Bulk Organocatalytic Synthetic Access to Statistical Copolyesters from l-Lactide and ε-Caprolactone Using Benzoic Acid

Microplastics and biobased polymers to combat plastics waste

Microplastics (MPs) have become the major global concern due to their adverse effects on the environment, human health, and hygiene. These complex molecules have numerous toxic impacts on human well-being. This review focuses on the methods for chemically quantifying and identifying MPs in real-time samples, as well as the detrimental effects resulting from exposure to them. Biopolymers offer promising solutions for reducing the environmental impact caused by persistent plastic pollution. The review also examines the significant progress achieved in the preparation and modification of various biobased polymers, including polylactic acid (PLA), poly(ε-caprolactone) (PCL), lignin-based polymers, poly-3-hydroxybutyrate (PHB), and poly(hydroxyalkanoates) (PHA), which hold promise for addressing the challenges associated with unplanned plastic waste disposal.

Ring-Opening Polymerization of Trimethylene Carbonate with Phosphazene Organocatalyst

Aliphatic polycarbonate (APC) compounds are an important class of biodegradable materials with excellent biocompatibility, good biodegradability, and low toxicity, and the study of these compounds and their modification products aims to obtain biodegradable materials with better performance. In this context, the ring-opening polymerization (ROP) of trimethylene carbonate (TMC) from a low nucleophilic organic superbase of phosphazene (t-BuP₄) as a catalyst and benzyl alcohol (BnOH) as an initiator at room temperature was carefully studied to prepare poly(trimethylene carbonate) (PTMC) which is one of the most studied APC. ¹H NMR and SEC measurements clearly demonstrate the presence of a benzyloxy group at the α-terminus of the obtained PTMC homopolymers while investigation of the polymerization kinetics confirms the controlled/living nature of t-BuP₄-catalyzed ROP of TMC. On the basis of this, the block copolymerization of TMC and δ-valerolactone (VL)/ε-caprolactone (CL) was successfully carried out to give PTMC-b-PCL and PTMC-b-PVL copolymers. Furthermore, PTMC with terminal functionality was also prepared with the organocatalytic ROP of TMC through functional initiators. We believe that the present ROP system is a robust, highly efficient, and practical strategy for producing excellent biocompatible and biodegradable PTMC-based materials.

Tuning the Properties of Ester-Based Degradable Polymers by Inserting Epoxides into Poly(ϵ-caprolactone)

A series of ester-ether copolymers were obtained via the reaction between α,ω-dihydroxyl poly(ϵ-caprolactone) (PCL) and ethylene oxide (EO) or monosubstituted epoxides catalyzed by strong phosphazene bases. The two types of monomeric units were distributed in highly random manners due to the concurrence of epoxide ring-opening and fast transesterification reactions. The substituent of epoxide showed an interesting bidirectional effect on the enzymatic degradability of the copolymer. Compared with PCL, copolymers derived from EO exhibited enhanced hydrophilicity and decreased crystallinity which then resulted in higher degradability. For the copolymers derived from propylene oxide and 1,2-butylene oxide, the hydrophobic alkyl pendant groups also allowed lower crystallinity of the copolymers thus higher degradation rates. However, further enlarging the pendant groups by using styrene oxide or 2-ethylhexyl glycidyl ether caused a decrease in the degradation rate, which might be ascribed to the higher bulkiness hindering the contact of ester groups with lipase.

Synthesis of N-Methyl-o-phenylenediamine-Bridged Bis(phenolato) Lanthanide Alkoxides and Their Catalytic Performance for the (Co)Polymerization of rac-Butyrolactone and l-Lactide

