Zero-Order Release of Gossypol Improves Its Antifertility Effect and Reduces Its Side Effects Simultaneously

Single-injection subunit vaccine for rabies prevention using lentinan as adjuvant

Current rabies vaccines require 5 doses to provide full protection from the deadly virus, which significantly reduce the compliance of recipients. To minimize the number of immunizations herein single injection vaccines were developed. First a single injection vaccine was designed using rabies virus glycoprotein (G protein) as antigen. A time-controlled release system which uses dynamic layer-by-layer films as erodible coating was employed to accomplish multiply pulsatile releases of G protein. The single-injection vaccine elicits potent humoral and cellular immune responses comparable to the corresponding multi-dose ordinary vaccines because of their similar release pattern of G protein. To further improve its performance, a second single injection vaccine, in which lentinan was added as adjuvant, was designed. This single-injection vaccine again elicits humoral and cellular immune responses comparable to the corresponding multi-dose ordinary vaccines because of their similar release pattern of antigen and adjuvant. In addition, the second single-injection vaccine elicits higher level immune response and provides higher efficiency on virus inhibition than the first one because lentinan can booster immune response.

Single-injection COVID-19 subunit vaccine elicits potent immune responses

Current vaccination schedules, including COVID-19 vaccines, require multiple doses to be administered. Single injection vaccines eliciting equivalent immune response are highly desirable. Unfortunately because unconventional release kinetics are difficult to achieve it still remains a huge challenge. Herein a single-injection COVID-19 vaccine was designed using a highly programmable release system based on dynamic layer-by-layer (LBL) films. The antigen, S1 subunit of SARS-CoV-2 spike protein, was loaded in CaCO₃ microspheres, which were further coated with tannic acid (TA)/polyethylene glycol (PEG) LBL films. The single-injection vaccine was obtained by mixing the microspheres coated with different thickness of TA/PEG films. Because of the unique constant-rate erosion behavior of the TA/PEG coatings, this system allows for distinct multiple pulsatile release of antigen, closely mimicking the release profile of antigen in conventional multiple dose vaccines. Immunization with the single injection vaccine induces potent and persistent S1-specific humoral and cellular immune responses in mice. The sera from the vaccinated animal exhibit robust in vitro viral neutralization ability. More importantly, the immune response and viral inhibition induced by the single injection vaccine are as strong as that induced by the corresponding multiple dose vaccine, because they share the same antigen release profile. STATEMENT OF SIGNIFICANCE: Vaccines are the most powerful and cost-effective weapons against infectious diseases such as COVID-19. However, current vaccination schedules, including the COVID-19 vaccines, require multiple doses to be administered. Herein a single-injection COVID-19 vaccine is designed using a highly programmable release system. This vaccine releases antigens in a pulsatile manner, closely mimicking the release pattern of antigens in conventional multiple dose vaccines. As a result, one single injection of the new vaccine induces an immune response and viral inhibition similar to that induced by the corresponding multiple-dose vaccine approach.

Construction of single-injection vaccine using new time-controlled release system

Single-injection vaccines may overcome issues, such as high cost and poor patient compliance, of the multi-bolus regimes dominantly used in vaccination. However no such vaccine has been commercialized because time-controlled release, an unconventional release kinetics, is difficult to achieve. Here a new time-controlled release system using dynamic layer-by-layer (LBL) film as erodible coating was used to design single-injection vaccine. Unlike commonly used degradable polymers, dynamic LBL film disintegrates at a constant rate, thus allowing distinct pulsatile release of antigen at predetermined intervals. The release pattern of the single-injection vaccine mimics closely to that of ordinary multi-dose regimes. It elicits both humoral and cellular immune responses which are comparable to or even stronger than the corresponding multi-dose regime. In addition, it inhibits tumor growth more effectively. The new vaccine will not only improve patient compliance but also therapeutic outcome.

Ordered Conformation-Regulated Vesicular Membrane Permeability

In nature, the folding and conformation of proteins can control the cell or organelle membrane permeability and regulate the life activities. Here we report the first example of synthetic polypeptide vesicles that regulate their permeability via ordered transition of secondary conformations, in a manner similar to biological systems.  The polymersomes undergo a β-sheet to α-helix transition in response to reactive oxygen species (ROS), leading to wall thinning without loss of vesicular integrity. The change  of membrane structure increases the vesicular permeability and enables specific transport of payloads with different molecular weights.The change of membrane structure increases the vesicular permeability.  As a proof-of-concept, the polymersomes encapsulating enzymes could serve as nanoreactors and carries for glucose-stimulated insulin secretion in vivo inspired by human glucokinase, resulting in safe and effective treatment of type 1 diabetes mellitus in mouse models. This study will help understand the biology of biomembranes and facilitate the engineering of nanoplatforms for biomimicry, biosensing, and controlled delivery applications.

