Importance of Evaluating Dynamic Encapsulation Stability of Amphiphilic Assemblies in Serum

Bacteria for Bioplastics: Progress, Applications, and Challenges

Bioplastics are one of the answers that can point society toward a sustainable future. Under this premise, the synthesis of polymers with competitive properties using low-cost starting materials is a highly desired factor in the industry. Also, tackling environmental issues such as nonbiodegradable waste generation, high carbon footprint, and consumption of nonrenewable resources are some of the current concerns worldwide. The scientific community has been placing efforts into the biosynthesis of polymers using bacteria and other microbes. These microorganisms can be convenient reactors to consume food and agricultural wastes and convert them into biopolymers with inherently attractive properties such as biodegradability, biocompatibility, and appreciable mechanical and chemical properties. Such biopolymers can be applied to several fields such as packing, cosmetics, pharmaceutical, medical, biomedical, and agricultural. Thus, intending to elucidate the science of microbes to produce polymers, this review starts with a brief introduction to bioplastics by describing their importance and the methods for their production. The second section dives into the importance of bacteria regarding the biochemical routes for the synthesis of polymers along with their advantages and disadvantages. The third section covers some of the main parameters that influence biopolymers' production. Some of the main applications of biopolymers along with a comparison between the polymers obtained from microorganisms and the petrochemical-based ones are presented. Finally, some discussion about the future aspects and main challenges in this field is provided to elucidate the main issues that should be tackled for the wide application of microorganisms for the preparation of bioplastics.

Current Principles, Challenges, and New Metrics in pH-Responsive Drug Delivery Systems for Systemic Cancer Therapy

The paradigm of drug delivery via particulate formulations is one of the leading ideas that enable overcoming limitations of traditional chemotherapeutic agents. The trend toward more complex multifunctional drug carriers is well-traced in the literature. Nowadays, the prospectiveness of stimuli-responsive systems capable of controlled cargo release in the lesion nidus is widely accepted. Both endogenous and exogenous stimuli are employed for this purpose; however, endogenous pH is the most common trigger. Unfortunately, scientists encounter multiple challenges on the way to the implementation of this idea related to the vehicles' accumulation in off-target tissues, their immunogenicity, the complexity of drug delivery to intracellular targets, and finally, the difficulties in the fabrication of carriers matching all imposed requirements. Here, we discuss fundamental strategies for pH-responsive drug delivery, as well as limitations related to such carriers' application, and reveal the main problems, weaknesses, and reasons for poor clinical results. Moreover, we attempted to formulate the profiles of an "ideal" drug carrier in the frame of different strategies drawing on the example of metal-comprising materials and considered recently published studies through the lens of these profiles. We believe that this approach will facilitate the formulation of the main challenges facing researchers and the identification of the most promising trends in technology development.

Practical application of nanoencapsulated nutraceuticals in real food products; a systematic review

In recent decades, due to the increase in awareness, most consumers prefer foods that not only satisfy their primal urge of hunger but also include health-promoting effects on the body. Therefore, the food industry has an increasing tendency to apply the nutrients (like vitamins, essential fatty acids and minerals) and replace synthetic additives with natural bioactives (like phenolics and essential oils) to produce functional products. However, low dispersibility and shelf-stability as well as presenting unpleasant taste and odor are the most critical barriers for direct incorporation of these useful compounds into foods. In this context, nanoencapsulation has been proposed as a relatively new solution to overcome the mentioned limitations. However, fewer studies have focused on incorporating the bioactive-loaded nanocarriers into the food matrices. This study intends to help the development of functional food production by doing an exhaustive review on the incorporation of nanoencapsulated ingredients into the real food system and resulted interaction of nanocarriers and food products. According to the literature, incorporation of the nanoencapsulated bioactive ingredients into foods can be effectively used to enhance their stability during the processing and storage stage and their bioavailability as well as to delay lipid oxidation and microbial growth in food, without negatively affecting physicochemical, organoleptic and qualitative properties. However, some published results to date declared that food matrix might adversely affect the bioavailability and antimicrobial activity of nanoencapsulated ingredients. It seems that further studies are required to contribute to the choice of appropriate healthy ingredients and wall materials for incorporating into a given food structure.

