosensitizer (NS) of GM was obtained. Owing to the bioreduction of MN, the as-designed prodrug could be efficiently delivered to hypoxic cells and act on mitochondria to cause the accumulation of reactive oxygen species. The strong G₂/M phase arrest caused by the prodrug NS could further sensitize treated cells to external radiation under hypoxic conditions by increasing DNA damage and delaying DNA repair. After coadministration of the NS with a well-established tissue-penetrating peptide, efficient tumor accumulation, deep tumor penetration, and highly potent chemoradiotherapy could be achieved.

Co-Delivery of Precisely Prescribed Multi-Prodrug Combination by an Engineered Nanocarrier enables Efficient Individualized Cancer Chemotherapy

The limited anticancer drug library and the frequent occurrence of drug resistance have driven monotherapy-based cancer therapy into a difficult situation. Considering the formidable process of new drug discovery, combination therapy using currently available drugs is a potential alternative. Nevertheless, the barrier between in vitro combination screening and precise in vivo delivery remains insurmountable in the current free-drug- or nanoparticle (NP)-based combination therapy, which substantially hinders the application of combination therapy. Herein, a novel, precise drug delivery strategy to realize efficient and individualized combination therapy is proposed. Nanomedicine (NM) is engineered using a microfluidics-based mixer by combining rationally designed polymeric prodrugs of three commercial chemotherapeutics and a cascade-responsive block copolymer; the NM possesses ratiometric drug loading and synchronized drug release. In addition to quantitative drug loading and precisely controlled drug combination, consistent nanoproperties of these NPs make their in vivo fate predictable. Consequently, tumor growth and metastasis can be effectively inhibited by precisely prescribed NPs derived from in vitro combination screening. This proof-of-concept study clearly reveals the feasibility of overcoming the current drug-library limitations through precise delivery of any predetermined drug combination, facilitating translational research of individualized combination therapy.

Tuning the Hydrophilic-Hydrophobic Balance of Molecular Polymer Bottlebrushes Enhances their Tumor Homing Properties

Nanoparticle (NP)-based drug delivery systems are promising in anticancer therapy, capable of delivering cargo with superior selectivity and achieving enhanced tumor accumulation compared to small-molecule therapeutics. As more efforts are being devoted to NP development, molecular polymer bottlebrushes (MPBs) have gained attention as a potential drug delivery vehicle. To date, the influence of various MPB parameters such as size, shape, and surface charge in determining tumor penetrability have been systematically probed. However, the role of amphiphilicity, specifically the hydrophilic-hydrophobic balance, remains unexplored. In this study, a series of MPBs are employed with varied hydrophobicity levels to reveal a dependence between MPB composition, cell association, and tumor homing. The data indicates that increasing levels of hydrophobicity in MPBs (to a certain level) demonstrate only marginal effects in vitro but reveals enhanced tumor homing in a mouse model of ovarian cancer in vivo, where more hydrophilic MPBs exhibit low tissue deposition and low tumor homing. In contrast, more hydrophobic MPBs show significant tumor accumulation and homing due to their engineered hydrophobicity.

Research Progress and Prospects for Polymeric Nanovesicles in Anticancer Drug Delivery

Polymeric vesicles served as the most promising candidates of drug delivery nanocarriers are attracting increasing attention in cancer therapy. Significant advantages have been reported, including hydrophilic molecules with high loading capacity, controllable drug release, rapid and smart responses to stimuli and versatile functionalities. In this study, we have made a systematic review of all aspects of nano-vesicles as drug delivery vectors for cancer treatment, mainly including the following aspect: characteristics of polymeric nanovesicles, polymeric nanovesicle synthesis, and recent progress in applying polymeric nanovesicles in antitumor drug delivery. Polymer nanovesicles have the advantages of synergistic photothermal and imaging in improving the anticancer effect. Therefore, we believe that drug carrier of polymer nanovesicles is a key direction for cancer treatment.