A fragment-based approach identifies an allosteric pocket that impacts malate dehydrogenase activity

Malate dehydrogenases (MDHs) sustain tumor growth and carbon metabolism by pathogens including Plasmodium falciparum. However, clinical success of MDH inhibitors is absent, as current small molecule approaches targeting the active site are unselective. The presence of an allosteric binding site at oligomeric interface allows the development of more specific inhibitors. To this end we performed a differential NMR-based screening of 1500 fragments to identify fragments that bind at the oligomeric interface. Subsequent biophysical and biochemical experiments of an identified fragment indicate an allosteric mechanism of 4-(3,4-difluorophenyl) thiazol-2-amine (4DT) inhibition by impacting the formation of the active site loop, located >30 Å from the 4DT binding site. Further characterization of the more tractable homolog 4-phenylthiazol-2-amine (4PA) and 16 other derivatives are also reported. These data pave the way for downstream development of more selective molecules by utilizing the oligomeric interfaces showing higher species sequence divergence than the MDH active site.

Romero et al. perform NMR-based screening of 1500 fragments to identify fragments that bind at the oligomeric interface of malate dehydrogenase (MDH). Their study indicates an allosteric mechanism impacting enzymatic activity, paving the way for development of more selective molecules and a starting point for the future development of specific MDH inhibitors.

A trifunctional contraceptive gel enhances the safety and quality of sexual intercourse

Current contraceptive methods come with a number of drawbacks, including low efficacy, in the case of commercial contraceptive gels, and a reduction in the quality of sexual intercourse, in the case of condoms. Adding pharmacologically-active agents to contraceptive gels holds the potential to improve sexual experience, and hardbor safety and hygiene. In this study, we fabricated a Carbomer-based contraceptive gel consisting of three agents: tenofovir, gossypol acetate, and nitroglycerin (TGN), with pH adjusted to 4.5 (to be compatible with the vagina). In vitro, the gossypol component of the contraceptive gel proved to be a significantly effective spermicide. When the concentration of gossypol acetate was 10 mg/ml, the spermicidal ability reached 100% after 30s. In addition, tenofovir in the gel significantly inhibited lentiviral transfection efficiency in cell-containing media. In 6 pairs of rats, the gel successfully prevented all females from conceiving after successful mating. Moreover, increased sexual frequency and enhanced erection, which were promoted by the nitroglycerin in the components, were observed in male rats that had the gel applied to their penises. This novel TGN contraceptive gel yielded a higher contraceptive success rate than that of the commercial contraceptive gel (Contragel®). In addition, it has the added benefits to prevent sexually transmitted diseases and improve male libido and erection function during sexual intercourse. Combining three FDA-approved and marketed agents together, our trifunctional TGN gel has a great potential for further translation and commercialization.

Research progress on nanotechnology for delivery of active ingredients from traditional Chinese medicines

There is growing acceptance of traditional Chinese medicines (TCMs) as potential sources of clinical agents based on the demonstrated efficacies of numerous bioactive compounds first identified in TCM extracts, such as paclitaxel, camptothecin, and artemisinin. However, there are several challenges to achieving the full clinical potential of many TCMs, particularly the generally high hydrophobicity and low bioavailability. Recently, however, numerous studies have attempted to circumvent the limited in vivo activity and systemic toxicity of TCM ingredients by incorporation into nanoparticle-based delivery systems. Many of these formulations demonstrate improved bioavailability, enhanced tissue targeting, and greater in vivo stability compared to the native compound. This review summarizes nanoformulations of the most promising and extensively studied TCM compounds to provide a reference for further research. Combining these natural compounds with nanotechnology-based delivery systems may further improve the clinical utility of these agents, in turn leading to more intensive research on traditional medicinal compounds.

Gastric floating tablet improves the bioavailability and reduces the hypokalemia effect of gossypol in vivo