A series of lanthanide alkoxo complexes supported by ONNO salalen ligands were synthesized and characterized. A one-pot reaction of LH₂ (L = (2-O-C₆H₂-^tBu₂-3,5)CH═N-C₆H₄-N(CH₃)CH₂(2-O-C₆H₂-^tBu₂-3,5)) with LnCp₃(THF) in a 1:1 molar ratio followed by the addition of 1 equiv of ROH (R = Bn, ⁱPr, and CF₃CH₂), afforded the dimeric lanthanide alkoxo complexes [LLn(μ-OCH₂Ph)]₂ [Ln = Lu (1), Yb (2), Sm (3), Nd (4)], [L²Yb(μ-OⁱPr)]₂ (5), and [L²Yb(μ-OCH₂CF₃)]₂ (6) in good isolated yields. All these lanthanide complexes were characterized by elemental analysis and FT-IR spectroscopy. In addition, complex 1 has been characterized by NMR spectroscopy. Single-crystal X-ray diffraction analysis of complexes 1, 2, 5, and 6 showed that these lanthanide alkoxo complexes are dimeric in the solid state. Complexes 1-6 showed good activity toward the homopolymerization of rac-butyrolactone (rac-BBL) to give atactic PHB, and ionic radii of central metals have profound influence on the polymerization. The polymerization behavior of l-lactide (l-LA) initiated by complex 2 was also explored. The kinetic study revealed that the polymerizations of rac-BBL and l-LA initiated by salalen lanthanide akoxide are first order for both the monomer and the initiator concentrations. Furthermore, it was found that complexes 1 and 2 showed good activity in the copolymerization of l-LA and rac-BBL, affording gradient copolymers.

Ultrafast ring-opening copolymerization of lactide with glycolide toward random poly(lactic-co-glycolic acid) copolymers by organophosphazene base and urea binary catalysts

The preparation of poly(lactic-co-glycolic acid) (PLGA) copolymers with controllable random microstructures remains as a challenge due to the much higher reactivity of glycolide (GA) compared to lactide (LA). In this...

Activated Monomer Mechanism (AMM) in Cationic Ring-Opening Polymerization. The Origin of the AMM and Further Development in Polymerization of Cyclic Esters

The origin of the activated monomer mechanism (AMM) in cationic ring-opening polymerization (CROP) is described first. Then, conditions leading to the active chain end (ACE) mechanism and AMM are compared, as well as methods allowing to distinguish between these two mechanisms. These methods are based on the "ion trapping" of the active ionic species using highly basic phosphines or by comparing ACE and AMM kinetics of polymerization. The major factors deciding on the actual mechanism include: basicity of the monomers, ring strain, and the presence of the protic additives in the reaction system. These factors are tabulated for major cyclic ethers and cyclic esters. The historically evolved subsequent steps of AMM in the polymerization of cyclic esters are described: from the first experiments with trialkyloxonium salts, precursors of protonic acids, and added alcohols, via HCl as catalyst, and then CF₃S(═O)₂OH (polymerizing lactides) to the most popular derivatives of phosphoric acid, like diphenyl phosphate. Conditions allowing to synthesize poly(ε-caprolactone) (PCL), according to AMM-CROP, with molar mass up to 10⁵ g·mol^-1, are described as well as methods to polymerize CL with a protic initiator and acidic catalyst in one molecule. Then various methods enhancing the activity of the polymerizing systems are compared, based predominantly on hydrogen bonding, either to the polymer active end group (usually the hydroxyl group) or to the acid anion. Finally, kinetic equations for ACE and AMM are compared, and it is shown that the majority of the AMM-CROP systems, mostly studied for CL and lactides, proceed as living/controlled polymerizations. Since polymer end groups are hydroxyl groups, then, as it was shown in several papers, any initiator with one or many hydroxyl groups provides macromolecules with the corresponding architecture. The papers on synthetic methods are not discussed in detail.

Stereoretention in the Bulk ROP of l-Lactide Guided by a Thermally Stable Organocatalyst

Polylactide (PLA) has emerged as one of the most promising bio-based alternatives to petroleum-based plastics, mainly because it can be produced from the fermentation of naturally occurring sugars and because it can be industrially compostable. In spite of these benefits, the industrial ring-opening polymerization (ROP) of l-lactide (L-LA) still requires the use of highly active and thermally stable metal-based catalysts, which have raised some environmental concerns. While the excellent balance between activity and functional group compatibility of organic acid catalysts makes them some of the most suitable catalysts for the metal-free ROP of L-LA, the majority of these acids are highly volatile and subject to decomposition at high temperature, which limits their use under industrially relevant conditions. In this work we exploit the use of a nonstoichiometric acid–base organocatalyst to promote the solvent-free and metal-free ROP of L-LA at elevated temperatures in the absence of epimerization and transesterification. To do so, a stable acidic complex was prepared by mixing 4-(dimethylamino)pyridine (DMAP) with 2 equiv of methanesulfonic acid (MSA). Both experimental and computational results indicate that DMAP:MSA (1:2) not only is highly thermally stable but also promotes the retention of stereoregularity during the polymerization of L-LA, leading to PLLA with a molar mass of up to 40 kg mol^–1 and a chiral purity in excess of 98%. This result provides a new feature to exploit in organocatalyzed polymerization and in the design of new catalysts to facilitate the path to market.

