Durable Anti-Superbug Polymers: Covalent Bonding of Ionic Liquid onto the Polymer Chains

Engineered and Durable Antimicrobial Polymer via Controllable Immobilization of Ionic Liquids onto the Poly(lactic acid) Chains

Nowadays, the development of effective modification methods for PLA has gained significant interest because of the wide application of antimicrobial PLA materials in the medical progress. Herein, the ionic liquid (IL) 1-vinyl-3-butylimidazolium bis(trifluoromethylsulfonyl)imide, has been grafted onto the PLA chains successfully in the PLA/IL blending films via electron beam (EB) radiation for the miscibility between PLA and IL. It was found that the existence of IL in the PLA matrix can significantly improve the chemical stability under EB radiation. The Mn of PLA-g-IL copolymer did not change obviously but was just decreased from 6.80 × 104 g/mol to 5.20 × 104 g/mol after radiation with 10 kGy. The obtained PLA-g-IL copolymers showed excellent filament forming property during electrospinning process. The spindle structure on the nanofibers can be completely eliminated after feeding only 0.5 wt % ILs for the improvement of ionic conductivity. Specially, the prepared PLA-g-IL nonwovens exhibited outstanding and durable antimicrobial activity for the enrichment of immobilized ILs on the nanofiber surface. This work provides a feasible strategy to realize the modification of functional ILs onto PLA chains with low EB radiation doses, which may have huge potential application in the medical and packaging industry.

Chitosan, alginate, hyaluronic acid and other novel multifunctional hydrogel dressings for wound healing: A review

Wound healing is a complex project, and effectively promoting skin repair is a huge clinical challenge. Hydrogels have great prospect in the field of wound dressings because their physical properties are very similar to those of living tissue and have excellent properties such as high water content, oxygen permeability and softness. However, the single performance of traditional hydrogels limits their application as wound dressings. Therefore, natural polymers such as chitosan, alginate and hyaluronic acid, which are non-toxic and biocompatible, are individually or combined with other polymer materials, and loaded with typical drugs, bioactive molecules or nanomaterials. Then, the development of novel multifunctional hydrogel dressings with good antibacterial, self-healing, injectable and multi-stimulation responsiveness by using advanced technologies such as 3D printing, electrospinning and stem cell therapy has become a hot topic of current research. This paper focuses on the functional properties of novel multifunctional hydrogel dressings such as chitosan, alginate and hyaluronic acid, which lays the foundation for the research of novel hydrogel dressings with better performance.

Humidity-Responsive Antimicrobial Membranes Based on Cross-Linked Copolymers Functionalized with Ionic Liquid Moieties

Humidity-responsive materials have attracted increasing attention for their potential use in various applications, e.g., sensors, soft robotics, and human-machine interfaces. Much effort has been focused on the use of ionic liquids for the construction of humidity-responsive sensors; yet, not enough attention has been paid on the susceptibility of the used poly(ionic liquid)s to microorganisms. This is especially relevant to the wide use of the polymers for biomedical applications, e.g., wearable body-condition sensors or healthcare control systems. We herein describe the development of dual functional, self-standing, monolayer antimicrobial membranes derived from cross-linked copolymers functionalized with ionic liquids. In a first step, random copolymers of poly(4-vinylbenzyl N-alkyl imidazolium chloride-co-acrylic acid), P(VBCImC_n-co-AA20), were synthesized bearing aliphatic chains of different lengths (where n = 1, 4, 8, 12, 16 carbon atoms) to investigate the effect of hydrophobicity/hydrophilicity on the humidity-responsive properties of the copolymer and its antimicrobial activity. The aforementioned copolymers were later blended with the complementary reactive copolymers of poly(cetyl trimethylammonium 4-styrene sulfonate-co-glycidyl methacrylate), P(SSAmC₁₆-co-GMA20), to provide highly stable films and coatings through thermal cross-linking. The membrane P(VBCImC₁₂-co-AA20)/P(SSAmC₁₆-co-GMA20) with a molar ratio of 3:1 (mol AA/mol GMA) exhibited immediate and high response to moisture through folding or flipping motions when placed on a wet filter paper or on the palm of a hand. The inhibition of growth for selected bacterial species (Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus) on the copolymer membranes was dependent on the length of the imidazolium alkyl chain and the species. Additionally, in the case of the cross-linked P(VBCImC_n-co-AA20)/P(SSAmC₁₆-co-GMA20) membranes, the overall efficacy was very high against all microorganisms tested, which, combined with their high humidity responsiveness, enables their potential application.

