Harnessing the Chemical Diversity of the Natural Product Magnolol for the Synthesis of Renewable, Degradable Neolignan Thermosets with Tunable Thermomechanical Characteristics and Antioxidant Activity

4D Printable Salicylic Acid Photopolymers for Sustained Drug Releasing, Shape Memory, Soft Tissue Scaffolds

3D printing of pharmaceuticals offers a unique opportunity for long-term, sustained drug release profiles for an array of treatment options. Unfortunately, this approach is often limited by physical compounding or processing limitations. Modification of the active drug into a prodrug compound allows for seamless incorporation with advanced manufacturing methods that open the door to production of complex tissue scaffold drug depots. Here we demonstrate this concept using salicylic acids with varied prodrug structures for control of physical and chemical properties. The role of different salicylic acid derivatives (salicylic acid, bromosalicylic allyl ester, iodosalicylic allyl ester) and linker species (allyl salicylate, allyl 2-(allyloxy)benzoate, allyl 2-(((allyloxy)carbonyl)oxy)benzoate) were investigated using thiol-ene cross-linking in digital light processing (DLP) 3D printing to produce porous prodrug tissue scaffolds containing more than 50% salicylic acid by mass. Salicylic acid photopolymer resins were all found to be highly reactive (solidification within 5 s of irradiation at λ = 405 nm), while the cross-linked solids display tunable thermomechanical behaviors with low glass transition temperatures (Tgs) and elastomeric behaviors, with the carbonate species displaying an elastic modulus matching that of adipose tissue (approximately 65 kPa). Drug release profiles were found to be zero order, sustained release based upon hydrolytic degradation of multilayered scaffolds incorporating fluorescent modeling compounds, with release rates tuned through selection of the linker species. Cytocompatibility in 2D and 3D was further demonstrated for all species compared to polycarbonate controls, as well as salicylic acid-containing composites (physical incorporation), over a 2-week period using murine fibroblasts. The use of drugs as the matrix material for solid prodrug tissue scaffolds opens the door to novel therapeutic strategies, longer sustained release profiles, and even reduced complications for advanced medicine.

Chemically Recyclable Biobased Non-Isocyanate Polyurethane Networks from CO2 -Derived Six-membered Cyclic Carbonates

Non-isocyanate polyurethanes (NIPUs) are widely studied as sustainability potential, because they can be prepared without using toxic isocyanates in the synthesis process. The aminolysis of cyclic carbonate to form NIPUs is a promising route. In this work, a series of NIPUs is prepared from renewable bis(6-membered cyclic carbonates) (iEbcc) and amines. The resulting NIPUs possess excellent mechanical properties and thermal stability. The NIPUs can be remolded via transcarbamoylation reactions, and iEbcc-TAEA-10 (the molar ratio of tris(2-aminoethyl)amine in amines is 10%) still get a recovery ratio of 90% in tensile stress after three cycles of remolding. In addition, the obtained materials can be chemically degraded into bi(1,3-diol) precursors with high purity (>99%) and yield (>90%) through alcoholysis. Meanwhile, the degraded products can be used to regenerate NIPUs with similar structures and properties as the original samples. The synthetic strategy, isocyanate-free and employing isoeugenol and carbon dioxide (CO2 ) as building blocks, makes this approach an attractive pathway to NIPU networks taking a step toward a circular economy.

Bioinspired Natural Magnolol-Based Adhesive with Strong Adhesion and Antibacterial Properties for Application in Wet and Dry Environments

The development of environmentally friendly, green, and nontoxic adhesives with excellent dry and wet adhesion properties is of great attraction. In nature, barnacles and mussels exhibit strong adhesion by secreting a hydroxyl-rich dopa. Inspired by their adhesion mechanism, a simple biobased MAG-PETMP (MP) adhesive was prepared from magnolol (MAG) and pentaerythritol tetra (3-mercaptopropionate) (PETMP) by a thiol-ene click chemistry reaction. MP as an adhesive exhibits high bond strength with other substrates due to hydrogen bonds formed by the abundant hydroxyl groups at the interface and shows an inherent thermosetting network structure. Since MP has a thermosetting network, it exhibits excellent thermal stability, solvent resistance, and high mechanical strength, which make the adhesive stable in a humid environment. The cross-linking degree of MP can be easily controlled by adjusting the molar ratio of MAG and PETMP. Among the synthesized samples, the elongation at break of the MP 1 formulation is 174.27%, which makes it promising for use as a flexible adhesive. Moreover, the inherent antibacterial properties of MAG enable MP to exhibit antimicrobial properties and antibacterial adhesion to some extent. This work provides a simple biomimetic strategy that could enable the application of MAG for adhesives.