Copolyesters of ε-caprolactone and l-lactide catalyzed by a tetrabutylammonium phthalimide-N-oxyl organocatalyst

Aliphatic polyesters are biocompatible materials that can be used in biomedical applications. We report here the use of tetrabutylammonium phthalimide-N-oxyl catalyst (TBAPINO), as a thermally stable organocatalyst for the ring-opening polymerization (ROP) of cyclic esters under mild conditions. In the solution ROP of ε-caprolactone (ε-CL), quantitative conversion and M_n of ∼20 000 g mol⁻¹ are achieved in a wide temperature range from −15 to 60 °C. Under bulk condition, the conversion of ε-CL reaches over 85% at 120 °C within 2 h. The living ROP character of l-lactide (l-LA) catalyzed over TBAPINO is proved by multiple additions of monomer in the bulk polymerization. The catalyst shows comparable selectivity towards the ring-opening polymerization of l-LA and ε-CL. Their copolymerization over TBAPINO is carried out in one-pot bulk condition in terms of the reaction time, monomer feed ratio, and sequence of addition. The colorless poly(ε-caprolactone-co-lactide) (PCLA) is obtained with considerable conversion of both monomers with the M_n over 22 000 g mol⁻¹.

By utilizing tetrabutylammonium phthalimide-N-oxyl organocatalyst, copolymer PCLA with M_n over 20 000 g mol⁻¹ was synthesized by sequential ring-opening polymerization of ε-caprolactone and l-lactide under bulk conditions.

Synthesis of Poly(l-lactide-co-ε-caprolactone) Copolymer: Structure, Toughness, and Elasticity

Biodegradable and bioabsorbable polymers have drawn considerable attention because of their mechanical properties that mimic human soft tissue. Poly(l-lactide-co-ε-caprolactone) (PLCL), the copolymer of L-lactic (LA) and ε-caprolactone (CL), has been applied in many tissue engineering and regenerative medicine fields. However, both the synthesis of PLCL and the structure-activity relationship of the copolymer need to be further investigated to allow tuning of different mechanical properties. The synthesis conditions of PLCL were optimized to increase the yield and improve the copolymer properties. The synthetic process was evaluated by while varying the molar ratio of the monomers and polymerization time. The mechanical properties of the copolymer were investigated from the macroscopic and microscopic perspectives. Changes in the polymerization time and feed ratio resulted in the difference in the LA and CL content, which, in turn, caused the PLCL to exhibit different properties. The PLCL obtained with a feed ratio of 1:1 (LA:CL) and a polymerization time of 30 h has the best toughness and elasticity. The developed PLCL may have applications in dynamic mechanical environment, such as vascular tissue engineering.

Accelerating effect of crown ethers on the lactide polymerization catalysed by potassium acetate

Recent advances in catalysis enriched the toolbox to prepare well-defined polyester materials such as polylactide (PLA).

Syntheses, structures and catalytic activity of tetranuclear Mg complexes in the ROP of cyclic esters under industrially relevant conditions

Tetranuclear magnesium imino(phenolate) complexes Mg₄(L^1–4)₄ are excellent catalysts for the ROP of bulk rac-lactide and ε-caprolactone under industrially relevant conditions.

Amphiphilic Block Copolymer PCL-PEG-PCL as Stationary Phase for Capillary Gas Chromatographic Separations

This work presents the first example of utilization of amphiphilic block copolymer PCL-PEG-PCL as a stationary phase for capillary gas chromatographic (GC) separations. The PCL-PEG-PCL capillary column fabricated by static coating provides a high column efficiency of 3951 plates/m for n-dodecane at 120 °C. McReynolds constants and Abraham system constants were also determined in order to evaluate the polarity and possible molecular interactions of the PCL-PEG-PCL stationary phase. Its selectivity and resolving capability were investigated by using a complex mixture covering analytes of diverse types and positional, structural, and cis-/trans-isomers. Impressively, it exhibits high resolution performance for aliphatic and aromatic isomers with diverse polarity, including those critical isomers such as butanol, dichlorobenzene, dimethylnaphthalene, xylenol, dichlorobenzaldehyde, and toluidine. Moreover, it was applied for the determination of isomer impurities in real samples, suggesting its potential for practical use. The superior separation performance demonstrates the potential of PCL-PEG-PCL and related block copolymers as stationary phases in GC and other separation technologies.