Gossypol (Gos) is a natural polyphenolic compound that has shown a number of valuable biological properties such as antifertility, antioxidation, and antitumor activities. However, the clinical application of Gos has been hindered by its notable adverse effects such as hypokalemia, hemolytic anemia, and so on. Using sustained-release dosage form provides a hopeful solution to this problem. In this study, a gastric floating tablet for sustained-release of Gos (Gos-GFT) was developed using polyvinylpyrrolidone, hydroxypropyl methyl cellulose, ethyl cellulose, lactose, sodium bicarbonate, and magnesium stearate. Gos-GFT had an average weight of around 200 mg with a drug content percentage of around 13.66%. The physicochemical properties of Gos-GFT satisfied the pharmacopoeial requirements for tablets. Gos-GFT was able to float in an acidic medium and had a sustained drug release for over 12 h. In vivo studies showed that the relative bioavailability of Gos-GFT, as compared with Gos powders, was larger than that of a non-gastric floating tablet which was a dosage form used for comparison with Gos-GFT. Furthermore, compared with the Gos powders and the non-gastric floating Gos tablets, Gos-GFT could prolong the in vivo action time of Gos, and significantly relieve hypokalemia which is a major adverse effect of Gos. These properties made Gos-GFT a promising Gos preparation that warrants further investigation for more extensive clinical applications of this natural compound.

A highly programmable platform for sequential release of protein therapeutics

Drug carriers capable of releasing multiple protein therapeutics in an appropriate sequence are highly desirable for the treatment of many diseases. However current systems only allow the sequential release of two or three proteins, and it is difficult to adjust the time intervals between them. Here to solve these problems a new system is designed. The proteins are first encapsulated in CaCO₃ microspheres. Then the microspheres are coated with hydrogen-bonded tannic acid (TA)/polyethylene glycol (PEG) layer-by-layer films. The encapsulated protein does not release from the microsphere until the TA/PEG coating is fully disintegrated. As the TA/PEG coating is eroded at a constant rate, the lag time for protein release is proportional to the coating thickness. To achieve sequential release, one can simply coat the protein-encapsulated microspheres with different thickness TA/PEG films and then mix them. Both in vitro and in vivo tests demonstrate that the proteins can be released from the mixed samples in a sequence according to the thickness of the TA/PEG coatings. The time intervals between the protein releases can be facilely adjusted by adjusting the thickness of the TA/PEG coatings. In addition, sequential release of more than 3 proteins can be facilely achieved.

Hydrogen-Bonded Films for Zero-Order Release of Leuprolide

Leuprolide has been widely used in androgen deprivation therapy for the treatment of advanced prostate cancer, but its use is still limited due to its short half-life. Herein, hydrogen-bonded layer-by-layer films are fabricated from PEGylated leuprolide (PEG-LEU) and tannic acid (TA). Because of its dynamic nature, the film disintegrates gradually in water and releases PEG-LEU and TA. The in vitro release profile indicated perfect zero-order kinetics, which is explained by the unique release mechanism. When implanted subcutaneously in male rats, the films maintain a constant serum drug level. For a 60-bilayer film, the serum drug level is maintained constant for ≈24 days. No initial burst release is observed, suggesting that the in vivo release also follows zero-order kinetics. Initially, an increase in the level of serum testosterone is induced by the released drug, followed by testosterone suppression to a constant level below the castrate level, which could be maintained as long as a constant serum drug level is maintained. Since the new drug carriers avoid an initial burst release of the drug and maintain a constant serum drug level and hence a constant serum testosterone level below the castrate level, these carriers are highly promising for androgen deprivation therapy.

PEGylated leuprolide with improved pharmacokinetic properties

Leuprolide, a gonadotropin-releasing hormone (GnRH) agonist widely used in androgen deprivation therapy for the treatment of advanced prostate cancer, suffers from a short circulating half-life like other peptide therapeutics. As an attempt to improve its pharmacokinetic properties, two PEGylated leuprolides with different molecular weight were synthesized utilizing N-hydroxysuccinimidyl (NHS) conjugation chemistry. The reaction conditions, including reaction temperature, reaction time and feed ratio of the reactants, were optimized to obtain a higher yield. Reverse-phase high performance liquid chromatography (RP-HPLC) characterization indicates a high purity of the resulting conjugates. Matrix-assisted laser desorption mass spectrometry (MALDI-MS) characterization suggests a 1:1 PEGylation. ¹H NMR study reveals that the reaction occurs on the imidazolyl group on the histidine residue and the conjugates are stable in pH7.4 aqueous solutions. The in vitro bioactivity of the conjugates was evaluated using both hormone-sensitive and hormone-insensitive cell lines. It was found that the PEGylated peptides can still counteract the stimulatory action of androgens and the mitogenic action of epidermal growth factor on cell proliferation. The in vivo bioactivity of the conjugates was also tested. Like the unmodified peptide, administration of the conjugates to male rats leads to an initial testosterone surge, followed by a suppression of testosterone secretion. Pharmacokinetics of the drugs after i.v. and s.c. administrations were determined. In both cases, a prolonged circulating half-life, an increased AUC, and a decreased Cl_F were observed for the PEGylated drugs.