A 3D bioprinted decellularized extracellular matrix/gelatin/quaternized chitosan scaffold assembling with poly(ionic liquid)s for skin tissue engineering

Currently, a suitable bioink for 3D bioprinting and capable of mimicking the microenvironment of native skin and preventing bacterial infection remains a major challenge in skin tissue engineering. In this study, we prepared a tissue-specific extracellular matrix-based bioink, and dECM/Gel/QCS (dGQ) 3D scaffold assembling with poly(ionic liquid)s (PILs) (dGQP) was obtained by an extrusion 3D bioprinting technology and dynamic hydrogen bonding method. The morphologies, mechanical properties, porosity, hydrophilicity, biodegradation, hemostatic effect, antibacterial ability, and biocompatibility of the hybrid scaffolds were characterized and evaluated. Results showed that the rapid release (2 h) of PILs on the dGQP scaffold can quickly kill gram-negative (E. coli) and gram-positive (S. aureus) bacteria with almost 100 % antibacterial activity and maintained a stable sterile environment for a long time (7 d), which was superior to the dGQ scaffold. The hemostasis and hemolysis test showed that the dGQP scaffold had a good hemostatic effect and excellent hemocompatibility. In vitro cytocompatibility studies showed that although the cell growth on dGQP scaffold was slow in the early stage, the cells proliferated rapidly since day 4 and had high ECM secretion at day 7. Overall, this advanced dGQP scaffold has a considerable potential to be applied in skin tissue engineering.

Fast Gelation of Poly(ionic liquid)-Based Injectable Antibacterial Hydrogels

Traditional antibacterial hydrogels have a broad-spectrum bactericidal effect and are widely used as wound dressings. However, the biological toxicity and drug resistance of these antibacterial hydrogels cannot meet the requirements of long-term clinical application. Imidazolium poly(ionic liquids) (PILs) are polymeric antibacterial agents exhibiting strong antibacterial properties, as they contain a strong positive charge. In this study, two imidazolium PILs, namely poly(N-butylimidazolium propiolic acid sodium) (PBP) and poly(N-(3,6-dioxaoctane) imidazolium propiolic acid sodium) (PDP), as high efficiency antibacterial agents, were synthesized by polycondensation reaction. Then, the PILs were compounded with polyethylene glycol (PEG) by a thiol-yne click reaction to prepare injectable antibacterial hydrogels. An in vitro assay showed that the injectable antibacterial hydrogels could not only quickly kill Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), but also had low toxicity for human skin fibroblasts cells (HSFs) and human umbilical vein endothelial cells (HUVECs), respectively. Additionally, the lipopolysaccharide (LPS) inflammation model revealed that the injectable antibacterial hydrogels also had anti-inflammatory effects, which would be advantageous to accelerate wound healing.

Recent Advances in Ionic Liquids in Biomedicine

The use of ionic liquids and deep eutectic solvents in biomedical applications has grown dramatically in recent years due to their unique properties and their inherent tunability. This review will introduce ionic liquids and deep eutectics and discuss their biomedical applications, namely solubilization of drugs, creation of active pharmaceutical ingredients, delivery of pharmaceuticals through biological barriers, stabilization of proteins and other nucleic acids, antibacterial agents, and development of new biosensors. Current challenges and future outlooks are discussed, including biocompatibility, the potential impact of the presence of impurities, and the importance of understanding the microscopic interactions in ionic liquids in order to design task-specific solvents.