Modulating cellular cytotoxicity and phototoxicity of fluorescent organic salts through counterion pairing

Light-activated theranostics offer promising opportunities for disease diagnosis, image-guided surgery, and site-specific personalized therapy. However, current fluorescent dyes are limited by low brightness, high cytotoxicity, poor tissue penetration, and unwanted side effects. To overcome these limitations, we demonstrate a platform for optoelectronic tuning, which allows independent control of the optical properties from the electronic properties of fluorescent organic salts. This is achieved through cation-anion pairing of organic salts that can modulate the frontier molecular orbital without impacting the bandgap. Optoelectronic tuning enables decoupled control over the cytotoxicity and phototoxicity of fluorescent organic salts by selective generation of mitochondrial reactive oxygen species that control cell viability. We show that through counterion pairing, organic salt nanoparticles can be tuned to be either nontoxic for enhanced imaging, or phototoxic for improved photodynamic therapy.

Micelles with Cyclic Poly(ε-caprolactone) Moieties: Greater Stability, Larger Drug Loading Capacity, and Slower Degradation Property for Controlled Drug Release

Polymer topology exerts a significant effect on its properties and performance for potential applications. Cyclic topology and its derived structures have been recently shown to outperform conventional linear analogues for drug delivery applications. However, an amphiphilic tadpole-shaped copolymer consisting of a cylic hydrophobic moiety has rarely been explored. For this purpose, a tadpole-shaped amphiphilic diblock copolymer of poly(ethylene oxide)-b-(cyclic poly(ε-caprolactone)) (mPEG-b-cPCL) was synthesized successfully via ring-opening polymerization (ROP) of ε-CL using a mPEG-based macroinitiator with both a hydroxyl and an azide termini and subsequent intrachain Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAc) click cyclization. A comparison study on the self-assembly behaviors, in vitro drug loading and drug release profiles, and degradation properties of the resulting mPEG-b-cPCL (C) with those of the linear counterpart (mPEG-b-PCL, L) revealed that mPEG-b-cPCL micelles are a better formulation than the micelles formed by the linear counterparts in terms of micelle stability, drug loading capacity, and the degradation property. Interestingly, compared to the single degradation of L, C exhibited a slower two-stage degradation process including the topological change from tadpole shape to linear conformation and the subsequent degradation of a linear polymer. This study therefore uncovered the topological effect of a hydrophobic moiety on the properties of the self-assembled micelles and developed a complementary alternative to enhance the micelle stability by introducing a cyclic hydrophobic segment.

Shell-Sheddable Poly(N-2-hydroxypropyl methacrylamide) Polymeric Micelles for Dual-Sensitive Release of Doxorubicin

Poly(ethylene glycol) (PEG) shell-sheddable micelles are proved to be effective tools for rapid intracellular drug delivery. However, some adverse factors, such as the potential immunogenicity and the accelerated blood clearance, might be accompanied with the traditional PEG sheddable micelles. Here, a poly(N-2-hydroxypropyl methacrylamide) (PHPMA) sheddable block copolymer containing disulfide bonds on the main chain is prepared to form pH- and reduction-dual-responsive micelles. The most optimal synthetic route of the block copolymer is selected from three potential pathways. Doxorubicin is loaded via an acid-labile hydrazone bond to achieve high drug loading content and to prevent premature drug release. As expected, as-prepared shell-sheddable micelles exhibit faster intracellular drug release and more satisfactory in vitro anticancer efficacy than the nonsheddable counterpart did. This design provides a feasible guideline for the efficient synthesis of similar shell-sheddable micelles consisting of PHPMA coatings.

Switchable 19F MRI polymer theranostics: towards in situ quantifiable drug release

A switchable polymeric ¹⁹F magnetic resonance imaging (MRI) contrast agent was synthesised whereby the transverse (T₂) relaxation times increased as a therapeutic was released from a hyperbranched polymer (HBP) scaffold.