A sustained zero-order release carrier for long-acting, peakless basal insulin therapy

A new drug carrier, which mimics physiologic basal insulin, and secretes and releases insulin at a constant rate, was designed.

Gossypol inhibits 5α-reductase 1 and 3α-hydroxysteroid dehydrogenase: Its possible use for the treatment of prostate cancer

Gossypol is a yellow polyphenol isolated from cotton seeds. It has the antitumor activity and it is being tested to treat prostate cancer. However, its underlying mechanisms are still not well understood. The present study investigated the inhibitory effects of gossypol acetate on rat 5α-reductase 1, 3α-hydroxysteroid dehydrogenase, and retinol dehydrogenase 2 for androgen metabolism. Rat 5α-reductase 1, 3α-hydroxysteroid dehydrogenase, and retinol dehydrogenase 2 were expressed in COS-1 cells. Immature Leydig cells that contain these enzymes were isolated from 35-day-old male Sprague Dawley rats. The potency and mode of action of gossypol acetate to inhibit these enzymes in both enzyme-expressed preparations and immature Leydig cells were examined. Molecular docking study of gossypol on the crystal structure of 3α-hydroxysteroid dehydrogenase was performed. Gossypol acetate inhibited 5α-reductase 1 and 3α-hydroxysteroid dehydrogenase with IC₅₀ values of 3.33 ± 0.07 and 0.52 ± 0.06 × 10^-6 M in the expressed enzymes as well as 8.512 ± 0.079 and 1.032 ± 0.068 × 10^-6 M in intact rat immature Leydig cells, respectively. Gossypol acetate inhibited rat 5α-reductase 1 in a noncompetitive mode and 3α-hydroxysteroid dehydrogenase in a mixed mode when steroid substrates were supplied. Gossypol acetate weakly inhibited retinol dehydrogenase 2 with IC₅₀ value over 1 × 10^-4 M. Molecular docking analysis showed that gossypol partially bound to the steroid-binding site of the crystal structure of rat 3α-hydroxysteroid dehydrogenase. Gossypol acetate is a potent inhibitor of rat 5α-reductase 1 and 3α-hydroxysteroid dehydrogenase, possibly inhibiting the formation of androgen in the prostate cancer cells.

Gossypol Promotes Bone Formation in Ovariectomy-Induced Osteoporosis through Regulating Cell Apoptosis

Osteoporosis is among the most common forms of age-related diseases, especially for females, which has been a grave public health problem. Drug therapies have shown promising outcomes to promote bone formation and bone density. This study identified a novel potential drug, gossypol, for the treatment of osteoporosis. Treatments of ovariectomy-induced osteoporosis mice with gossypol significantly increased serum osteocalcin and osteoprotegerin (OPG) levels; meanwhile they decreased serum RANKL levels. Microcomputed tomography (microCT) analysis showed that treatment of gossypol improved bone density and strength and decreased bone postyield displacement for both medullar and cortical bones. In vitro experiments also showed that gossypol increased cell viability in a time- and dose-dependent manner. Furthermore, incubation of the osteoblast MC3T3-E1 cells with gossypol inhibited cell apoptosis through intrinsic apoptotic pathway as evidenced by the Annexin V/PI assay, TUNEL assay, biochemical analysis, and western blot assays. Moreover, the classical Wnt/β-catenin signaling pathway was found to be regulated by gossypol treatments. Inhibition of Wnt/β-catenin signaling reversed the prevention effects of gossypol in osteoporosis. Our findings provided novel clues for the treatment of osteoporosis in clinic.

Glycerol-Silicone Elastomers as Active Matrices with Controllable Release Profiles

Drug release regimes must be controlled for the optimal therapeutic effect. Although it is relatively straightforward to create first-order release matrices, it can be challenging to avoid an initial burst. Matrices with zero-order profiles are perceived to be beneficial in many cases but are even more difficult to formulate. We describe the straightforward synthesis of elastomeric composites prepared from silicone in which the active substance is dispersed in glycerol. The release of glycerol-soluble actives from the films of these materials was shown to be tunable with respect to the order of release (zero- or first-order) simply by changing the glycerol content. Importantly, release from the elastomers showed no burst effect. The discrete glycerol domains embedded within a silicone matrix act as reservoirs for active substances. Upon contact with aqueous media, the active substances are released from the matrices exhibiting zero-order, near zero-order, or first-order release kinetics. Various parameters that could influence the release process, including glycerol content, glycerol domain size, or membrane thickness, are thoroughly investigated, elucidating guidelines for creating matrices capable of delivering the active substances at desired rates. Additionally, the composites proved to absorb significant amounts of liquid water (up to 1850% of sample mass), a feature that can be tuned by the manipulation of the composite structure.