Quaternary Ammonium Compounds (QACs) and Ionic Liquids (ILs) as Biocides: From Simple Antiseptics to Tunable Antimicrobials

Quaternary ammonium compounds (QACs) belong to a well-known class of cationic biocides with a broad spectrum of antimicrobial activity. They are used as essential components in surfactants, personal hygiene products, cosmetics, softeners, dyes, biological dyes, antiseptics, and disinfectants. Simple but varied in their structure, QACs are divided into several subclasses: Mono-, bis-, multi-, and poly-derivatives. Since the beginning of the 20th century, a significant amount of work has been dedicated to the advancement of this class of biocides. Thus, more than 700 articles on QACs were published only in 2020, according to the modern literature. The structural variability and diverse biological activity of ionic liquids (ILs) make them highly prospective for developing new types of biocides. QACs and ILs bear a common key element in the molecular structure-quaternary positively charged nitrogen atoms within a cyclic or acyclic structural framework. The state-of-the-art research level and paramount demand in modern society recall the rapid development of a new generation of tunable antimicrobials. This review focuses on the main QACs exhibiting antimicrobial and antifungal properties, commercial products based on QACs, and the latest discoveries in QACs and ILs connected with biocide development.

A novel hydrogel with self-healing property and bactericidal activity

In this study, we have designed and synthesized a novel poly (4 - vinyl benzene boronic acid - co - N - vinyl pyrrolidone - co - 1 - vinyl - 3 - butylimidazolium bromide) hydrogel (VNV hydrogel) dressing with good self-healing properties and bactericidal activity. The gelation and self-healing of this hydrogel are mainly achieved by the formation of a dynamic B-O-B bond between the polymer chains, which is fractured by external forces and subsequently reformed. This self-healing mechanism is studied in detail through the molecular design of the hydrogel. The introduction of hydrophilic chemical groups can effectively improve the porous structures, water absorption and molecular migration. These properties have a positive effect on improving self-healing properties of dynamic crosslinked hydrogels. Furthermore, this VNV hydrogel dressing displays good antibacterial activity against E. coli, S. aureus, and C. albicans. The application of VNV hydrogel dressing on rat wound surface can effectively accelerate wound healing. These results indicate that this novel VNV hydrogel dressing with good self-healing properties and bactericidal activity has potential applications in wound dressings.

Microdesigned Nanocellulose-Based Flexible Antibacterial Aerogel Architectures Impregnated with Bioactive Cinnamomum cassia

This work is strategically premeditated to study the potential of a herbal medicinal product as a natural bioactive ingredient to generate nanocellulose-based antibacterial architectures. In situ fibrillation of purified cellulose was done in cinnamon extract (ciE) to obtain microfibrillated cellulose (MFC). To this MFC suspension, carboxylated cellulose nanocrystals (cCNCs) were homogeneously mixed and the viscous gel thus obtained was freeze-dried to obtain lightweight and flexible composite aerogel architectures impregnated with ciE, namely, ciMFC/cCNCs. At an optimal concentration of 0.3 wt % cCNCs (i.e., for ciMFC/cCNCs_0.3), an improvement of around 106% in compressive strength and 175% increment in modulus were achieved as compared to pristine MFC architecture. The efficient loading and interaction of ciE components, specifically cinnamaldehyde, with MFC and cCNCs resulted in developing competent antibacterial surfaces with dense and uniform microstructures. Excellent and long-term antimicrobial activity of the optimized architectures (ciMFC/cCNCs_0.3) was confirmed through various antibacterial assays like the zone inhibition method, bacterial growth observation at OD₆₀₀, minimum inhibitory concentration (MIC, here 1 mg/mL), minimum bactericidal concentration (MBC, here 3-5 mg/mL), and Live/Dead BacLight viability tests. The changes in the bacterial morphology with a disrupted membrane were further confirmed through various imaging techniques like confocal laser scanning microscopy, FESEM, AFM, and 3D digital microscopy. The dry composite architecture showed the persuasive capability of suppressing the growth of airborne bacteria, which in combination with antibacterial efficiency in the wet state is considered as an imperative aspect for a material to act as the novel biomaterial. Furthermore, these architectures demonstrated excellent antibacterial performance under real "in use" contamination prone conditions. Hence, this work provides avenues for the application of crude natural extracts in developing novel forms of advanced functional biomaterials that can be used for assorted biological/healthcare applications such as wound care and antimicrobial filtering units.