Sustainable xanthophylls-containing poly(ε-caprolactone)s: synthesis, characterization, and use in green lubricants

Three xanthophylls [(3R,3'R,6'R)-lutein (1), (3R,3'S)-zeaxanthin (2), and (3R,3'S)-astaxanthin (3)] were used for the first time as initiators in the ring-opening polymerization (ROP) of ε-caprolactone (CL) catalyzed by tin(ii) 2-ethylhexanoate [Sn(Oct)2] for the synthesis of novel sustainable xanthophyll-containing poly(ε-caprolactone)s (xanthophylls-PCL). The obtained polyesters were characterized by 1H and 13C NMR, FT-IR, DSC, SEC, and MALDI-TOF MS, and their use as additives in green lubricants was evaluated using a sliding friction test under boundary conditions. Xanthophylls-PCL were obtained with good conversions and with molecular weights determined by SEC to be between 2500 and 10 500 Da. The thermal properties of xanthophyll-polyesters showed a crystalline domain, detected by DSC. Lastly, the green lubricant activity of these polymers was evaluated and the results showed that xanthophylls-PCL could be employed as additives for biodegradable lubricant applications since they have better tribological behavior than current additives, which demonstrates their potential as future commercial materials with interesting eco-friendly properties for diverse applications.

Bioderived 4D Printable Terpene Photopolymers from Limonene and β-Myrcene

Green manufacturing and reducing our cultural dependency on petrochemicals have been topics of growing interest in the past decade, particularly for three-dimensional (3D) printable photopolymers where often toxic solvents and reagents have been required. Here, a simple solvent-free, free-radical polymerization is utilized to homo- and copolymerize limonene and β-myrcene monomers to produce oligomeric photopolymers (M_n < 11 kDa) displaying Newtonian, low viscosities (∼10 Pa × s) suitable for thiol-ene photo-cross-linking, yielding photoset materials in a digital light processing (DLP)-type 3D printer. The resulting photosets display tunable thermomechanical properties (poly(limonene) displays elastic moduli exceeding 1 GPa) compared with previous works focusing on monomeric terpenes as well as four-dimensional (4D) shape memory behavior. The utility of such photopolymers for biomedical applications is briefly considered on the premise of the hydrophilic nature (measured by contact angle) as well as their cytocompatibility upon seeding films with macrophages. These terpene-derived, green 4D photopolymers are shown to have promising physical behaviors suitable for an array of manufacturing and 3D printing applications.

Development of Membrane-Active Honokiol/Magnolol Amphiphiles as Potent Antibacterial Agents against Methicillin-Resistant Staphylococcus aureus (MRSA)

Currently, infections caused by drug-resistant bacteria have become a new challenge in anti-infective treatment, seriously endangering public health. In our continuous effort to develop new antimicrobials, a series of novel honokiol/magnolol amphiphiles were prepared by mimicking the chemical structures and antibacterial properties of cationic antimicrobial peptides. Among them, compound 5i showed excellent antibacterial activity against Gram-positive bacteria and clinical MRSA isolates (minimum inhibitory concentrations (MICs) = 0.5-2 μg/mL) with low hemolytic and cytotoxic activities and high membrane selectivity. Moreover, 5i exhibited rapid bactericidal properties, low resistance frequency, and good capabilities of disrupting bacterial biofilms. Mechanism studies revealed that 5i destroyed bacterial cell membranes, resulting in bacterial death. Additionally, 5i displayed high biosafety and potent in vivo anti-infective potency in a murine sepsis model. Our study indicates that these honokiol/magnolol amphiphiles shed light on developing novel antibacterial agents, and 5i is a potential antibacterial candidate for combating MRSA infections.