Improved Core Viscosity Achieved by PDLLA10kCo-Incorporation Promoted Drug Loading and Stability of mPEG2k-b-PDLLA2.4k Micelles

PURPOSE

This study aims to investigate the effect of poly(D, L-lactic acid)10K (PDLLA10K) incorporation on the drug loading and stability of poly(ethylene glycol)2K-block-poly(D, L-lactide)2.4K (mPEG2k-b-PDLLA2.4k) micelles. In addition, a suitable lyophilization protector was screened for this micelle to obtain favorable lyophilized products.

METHODS

The incorporation ratios of PDLLA10k were screened based on the particle size and drug loading. The dynamic stability, core viscosity, drug release, stability in albumin, and in vivo pharmacokinetic characteristics of PDLLA10k incorporated micelles were compared with the original micelles. In addition, the particle size variation was used as an indicator to screen the most suitable lyophilization protectant for the micelles. DSC, FTIR, XRD were used to illustrate the mechanism of the lyophilized protectants.

RESULTS

After the incorporation of 5 wt% PDLLA10K, the maximum loading of mPEG2k-b-PDLLA2.4k micelles for TM-2 was increased from 26 wt% to 32 wt%, and the in vivo half-life was increased by 2.25-fold. Various stability of micelles was improved. Also, the micelles with hydroxypropyl-β-cyclodextrin (HP-β-CD) as lyophilization protectants had minimal variation in particle size.

CONCLUSIONS

PDLLA10k incorporation can be employed as a strategy to increase the stability of mPEG2k-b-PDLLA2.4k micelles, which can be attributed to the viscosity building effect. HP-β-CD can be used as an effective lyophilization protectant since mPEG and HP-β-CD form the pseudopolyrotaxanesque inclusion complexes.

Evaluating Endosomal Escape of Caspase-3-Containing Nanomaterials Using Split GFP

The ability for biologics to access intracellular targets hinges on the translocation of active, unmodified proteins. This is often achieved using nanoscale formulations, which enter cells through endocytosis. This uptake mechanism often limits the therapeutic potential of the biologics, as the propensity of the nanocarrier to escape the endosome becomes the key determinant. To appropriately evaluate and compare competing delivery systems of disparate compositions, it is therefore critical to assess endosomal escape efficiencies. Unfortunately, quantitative tools to assess endosomal escape are lacking, and standard approaches often lead to an erroneous interpretation of cytosolic localization. In this study we use a split-complementation endosomal escape (SEE) assay to evaluate levels of cytosolic caspase-3 following delivery by polymer nanogels and mesoporous silica nanoparticles. In particular, we use SEE as a means to enable the systematic investigation of the effect of polymer composition, polymer architecture (random vs block), hydrophobicity, and surface functionality. Although polymer structure had little influence on endosomal escape, nanogel functionalization with cationic and pH-sensitive peptides significantly enhanced endosomal escape levels and, further, significantly increased the amount of nanogel per endosome. This work serves as a guide for developing an optimal caspase-3 delivery system, as this caspase-3 variant can be easily substituted for a therapeutic caspase-3 cargo in any system that results in cytosolic accumulation and cargo release. In addition, these data provide a framework that can be readily applied to a wide variety of protein cargos to assess the independent contributions of both uptake and endosomal escape of a wide range of protein delivery vehicles.

Judging Enzyme-Responsive Micelles by Their Covers: Direct Comparison of Dendritic Amphiphiles with Different Hydrophilic Blocks