Anti-biofouling microfiltration membranes based on 1-vinyl-3-butylimidazolium chloride grafted PVDF with improved bactericidal properties and vitro biocompatibility

Polyvinylidene fluoride (PVDF) porous membranes have been widely used as the filtration and separation industry. Herein, novel microfiltration membranes based on 1-vinyl-3-butylimidazolium chloride ([VBIm][Cl]) grafted PVDF (PVDF-g-[VBIm][Cl]) were prepared via the non-solvent induced phase separation method. The chemical composition and microstructure of PVDF-g-[VBIm][Cl] membranes were characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, Scanning electron microscopy and Water contact angle measurements. The results showed that an increasing in [VBIm][Cl] grafting content leads to the increasing hydrophilicity and wetting capacity of the PVDF-g-[VBIm][Cl] porous membranes. The anti-biofouling properties of membranes were evaluated by measuring the water flux before and after Bovine serum albumin solution treatment. It was found that the modified membranes presented a good anti-biofouling property. The degree of irreversible flux loss caused by protein adsorption dramatically reduced from 42.1% to 2.9% compared with the pristine hydrophobic PVDF membranes. Meanwhile, these PVDF-g-[VBIm][Cl] membranes also exhibited excellent bactericidal properties against both gram-positive bacteria Staphylococcus saureus and gram-negative bacteria Escherichia coli, while PVDF membranes did not show any antibacterial activity. The vitro biocompatibility of the modified membranes was studied by hemolysis analysis, the platelet adhesion observation, thromboelastography assay and cytotoxicity assay. It was found that the incorporation of [VBIm][Cl] into PVDF membranes has less effect on the hemolysis and cytotoxicity of PVDF membranes. Furthermore, both hydrophilicity and charges of the membrane surface played important role in the adhesion and activation of platelet cells, which consequently affected the clotting process of whole blood. The membrane with appropriate [VBIm][Cl] grafting ratio (2.94 wt.%) exhibited good hemocompatibility with less blood coagulation effect. As an ultrafiltration membrane, PVDF-g-[VBIm][Cl] membranes have potential applications in the biomedical field due to the improved antibacterial property and biocompatibility.

Ionic Liquids Grafted Cellulose Nanocrystals for High-Strength and Toughness PVA Nanocomposite

The surface functionalization of cellulose nanocrystals (CNCs) is of significant importance for promoting its diverse applications. However, the efficient strategy reported so far for cation functionalization of CNCs remains limited owing to the electrostatic attraction between cationic modifiers and electronegative CNCs. Herein, a cationized CNC (CNC-LA-IL) has been successfully prepared in aqueous media by grafting the [VBIm][BF₄], a kind of ionic liquid (IL), on the surface of a sulfated CNC using lactic acid (LA) as a linker molecule. This surface functionalization not only converts the negative charge of CNC suspensions to a positive charge (zeta potential reversed from -35 to +40 mV) but also leads to enhanced thermal stability and redispersibility of the dried CNC. To examine the reinforcing effect of IL-modified CNCs, poly(vinyl alcohol) (PVA)/CNC-LA-IL nanocomposite films were further prepared by the solution casting method. To one's surprise, the as-prepared PVA/CNC-LA-IL films exhibit extraordinary improvement in both the tensile strength (92%) and the toughness (166%) with only a 0.3 wt % CNC loading. This study provides a green and facile method to achieve ionic liquids grafted CNCs for high-performance nanocomposites.

Ionic Liquid-Functionalized Multiwalled Carbon Nanotube-Based Hydrophobic Coatings for Robust Antibacterial Applications