Building biobased, degradable, flexible polymer networks from vanillin via thiol–ene “click” photopolymerization

A new biobased allyl ether monomer with acetal groups is synthesized from renewable vanillin for building flexible transparent thiol–ene networks with good degradability under mild acidic conditions.

Development of Poly(1,8-octanediol-co-citrate-co-ascorbate) Elastomers with Enhanced Ascorbate Performance for Use as a Graft Coating to Prevent Neointimal Hyperplasia

Small-diameter expanded polytetrafluoroethylene (ePTFE) graft surfaces have poor long-term patency due to limited endothelial cell (EC) coverage and anastomotic intimal hyperplasia. Multifunctional elastomers that coat the ePTFE graft surface to promote EC adhesion while simultaneously inhibiting intimal hyperplasia are highly desirable. Poly(diol-co-citrate) (PDC), a thermoset elastomer, is biodegradable, biocompatible, and mimics vascular mechanical properties. Engineering antioxidant components into PDC polymeric structures improves biocompatibility by attenuating oxidative stress yet is limited by bioavailability. Herein, we develop a new ascorbate protection and deprotection strategy (APDS) for loading bioactive ascorbic acid into the structure of PDC elastomers to improve poly(1,8-octanediol-co-citrate-co-ascorbate) (POCA) prepolymer ascorbate activity. Elastomers cured from APDS POCA prepolymers provide twice the active ascorbate sites on the elastomer surface (35.19 ± 1.64 ng mg-1 cm-2) versus unprotected POCA (Un.POCA, 18.31 ± 0.97 ng mg-1 cm-2). APDS POCA elastomers displayed suitable mechanical properties for vascular graft coating [Young's modulus (2.15-2.61 MPa), elongation (189.5-214.6%) and ultimate tensile strength (2.73-3.61 MPa)], and superior surface antioxidant performance through 1,1-diphenyl-2-picrylhydrazyl free radical scavenging and lipid peroxidation inhibition as compared to poly(1,8-octanediol-co-citrate) (POC) and Un.POCA. Hydrolytic degradation of APDS POCA occurred within 12 weeks under physiological conditions with a mass loss of 25.8 ± 3.4% and the degradation product retaining ascorbate activity. APDS POCA elastomer surfaces supported human aortic endothelial cell proliferation while inhibiting human aortic smooth muscle cell proliferation in vitro. APDS POCA elastomer surfaces displayed superior decomposition of S-nitrosothiols compared to POC and Un.POCA. Taken together, these findings indicate the potential of APDS POCA elastomers to serve as bioactive, therapeutic coatings that enhance the long-term patency of small diameter ePTFE grafts.

Selective Reactivity of Myrcene for Vat Photopolymerization 3D Printing and Postfabrication Surface Modification

Biosourced materials are gaining interest industrially, but there are still limitations on the library of available materials suitable for advanced manufacturing, especially using photopolymerization-based processing techniques. Terpenes, such as myrcene, are naturally produced materials possessing structural features, specifically alkenes, that avail themselves for such techniques. Free-radical and anionic polymerization techniques were used to explore molecular architecture, such as branching, as well as molecular weight and dispersity on physical properties prior to the production of 3D printing photopolymer resins. The polymyrcene resins were printed into dogbones and mold templates for soft materials. Model reactions with monofunctional thiols were used to demonstrate the potential for postpolymerization and fabrication functionalization, accompanying a physical demonstration where the surface hydrophobicity of polymyrcene could be tuned from superhydrophobic when using an alkyl chain monothiol (greater than 100° water contact angle) to a hydrophilic surface displaying a water contact angle of less than 45° compared with that of the unmodified surface (∼60°). Tunable bulk and surface properties are a unique feature for 3D printing materials and demonstrate the potential of polymyrcene and other biosourced photopolymers to a wide range of research applications.

Terpene- and terpenoid-based polymeric resins for stereolithography 3D printing

Thiol–ene ‘click’ reactions between terpenes and a four-arm thiol were utilized to produced thermoset 3D printed structures using vat photopolymerisation.