Enzymatically degradable polymeric micelles have great potential as drug delivery systems, allowing the selective release of their active cargo at the site of disease. Furthermore, enzymatic degradation of the polymeric nanocarriers facilitates clearance of the delivery system after it has completed its task. While extensive research is dedicated toward the design and study of the enzymatically degradable hydrophobic block, there is limited understanding on how the hydrophilic shell of the micelle can affect the properties of such enzymatically degradable micelles. In this work, we report a systematic head-to-head comparison of well-defined polymeric micelles with different polymeric shells and two types of enzymatically degradable hydrophobic cores. To carry out this direct comparison, we developed a highly modular approach for preparing clickable, spectrally active enzyme-responsive dendrons with adjustable degree of hydrophobicity. The dendrons were linked with three different widely used hydrophilic polymers—poly(ethylene glycol), poly(2-ethyl-2-oxazoline), and poly(acrylic acid) using the CuAAC click reaction. The high modularity and molecular precision of the synthetic methodology enabled us to easily prepare well-defined amphiphiles that differ either in their hydrophilic block composition or in their hydrophobic dendron. The micelles of the different amphiphiles were thoroughly characterized and their sizes, critical micelle concentrations, drug loading, stability, and cell internalization were compared. We found that the micelle diameter was almost solely dependent on the hydrophobicity of the dendritic hydrophobic block, whereas the enzymatic degradation rate was strongly dependent on the composition of both blocks. Drug encapsulation capacity was very sensitive to the type of the hydrophilic block, indicating that, in addition to the hydrophobic core, the micellar shell also has a significant role in drug encapsulation. Incubation of the spectrally active micelles in the presence of cells showed that the hydrophilic shell significantly affects the micellar stability, localization, cell internalization kinetics, and the cargo release mechanism. Overall, the high molecular precision and the ability of these amphiphiles to report their disassembly, even in complex biological media, allowed us to directly compare the different types of micelles, providing striking insights into how the composition of the micelle shells and cores can affect their properties and potential to serve as nanocarriers.

Correlation between in vitro stability and pharmacokinetics of poly(ε-caprolactone)-based micelles loaded with a photosensitizer

Polymeric micelles are extensively investigated as drug delivery systems for hydrophobic drugs including photosensitizers (PSs). In order to benefit from micelles as targeted delivery systems for PS, rather than only solubilizers, the stability and cargo retention of the (PS-loaded) micelles should be properly assessed in biologically relevant media to get insight into the essential parameters predicting their in vivo performance (i.e., pharmacokinetics). In the present study, asymmetric flow field-flow fractionation (AF4) was used to investigate the in vitro stability in human plasma of empty and meta-tetra(hydroxyphenyl)chlorin (mTHPC)-loaded dithiolane-crosslinked micelles based on poly(ɛ-caprolactone)-co-poly(1,2-dithiolane‑carbonate)-b-poly(ethylene glycol) (p(CL-co-DTC)-PEG) and non (covalently)-crosslinked micelles composed of poly(ε-caprolactone)-b-poly(ethylene glycol) (pCL-PEG). AF4 allows separation of the micelles from plasma proteins, which showed that small non (covalently)-crosslinked pCL₉-PEG (17 nm) and pCL₁₅-PEG (22 nm) micelles had lower stability in plasma than pCL₂₃-PEG micelles with larger size (43 nm) and higher degree of crystallinity of pCL, and had also lower stability than covalently crosslinked p(CL₉-DTC_3.9)-PEG and p(CL₁₈-DTC_7.5)-PEG micelles with similar small sizes (~20 nm). In addition, PS (re)distribution to specific plasma proteins was observed by AF4, giving strong indications for the (in)stability of PS-loaded micelles in plasma. Nevertheless, fluorescence spectroscopy in human plasma showed that the retention of mTHPC in non (covalently)-crosslinked but semi-crystalline pCL₂₃-PEG micelles (>8 h) was much longer than that in covalently crosslinked p(CL₁₈-DTC_7.5)-PEG micelles (~4 h). In line with this, in vivo circulation kinetics showed that pCL₂₃-PEG micelles loaded with mTHPC had significantly longer half-life values (t½-β of micelles and mTHPC was 14 and 18 h, respectively) than covalently crosslinked p(CL₁₈-DTC_7.5)-PEG micelles (t½-β of both micelles and mTHPC was ~2 h). As a consequence, long circulating pCL₂₃-PEG micelles resulted in significantly higher tumor accumulation of both the micelles and loaded mTHPC as compared to short circulating p(CL₁₈-DTC_7.5)-PEG micelles. These in vivo data were in good agreement with the in vitro stability studies. In conclusion, the present study points out that AF4 and fluorescence spectroscopy are excellent tools to evaluate the (in)stability of nanoparticles in biological media and thus predict the (in)stability of drug loaded nanoparticles after i.v. administration, which is favorable to screen promising delivery systems with reduced experimental time and costs and without excessive use of animals.