In recent years, the biomimetic superhydrophobic coatings have received tremendous attention, owing to their potential in fabricating self-cleaning surfaces, in environmental applications. Consequently, extensive research has been devoted to create a superhydrophobic surface using the oxidized derivatives of CNTs and graphene. Thus, the design and development of a self-cleaning/superhydrophobic surface with good biocompatibility are an effective approach to deal with the bacterial infections related to biomedical devices used in hospitals. In this context, herein, we have developed the material based on ionic liquid (IL)-functionalized multiwalled carbon nanotubes (MWCNTs) for hydrophobic coatings, which was fully characterized with various techniques such as Fourier transform infrared, powder X-ray diffraction, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. We have evaluated the synthesized ILs for their antibacterial potential against the pathogenic bacterial strains such as Gram-positive (Staphylococcus aureus and methicillin-resistant S. aureus) and Gram-negative (Escherichia coli) bacterial strains. Further, atomic force and scanning electron microscopic studies have been performed to investigate the morphological changes to unravel the mechanism of action, whereas DNA binding study indicates the binding of IL-1d@MWCNT with DNA (K_a = 2.390 × 10⁴ M^-1). Furthermore, the developed material (IL-1d@MWCNT) is coated onto the surface of polyvinyl chloride (PVC) and evaluated for hydrophobicity through water contact angle measurements and possesses long-term antibacterial efficiency against both under-investigating pathogenic strains. For the biocompatibility assay, the obtained coated PVC material has also been evaluated for its cytotoxicity, and results reveal no toxicity against viable cells. These all results are taken together, indicating that by coating with the developed material IL-1d@MWCNT, a robust self-sterilizing surface has achieved, which helps in maintaining a bacteria-free surface.

Bactericidal and antifouling electrospun PVA nanofibers modified with a quaternary ammonium salt and zwitterionic sulfopropylbetaine

Bacterial adhesion and colonization on material surfaces have attracted great attention due to their potential threat to human health. Combining bactericidal and antifouling functions has been confirmed as an optimal strategy to prevent microbial infection. In this work, biodegradable electrospun polyvinyl alcohol (PVA) nanofibers were chosen due to its high specific area and abundant reactive hydroxyl groups. A quaternary ammonium salt (IQAS) and zwitterionic sulfopropylbetaine (ISB), both containing isocyanate (NCO) groups, were chemically bonded to the PVA nanofiber surface via a coupling reaction between the OH groups of the PVA nanofibers and the NCO groups of IQAS or ISB. The results indicated that the antimicrobial rates of PVA nanofibers modified by IQAS (0.5%) reached 99.9% against both gram-positive Staphylococcus aureus (S. aureus, ATCC 6538) and gram-negative Escherichia coli (E. coli, ATCC 25922). Additionally, the live/dead staining and cytotoxicity test indicated that the dual functional IQAS/ISB/PVA nanofibers exhibited excellent bactericidal and antifouling activities with low cytotoxicity. This work may provide practical guidelines to fabricate bactericidal and antifouling materials for healthcare applications, including but not limited to wound dressings, textile, food packaging and air filtration.

Responsive Ionogel Surface with Renewable Antibiofouling Properties

The synthesis of ionogels with a responsive, self-replenishing surface for combating biofouling is described. Ionogels are prepared by infiltrating poly(vinylidene fluoride-co-hexafluoropropylene) with binary mixtures of ionic liquids (IL): 1-octadecyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)imide ([C₁₈ C₁ im][NTf₂ ], melting point T_m = 55 °C) and 1-hexyl-3-methylimidazolium bis(trifluoromethyl sulfonyl)imide ([C₆ C₁ im][NTf₂ ], T_m = -9 °C). The IL mixtures release spontaneously from the gel matrix and eventually crystallize on the surface. This leads to self-replenishment of the surface of ionogels even after mechanical damage. The incorporation of [C₆ C₁ im][NTf₂ ] provides the antimicrobial efficacy of ionogels while the crystals of [C₁₈ C₁ im][NTf₂ ] serve as a skeleton maintaining [C₆ C₁ im][NTf₂ ] on the surface. By heating, the ionogel surface transforms from solid to liquid-infused state-the removal of biofilms/bacteria developed under a long time of colonization is facilitated. The antimicrobial efficacy is maintained even after several cycles of biofilm formation and detachment. This work provides an opportunity to apply ionogels as functional coatings with renewable antibiofouling properties.

Ionic Liquid-Grafted Polyamide 6 by Radiation-Induced Grafting: New Strategy To Prepare Covalently Bonded Ion-Containing Polymers and their Application as Functional Fibers

Ion-containing polymers are of great importance for its unique structure and properties. An ion-containing polyamide 6 (PA6) was prepared by grafting an ionic liquid, 1-vinyl-3-butyl imidazole chloride [VBIM][Cl], onto the main chain of PA6 using radiation-induced grafting. The grafted ions on the PA6 main chain significantly influenced the structure and properties of the PA6 matrix. The ions form nanoscale aggregations without inducing further microphase separation. Acting as a physical "cross-linking point," each aggregation enhanced inter/intrachain interactions, which increased the viscosity, storage modulus, and relaxation time and reduced the ability of PA6 to crystallize. However, the bulky cations of the grafted ionic liquid can also be seen as "spacers," which enlarge the distance among chains and reduce the strength of the hydrogen bonds inherently existing in the PA6 matrix. The "cross-linking points" and "spacers" of ions as well as the hydrogen bonds of PA6 take effect collectively in the system. Moreover, the ion-containing PA6 retains good melt processability compared with PA6, despite increased viscosity, and can be easily melt-spun into fibers. Fibers prepared from ion-containing PA6 showed improved mechanical properties and antistatic performance and exhibited the expected antibacterial properties, especially with regard to Escherichia coli. Inspiringly, covalently bonding ions to the PA6 main chain offers a new strategy for fabricating functional fibers with permanent antistatic and antibacterial properties.

Surface Modified with a Host Defense Peptide-Mimicking β-Peptide Polymer Kills Bacteria on Contact with High Efficacy

Methicillin-resistant Staphylococcus aureus (MRSA) has been one of the major nosocomial pathogens to cause frequent and serious infections that are associated with various biomedical surfaces. This study demonstrated that surface modified with host defense peptide-mimicking β-peptide polymer, has surprisingly high bactericidal activities against Escherichia coli ( E. coli) and MRSA. As surface-tethered β-peptide polymers cannot move freely to adopt the collaborative interactions with bacterial membrane and are too short to penetrate the cell envelop, we proposed a mode of action by diffusing away the cell membrane-stabilizing divalent ions, Ca²⁺ and Mg²⁺. This hypothesis was supported by our study that Ca²⁺ and Mg²⁺ supplementation in the assay medium causes up to 80% loss of bacterial killing efficacy and that the addition of divalent ion chelating ethylenediaminetetraacetic acid into the above assay medium leads to significant recovery of the bacterial killing efficacy. In addition to its potent bacterial killing efficacy, the surface-tethered β-peptide polymer also demonstrated excellent biocompatibility by displaying no hemolysis and supporting mammalian cell adhesion and growth. In conclusion, this study demonstrated the potential of β-peptide polymer-modified surface in addressing nosocomial infections that are associated with various surfaces in biomedical applications.

Role of Cationic Side Chains in the Antimicrobial Activity of C18G

Antimicrobial peptides (AMPs) have been an area of great interest, due to the high selectivity of these molecules toward bacterial targets over host cells and the limited development of bacterial resistance to these molecules throughout evolution. The peptide C18G has been shown to be a selective, broad spectrum AMP with a net +8 cationic charge from seven lysine residues in the sequence. In this work, the cationic Lys residues were replaced with other natural or non-proteinogenic cationic amino acids: arginine, histidine, ornithine, or diaminopropionic acid. These changes vary in the structure of the amino acid side chain, the identity of the cationic moiety, and the pK_a of the cationic group. Using a combination of spectroscopic and microbiological methods, the influence of these cationic groups on membrane binding, secondary structure, and antibacterial activity was investigated. The replacement of Lys with most other cationic residues had, at most, 2-fold effects on minimal inhibitory concentration against a variety of Gram-positive and Gram-negative bacteria. However, the peptide containing His as the cationic group showed dramatically reduced activity. All peptide variants retained the ability to bind lipid vesicles and showed clear preference for binding vesicles that contained anionic lipids. Similarly, all peptides adopted a helical conformation when bound to lipids or membrane mimetics, although the peptide containing diaminopropionic acid exhibited a decreased helicity. The peptides exhibited a wider variety of activity in the permeabilization of bacterial membranes, with peptides containing Lys, Arg, or Orn being the most broadly active. In all, the antibacterial activity of the C18G peptide is generally tolerant to changes in the structure and identity of the cationic amino acids, yielding new possibilities for design and development of AMPs that may be less susceptible to immune and bacterial recognition or in vivo degradation.