In Situ Formation of Polymeric Nanoassemblies Using an Efficient Reversible Click Reaction

Polymer-drug conjugates are promising as strategies for drug delivery, because of their high drug loading capacity and low premature release profile. However, the preparation of these conjugates is often tedious. In this paper, we report an efficient method for polymer-drug conjugates using an ultrafast and reversible click reaction in a post-polymerization functionalization strategy. The reaction is based on the rapid condensation of boronic acid functionalities with salicylhydroxamates. The polymer, bearing the latter functionality, has been designed such that the reaction with boronic acid bearing drugs induces an in situ self-assembly of the conjugates to form well-defined nanostructures. We show that this method is not only applicable for molecules with an intrinsic boronic acid group, but also for the other molecules that can be linked to aryl boronic acids through a self-immolative linker. The linker has been designed to cause traceless release of the attached drug molecules, the efficiency of which has been demonstrated through intracellular delivery.

Recent Advances in Bioplastics: Application and Biodegradation

The success of oil-based plastics and the continued growth of production and utilisation can be attributed to their cost, durability, strength to weight ratio, and eight contributions to the ease of everyday life. However, their mainly single use, durability and recalcitrant nature have led to a substantial increase of plastics as a fraction of municipal solid waste. The need to substitute single use products that are not easy to collect has inspired a lot of research towards finding sustainable replacements for oil-based plastics. In addition, specific physicochemical, biological, and degradation properties of biodegradable polymers have made them attractive materials for biomedical applications. This review summarises the advances in drug delivery systems, specifically design of nanoparticles based on the biodegradable polymers. We also discuss the research performed in the area of biophotonics and challenges and opportunities brought by the design and application of biodegradable polymers in tissue engineering. We then discuss state-of-the-art research in the design and application of biodegradable polymers in packaging and emphasise the advances in smart packaging development. Finally, we provide an overview of the biodegradation of these polymers and composites in managed and unmanaged environments.

pH-responsive high stability polymeric nanoparticles for targeted delivery of anticancer therapeutics

The practical application of nanoparticles (NPs) as chemotherapeutic drug delivery systems is often hampered by issues such as poor circulation stability and targeting inefficiency. Here, we have utilized a simple approach to prepare biocompatible and biodegradable pH-responsive hybrid NPs that overcome these issues. The NPs consist of a drug-loaded polylactic-co-glycolic acid (PLGA) core covalently 'wrapped' with a crosslinked bovine serum albumin (BSA) shell designed to minimize interactions with serum proteins and macrophages that inhibit target recognition. The shell is functionalized with the acidity-triggered rational membrane (ATRAM) peptide to facilitate internalization specifically into cancer cells within the acidic tumor microenvironment. Following uptake, the unique intracellular conditions of cancer cells degrade the NPs, thereby releasing the chemotherapeutic cargo. The drug-loaded NPs showed potent anticancer activity in vitro and in vivo while exhibiting no toxicity to healthy tissue. Our results demonstrate that the ATRAM-BSA-PLGA NPs are a promising targeted cancer drug delivery platform.

Hyperbranched polydisulfides

Synthesis, aqueous aggregation, hydrophobic guest encapsulation, non-covalent encapsulation stability and glutathione responsive degradation of amphiphilic hyperbranched polydisulfides have been reported.

The Effect of Molecular Structure on Cytotoxicity and Antitumor Activity of PEGylated Nanomedicines

Fundamental studies on the cellular uptake and drug release of PEGylated nanomedicines are beneficial to understand their fate in vivo and construct ideal nanoparticle formulations. In this work, the detailed metabolic process of PEGylated doxorubicin (Dox) nanomedicines were investigated via confocal laser scanning microscopy (CLSM), flow cytometry (FCM), cytotoxicity test, fluorescence imaging in vivo (FLIV) and liquid chromatography tandem mass spectrometry (LC-MS/MS). Among them, only LC-MS/MS could accurately determine the content of PEGylated Dox and Dox in vitro and in vivo. To the best of our knowledge, this was the first time the PEGylated Dox and released Dox were simultaneously quantified. The interplay of molecular structures, cellular uptake, drug release, and antitumor effect was well characterized. PEG with high molecular weight impeded the cellular uptake of nanoparticles, and the acid-labile hydrazone bond between Dox and PEG promoted Dox release significantly. Cellular uptake and drug release play decisive roles in cytotoxicity and antitumor effect, as evidenced by LC-MS/MS. We emphasized that LC-MS/MS would be a practicable method to quantify PEGylated drugs without complex tags, which could be more in-depth to understand the interaction between PEGylated nanomedicines and their antitumor efficacy.